Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “improvement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Optimization of matrix viscosity improves polypropylene fiber dispersion and properties of engineered cementitious composites

Engineered cementitious composites (ECC) is a durable cementitious material with high tensile ductility and strain-hardening characteristics. Although considered as a cost-effective fiber for ECC, polypropylene (PP) fiber is reportedly difficult to disperse in mortar matrix due to its high aspect ratio and hydrophobicity. In this study, the matrix viscosity of a low-carbon ECC based on limestone calcined clay cement was tailored as a variable to improve PP fiber dispersion under a pre-determined mixing protocol. The effect of matrix viscosity on the composite fresh and hardened properties was investigated experimentally. Results suggested an optimal range of matrix viscosity (10.3–11.5 Pa . s) favors the composite tensile strength and strain capacity at 28 days. At the optimal state with a 0.1 % viscosity modifying admixture (VMA)-to-binder mass ratio, PP-ECC achieved 7.0 % tensile strain capacity and 3.5 MPa ultimate tensile strength. When matrix viscosity falls outside the desired range, both ultimate tensile strength and strain capacity were diminished. By tailoring the VMA dosage, the matrix viscosity can be adjusted for desired fiber dispersion, workability, and mechanical properties. Finally, the findings of this study provide a technical reference for the practical design and application of PP-ECC.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Improved stellarator permanent magnet designs through combined discrete and continuous optimizations

A common optimization problem in the areas of magnetized plasmas and fusion energy is the design of magnets to produce a given three-dimensional magnetic field distribution to high precision. When designing arrays of permanent magnets for stellarator plasma confinement, such problems have tens of thousands of degrees of freedom whose solutions, for practical reasons, should be constrained to discrete spaces. We perform a direct comparison between two algorithms that have been developed previously for this purpose, and demonstrate that composite procedures that apply both algorithms in sequence can produce substantially improved results. One approach uses a continuous, quasi-Newton procedure to optimize the dipole moments of a set of magnets and then projects the solution onto a discrete space. The second uses an inherently discrete greedy optimization procedure that has been enhanced and generalized for this work. Further, the approaches are both applied to design arrays cubic rare-Earth permanent magnets to confine a quasi-axisymmetric plasma with a magnetic field on axis of 0.5 T. The first approach tends to find solutions with higher field accuracy, whereas the second can find solutions with substantially (up to 30%) fewer magnets. When the approaches are combined, they can obtain solutions with magnet quantities comparable to the second approach while matching the field accuracy of the first.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Parallel diffusion operator for magnetized plasmas with improved spectral fidelity

Diffusive transport processes in magnetized plasmas are highly anisotropic, with fast parallel transport along the magnetic field lines sometimes faster than perpendicular transport by orders of magnitude. This constitutes a major challenge for describing non-grid-aligned magnetic structures in Eulerian (grid-based) simulations. Here, the present paper describes and validates a new method for parallel diffusion in magnetized plasmas based on the anti-symmetry representation [Halpern and Waltz, Phys. Plasmas 25, 060703 (2018)]. In the anti-symmetry formalism, diffusion manifests as a flow operator involving the logarithmic derivative of the transported quantity. Qualitative plane wave analysis shows that the new operator naturally yields better discrete spectral resolution compared to its conventional counterpart. Numerical simulations comparing the new method against existing finite difference methods are carried out, showing significant improvement. In particular, we find that combining anti-symmetry with finite differences in diagonally staggered grids essentially eliminates the so-called “artificial numerical diffusion” that affects conventional finite difference and finite volume methods.

Anisotropic diffusion↗
DOE OSTI2024

Improving 2D Schottky contacts using an intralayer strategy

An additional insulating layer between the electrode and semiconductor is beneficial to reduce the interfacial coupling and build two-dimensional (2D) Schottky contacts. Here, an intralayer strategy was proposed by using metallic 2D Bi 2 Sr 2 CaCu 2 O 8+δ (BSCCO) as contacts on 2D semiconductors. Inside a BSCCO monolayer, a conductive layer is sandwiched between insulating layers. Thus, the BSCCO contact has its own insulating layer, which is ultra-thin, single crystalline, and of high quality. This native layer could reduce the metal-induced gap state and thus weaken the interfacial Fermi level pinning effect. Such 2D Schottky diodes thus have barrier heights of 300 mV and a rectification ratio of 104. Furthermore, 2D metal-semiconductor field-effect transistors with BSCCO Schottky gate have a high on-off ratio, low leakage current, and low subthreshold swing value near the theoretical limit. The intralayer structure offers a new approach to improve the 2D Schottky junctions and has prospects in 2D electronics and optoelectronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Niobium addition improves the corrosion resistance of TiHfZrNb x high-entropy alloys in Hanks’ solution

High-strength TiHfZrNb x high-entropy alloys could become the ideal materials for small-diameter endovascular stents once their corrosion resistance in the physiological milieu is confirmed. Here, this work aims at evaluating the corrosion resistance of a TiHfZrNb x high-entropy-alloys family in Hanks’ solution at 37 °C and revealing the influence of niobium on the mechanisms of dissolution and passivation. The alloys were subjected to a series of static and dynamic electrochemical tests and surface characterization, employing the static/dynamic/cyclic polarizations, impedance spectroscopy, XPS, AFM, and SEM. Results confirm a higher corrosion resistance of the alloys compared to that of CP-Ti and Ti6Al4V. The addition of niobium considerably improves the microstructural homogeneity that ensures a low dissolution rate and a greater resistance of the film due to the lower concentration of point defects. The passive film behaves as an n-type semiconductor and is composed of a mixture of TiO 2 , Nb 2 O 5 , ZrO 2 , and HfO 2 oxides, with the presence of metallic hydroxides on the outermost layer. A detailed description of the niobium influence on the mechanisms of the dissolution and passivation is presented in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The role of nonmetallic ion substitution in perovskite LaCoO 3 for improved oxygen evolution reaction activity

Transition metal perovskite (ABO 3 ) is an emerging type of oxygen evolution reaction (OER) electrocatalyst that shows reasonably good activity and moderate stability. Although efforts have been made to improve perovskite’ OER performance by various element substitution at A/B-site, the influence of ion, particularly non-metallic ion, substitutions on the OER mechanism are rarely studied. More and more evidence has shown that the metal-center theory has failed to explain lots of OER-related phenomena. Therefore, it is urgent to understand how the cation and anion sites in perovskite determine OER performance. In this work, we used a Fe and P co-doped LaCoO 3 as a model system to explore the influence of substitution in perovskite by combining operando/ex-situ X-ray characterization and density functional theory (DFT). We observed enhanced OER catalytic activities in co-doped materials, which are attributed to the stronger transition-metal-oxygen-bonding-covalency (TMOBC). The detailed analyses by O K-edge XAS, electrochemical performance, and DFT suggest that the hybridization between O 2p and transition metal 3d e g orbitals could be a more credible descriptor of perovskite for OER, which is the combination of e g orbital theory and TMOBC theory. The finding in our work provides insights into the OER catalysis mechanism on metal oxides, which could guide new design of cost-effective oxide electrocatalysts.

25 ENERGY STORAGE↗
DOE OSTI2021

Passive cooling designs to improve heat resilience of homes in underserved and vulnerable communities

Disadvantaged communities face a growing threat to staying safe during heat waves, especially during coincident power outages. This study develops a methodology to evaluate the effectiveness of passive cooling measures (those that operate without power) to improve residential building heat resilience. Building performance is simulated for representative homes and on district scales in two disadvantaged communities in Fresno, California. Eleven passive measures are evaluated using four heat resilience metrics with and without grid power. Results show performance of the mitigation measures varies by building characteristics, surrounding environment, and power scenario. The two most effective measures were installing solar-control window films and adding roof insulation. For pre-1978 single-family homes, these two measures can reduce unmet degree-hours (UDH) indoors by 12% and 11% respectively without grid power, or 28% and 37% with grid power. Their respective UDH reductions at district scale typically range 8% — 20% and 4% — 12% without grid power, or 14% — 44% and 8% — 51% with grid power. Top floors have higher overheating risk than lower floors during extreme heat events with coincident power outages. Natural ventilation can help, reducing UDH by 21% — 26%. The methodology and findings from this study can help cities, communities, and utilities develop effective and targeted strategies to promote greater residential heat resilience.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Co-benefits of subnationally differentiated carbon pricing policies in China: Alleviation of heavy PM 2.5 pollution and improvement in environmental equity

Carbon policies differentiated according to regional disparities have been recognized and recommended. However, the air quality co-benefits of differentiated policies remain unclear. Here we combine a multi-regional dynamic computable general equilibrium (CGE) model and an extend response surface model (ERSM) to investigate the impact of nationally uniform and subnationally differentiated carbon pricing policies on fine particulate matter (PM 2.5 ) concentrations in China. All policies examined lead to the same accumulated national CO 2 emissions (2020–2050), with the 2030 emissions attaining China's national abatement target. We find that, when subnational policies differentiated according to provincial PM 2.5 concentrations are implemented, the higher-than-average carbon price over more polluted provinces results in twice as much reduction in CO 2 and air pollutant emissions in 2050 as the national policy. As a result, the subnational policies cause larger PM 2.5 concentration reductions in these provinces (9%–18%) than the national policy (7%–11%). Also, the subnational policies eliminate high PM 2.5 exposure of over 45 μg/m 3 which 12% people suffer from under the national policy. Overall, the subnational policies substantially reduce regional disparity in PM 2.5 pollution and hence improve environmental equity. The results suggest that subnationally differentiated carbon policies are a promising instrument to mitigate severe pollution and promote environmental equity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Artificial cathode electrolyte interphase for improving high voltage cycling stability of thick electrode with Co-free 5 V spinel oxides

Spinel-type cathode LiNi 0.5 Mn 1.5 O 4 (LNMO) has intrigued the transportation industry due to its high operating voltage and total elimination of the expensive cobalt element. However, LNMO cathode with high mass loading (> 3 mAh/cm 2 in areal capacity) has suffered from excessive capacity degradation upon long cycling. Here, a robust Al 2 O 3 surface layer is introduced to the thick LNMO electrode via atomic layer deposition (ALD). The capacity retention in full cells with the graphite anode is improved from 46.3% to 75.3% after 300 cycles with cutoff voltage up to 4.85 V, while enabling average Coulombic efficiency of 99.9% during the cycling. The post-mortem analyses reveal that the Al 2 O 3 surface layer would convert to Al-O-F /Al-F species upon cycling, offering stable interphase to protect the cathode material. Furthermore, these results demonstrate the significance of surface modification enabling high voltage cathode for next-generation LIBs.

25 ENERGY STORAGE↗
DOE OSTI2023

A reactive wetting strategy improves lithium metal reversibility

The cycling of lithium metal (Li 0 ) anode is often accompanied by irregular lithium plating/stripping, leading to poor Li 0 reversibility, and posing a grand challenge to constructing reliable Li 0 batteries. Hereby, we report a reactive wetting strategy to enable conformal and highly reversible Li 0 plating/stripping through a lithium-reactive substrate. In this study, the reactive wetting, smooth nucleation, and conformal growth behaviors of Li 0 are visualized through in-situ transmission electron microscopy, ex-situ scanning electron microscope, and in-situ optical microscope characterizations. Based on the reactive wetting substrate, high average Coulombic efficiencies (99.0% at 0.5 mA cm -2 for 400 cycles) are realized for Li 0 anodes. By pre-plating Li 0 into the reactive wetting substrate as anodes and leveraging LiFePO 4 as cathodes, high capacity retention (76.0% after 200 cycles in low N/P ratio conditions) is also achieved in the as-constructed Li 0 full cells. This work establishes a fundamental understanding of reactive wetting dynamics of Li 0 and provides a drop-in solution to improving Li 0 reversibility.

25 ENERGY STORAGE↗
DOE OSTI2024

A directional electrode separator improves anodic biofilm current density in a well-mixed single-chamber bioelectrochemical system

In this study, a directional electrode separator (DES) was designed and incorporated into a single-chamber bioelectrochemical system (BES) to reduce migration and reoxidation of hydrogen. This issue arises when H 2 , generated at the cathode, travels to the anode where anodic biofilms use H 2 . To test the feasibility of our design, a 3D-printed BES reactor equipped with a DES was inoculated with anaerobic digestor granules and operated under fed-batch conditions using fermented corn stover effluent. The DES equipped reactor achieved significantly higher current densities (~53 A/m²) compared to a conventional single-chamber BES without a separator (~16 A/m²), showing a 3.3 times improvement. Further, control abiotic electrochemical experiments revealed that the DES exhibited significantly higher proton conductivity (456±127 µS/mm) compared to a proton exchange membrane (67±21 µS/mm) with a statistical significance of P=0.03. The DES also effectively reduced H 2 migration to the anode by 21-fold relative to the control. Overall, incorporating a DES in a single-chamber BES enhanced anodic current density by reducing H 2 migration to the anode.

3D printed BES↗
DOE OSTI2025

Enhancing heat pump water heater performance with embedded phase change materials thermal energy storage: First hour rating improvement and demand response operation

The increasing global emphasis on energy efficiency and sustainability has put heat pump water heaters (HPWHs) in the spotlight as an energy-efficient alternative to traditional water heating systems. However, their widespread adoption is limited by challenges such as insufficient First Hour Rating (FHR), suboptimal control mechanisms, and limited flexibility for demand response operations. Here, to address these limitations, this study proposes an innovative HPWH system integrated with embedded phase change material (PCM)-based thermal energy storage (TES). The research introduces a novel design and control strategy that leverages optimized PCM integration to enhance thermal storage capacity, improve hot water delivery during peak demand, and increase load-shifting potential. A combination of system modeling, performance simulation, and demand response control strategy evaluation was employed to quantify the benefits of PCM integration. Results demonstrate that the proposed PCM-TES HPWH system significantly enhances FHR, with an optimal 7.0 lb. of PCM increasing FHR by over 26 %—from 62 to 78 gal—for a standard 50-gal HPWH. Additionally, under advanced demand response operation using a preheat strategy, the system reduces the percentage of control temperature out-of-band time from 65 % (conventional HPWH) to just 11.6 %, enabling a more stable and efficient hot water supply. This research contributes a novel PCM-embedded HPWH design and control framework that addresses both performance and grid-interactivity challenges. The findings offer a viable pathway to enhancing the operational efficiency, flexibility, and grid responsiveness of residential water heating systems.

Demand response control↗
DOE OSTI2022

Synthetic aromatic kerosene property prediction improvements with isomer specific characterization via GCxGC and vacuum ultraviolet spectroscopy

This research explores an advanced method of fuel composition determination and builds upon typical hydrocarbon group type analyses performed with two-dimensional gas chromatography (GCxGC). In this study, structural information of individual species within Virent’s Synthetic Aromatic Kerosene (SAK) is identified by vacuum ultraviolet (VUV) spectroscopy. By mass, 71.3% of the components elute within six peaks of the chromatogram, from which 12 unique species are identified through a novel deconvolution method. Overall, the identification of 93.6%m across 26 structural isomers is made by the methods described in this work. With 93.6%m ascribed to specific isomers, the precision of fuel property predictions improves dramatically. For example, the absolute error of the viscosity prediction is reduced by 90% because of this advancement in diagnostic capability, and its 95-percentile confidence interval (precision only) is reduced by 93%. Additionally, the properties of SAK, blended with hydro processed esters fatty acids (HEFA), are demonstrated to have blended properties consistent with conventional jet fuel.

10 SYNTHETIC FUELS↗
DOE OSTI2024

Produced water sharing: Improved economics and reduced community impact – A Pennsylvania case study

Here, hydraulic fracturing for oil and gas extraction from unconventional reservoirs is water intensive. Between water sourced for fracturing purposes and water present in rock formations, operators often produce a greater volume of water than oil or gas. Historically, this surplus of produced water has mainly been disposed of via deep injection wells. Rising disposal costs, seasonally limited water availability, and concerns over induced seismicity have incentivized produced water recycling practices, where an operator uses produced water for hydraulic fracturing operations. The logistical challenges associated with produced water recycling have also encouraged operators to adopt ad-hoc water exchange practices, in which competing operators will exchange produced water for mutual cost savings. In this paper, we investigate the potential benefit from systematic produced water exchange among operators in Northeastern Pennsylvania. We leverage PARETO, a free and open-source modeling framework for produced water management optimization, to quantify the benefits of water exchange practices. In an example drawn from FracFocus data, we find that the adoption of systematic water sharing could improve produced water recycling rates from 49.2% to 99%, decreasing operating and trucking costs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Use of tritium-rich fuel to improve the yield of layered deuterium/tritium inertial fusion capsules

In deuterium–tritium (DT) ice layered implosions, nearly all hot spot mass at peak burn comes from the dense fuel. Accurate prediction of the fuel mass ablation, including the enthalpy associated with mass inflow into the hot spot from the dense fuel, is essential to understanding the energetics and ignition of the hot spot in layered implosions. A recently published boundary layer analysis (Daughton et al., 2023) indicates a faster mass ablation rate than in previous analyses of layered implosions. Inclusion of this effect provides a better match to simulations and leads to a new ignition threshold where the temperature of the dense fuel plays a critical role. This analysis motivates possible new directions for improved capsule performance. Here, the authors present evidence in support of one such approach: the use of tritium-rich ice to decrease 14 MeV neutron scattering and heating of the dense fuel, resulting in less mass ablation and more robust burn of the hot spot. It is found from numerical simulations that despite a less favorable D:T ratio in the ice, the use of a 40:60 D:T ratio leads to an increase in capsule yield of 17% percent compared with that of a 50:50 D:T ratio fuel for capsules resembling those of the recent N210808 ignition experiment on the NIF (Abu-Shawareb et al., 2022) and an increase of 74% compared with that of a 60:40 D:T ratio fuel capsule. Finally, these results are potentially important for modeling all layered implosions, since some degree of DT fractionization may arise naturally during the beta layering process. In addition, this physics is important for the feasibility of high-gain capsule designs that seek to minimize tritium usage, as in some inertial fusion energy concepts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Improved adhesion of polyurethane-based nanocomposite coatings to tin surface through silane coupling agents

Conformal coatings with higher adhesion strength is critical for mitigating the growth of whiskers from the pure tin (Sn) or Sn-rich surfaces of the Pb-free electronics. Silane coupling agents have the ability to form a durable bond between polymeric coatings and metallic materials. The main goal of this paper is to investigate the effect of silane agents on the adhesion behavior of polyurethane (PU), polyurethane acrylate (PUA) and both coatings filled with silicone rubber (SR) nanoparticles on the tin solder pads. It was found that an isocyanate-based silane provided excellent adhesion for PU and PU + SR coatings and an acrylic-based silane for PUA and PUA + SR coatings on the tin surface. This was due to the reaction bond formation between the silane coupling agent and the coating. Hence, the selection of silane coupling agents with the organofunctional group similar to the coating material is crucial to improve the adhesion properties of the coating.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Joint impedance and facies inversion of time-lapse seismic data for improving monitoring of CO 2 incidentally stored from CO 2 EOR

Time-lapse seismic monitoring is an effective and proven technology for mapping the distribution of CO 2 in a subsurface reservoir. When injected CO 2 displaces other reservoir fluids, porous-medium properties are changed and thus the seismic impedance changes, causing time-lapse seismic amplitude differences in the injection zones. The analysis and interpretation of images created from these amplitude differences can provide information about reservoir architecture and the CO 2 migration within the reservoir. Incorporating seismic inversion and rock physics into the interpretation of time-lapse seismic data can considerably improve the modeling and monitoring to detect and assess the location of CO 2 over time. The joint inversion method presented in this paper has an integral representation of the geology in the inversion algorithm using elastic facies, which provides information about the spatial distribution of the geologic heterogeneities controlling the movement of fluids in the reservoir. The method was successfully applied to time-lapse seismic data from a mature oil field undergoing CO 2 enhanced oil recovery. The estimated seismic acoustic impedances and facies reflect the characteristics of individual geologic facies and fluid conditions of the reservoir subject to CO 2 injection. Finally, the probabilities estimated by the joint impedance and facies inversion for the reservoir's litho-fluid facies can be used for forecasting CO 2 saturation and pressure changes within the target reservoir.

4D seismic↗
DOE OSTI2021

Data requirements for improving the Quantitative Risk Assessment of liquid hydrogen storage systems

Quantitative Risk Assessment (QRA) supports the development of risk-informed safety codes and standards which are employed to enable the safe deployment of hydrogen technologies essential to decarbonize the transportation sector. System reliability data is a necessary input for rigorous QRA. Here, the lack of reliability data for bulk liquid hydrogen (LH 2 ) storage systems located on site at fueling stations limits the use of QRAs. In turn, this hinders the ability to develop the necessary safety codes and standards that enable worldwide deployment of these stations. Through a QRA-based analysis of a LH 2 storage system, this work focuses on identifying relevant scenario and probability data currently available and ascertaining future data collection requirements regarding risks specific to liquid hydrogen releases. The work developed consists of the analysis of a general bulk LH 2 storage system design located at a hydrogen fueling station. Failure Mode and Effect Analysis (FMEA) and traditional QRA modeling tools such as Event Sequence Diagrams (ESD) and Fault Tree Analysis (FTA) are employed to identify, rank, and model risk scenarios related to the release of LH 2 . Based on this analysis, scenario and reliability data needs to add LH 2 -related components to QRA are identified with the purpose of improving the future safety and risk assessment of these systems.

08 HYDROGEN↗