Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heating systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

The Earth Observing System AM Spacecraft - Thermal Control Subsystem

Mission requirements for the EOS-AM Spacecraft intended to monitor global changes of the entire earth system are considered. The spacecraft is based on an instrument set containing the Advanced Spaceborne Thermal Emission and Reflection radiometer (ASTER), Clouds and Earth's Radiant Energy System (CERES), Multiangle Imaging Spectro-Radiometer (MISR), Moderate-Resolution Imaging Spectrometer (MODIS), and Measurements of Pollution in the Troposphere (MOPITT). Emphasis is placed on the design, analysis, development, and verification plans for the unique EOS-AM Thermal Control Subsystem (TCS) aimed at providing the required environments for all the onboard equipment in a densely packed layout. The TCS design maximizes the use of proven thermal design techniques and materials, in conjunction with a capillary pumped two-phase heat transport system for instrument thermal control.

Chalmers, D.↗

Brayton Power Conversion System Study to Advance Technology Readiness for Nuclear Electric Propulsion

Recently, there has been significant interest within the aerospace community to develop space based nuclear power conversion technologies especially for exploring the outer planets of our solar system where the solar energy density is very low. To investigate these technologies NASA awarded several contracts under Project Prometheus, the Nuclear Systems Program. The studies described in this paper were performed under one of those contracts, which was to investigate the use of a nuclear power conversion system based on the closed Brayton cycle (CBC).The investigation performed included BPCS (Brayton Power Conversion System) trade studies to minimize system weight and radiator area and advance the state of the art of BPCS technology. The primary requirements for studies were a power level of 100 kWe (to the PPU), a low overall power system mass and a lifetime of 15 years (10 years full power). For the radiation environment, the system was to be capable of operation in the generic space environment and withstand the extreme environments surrounding Jupiter. The studies defined a BPCS design traceable to NEP (Nuclear Electric Propulsion) requirements and suitable for future missions with a sound technology plan for technology readiness level (TRL) advancement identified. The studies assumed a turbine inlet temperature approx. 100 C above the current the state of the art capabilities with materials issues and related development tasks identified. Analyses and evaluations of six different HRS (heat rejection system) designs and three primary power management and distribution (PMAD) configurations will be discussed in the paper.

Patrick E. Frye↗

Measuring Titanium Heat Pipe Thermal Conductivity for CO2 Adsorption Systems

Current models of the Air-Cooled Temperature Swing Adsorption Compressor (AC-TSAC) being developed for long duration space exploration utilize cooling chambers and heat plates to adsorb and desorb contaminants -13 . To reduce resources required and lower the equivalent system mass (ESM), the study focuses on determining the applications of titanium heat pipe systems to operate both phases, allowing for future research into the development of a heat pipe chamber to hold the zeolite formulations.

multifunctional sorbent↗

User's manual for the ALS base heating prediction code, volume 2

The Advanced Launch System (ALS) Base Heating Prediction Code is based on a generalization of first principles in the prediction of plume induced base convective heating and plume radiation. It should be considered to be an approximate method for evaluating trends as a function of configuration variables because the processes being modeled are too complex to allow an accurate generalization. The convective methodology is based upon generalizing trends from four nozzle configurations, so an extension to use the code with strap-on boosters, multiple nozzle sizes, and variations in the propellants and chamber pressure histories cannot be precisely treated. The plume radiation is more amenable to precise computer prediction, but simplified assumptions are required to model the various aspects of the candidate configurations. Perhaps the most difficult area to characterize is the variation of radiation with altitude. The theory in the radiation predictions is described in more detail. This report is intended to familiarize a user with the interface operation and options, to summarize the limitations and restrictions of the code, and to provide information to assist in installing the code.

Reardon, John E.↗

The Spatial Distribution of Fluorescent H2 Emission Near T Tauri

New subarcsecond far-UV observations of T Tau with Hubble Space Telescope STIS show spatially resolved structure in the 2in. x 2in. area around the star. The structures are apparent in multiline emission of fluorescent H2 pumped by Ly(alpha). One emission structure follows the cavity walls observed around T Tau N in scattered light in the optical. A temperature of greater than or = l000 K is required to have a high enough population in the H2 to produce the observed fluorescent lines; in the cool environment of the T Tau system, shock heating is required to achieve this temperature at distances of a few tens of AU. Fluorescent H2 along the cavity wall represent the best evidence to date for the action of low-density, wide opening angle outflows driving cavities into the molecular medium at scales less than or = 100 AU. A southern region of emission consists of two arcs, with shape and orientation similar to the arcs of H2 2.12 microns and forbidden-line emission crossing the outflow associated with the embedded system T Tau S. This region is located near the centroid of forbidden-line emission at the blueshifted lobe of the north-south outflow.

Saucedo, Jose↗

Organic/Inorganic Polymeric Composites for Heat-Transfer Reduction

Organic/inorganic polymeric composite materials have been invented with significant reduction in heat-transfer properties. Measured decreases of 20-50 percent in thermal conductivity versus that of the unmodified polymer matrix have been attained. These novel composite materials also maintain mechanical properties of the unmodified polymer matrix. The present embodiments are applicable, but not limited to: racing applications, aerospace applications, textile industry, electronic applications, military hardware improvements, and even food service industries. One specific application of the polymeric composition is for use in tanks, pipes, valves, structural supports, and components for hot or cold fluid process systems where heat flow through materials is problematic and not desired. With respect to thermal conductivity and physical properties, these materials are superior alternatives to prior composite materials. These materials may prove useful as substitutes for metals in some cryogenic applications. A material of this type can be made from a blend of thermoplastics, elastomers, and appropriate additives and processed on normal polymer processing equipment. The resulting processed organic/inorganic composite can be made into fibers, molded, or otherwise processed into useable articles.

Smith, Trent↗

Acoustic containerless experiment system: A non-contact surface tension measurement

The Acoustic Containerless Experiment System (ACES) was flown on STS 41-B in February 1984 and was scheduled to be reflown in 1986. The primary experiment that was to be conducted with the ACES module was the containerless melting and processing of a fluoride glass sample. A second experiment that was to be conducted was the verification of a non-contact surface tension measurement technique using the molten glass sample. The ACES module consisted of a three-axis acoustic positioning module that was inside an electric furnace capable of heating the system above the melting temperature of the sample. The acoustic module is able to hold the sample with acoustic forces in the center of the chamber and, in addition, has the capability of applying a modulating force on the sample along one axis of the chamber so that the molten sample or liquid drop could be driven into one of its normal oscillation modes. The acoustic module could also be adjusted so that it could place a torque on the molten drop and cause the drop to rotate. In the ACES, a modulating frequency was applied to the drop and swept through a range of frequencies that would include the n = 2 mode. A maximum amplitude of the drop oscillation would indicate when resonance was reached and from that data the surface tension could be calculated. For large viscosity samples, a second technique for measuring surface tension was developed. The results of the ACES experiment and some of the problems encountered during the actual flight of the experiment will be discussed.

Elleman, D. D.↗

Experimental evaluation of a breadboard heat and product-water removal system for a space-power fuel cell designed with static water removal and evaporative cooling

A test program was conducted to evaluate the design of a heat and product-water removal system to be used with fuel cell having static water removal and evaporative cooling. The program, which was conducted on a breadboard version of the system, provided a general assessment of the design in terms of operational integrity and transient stability. This assessment showed that, on the whole, the concept appears to be inherently sound but that in refining this design, several facets will require additional study. These involve interactions between pressure regulators in the pumping loop that occur when they are not correctly matched and the question of whether an ejector is necessary in the system.

Hagedorn, N. H.↗

Steady and transient least square solvers for thermal problems

This paper develops a hierarchical least square solution algorithm for highly nonlinear heat transfer problems. The methodology's capability is such that both steady and transient implicit formulations can be handled. This includes problems arising from highly nonlinear heat transfer systems modeled by either finite-element or finite-difference schemes. The overall procedure developed enables localized updating, iteration, and convergence checking as well as constraint application. The localized updating can be performed at a variety of hierarchical levels, i.e., degree of freedom, substructural, material-nonlinear groups, and/or boundary groups. The choice of such partitions can be made via energy partitioning or nonlinearity levels as well as by user selection. Overall, this leads to extremely robust computational characteristics. To demonstrate the methodology, problems are drawn from nonlinear heat conduction. These are used to quantify the robust capabilities of the hierarchical least square scheme.

Padovan, Joe↗

Development and Characterization of CPI Surface Insulation

A new type of reusable surface material that could find application as a component of the thermal protection system of the space shuttle orbiter is discussed. These materials consist of 20-30% dense closed cell high emittance glass ceramic foams formulated by sintering an intimate mixture of fly ash cenospheres with 4-12 wt % cobalt oxide. These unique ceramic foams exhibit: (1) High mechanical strengths; (2) no need for waterproof coating due to the non-interconnecting cell network; (3) high emissivities; (4) ability to withstand space shuttle thermal environments with no loss of reuse capability; and (5) a machinable ceramic with capability of maintaining the close tolerances required of an integrated heat shield system.

Tobin, A.↗

Natural circulation decay heat removal from an SP-100, 550 kWe power system for a lunar outpost

This research investigated the decay heat removal from the SP-100 reactor core of a 550-kWe power system for a lunar outpost by natural circulation of lithium coolant. A transient model that simulates the decay heat removal loop (DHRL) of the power system was developed and used to assess the system's decay heat removal capability. The effects of the surface area of the decay heat rejection radiator, the dimensions of the decay heat exchanger (DHE) flow duct, the elevation of the DHE, and the diameter of the rise and down pipes in the DHRL on the decay heat removal capability were examined. Also, to determine the applicability of test results at earth gravity to actual system performance on the lunar surface, the effect of the gravity constant (1 g and 1/6 g) on the thermal behavior of the system after shutdown was investigated.

El-Genk, Mohamed S.↗

Stability of the Early Mars Atmosphere to Collapse into Permanent Polarcaps

The presence of a permanent CO2 polar ice cap on Mars has important consequences for the planet's climate system. The heat balance of such a cap, which is determined mainly by atmospheric heat transport, and the downward solar in infrared radiative fluxes, determines its surface temperature, which through the vapor pressure relation sets the mean annual surface pressure. On Mars today, for example, the south residual CO2 cap is present year-round with a mean annual temperature of approximately 145 K which corresponds to a mean annual CO2 vapor pressure of approximately 600 Pa. On early Mars, permanent polar caps are also possible especially since the sun was less luminous 3.5-4.0 Gya. Thus, the existence of permanent polar caps on early Mars is central to understanding the nature of the planets climate system in those ancient times and whether or not the atmosphere might have been capable of sustaining conditions suitable for liquid water flowing over the surface as is indicated in the geological record. Forget et al [1] showed that for present orbital properties atmospheric collapse into permanent polar caps could only be prevented for surface pressures roughly between 500 - 3000 hPa. Though follow-on studies confirm and extend the Forget et al. results [2], the full sensitivity of this "window" of stability has not been explored. There are many factors to consider such the albedo of the caps, dust content of the atmosphere, and the presence of water ice clouds. However, we begin our exploration of the stability of the early Martian atmosphere by focusing on the role of CO2 ice clouds. In some preliminary simulations with the Ames Mars General Circulation Model (GCM) we found that atmospheric collapse depends on assumptions regarding the fate of CO2 ice clouds. If, for example, we assume the clouds immediately fall to the surface, then in some cases collapse is favored. On the other hand if the clouds are allowed to fall and evaporate, collapse can be averted. This implies that CO2 ice cloud microphysics is important to the overall stability of the atmosphere. Though the Ames GCM has a sophisticated CO2 cloud microphysics package that includes nucleation, growth, and sedimentation (see accompanying poster by Kahre et al. [3]), we have implemented a simpler scheme based on the Forget et al. [1] approach to CO2 ice clouds. Our goal is to reproduce and expand their study. The key parameter in this approach is the concentration and vertical distribution of cloud condensation nuclei (CCN), i.e., dust particles. Fewer CCN lead to larger particles which fall faster, while higher CCN concentrations lead to smaller particles and thicker clouds that remain suspended for longer periods of time. We plan to explore the stability of the atmosphere to CCN concentrations and distributions and then assess the capability of thick early atmospheres to loft and distribute dust particles (CCN) around the planet. Thus, our work will shed light on the nature of the coupling between the dust and CO2 cycles and the implications it has for the early Mars climate system.

ice cap↗

Absorption heat pump for space applications

In the first part, the performance of the Absorption Heat Pump (AHP) with water-sulfuric acid and water-magnesium chloride as two new refrigerant-absorbent fluid pairs was investigated. A model was proposed for the analysis of the new working pairs in a heat pump system, subject to different temperature lifts. Computer codes were developed to calculate the Coefficient of Performance (COP) of the system with the thermodynamic properties of the working fluids obtained from the literature. The study shows the potential of water-sulfuric acid as a satisfactory replacement for water-lithium bromide in the targeted temperature range. The performance of the AHP using water-magnesium chloride as refrigerant-absorbent pair does not compare well with those obtained using water-lithium bromide. The second part concentrated on the design and testing of a simple ElectroHydrodynamic (EHD) Pump. A theoretical design model based on continuum electromechanics was analyzed to predict the performance characteristics of the EHD pump to circulate the fluid in the absorption heat pump. A numerical method of solving the governing equations was established to predict the velocity profile, pressure - flow rate relationship and efficiency of the pump. The predicted operational characteristics of the EHD pump is comparable to that of turbomachinery hardware; however, the overall efficiency of the electromagnetic pump is much lower. An experimental investigation to verify the numerical results was conducted. The pressure - flow rate performance characteristics and overall efficiency of the pump obtained experimentally agree well with the theoretical model.

Nguyen, Tuan↗

Abiotic formation of hydrocarbons and oxygenated compounds during thermal decomposition of iron oxalate

The formation of organic compounds during the decomposition of iron oxalate dihydrate (IOD) was investigated as a possible analog for abiotic organic synthesis in geological systems. After heating at 330 degrees C for 2-4 days, IOD decomposed to a mixture of the minerals siderite and magnetite plus gas and non-volatile organic compounds. The organic products included an extremely large variety of compounds, making identification of individual reaction products difficult. However, the non-volatile products were dominated by several homologous series of alkylated cyclic compounds mostly containing a single aromatic ring, including alkylphenols, alkylbenzenes, alkyltetrahydronaphthols, and alkyltetrahydronaphthalenes. Traces of n-alkanols, n-alkanoic acids, n-alkanones, and n-alkanes were also identified. Carbon in the gas phase was predominantly CO2 (+CO?), with lesser amounts of light hydrocarbons to > C6 including all possible branched and normal isomers of the alkanes and alkenes. The organic products were apparently the result of two concurrent reaction processes: (1) condensation of the two-carbon units present in the initial oxalate moiety, and (2) Fischer-Tropsch-type synthesis from CO2 or CO generated during the experiment. Compounds produced by the former process may not be characteristic of synthesis from the single-carbon precursors which predominate in geologic systems, suggesting iron oxalate decomposition may not provide a particularly suitable analog for investigation of abiotic organic synthesis. When water was included in the reaction vessels, CO2 and traces of methane and light hydrocarbon gases were the only carbon products observed (other than siderite), suggesting that the presence of water allowed the system to proceed rapidly towards equilibrium and precluded the formation of metastable organic intermediates.

Non-NASA Center↗

Liquid droplet radiator thermal characteristics

The effects of droplet size, emissivity, and spacing on the liquid droplet radiator (LDR) performance space heat rejection system are investigated. The procedures for predicting surface emissivity of semitransparent droplets as a function of absorptivity and radius are examined. The relation between absorptivity, reflectivity, transmissivity, and emissivity is studied. It is observed that for droplets in the 25-200 micron range the radius affects emissivity. The thermal performance of an array of droplet streams is described using a thermal radiation model. Droplet temperatures are calculated; it is shown that outside droplet streams are more effective than interior droplets for arrays in the range of radius to spacing ratio from 0.05-0.2. Temperature distributions as a function of droplet size, emissivity, and velocity are presented. The heat transfer performance of a LDR is evaluated in terms of fin effectiveness. The equivalent sheet emissivities of droplet streams are examined.

Edgerton, R. H.↗

Dual Heat Pulse, Dual Layer Thermal Protection System Sizing Analysis and Trade Studies for Human Mars Entry Descent and Landing

NASA has been recently updating design reference missions for the human exploration of Mars and evaluating the technology investments required to do so. The first of these started in January 2007 and developed the Mars Design Reference Architecture 5.0 (DRA5). As part of DRA5, Thermal Protection System (TPS) sizing analysis was performed on a mid L/D rigid aeroshell undergoing a dual heat pulse (aerocapture and atmospheric entry) trajectory. The DRA5 TPS subteam determined that using traditional monolithic ablator systems would be mass expensive. They proposed a new dual-layer TPS concept utilizing an ablator atop a low thermal conductivity insulative substrate to address the issue. Using existing thermal response models for an ablator and insulative tile, preliminary hand analysis of the dual layer concept at a few key heating points indicated that the concept showed potential to reduce TPS masses and warranted further study. In FY09, the followon Entry, Descent and Landing Systems Analysis (EDL-SA) project continued by focusing on Exploration-class cargo or crewed missions requiring 10 to 50 metric tons of landed payload. The TPS subteam advanced the preliminary dual-layer TPS analysis by developing a new process and updated TPS sizing code to rapidly evaluate mass-optimized, full body sizing for a dual layer TPS that is capable of dual heat pulse performance. This paper describes the process and presents the results of the EDL-SA FY09 dual-layer TPS analyses on the rigid mid L/D aeroshell. Additionally, several trade studies were conducted with the sizing code to evaluate the impact of various design factors, assumptions and margins.

McGuire, Mary Kathleen↗

Fibrous-Ceramic/Aerogel Composite Insulating Tiles

Fibrous-ceramic/aerogel composite tiles have been invented to afford combinations of thermal-insulation and mechanical properties superior to those attainable by making tiles of fibrous ceramics alone or aerogels alone. These lightweight tiles can be tailored to a variety of applications that range from insulating cryogenic tanks to protecting spacecraft against re-entry heating. The advantages and disadvantages of fibrous ceramics and aerogels can be summarized as follows: Tiles made of ceramic fibers are known for mechanical strength, toughness, and machinability. Fibrous ceramic tiles are highly effective as thermal insulators in a vacuum. However, undesirably, the porosity of these materials makes them permeable by gases, so that in the presence of air or other gases, convection and gas-phase conduction contribute to the effective thermal conductivity of the tiles. Other disadvantages of the porosity and permeability of fibrous ceramic tiles arise because gases (e.g., water vapor or cryogenic gases) can condense in pores. This condensation contributes to weight, and in the case of cryogenic systems, the heat of condensation undesirably adds to the heat flowing to the objects that one seeks to keep cold. Moreover, there is a risk of explosion associated with vaporization of previously condensed gas upon reheating. Aerogels offer low permeability, low density, and low thermal conductivity, but are mechanically fragile. The basic idea of the present invention is to exploit the best features of fibrous ceramic tiles and aerogels. In a composite tile according to the invention, the fibrous ceramic serves as a matrix that mechanically supports the aerogel, while the aerogel serves as a low-conductivity, low-permeability filling that closes what would otherwise be the open pores of the fibrous ceramic. Because the aerogel eliminates or at least suppresses permeation by gas, gas-phase conduction, and convection, the thermal conductivity of such a composite even at normal atmospheric pressure is not much greater than that of the fibrous ceramic alone in a vacuum.

White, Susan M.↗

Analytic investigation of the AEM-A/HCMM attitude control system performance

The Heat Capacity Mapping Mission (HCMM), scheduled for launch in 1978, will be three-axis stabilized relative to the earth in a 600-kilometer altitude, polar orbit. The autonomous attitude control system consists of three torquing coils and a momentum wheel driven in response to error signals computed from data received from an infrared horizon sensor and a magnetometer. This paper presents a simple model of the attitude dynamics and derives the equations that determine the stability of the system during both attitude acquisition (acquisition-mode) and mission operations (mission-mode). Modifications to the proposed mission-mode control laws which speed the system's response to transient attitude errors and reduce the steady-state attitude errors are suggested. Numerical simulations are performed to validate the results obtained with the simple model.

Lerner, G. M.↗