Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Density Functional Study of Perovskite Superconductor MgCNi{sub 3}

We here report the first principle density functional study of MgCNi{sub 3} which crystallize in cubic perovskite structure having critical transition temperature of 8 K. The interesting aspect of this compound is that in normal state it is non magnetic in nature despite conduction electrons in it are derived from partially filled Ni d states, which typically lead to ferromagnetism in metallic Ni and many Ni-based binary alloys. To investigate the detailed microscopic origin of the non magnetic nature we have done density functional based calculations on this compound. The lattice constant is calculated using minimum energy criteria from total energy versus lattice constant plot. By taking the calculated values of lattice constant we have done the precise calculations on the compound using Full Potential Linear Augmented Plane Wave (FP-LAPW) method implemented in ELK code. The electronic density of states is found spin degenerate that corresponds to a non-magnetic ground state. The density of states (DOS) at Fermi level, N(E{sub F}) is dominated by Ni-d states. The sharp peak observed just below Fermi level corresponds to van Hove singularity (vHs). The projected density of states (PDOS) suggests a strong hybridization of Ni-3d and C-2p states which is responsible for the observed non magnetic nature of MgCNi{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Frequency dependent dynamical electromechanical response of mixed ionic-electronic conductors

Frequency dependent dynamic electromechanical response of the mixed ionic-electronic conductor film to a periodic electric bias is analyzed for different electronic and ionic boundary conditions. Dynamic effects of mobile ions concentration (stoichiometry contribution), charge state of acceptors (donors), electron concentration (electron-phonon coupling via the deformation potential) and flexoelectric effect contribution are discussed. A variety of possible nonlinear dynamic electromechanical response of MIEC films including quasi-elliptic curves, asymmetric hysteresis-like loops with pronounced memory window and butterfly-like curves are calculated. The electromechanical response of ionic semiconductor is predicted to be a powerful descriptor of local valence states, band structure and electron-phonon correlations that can be readily measured in the nanoscale volumes and in the presence of strong electronic conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reduction in anti-ferromagnetic interactions in ion-beam deposited Fe{sub 3}O{sub 4} thin films

Phase pure Fe{sub 3}O{sub 4} thin films of thickness {approx}42 nm have been prepared on the Si(100) substrate by reactive ion beam sputtering in the growth temperature range of 150-250 deg. C. A high degree of phase purity in the 175 deg. C sample has been confirmed by the XRD, Raman shift, and R-T measurements. The polycrystalline films show a sharp Verway transition as supported by temperature dependent resistivity, AC susceptibility, and coercivity behavior. The significant feature of these films is the early saturation of their room temperature magnetization at {approx}400 mT, indicating the presence of low anti-ferromagnetic competitions in sharp contrast to most of the previous reports. The noticeable reduction of anti-phase boundaries and its dependence on growth temperature has been correlated with the energetic ion-beam deposition process, and explained in terms of the of ionic vacancy migration approach of Eerenstein et al.[Phys. Rev. B 68, 014428 (2003)]. The electronic conduction of these films is governed by near-neighbor hopping above 240 K and Shklovskii-Efros variable range hopping below this transition temperature.

36 MATERIALS SCIENCE↗

Molecular dynamics study of femtosecond laser interactions with Cr targets

The mechanisms of femtosecond laser melting, spallation and ablation of a chromium target are investigated in simulations performed with a hybrid computational model that combines the classical molecular dynamics method with a continuum description of the laser excitation of conduction band electrons, electron-phonon coupling, and electron heat conduction in the irradiated target. The material response to the irradiation by a 200 fs laser pulse is studied for laser fluences covering the regimes of melting and recrystallization of the surface region of the target, photomechanical separation (spallation) of a liquid layer, and explosive disintegration and ejection of a superheated surface region. The transition from the regime of transient surface melting to the spallation is manifested by a sharp increase of the total amount of ejected material (ablation yield) and decrease in the time required for resolidification of the surface region of the target. The transition from the spallation to the phase explosion regime is characterized by a remarkable change in the composition of the ejected ablation plume (smaller droplets and larger fraction of vapor phase), increase in the time for surface resolidification, and saturation or even decrease of the total ablation yield as compared to the spallation regime. The conditions that control the transitions between the three regimes and the mechanisms of laser melting, spallation and phase explosion are established for the chromium target and related to the results of earlier simulations performed for other metals and molecular systems.

Optics↗

Optoelectronic measurement of x-ray synchrotron pulses: A proof of concept demonstration

Optoelectronic detection using photoconductive coplanar stripline devices has been applied to measuring the time profile of x-ray synchrotron pulses, a proof of concept demonstration that may lead to improved time-resolved x-ray studies. Laser sampling of current vs time delay between 12 keV x-ray and 800 nm laser pulses reveal the {approx}50 ps x-ray pulse width convoluted with the {approx}200 ps lifetime of the conduction band carriers. For GaAs implanted with 8 MeV protons, a time profile closer to the x-ray pulse width is observed. The protons create defects over the entire depth sampled by the x-rays, trapping the x-ray excited conduction electrons and minimizing lifetime broadening of the electrical excitation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of charge compensation on the photoelectrochemical properties of Ho-doped SrTiO{sub 3} films

When Ho{sup 3+} ions are substituted at Sr{sup 2+} sites in SrTiO{sub 3} (STO), the excess positive charges are compensated via three complementary routes: (1) strontium vacancies, (2) titanium vacancies, and (3) conduction electrons. In this study, we show that the photoelectrochemical properties of Ho-doped STO films are dependent on the charge compensation mechanisms. The compensation mechanism via the titanium vacancies exhibits the highest photocurrent density, which is 1.7 times higher than that of the pure STO sample. Based on the measured dielectric properties and electrochemical impedance spectroscopy data, we propose that the enhanced dielectric constant of the films can enlarge the width of the space charge region at the film/liquid interface, which eventually leads to the increase of the photocurrent density. Further enhancement of photocurrent density is obtained in the samples decorated with appropriate amounts of Pt nanoparticles, showing the advantage of composites for achieving the efficient photoelectrochemical property.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunnel-injection quantum dot deep-ultraviolet light-emitting diodes with polarization-induced doping in III-nitride heterostructures

Efficient semiconductor optical emitters in the deep-ultraviolet spectral window are encountering some of the most deep rooted problems of semiconductor physics. In III-Nitride heterostructures, obtaining short-wavelength photon emission requires the use of wide bandgap high Al composition AlGaN active regions. High conductivity electron (n-) and hole (p-) injection layers of even higher bandgaps are necessary for electrical carrier injection. This approach requires the activation of very deep dopants in very wide bandgap semiconductors, which is a difficult task. In this work, an approach is proposed and experimentally demonstrated to counter the challenges. The active region of the heterostructure light emitting diode uses ultrasmall epitaxially grown GaN quantum dots. Remarkably, the optical emission energy from GaN is pushed from 365 nm (3.4 eV, the bulk bandgap) to below 240 nm (>5.2 eV) because of extreme quantum confinement in the dots. This is possible because of the peculiar bandstructure and band alignments in the GaN/AlN system. This active region design crucially enables two further innovations for efficient carrier injection: Tunnel injection of carriers and polarization-induced p-type doping. The combination of these three advances results in major boosts in electroluminescence in deep-ultraviolet light emitting diodes and lays the groundwork for electrically pumped short-wavelength lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermoelectric transport of Se-rich Ag{sub 2}Se in normal phases and phase transitions

Small amount of Se atoms are used to tune the carrier concentrations (n{sub H}) and electrical transport in Ag{sub 2}Se. Significant enhancements in power factor and thermoelectric figure of merit (zT) are observed in the compositions of Ag{sub 2}Se{sub 1.06} and Ag{sub 2}Se{sub 1.08}. The excessive Se atoms do not change the intrinsically electron-conducting character in Ag{sub 2}Se. The detailed analysis reveals the experiment optimum carrier concentration in Ag{sub 2}Se is around 5 × 10{sup 18} cm{sup −3}. We also investigate the temperature of maximum zT and the thermoelectric transport during the first order phase transitions using the recently developed measurement system.

36 MATERIALS SCIENCE↗

Random telegraph noise in metallic single-walled carbon nanotubes

We have investigated random telegraph noise (RTN) observed in individual metallic carbon nanotubes (CNTs). Mean lifetimes in high- and low-current states, τ{sub high} and τ{sub low}, have been studied as a function of bias-voltage and gate-voltage as well as temperature. By analyzing the statistics and features of the RTN, we suggest that this noise is due to the random transition of defects between two metastable states, activated by inelastic scattering with conduction electrons. Our results indicate an important role of defect motions in the 1/f noise in CNTs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Substitution behavior of x(Na{sub 0.5}K{sub 0.5})NbO{sub 3}-(1 − x)BaTiO{sub 3} ceramics for multilayer ceramic capacitors by a near edge x-ray absorption fine structure analysis

The doping effect of (Na{sub 0.5}K{sub 0.5})NbO{sub 3} (NKN) as alternatives for rare-earth elements on the electrical properties of BaTiO{sub 3} has been investigated, in terms of their substitution behavior. The dielectric constant of a specimen with x = 0.05 was about 79% higher than that of pure BaTiO{sub 3}, and the temperature coefficient of capacitance was satisfied by the X7R specification. The specimen with x = 0.05 showed the lowest tetragonality among the four compositions and had a fine grain size of <2 μm. Although the addition of NKN decreased the specimen's tetragonality, the electrical properties were enhanced by the formation of defect dipoles and conduction electrons, which resulted from an acceptor and donor substitution behavior. Through O K-edge near edge x-ray absorption fine structure spectroscopy, the practical substitution behavior was defined by the change in Ti 3d orbital states. The energy separation of the Ti 3d orbitals was more apparent with the specimen of x = 0.05, which is related to the donor level from the donor substitution of Nb{sup 5+} ion for Ti-sites. Therefore, the simultaneous substitution of Na{sup +}/K{sup +} and Nb{sup 5+} ions into BaTiO{sub 3} can improve dielectric properties, based on the charge-transfer process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mesodynamics with implicit degrees of freedom

Mesoscale phenomena—involving a level of description between the finest atomistic scale and the macroscopic continuum—can be studied by a variation on the usual atomistic-level molecular dynamics (MD) simulation technique. In mesodynamics, the mass points, rather than being atoms, are mesoscopic in size, for instance, representing the centers of mass of polycrystalline grains or molecules. In order to reproduce many of the overall features of fully atomistic MD, which is inherently more expensive, the equations of motion in mesodynamics must be derivable from an interaction potential that is faithful to the compressive equation of state, as well as to tensile de-cohesion that occurs along the boundaries of the mesoscale units. Moreover, mesodynamics differs from Newton's equations of motion in that dissipation—the exchange of energy between mesoparticles and their internal degrees of freedom (DoFs)—must be described, and so should the transfer of energy between the internal modes of neighboring mesoparticles. We present a formulation where energy transfer between the internal modes of a mesoparticle and its external center-of-mass DoFs occurs in the phase space of mesoparticle coordinates, rather than momenta, resulting in a Galilean invariant formulation that conserves total linear momentum and energy (including the energy internal to the mesoparticles). We show that this approach can be used to describe, in addition to mesoscale problems, conduction electrons in atomic-level simulations of metals, and we demonstrate applications of mesodynamics to shockwave propagation and thermal transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles investigation of the electronic and Li-ion diffusion properties of LiFePO{sub 4} by sulfur surface modification

We present a first-principles calculation for the electronic and Li-ion diffusion properties of the LiFePO{sub 4} (010) surface modified by sulfur. The calculated formation energy indicates that the sulfur adsorption on the (010) surface of the LiFePO{sub 4} is energetically favored. Sulfur is found to form Fe-S bond with iron. A much narrower band gap (0.67 eV) of the sulfur surface-modified LiFePO{sub 4} [S-LiFePO{sub 4} (010)] is obtained, indicating the better electronic conductive properties. By the nudged elastic band method, our calculations show that the activation energy of Li ions diffusion along the one-dimensional channel on the surface can be effectively reduced by sulfur surface modification. In addition, the surface diffusion coefficient of S-LiFePO{sub 4} (010) is estimated to be about 10{sup −11} (cm{sup 2}/s) at room temperature, which implies that sulfur modification will give rise to a higher Li ion carrier mobility and enhanced electrochemical performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical properties of metals: Infrared emissivity in the anomalous skin effect spectral region

When the penetration depth of an electromagnetic wave in a metal is similar to the mean free path of the conduction electrons, the Drude classical theory is no longer satisfied and the skin effect becomes anomalous. Physical parameters of this theory for twelve metals were calculated and analyzed. The theory predicts an emissivity peak ε{sub peak} at room temperature in the mid-infrared for smooth surface metals that moves towards larger wavelengths as temperature decreases. Furthermore, the theory states that ε{sub peak} increases with the emission angle but its position, λ{sub peak}, is constant. Copper directional emissivity measurements as well as emissivity obtained using optical constants data confirm the predictions of the theory. Considering the relationship between the specularity parameter p and the sample roughness, it is concluded that p is not the simple parameter it is usually assumed to be. Quantitative comparison between experimental data and theoretical predictions shows that the specularity parameter can be equal to one for roughness values larger than those predicted. An exhaustive analysis of the experimental optical parameters shows signs of a reflectance broad peak in Cu, Al, Au, and Mo around the wavelength predicted by the theory for p = 1.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Giant enhancement of terahertz emission from nanoporous GaP

In this paper, we have studied the emission of terahertz radiation from nanoporous semiconductor matrices of GaP excited by the femtosecond laser pulses. We observe 3–4 orders of magnitude increase of terahertz radiation emission from the nanoporous matrix compared to bulk material. The effect is mainly related to drastic increase of the sample surface and pinning of conducting electrons to surface states. This result opens up a promising way to create powerful sources of terahertz radiation using nanoporous semiconductors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tunable terahertz multichannel filter based on one-dimensional superconductor-dielectric photonic crystals

By means of the transfer matrix method, the transmission properties of one-dimensional photonic crystals (PCs) consisting of superconductor and dielectric have been systematically investigated within the terahertz frequency range (0.1–10 THz). It is shown that comb-like resonant peaks in transmission band can be formed without adding any defect layer in superconductor-dielectric PCs, which means that such a one-dimensional periodic structure can serve as a tunable terahertz multichannel filter by using the PCs passband. Furthermore, the influences coming from the period of the structure, the thickness of the components, the permittivity of the dielectric layers, temperature, and the normal conducting electrons on the filtering properties are also numerically investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical study of the interparticle interaction of nanoparticles randomly dispersed on a substrate

Metal nanoparticles exhibit the phenomenon of localized surface plasmon resonance (LSPR) due to the collective oscillation of their conduction electrons, which is induced by external electromagnetic radiation. The finite-differential time-domain (FDTD) method is widely used as an electromagnetic field analysis tool for nanoparticles. Although the influence of interparticle interactions is taken into consideration in the FDTD calculation for the plural particles configuration, the FDTD calculation of a random configuration is very difficult, particularly in the case of non-spherical particles. In this study, a theoretical calculation method incorporating interparticle interactions on a substrate with various particle shapes and sizes on a subwavelength scale is developed. The interparticle interaction is incorporated following FDTD calculation with an isolated single particle. This is explained systematically using a signal flow graph. Moreover, the mirror image effect of the substrate and the retardation effect are also taken into account in this method. The validity of this method is verified by calculations for simple arrangements of nanoparticles. In addition, it is confirmed that the method can improve the accuracy of predicted experimental results for Au nanoparticles prepared by the sputtering method, in terms of the plasmon peak wavelength. This method may enable the design of LSPR devices by controlling nanoparticle characteristics, such as the size, shape, and distribution density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Alternative material study for heat assisted magnetic recording transducer application

In heat assisted magnetic recording (HAMR), optical near field transducer (NFT) is a key component. Au is currently used as NFT material because of its strong surface plasmon effect. Due to the soft property of Au material, reliability of Au NFT becomes a key issue for realizing HAMR production. In this paper, the possibility of alternative materials, including transition metal nitrides (TMNs) and transparent conducting oxides (TCOs) to replace Au is studied. The results show that all of the listed TMN and TCO materials can meet the mechanical requirements at room temperature in terms of hardness and thermal expansion. An optical model, which includes optical waveguide, NFT and FePt media, is used to simulate NFT performances. The results indicate that the resonant wavelengths for NFT with TCO materials are longer than 1500 nm, which is not suitable for HAMR application. TMN materials are suitable for NFT application at wavelength band of around 800 nm. But the NFT efficiency is very low. ZrN is the best material among TMN materials and the efficiency of ZrN NFT is only 13% of the Au NFT's efficiency. Reducing refractive index (n) and increasing extinction coefficient (k) will both lead to efficiency increase. Increasing k contributes more in the efficiency increase, while reducing n has a relatively low NFT absorption. For materials with the same figure of merit, the NFT with larger k material has higher efficiency. Doping materials to increase the material conduction electron density and growing film with larger size grain may be the way to increase k and reduce n.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulation of the 2-dimensional Drude’s model using molecular dynamics method

In this paper, we reported the results of the simulation of the electronic conduction in solids. The simulation is based on the Drude’s models by applying molecular dynamics (MD) method, which uses the fifth-order predictor-corrector algorithm. A formula of the electrical conductivity as a function of lattice length and ion diameter τ(L, d) cand be obtained empirically based on the simulation results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗