Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frequency selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

One-Pot Pyrolysis Method to Fabricate Carbon Nanotube Supported Ni Single-Atom Catalysts with Ultrahigh Loading

The practical application of single atom catalysts (SACs) is constrained by the low achievable loading of single metal atoms. In this work, nickel SACs stabilized on a nitrogen-doped carbon nanotube structure (NiSA-N-CNT) with ultrahigh Ni atomic loading up to 20.3 wt % have been successfully synthesized using a new one-pot pyrolysis method employing Ni acetylacetonate (Ni(acac) 2 ) and dicyandiamide (DCD) as precursors. The yield and formation of NiSA-N-CNT depends strongly on the Ni(acac) 2 /DCD ratio and annealing temperature. Pyrolysis at 350 and 650 °C led to the formation of Ni single atom dispersed melem and graphitic carbon nitride (Ni-melem and Ni-g-C 3 N 4 ). Transition from a stacked and layered Ni-g-C 3 N 4 structure to a bamboo-shaped tubular NiSA-N-CNT structure most likely occurs via a solid-to-solid curling or rolling-up mechanism, thermally activated at temperatures of 700–900 °C. Extended X-ray absorption fine structure (EXAFS) experiments and simulations show that Ni single atoms are stabilized in the N-CNT structure through nitrogen coordination, forming a structure with four nearest N coordination shell surrounded by two carbon shells, Ni–N 4 . The NiSA-N-CNT catalysts show an excellent activity and selectivity for the electrochemical reduction of CO 2 , achieving a turnover frequency (TOF) of 11.7 s–1 at -0.55 V (vs RHE), but a low activity for the O 2 reduction and O 2 evolution reactions, as compared to Ni nanoparticles supported on N-CNTs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Marker-free carotenoid-enriched rice generated through targeted gene insertion using CRISPR-Cas9

Targeted insertion of transgenes at pre-determined plant genomic safe harbors provides a desirable alternative to insertions at random sites achieved through conventional methods. Most existing cases of targeted gene insertion in plants have either relied on the presence of a selectable marker gene in the insertion cassette or occurred at low frequency with relatively small DNA fragments (<1.8 kb). Here, we report the use of an optimized CRISPR-Cas9-based method to achieve the targeted insertion of a 5.2 kb carotenoid biosynthesis cassette at two genomic safe harbors in rice. We obtain marker-free rice plants with high carotenoid content in the seeds and no detectable penalty in morphology or yield. Whole-genome sequencing reveals the absence of off-target mutations by Cas9 in the engineered plants. These results demonstrate targeted gene insertion of marker-free DNA in rice using CRISPR-Cas9 genome editing, and offer a promising strategy for genetic improvement of rice and other crops.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Communicating the Impacts of Projected Climate Change on Heavy Rainfall Using a Weighted Ensemble Approach

Urban flood risks are often determined by the frequency analysis of observed rainfall data, communicated using isohyetal maps showing rainfall totals for a range of durations and recurrence intervals. However, to assess future changes in heavy rainfall, it is necessary to study the future projected rainfall time series. Impacts of climate change are typically assessed using climate projections based on global climate model (GCM) outputs and downscaled to finer temporal and spatial scales. The projected data, however, are not generated in a format that urban planners and engineers can easily use to design for future conditions. This paper presents a method to analyze and express climate data in a format that can be readily used in hydrologic models to assess the effects of future extreme rainfall events. Future conditions’ climate data were analyzed using a weighted ensemble approach, which resulted in projected rainfall frequency estimates and their confidence limits. Two multimodel data sets were selected to illustrate this approach in Cook County, Illinois, which belongs to the Chicago metropolitan area. The first data set included statistical downscaling data based on the Intergovernmental Panel for Climate Change’s (IPCC) Coupled Model Intercomparison Project Phase 3 (CMIP3) data. The weighted ensemble analysis applied to this data set produced results that indicated significant increases in projected heavy rainfall. For example, for CMIP3 Scenario A2, for the late 21st century, the 100-year, 24-h rainfall in the northern parts of the county was 29% larger than the model-generated rainfall for the present time. Finally, for the same time horizon and scenario, the confidence interval based on projected data was 87% wider compared with that of the published source (NOAA Atlas 14), calculated using the past observed data. Also, equal-weight delta-corrected IPCC CMIP5-based dynamical downscaling data were applied to the same region for the mid-21st century, producing increases in heavy rainfall fairly similar to those of CMIP3.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Self-consistent continuum solvation for optical absorption of complex molecular systems in solution

We introduce a new method to compute the optical absorption spectra of complex molecular systems in solution, based on the Liouville approach to time-dependent density-functional perturbation theory and the revised self-consistent continuum solvation model. The former allows one to obtain the absorption spectrum over a whole wide frequency range, using a recently proposed Lanczos-based technique, or selected excitation energies, using the Casida equation, without having to ever compute any unoccupied molecular orbitals. The latter is conceptually similar to the polarizable continuum model and offers the further advantages of allowing an easy computation of atomic forces via the Hellmann-Feynman theorem and a ready implementation in periodic-boundary conditions. The new method has been implemented using pseudopotentials and plane-wave basis sets, benchmarked against polarizable continuum model calculations on 4-aminophthalimide, alizarin, and cyanin and made available through the QUANTUM ESPRESSO distribution of open-source codes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Tunable configurational anisotropy in collective magnetization dynamics of Ni{sub 80}Fe{sub 20} nanodot arrays with varying dot shapes

We present broadband ferromagnetic resonance measurements of tunable spin wave anisotropy in arrays of nanodots with different dot shapes. Magnetization dynamics of the circular dot array shows two modes, while square, diamond, and triangular dot arrays show three, three, and four modes, respectively. Various distinct rotational symmetries in the configurational anisotropy of the nanodot arrays are observed with the variation of dot shape. The observed spin wave modes are reproduced by micromagnetic simulations and the calculated mode profiles show different collective modes determined by internal and stray magnetic fields. Effects of dot shapes are observed in combination with the effects of lattice symmetry and the shape of the boundary of the array. The collective behaviour is observed to be weakest in the diamond shaped dots and strongest in circular shaped dots. This is further confirmed by the stray field calculation. The large variation of spin wave mode frequencies and their configurational anisotropies with dot shapes are important for selection of suitable basis structures for future magnonic crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Untangling the contributions of cerium and iron to the magnetism of Ce-doped yttrium iron garnet

The remarkable magnetic properties of yttrium iron garnets (YIGs) underpin the use of these materials in a broad scope of spintronic and photonic applications. In particular, the addition of rare earth metals in the structure enhances to a great extent the magneto-optical activity, which is beneficial for the development of nonreciprocal optical devices. Exploiting the wavelength selectivity of magneto-optics, we have identified a range of frequencies at which one can unravel the individual contributions to the magnetism and gyrotropic response arising from cerium and iron. We envision that this outcome may pave the way to further experiments to assess quantitatively the effect on the optical properties of rare earth incorporation into YIG.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Site-specific generation of excited state wavepackets with high-intensity attosecond x rays

High-intensity attosecond x rays can produce coherent superpositions of valence-excited states through two-photon Raman transitions. The broad-bandwidth, high-field nature of the pulses results in a multitude of accessible excited states. Multiconfigurational quantum chemistry with the time-dependent Schrödinger equation is used to examine population transfer dynamics in stimulated x-ray Raman scattering of the nitric oxide oxygen and nitrogen K-edges. Two pulse schemes initiate wavepackets of different characters and demonstrate how chemical differences between core-excitation pathways affect the dynamics. The population transfer to valence-excited states is found to be sensitive to the electronic structure and pulse conditions, highlighting complexities attributed to the Rabi frequency. The orthogonally polarized two- color-pulse setup has increased selectivity while facilitating longer, less intense pulses than the one-pulse setup. Population transfer in the 1s → Rydberg region is more effective but less selective at the nitrogen K-edge; the selectivity is reduced by double core-excited states. Result interpretation is aided by resonant inelastic x-ray scattering maps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Condition Monitoring of Wind Turbine Planetary Gearboxes Under Different Operating Conditions

Digitally enhanced services for wind power could reduce Operations and Maintenance costs as well as the Levelised Cost Of Energy. Therefore, there is a continuous need for advanced monitoring techniques which can exploit the opportunities of Internet of Things and Big Data Analytics. The heart of wind turbines is an epicyclic gearbox and rolling element bearings are often responsible for machinery stops. The vibration signatures of bearings are rather weak compared to other components. As a result a number of signal processing techniques have been proposed, focusing towards accurate and early fault detection with limited false alarms and missed detections. In Envelope Analysis an envelope of the vibration signal is estimated usually after filtering around a frequency band. Different tools, such as Kurtogram, have been proposed to select the optimum filter parameters. Monitoring techniques have reached a mature level for steady speed and load operating conditions. On the other hand, under chaniging operating conditions, it is still unclear whether the change of the monitoring indicators is due to the change of the machinery's health or due to the change of operating parameters. Recently, the authors have proposed a new tool called IESFOgram, based on Cyclic Spectral Coherence for the automatic selection of the filtering band. In this paper, the performance of the tool is evaluated on the National Renewable Energy Laboratory wind turbine gearbox vibration condition monitoring benchmarking data set which includes various faults with different levels of diagnostic complexity as well as various speed and load operating conditions.

17 WIND ENERGY↗
DOE OSTI2023

False Indications of Dose-Response Nonlinearity in Large Epidemiologic Cancer Radiation Cohort Studies; A Simulation Exercise

This study explores the likely prevalence of false indications of dose-response nonlinearity in large epidemiologic cancer radiation cohort studies (A-bomb survivors, INWORKS, Techa River). Reasons: Increasing numbers of tests of nonlinearity are being made in studies. Hypothesized nonlinear dose-response models have been justified to policy makers by analyses that rely in part on isolated findings that could be statistical fluctuations. After removing dose nonlinearity (linearization) by adjusting person-years of observation at each dose category, indications of nonlinearity, necessarily false, were counted in 5,000 randomized replications of six datasets. The average frequency of any false positive for five indicators of nonlinearity tested against a linear null was roughly 25% in Monte Carlo simulations per study, consistent with binomial calculations, increasing to ~50% within 6 studies assessed. Comparable frequencies were found using Akaike's information criterion (AIC) for model selection or multi-model averaging. False above-zero threshold doses were found more than 50% of the time, averaging to 0.05 Gy, consistent with findings in the 6 studies. Such bias, uncorrected, could distort meta-analyses of multiple studies, because meta-analyses can incorporate high P value findings. AIC-based correction for the extra threshold parameter lowered these false occurrences to 8 to 19%. Given the simulation rates, the possibility of false positives might be noted when isolated findings of nonlinearity are discussed in a regulatory context. When reporting a threshold dose with a P value > 0.05, it would be informative to note the expected high false prevalence rate due to bias.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2023

Guidelines for Determining the Load Resistance of Thin-Glass Triple-Pane Insulating Glass Unit Configurations

This guideline is intended to provide information relevant to the specification of triple- pane insulating glass (IG) units where the thickness of lite number 2 (center lite) is less than or equal to the thickness of lite numbers 1 and 3. Procedures and charts are presented to determine the load resistance (LR) of common soda-lime glass thicknesses from 0.7 mm (3/128 in.) to 1.8 mm (9/128 in.) exposed to a uniform lateral load of short or long duration, for a 0.008 probability of breakage. Deflection under load, horizontal self-weight deflection, and natural frequency procedures and charts are also included to aide in the selection of glass thickness to meet manufacturing and/or loading criteria determined by the user.

42 ENGINEERING↗
DOE OSTI2024

Waveguides for neurostimulation in the cochlea

Introduction Optical stimulation has been suggested for neural stimulation to improve cochlear implants. Light allows for more spatially selective activation of neuron populations than electrical current, offering more independent frequency bands along the spiral ganglion. These bands are available to encode acoustic information with anticipated better frequency resolution, improving cochlear implant user performance in noisy listening environments, tonal languages, and music perception. Methods Optical cochlear implants (oCIs) can deliver light either directly via small emitters within the cochlea or via waveguides from external optical sources. We investigated three waveguide designs made from OrmoComp ® , a polymer that cures through ultraviolet (UV) radiation. Waveguides were fabricated via injection molding and coated using dip-coating or thermal reflow, or through aspiration of OrmoComp ® into polyimide tubing that served as the cladding of the waveguide. The choice of fabrication technique directly determined the waveguides' total diameter: thermal reflow yielded ≈940 μm, dip-coating produced ≈306 μm, and aspiration resulted in ≈132 μm core diameter waveguides. Given the human cochlea's small size, we focused on analyzing the 306-μm and 132-μm waveguides, evaluating their optical performance (propagation and bending losses) and mechanical properties (bending stiffness and insertion forces). Furthermore, we evaluated some of these designs in in-vivo guinea pigs experiments. Results For the 100-μm core diameter waveguides, the propagation losses were 12.34 ± 1.26, 1.18 ± 0.88, 1.49 ± 0.58, and 3.43 ± 0.68 dB/cm at 534, 1,375, 1,460, and 1,550 nm, respectively. The respective bending losses at a 2 mm radius of curvature were 5.50 ± 1.32, 0.56 ± 0.26, 0.79 ± 0.18, and 0.64 ± 0.23 dB, and at 1 mm 8.54 ± 1.30, 2.05 ± 0.84, 2.11 ± 0.50, and 1.44 ± 0.37 dB. The bending stiffness of a 1 mm segment of the 100-μm-diameter waveguides was 18.9 ± 2.2 N/m. Insertion forces for the 100-μm-diameter waveguides into an acrylic human-size scala tympani model were < 25 mN. For the waveguides with 306 and 940 μm total diameter, the propagation losses ranged between 0.43 and 2.40 dB/cm at 534, 680, 1,375, and 1,550 nm, between 2.19 and 3.78 dB/cm at 450 and 1,460 nm. Bending losses for 360 degrees at 1,375 nm were 5.0, 2.4, and 0.46 for a bending radius of 2.5-, 3-, and 4-mm. Discussion Our study demonstrated that the polymer OrmoComp ® is suitable for fabricating waveguides to transmit near-infrared radiation. In-vivo experiments showed optically evoked auditory responses originating from optical stimulation in the guinea pigs' first cochlear turn while radiation was delivered. Incoming experiments will focus on evaluating long-term performance of these waveguides in guinea pigs and cats. This study will be designed to provide insights into the waveguides' performance and biocompatibility over extended periods, essential for their potential clinical application in future oCIs.

Kim, Matthew↗
DOE OSTI2018

Comparative Aerial and Ground Based High Throughput Phenotyping for the Genetic Dissection of NDVI as a Proxy for Drought Adaptive Traits in Durum Wheat

Global warming and the increasing frequency and severity of drought events unequivocally underline the urgency to select crops able to sustain growth in rainfed conditions, particularly when grown in Mediterranean countries, where climatic change is expected to exacerbate yield uncertainty (Ortiz et al., 2008; Kelley et al., 2015; Kyratzis et al., 2017). The selection of drought-resistant cultivars increasingly relies on the use of yield-related proxies selected either directly (Reynolds and Tuberosa, 2008) or via marker-assisted selection once the quantitative trait loci (QTLs) underpinning the variability of the relevant trait are identified (Langridge and Reynolds, 2015; Maccaferri et al., 2016; Mason et al., 2018).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Bifunctional Heterometallic Metal-Organic Frameworks for Solvent-Free Heterogeneous Cascade Catalysis

A family of heterometallic metal-organic frameworks (MOFs) (CPM200s) harmoniously coexisting as Lewis acids and base (azo) sites were prepared. Seven CPM200s were employed as multifunctional heterogeneous cascade catalysts for the one-pot deacetalization-Knoevenagel reaction in a solvent-free system. Benefiting from the cooperation between Lewis acids from the open metal sites and base sites from the ligands, the CPM200s showed high activity and selectivity for the tandem reaction. The heterometallic 3D porous framework reported here not only offers a combination of two opposite active sites in the same framework of materials but also increases mass transfer of the substrate, thus maximizing the efficiency and substrate selectivity of the bifunctional catalysts. The CPM200s showed the highest turnover frequency (TOF), outperforming that of the reported MOFs in tandem with the deacetalization-Knoevenagel reaction. A strong correlation between the TOF and charge-to-radius ratio (z/r) of metal ions in the CPM200s was observed for the first time. The bifunctional CPM200s catalysts can be reused five times without significant loss of activity.

36 MATERIALS SCIENCE↗
NASA NTRS1980

CDS solid state phase insensitive ultrasonic transducer

A phase insensitive ultrasonic transducer which includes a CdS crystal that is annealed for a selected period of time and at a selected temperature to provide substantially maximum acoustic attenuation at the operating frequency of the transducer is described. Two electrodes are attached to the crystal with amplifier means and a signal processing system connected to one of the electrodes to provide an ultrasonic receiver.

Heyman, J. S.↗
NASA NTRS1980

Shuttle orbiter Ku-band radar/communications system design evaluation. Ku band bent-pipe channel performance evaluation

Because of difficulties with the bit detector of the SPA mode 1 channel 3 input port, a new bit synchronizer was required. The two prime candidate designs are described and analyzed. The selected design is a modification of one which utilizes a phase frequency detector to track the received data clock frequency and a mid-bit transition point sample detector to generate a bit timing error (phase error) signal to control the relative phase between the local clock and the local data stream. The model used to calculate the effects of cable attenuation and rise time degradation is discussed.

Holmes, J. K.↗
NASA NTRS1978

A 12 GHz satellite video receiver: Low noise, low cost prototype model for TV reception from broadcast satellites

A 12-channel synchronous phase lock video receiver consisting of an outdoor downconverter unit and an indoor demodulator unit was developed to provide both low noise performance and low cost in production quantities of 1000 units. The prototype receiver can be mass produced at a cost under $1540 without sacrificing system performance. The receiver also has the capability of selecting any of the twelve assigned satellite broadcast channels in the frequency range 11.7 to 12.2 GHz.

Hreha, M. A.↗
NASA NTRS1985

Wideband Disturbance Accomodation in Precision Flexible Space Structures

Numerous spacecraft missions currently being formulated exhibit several basic and sharply conflicting features: selected components (e.g., an optical train) of inherently flexible structures are to maintain precision pointing performance in a wideband disturbance environment. Within the overall process of synthesizing an active controller to deal with this difficult problem, the aspects of reduced-order modelling and of actuator and sensor selection are crucial to the successful implementation of any controller feedback strategy. The principal focus in this paper is on the influence of actuator and sensor selection upon the effectiveness of a specified controller strategy for wideband disturbance accommodation. A genetic optical support structure is used for a number of design examples. Active transducer selections are made systematically based upon their direct contributuion to optical pointing error. Controller designs incorporating the various transducer selections exhibit stability in the presence of unmodeled modes over a frequency range substantially beyond the bandwidth of the disturbance.

Hegg, D. R.↗
NASA NTRS1984

Direct measurement of MPD thrust

An integrally mounted accelerometer has been used to obtain direct thrust measurements during operation of a magnetoplasmadynamic (MPD) thruster. The structural oscillations which can mask the accelerometer output have been ameliorated by stiffening the thruster to increase the lowest resonant frequency above the 1kHz region of interest. In addition, signal conditioning is used to provide a high signal-to-noise accelerometer output waveform. Impulse response measurement of the thruster frequency response function has proven to be an effective means of selecting the signal filter and estimating measurement errors. Comparison of the total impulse derived from the accelerometer output with that from a swinging arm thrust stand indicates 3 percent agreement, providing some confidence in the viability of the accelerometer thrust measurement technique.

Berg, J. M.↗