Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fuel elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Integrated TBC/EBC for SiC Fiber Reinforced SiC Matrix Composites for Next Generation Gas Turbines (Final Report)

In this ambitious project, a significant challenge preventing widespread use of ceramic matrix composites in hot section components of gas power generating turbines was addressed. Hot section components made from SiC fiber reinforced SiC matrix composites (SiC/SiC composites), have the potential to achieve a combined cycle energy efficiency of above 65%. To achieve this efficiency, the temperature of the combustion gases on the turbine component surface is expected to reach as high as ~1700ºC (3100ºF). However, SiC/SiC composites suffer from volatilization at high temperature under high velocity steam environment – typical in a turbine hot chamber. This integrated collaborative project, between two research groups at Clemson University and a team of engineers and scientists at GE Gas Power, focused on design, fabrication and evaluation of a new graded environmental barrier coating. Using the excellent compositional tailorability of polymer derived ceramics (PDCs), we developed an integrated EBC/BC that smoothly transitions from bottom SiC/SiC bond interface to hermetic sesquioxide (Y 2 O 3 ) top surface. This smooth compositional transition avoided the sharp CTE mismatch at interfaces to greatly reduce the thermal stress. The developed EBC is compatible with and bonds well with the bond coat that GE uses. The top hermetic oxide surface ensures low oxygen transportation and volatilization rates under the high velocity steam environment. The graded microstructure with increasing sesquioxide concentration also decreases the amount of Si and C elements near the top hermetic sesquioxide layer. Coatings made using a process suitable for manufacturing – atmospheric plasma spraying was demonstrated. The microstructure of coatings made using this process were fully characterized. Finally, the performance of these coatings was investigated under the most demanding conditions for this application. Specifically, high temperature, high velocity steam exposure; thermal shock test; and thermal cycling tests. The graded coatings performed exceptionally well in all these tests. Specific suggestions for future development in this area have also been identified. In addition to the excellent technical progress, this project helped initiate a robust collaboration between the research groups at Clemson and GE Gas Power. It also provided a high-quality learning and mentoring opportunity for the three post-doctoral research associates and two UG students at Clemson University who worked on this project. All proposed tasks, sub-tasks were completed, and all milestones achieved.

03 NATURAL GAS↗
DOE OSTI2025

MOOSE ProbML: Parallelizable Probabilistic Machine Learning and Uncertainty Quantification Capabilities

The Multiphysics Object Oriented Simulation Environment (MOOSE) is a widely used open- source finite element software for performing multiphysics multiscale simulations in a massively parallel fashion. Recently, the computational team at Idaho National Laboratory (INL) has implemented Probabilistic Machine Learning (ProbML) capabilities in MOOSE—in a parallelized fashion—and enable active learning with large-scale computational models for tasks such as surrogate model development, scale bridging, forward/inverse uncertainty quantification (UQ), Bayesian optimization, etc. This presentation summarizes these developments in MOOSE along with demonstrations on several real applications relevant to nuclear energy. At the fundamental level, samplers like Monte Carlo/Latin Hypercube, variance reduction, parallelized Markov Chain Monte Carlo (MCMC) support uncertainty propagation in both forward and inverse settings. These samplers can be integrated with the Gaussian processes (GP) suite in MOOSE, which offer several variants like scalar GPs, multi-output GPs, and deep GPs, to enable active learning. These GPs can be tuned using gradient-based optimization methods like Adam and its variants or gradient-free methods like the elliptical slice sampler (a variant of MCMC adept under Gaussian settings) for more complex covariance kernels or likelihoods whose gradient computations can be cumbersome. A variety of batch acquisition functions permit parallelized evaluation of the computational model and support different learning objectives with high efficiency like Bayesian inference, global surrogate development, optimization, etc. Furthermore, libtorch integration supports training, evaluation, and re-training of neural networks and other complex machine learning models in active learning settings. The impacts of these developments are shown on several real applications: (1) nuclear fuel inverse UQ and model inadequacy assessment using the Kennedy O’Hagan framework; (2) uncertainty aware surrogate modeling for additive manufacturing to predict field quantities; (3) nuclear reactor rare events analysis; and (4) complex fluid flow prediction using a global surrogate with quantified prediction uncertainty. Finally, the outlook of MOOSE ProbML is discussed for both outer-loop and inner-loop computations in the broad view to accelerate fuels and materials qualification, address gaps in knowledge and data, and assess new reactor/fuel systems.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Green Needle Coke Production from Pyrolysis Biocrude toward Bio-based Anode Material Manufacture: Biochar Fines Addition Effect as “Physical Template” on the Crystalline Order

Here, a new method for producing green needle coke (GNC) is developed by replacing the “heavy fraction” of petroleum pitch delayed coking with fast pyrolysis biocrude. A series of alternative biocrude distillation, carbonization, and calcination conditions were investigated to determine the influence of these processing parameters onto the crystalline structure of the resulting graphitized material. For the first time, the addition of biochar fines was found to serve as a “physical template” to increase the graphitic nature of the final product. During the initial biocrude carbonization (350–450 °C), volatile compounds are released, and aromatics in pyrolysis biocrude experience condensation, resulting in GNC solids with carbon contents above 95 wt % and some early lamellar structure. In the second stage of the thermal process (25–1500 °C), there are additional thermal decomposition reactions with an increase in the aromatic nature of the graphitized solid. It was found that systematic addition of biochar fines induces a nucleating effect during the GNC development. Thermogravimetric analysis suggests that biochar fines promote polycondensation reactions by modifying the biopitch structure and molecular weight, while elemental analysis (CHN) shows a reduction in both H/C and O/C ratios which are consistent with the increase in aromaticity and removal of oxygenated compounds as thermal treatment evolves. The effects of different bio-based pitch materials (after distillation) and GNC intermediates were evaluated by pyrolysis-gas chromatography mass spectrometry and Fourier transform infrared, displaying slight changes on product yields and quality. X-ray diffraction patterns taken after graphitization evidence an increase in the graphitic order with the addition of biochar fines. Transmittance electron microscopy depicts an improvement on graphitic morphology as biochar fine content increases. The use of biochar fines showed a significant increase in graphitic ordering at addition levels above 0.01 wt %. These results show that thermally treated biocrude/biochar fine systems can produce graphitic structures (hard carbon-like) that might be suitable for the manufacture of sodium-ion batteries.

09 BIOMASS FUELS↗
DOE OSTI2025

ZnTiN 2 as an Electron-Selective, Protective Layer on Si Photocathodes

Photoelectrochemical production of fuels requires photoelectrodes that efficiently convert sunlight to electrochemical energy by producing photovoltage and photocurrent and maintain this ability over time under a variety of pH, illumination, and applied bias conditions. Work in the photovoltaic community has demonstrated that interfaces with high charge carrier selectivity provide high photovoltages. This offers a co-design opportunity to create semiconductor photoelectrodes with contact layers that are both carrier-selective and offer protection from degradation in aqueous solutions. In this work, we explored the ternary nitride ZnTiN 2 as an electronselective, protective layer for Si-based photocathodes. We demonstrated that ZnTiN 2 formed a heterojunction with p-type Si that facilitated electron movement toward the ZnTiN 2 surface for light-driven reduction reactions. Across a variety of electrolyte conditions, ZnTiN 2 /Si produced an open circuit voltage of ca. 400 mV vs the solution potential, while bare Si produced 220−480 mV vs the solution potential depending on conditions. ZnTiN 2 was also shown to protect Si over 72 h at open circuit in the dark in 0.1 M KHCO 3 aqueous solution at pH 10.5, with a 2.4% loss in open circuit voltage compared to a 17% loss for unprotected Si. A protective effect was also observed under illumination during methyl viologen reduction at pH 3.5 for 21 h, with a 2.5% loss in open circuit voltage observed for ZnTiN 2 /Si compared to a 25% loss in open circuit voltage for unprotected Si under the same conditions. Elemental characterization revealed the presence of oxides on the surface of ZnTiN 2 that are consistent with the Pourbaix diagram after photoelectrochemical operation; these oxides appeared to support durability without hindering charge carrier extraction to drive electrochemical work. This work highlights the promise of ZnTiN 2 for durable photoelectrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bipolar Membranes with an Electrospun 3D Junction

Freestanding bipolar membranes (BPMs) with an entirely new and transformative morphology were fabricated and characterized. The key disruptive design element was a water-splitting/water-generation junction layer of finite thickness composed of interwoven and interlocking electrospun anion-exchange polymer (AEP) fibers and cation-exchange polymer (CEP) fibers. Methods were developed to sandwich the 3D junction layer between two pre-formed dense AEP and CEP films., with the closure of all interfiber voids, where the processing steps are easily incorporated into a commercial roll-to-roll membrane manufacturing scheme. A series of membranes were made using different polymers and junction layers to identify the optimum morphology and composition for water-splitting and water-generation applications. For water splitting, the 3D junction BPMs worked remarkably well with operating current densities at/above 1.0 A/cm2 (10X greater than commercial BPMs) at a transmembrane voltage drop of only 1.1 V. In water generation mode, the 3D junction BPMs operated at 0.5 A/cm2, a world-record current density. The membranes were found to exhibit outstanding durability and can be manufactured at scale for low cost. The high operating current densities and stable long-term operation are due to the 3D junction layer design, where there is a high interfacial area for water splitting or water generation reactions and where the interlocking fibers prevent delamination of the outer films. These new BPMs are ideal candidate materials for both existing water-splitting electrodialysis separations and new electrochemical processes, such as large-scale direct air capture of CO 2 , reactors for CO 2 reduction, self-hydrating fuel cells, and redox flow batteries.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

A High-Performance Discrete-Element Framework for Simulating Flow and Jamming of Moisture Bearing Biomass Feedstocks

We developed and verified a high-performance open-source discrete element method (DEM) solver with simultaneously-supported feedstock-specific interaction models, including bonded-sphere, liquid bridge, cohesion, and non-linear contact models. Our solver uses parallel data structures on hybrid central and graphics processing unit (CPU/GPU) architectures, with favorable strong scaling performance observed for large problem sizes comprised of (100 M particles), and 4X single-node GPU speedup. The particles for corn stover feedstock were conceptualized and calibrated based on experimental measurements and results. Sensitivity analyses demonstrate that the mass flow rate from a wedge hopper is governed primarily by moisture content, friction coefficient, and cohesion energy density. The model is used to reproduce experimentally observed hopper jamming results, highlighting that the experimental no-flow trends can only be achieved by using non-spherical particles, liquid bridge and cohesion models, highlighting the importance of using concurrent feedstock specialized models for the effective representation of biomass material handling problems.

bioenergy↗
DOE OSTI2024

EchemFEM: A Firedrake-based Python package for electrochemical transport

The transition from fossil fuels to renewable energy has brought about a rapid increase in the availability of clean electricity. However, electricity generated from sources such as wind and solar are limited to intermittent operation due to daily and seasonal variation. One solution is to utilize electrochemical devices in energy storage and electrochemical manufacturing applications, where they can harness surplus energy and decarbonize chemical industries traditionally reliant on petrochemical feedstocks. Managing the growing prevalence of renewable energy underscores the importance of developing and scaling up these technologies, which can in turn facilitate the achievement of carbon emission reduction commitments of companies and developed economies. Likewise, the electrification of transport creates an increasing need for energy-dense electrochemical energy storage devices such as batteries and supercapacitors. Naturally, simulation tools are required to assist in the design of efficient and industrial-scale electrochemical devices.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

CFD-DEM Modeling of Autothermal Pyrolysis of Corn Stover with a Coupled Particle- and Reactor-Scale Framework

Autothermal operation of fast pyrolysis is an efficient process-intensification technique wherein exothermic oxidation reactions are used to overcome the heat-transfer bottleneck of conventional pyrolysis. The development of accurate, reliable modeling toolsets is imperative to generating a deeper understanding of biomass autothermal pyrolysis systems to support scale-up and industrial deployment. This modeling effort describes the development of single-particle and reactor models which incorporate detailed reaction schemes and simultaneous exothermic oxidation reactions. The particle-scale model was parameterized for corn stover feedstock with particle morphology, density, ash content, and biopolymer composition, all of which impact the emergent conversion characteristics during pyrolysis. Results were then used to parameterize a reactor-scale autothermal pyrolysis model, which was developed using a coarse-grained computational fluid dynamic-discrete element method. The simulation results compared well with experimental results, with the predicted bio-oil, light gas, and biochar yield within 3.0 wt% of the experimental yields. Further analyses were performed to test the influence of equivalence ratio, biomass injection position, and particle size distribution on autothermal pyrolysis. The analysis of the physio-chemical properties of the fluid and solid phase inside the reactor and at the reactor outlet help reveal important process interactions of autothermal pyrolysis.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2022

Elucidating the role of reactive nitrogen intermediates in hetero-cyclization during hydrothermal liquefaction of food waste

Hydrothermal liquefaction (HTL) has emerged as a promising strategy for converting abundant, water-rich organic streams into an energy-dense, sustainable, biocrude. Despite major strides in improving oil yields and process intensification, a key underlying challenge persists in relating the composition of the feedstock to the ultimate fate of nitrogen, which is especially important for biocrude quality. To elucidate how nitrogen partitions into the respective gas, aqueous, oil and solid hydrothermal products, food waste was treated under HTL conditions (15 wt% solids, 575 K reaction temperature, and 1 hour reaction time) and elemental, chromatographic and mass spectroscopy analyses were performed on the products to establish dominant product classes and to close mass, carbon, and nitrogen balances. Liquid products (aqueous and biocrude) were found to contain nearly 60% of the nitrogen, with a majority of the biocrude-phase nitrogen in the form of amides. Ab initio thermodynamic and kinetic simulations on model reactants were used to evaluate potential reaction pathways involving reactive nitrogen intermediates. A subsequent kinetic model was evaluated at reaction temperatures ranging 300–1000 K and for a range of feedstock compositions to identify primary reaction pathways. The Maillard reaction is revealed to be the dominant pathway for converting reactive nitrogen intermediates into observed products, especially those in which nitrogen is present as a heterocyclic aromatic. Subsequent product analysis by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) confirms strong agreement among the experimental data, kinetic model and proposed Maillard pathways.

09 BIOMASS FUELS↗
DOE OSTI2023

Transient Efficiency, Flexibility, and Reliability Optimization of Coal-Fired Power Plants - Final Report

This program developed an advanced model-based monitoring and model-predictive control algorithms for a coal fired power plant (CFPP), and deployed these algorithms in a real-time platform to demonstrate performance benefits for transient flexibility and plant operation efficiency. More specifically, the objectives were successfully achieved through a combination of (i) developing a high-fidelity transient plant model in Apros, which was used as a high-fidelity plant simulation between $100-50\% TMCR$ where TMCR denotes the turbine maximum continuous rating, i.e., baseload, (ii) developing a very fast physics-based reduced-order model (ROM) of the plant, which ran more than $100\times$ faster than real-time, enabling its use as real-time embedded model for model-based estimation (MBE) and model predictive control (MPC) (iii) implementing a real-time MBE based on ROM using a robust unscented Kalman filter (UKF) to continuously tune the ROM to match the measurements from high-fidelity Apros plant model despite significant plant-model mismatch, and thus, obtain a Digital Twin of the plant (iv) designing and implementing a real-time MPC with dual objectives of transient plant load tracking with high ramp rates and minimizing coal consumption, i.e., improving plant efficiency in the baseload-partload operation range of $100-50\% TMCR$. Each key element above was developed and tested individually, and has been reported in corresponding Topical Reports. Finally, all the individual elements were integrated in an overall closed-loop system, that was successfully tested in desktop Simulink test harness simulations with ROM or high-fidelity model as the plant. Thereafter, the Simulink implementation was used to auto-generate C-code and deploy as real-time Docker microservice containers in Linux, and validate that they can run in real-time in the hardware-in-the loop (HIL) setup and produce the same results as in Simulink. The results of the integrated simulation tests in Simulink as well as the real-time HIL deployment are documented in this final report, showing good load tracking for load ramps at $3-4\%/min$ ramp rates, and achieving up to $5.5\%$ reduction in coal relative to baseline operation at $50\% TMCR$ load. The desktop and HIL simulations show successful performance of the overall model based estimation and control solution and achieve the key objectives of the program for flexible, efficient and reliable operation of subcritical coal fired power plants.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

Fundamental Study of Uranium Dendrites Electrochemically Separated in Molten Salt with the Presence of Cerium

In this study, uranium was electrochemically separated in the presence of cerium in eutectic LiCl-KCl at varying concentrations of cerium and varying overpotentials. Harvested dendrites were then examined and analyzed for their morphological features and elemental composition using various analytical techniques. Conclusions: Increasing the applied overpotential causes the dendrites to evolve from relatively simple and large platelet-like crystals (25 mV), to a grid-like network with crystals having jagged and smooth features (50 mV, 100 mV), and finally into a very chaotic and complex crystal morphology (200 mV) for all uranium-cerium compositions explored. Varying the uranium:cerium concentration ratio did not have much effect on the uranium dendrite morphologies. EDS results show that cerium is not co-deposited on the surface of the dendrite crystals, ICP-MS results do show a presence of cerium in the volumetric composition. This is likely due to salt occlusion during the dendrite formation. XRD has been performed on several samples at the 25 mV overpotential with 1 wt% U and 0 wt% Ce in the molten salt eutectic. These results indicate that there is not salt occlusion within the dendrites during electrochemical separation. Additionally, the uranium metal quickly oxidizes during preparation for XRD.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Development of Corrosion- and Erosion-Resistant Coatings for Advanced Ultra-Supercritical Materials

This final report summarized the research efforts and major findings of the Phase I Project “Development of Corrosion- and Erosion-Resistant Coatings for Advanced Ultra-Supercritical Materials”, for the period of October 1, 2019 – Sept. 30, 2021. This project is a collaborative endeavor between Tennessee Tech University, Purdue University, Oak Ridge National Laboratory, Siemens Corporation, and Eastern Plating, LLC, aiming at improving the durability and lifetime of high-pressure (HP) steam turbine blades in advanced ultra-supercritical (A-USC) coal-fired power plants through the development of corrosion/erosion-resistant coatings manufactured via a low-cost electrolytic codeposition process. While Tribaloy alloy T-400C was identified by the U.S. A-USC Materials Consortium as a promising coating composition, further composition optimization is needed to enhance its corrosion and erosion resistance for protecting the A-USC Ni-base turbine components. An integrated computational and experimental approach was employed to optimize coating composition/microstructure and processing parameters. In order to identify candidate coating compositions that could offer balanced properties, thermodynamic calculations were performed to explore the γ+Laves composition space in the Co-Ni-Cr-Mo-Si system with different alloying additions at 600-800 °C. Guided by the calculation results, experimental assessment of selected alloys led to the development of a new generation of Tribaloy compositions with the optimal levels of Cr, Mo and Si, reactive element (e.g., 0.4-0.6 wt.% Y) and other alloying additions. The low-cost and non-line-of-sight electro-codeposition process was employed to deposit a Ni(Co)-CrMoSiY composite coating on commercial Haynes 282 (H282) Ni-base alloy. A diffusion treatment was subsequently applied to convert the composite to the Tribaloy-type coating. Both the codeposition parameters and heat treatment conditions were varied to achieve the desired coating composition, microstructure and phase constituents. In addition, since additive manufacturing (AM) may be an alternative cost-saving option for potential A-USC turbine repair, laser direct deposition was explored to fabricate the H282 alloy with minimal defects. The electro-codeposited Tribaloy coating was also applied to the AM H282 substrate to demonstrate the viability of the coating process in improving the surface finish of AM alloys. Both high-temperature oxidation performance and solid particle erosion (SPE) resistance of model alloys and electro-codeposited coatings were evaluated. About 25 model alloys with various Cr/Mo ratios and reactive element levels, as well as partial substitution of Mo with Nb were evaluated with regard to their oxidation resistance in both air and pure steam at 760-800°C. Compositions based on Ni(Co)-20Cr-18Mo-2.6Si-0.6Y (wt.%) showed significantly improved oxidation resistance over the baseline T400-C. Based on the alloy development results, three generations of new Tribaloy coatings (Gen-1, Gen-2, and Gen-3) with various Mo/Cr contents and Y levels were prepared via electro-codeposition and their microstructure/performance were evaluated. Outstanding air and steam oxidation resistance was achieved for the Gen-2 and Gen-3 coatings. Furthermore, while the SPE resistance of the coatings depended on many factors such as temperature, environment, erodent, velocity and impact angle, the coated samples exhibited similar or better SPE resistance compared to the H282 substrate when magnetite was used as erodent (which is a realistic erodent in A-USC steam turbines). The new Tribaloy coatings also had good long-term compatibility with the H282 alloy substrate. The two large-sized rotating barrels were designed, constructed, and employed to coat dummy HP blades. Uniform coating thickness and microstructure were achieved at various blade locations. Also, a preliminary techno-economic analysis of the proposed coating process was conducted to quantify the cost-effectiveness and to assess the commercial viability of the corrosion- and erosion-resistant coatings. It is estimated that a cost reduction of ~30% could be achieved with the electro-codeposition coating process over the state-of-the-art high velocity oxygen fuel (HVOF) thermal spray. Compared to the leading Tribaloy coating technologies such as HVOF and plasma transfer alloying, electro-codeposition based process has advantages such as low-cost process equipment, uniform deposition even for complex shapes, low levels of contaminants/porosities, reduction of powder waste, and potentially better surface finish and longer turbine service life. The Phase 1 study has demonstrated that it is feasible to develop an electro-codeposited Tribaloy coating with balanced corrosion and erosion properties, even though additional research efforts such as further coating process scale-up and longer-term performance evaluation under realistic A-USC conditions are clearly needed.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Transient Efficiency, Flexibility, and Reliability Optimization of Coal-Fired Power Plants - Final Program Review

This program developed an advanced model-based monitoring and model-predictive control algorithms for a coal fired power plant (CFPP), and deployed these algorithms in a real-time platform to demonstrate performance benefits for transient flexibility and plant operation efficiency. More specifically, the objectives were successfully achieved through a combination of (i) developing a high-fidelity transient plant model in Apros, which was used as a high-fidelity plant simulation between $100-50\% TMCR$ where TMCR denotes the turbine maximum continuous rating, i.e., baseload, (ii) developing a very fast physics-based reduced-order model (ROM) of the plant, which ran more than $100\times$ faster than real-time, enabling its use as real-time embedded model for model-based estimation (MBE) and model predictive control (MPC) (iii) implementing a real-time MBE based on ROM using a robust unscented Kalman filter (UKF) to continuously tune the ROM to match the measurements from high-fidelity Apros plant model despite significant plant-model mismatch, and thus, obtain a Digital Twin of the plant (iv) designing and implementing a real-time MPC with dual objectives of transient plant load tracking with high ramp rates and minimizing coal consumption, i.e., improving plant efficiency in the baseload-partload operation range of $100-50\% TMCR$. Each key element above was developed and tested individually, and has been reported in corresponding Topical Reports. Finally, all the individual elements were integrated in an overall closed-loop system, that was successfully tested in desktop Simulink test harness simulations with ROM or high-fidelity model as the plant. Thereafter, the Simulink implementation was used to auto-generate C-code and deploy as real-time Docker microservice containers in Linux, and validate that they can run in real-time in the hardware-in-the loop (HIL) setup and produce the same results as in Simulink. The results of the integrated simulation tests in Simulink as well as the real-time HIL deployment are documented in this final report, showing good load tracking for load ramps at $3-4\%/min$ ramp rates, and achieving up to $5.5\%$ reduction in coal relative to baseline operation at $50\% TMCR$ load. The desktop and HIL simulations show successful performance of the overall model based estimation and control solution and achieve the key objectives of the program for flexible, efficient and reliable operation of sub-critical coal fired power plants.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Chemical Kinetics for the Oxidation of Californium(III) Ions with Select Radiation-Induced Inorganic Radicals (Cl 2 •– and SO 4 •– )

Despite the availability of transuranic elements increasing in recent years, our understanding of their most basic and inherent radiation chemistry is limited and yet essential for accurate interpretation of their physical and chemical properties. Here, in this work, we explore the transient interactions between trivalent californium ions (Cf 3+ ) and select inorganic radicals arising from the radiolytic decomposition of common anions and functional group constituents, specifically the dichlorine (Cl 2 •- ) and sulfate (SO 4 •- ) radical anions. Chemical kinetics, as measured by integrated electron pulse radiolysis and transient absorption spectroscopy techniques, are presented for the reactions of these two oxidizing radicals with Cf 3+ ions. The derived and ionic strength corrected second-order rate coefficients (k) for these radiation-induced processes are k(Cf 3+ + Cl 2 •- ) = (8.28 ± 0.61) × 10 5 M -1 s -1 and k(Cf 3+ + SO 4 •- ) = (9.50 ± 0.43) × 10 8 M -1 s -1 under ambient temperature conditions (22 ± 1 °C).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Integrating Crack Detection and Pipe Shape Optimization for Enhanced Sewage System Durability

Crack detection in underground reinforced concrete pipes has been essential in determining the state of stormwater infrastructure. Detection models have been implemented for detecting cracks and other defects in pipes using CCTV footage for stormwater drainage systems. In addition, Finite element models have been used to determine optimum shapes and pipe thickness for different boundary conditions such as header pipes in power plants. The concept of shape optimization emerges as a crucial factor in power plant design and operation, with the potential to maximize performance while minimizing the use of materials. Shape optimization not only enhances efficiency but also contributes to reducing the environmental footprint. This paper discusses the integration of both topics by using the cracks detected in underground pipes as boundary conditions for shape optimization of the pipes. A machine learning model has been developed which uses limited data for training and outlines the location of detected cracks. A shape optimization methodology is proposed in which ANSYS modules are used to analyze fluid flow and then optimize the shape of the pipe. The crack detection model developed has been applied to a crack detected in lab setting and machine learning model used has an accuracy of 98% using a random forest algorithm.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Multi-Scale Seismic Measurements for Site Characterization and CO2 Monitoring in an Enhanced Oil Recovery/Carbon Capture, Utilization, and Sequestration Project, Farnsworth Field, Texas

To address the challenges of climate change, significantly more geologic carbon sequestration projects are beginning. The characterization of the subsurface and the migration of the plume of supercritical carbon dioxide are two elements of carbon sequestration that can be addressed through the use of the available seismic methods in the oil and gas industry. In an enhanced oil recovery site in Farnsworth, TX, we employed three separate seismic techniques. The three-dimensional (3D) surface seismic survey required significant planning, design, and processing, but produces both a better understanding of the subsurface structure and a three-dimensional velocity model, which is essential for the second technique, a timelapse vertical seismic profile, and the third technique, cross-well seismic tomography. The timelapse 3D Vertical Seismic Profile (3D VSP) revealed both significant changes in the reservoir between the second and third surveys and geo-bodies that may represent the extent of the underground carbon dioxide. The asymmetry of the primary geo-body may indicate the preferential migration of the carbon dioxide. The third technique, cross-well seismic tomography, suggested a strong correlation between the well logs and the tomographic velocities, but did not observe changes in the injection interval.

Energy & Fuels↗
DOE OSTI2022

Efficient, Compact, and Smooth Variable Propulsion Motor (Final Report)

In this project, a new architecture of highly efficient hydraulic motor was developed for the propulsion of off-highway vehicles. The motor uses an adjustable linkage driving a cam to vary the displacement of the piston, resulting in a Variable Displacement Linkage Motor (VDLM). The motor uses low friction rolling element bearings to significantly reduce mechanical friction, especially in the demanding low-speed high-torque conditions experienced by off-highway vehicles. The VDLM has high torque capabilities for its size due to the radial piston packaging and use of a multi-lobe cam. A VDLM is very smooth due to the ability to tune the torque ripple through the design of the cam profile. The project was divided into three periods. During the first period, a dynamic model was constructed of the motor to predict the performance of the motor and the vehicle. During the second period, a single-cylinder learning prototype was designed, built, and tested to validate the models constructed in the first period. In the third period, a multi-cylinder prototype motor was optimized, designed, fabricated, and tested. The motor demonstrated excellent mechanical efficiency (above 92.5% across the range of displacements), but the experimentally measure volumetric efficiency was lower than expected due to higher leakage rates created by the poor tolerance control on the prototype. To validate the dynamic models developed in the first period and better understand design trade-offs. In the third period a multi-cylinder concept demonstration prototype will be designed, fabricated, and tested. The final prototype will be tested on a motor dynamometer and will be utilized in hardware-in-the-loop testing to demonstrate its efficiency and performance impacts on the overall drive train. The experimental results were used in a drive train simulation of a compact track loader operating through a drive cycle. Using the VDLM in a hydrostatic circuit yielded 17.1% reduction in fuel consumption and 36.5% reduction in a series hybrid transmission.

99 GENERAL AND MISCELLANEOUS↗