Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “edge effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Approximate method for calculating transonic flow about lifting wing-body configurations: Computer program and user's manual

A user's manual is presented for a computer program which calculates inviscid flow about lifting configurations in the free-stream Mach-number range from zero to low supersonic. Angles of attack of the order of the configuration thickness-length ratio and less can be calculated. An approximate formulation was used which accounts for shock waves, leading-edge separation and wind-tunnel wall effects.

Barnwell, R. W.↗
NASA NTRS1979

Space shuttle orbiter trimmed center-of-gravity extension study. Volume 3: Impact of retrofits for center-of-gravity extension on orbiter thermal-protection system

Heat transfer studies were conducted at Mach 10.3 on space shuttle orbiter models with the S-2 fillet and C-4 canard retrofit moldlines which were generated in aerodynamic and system design studies to increase the allowable c.g. range of the orbiter. Areas of orbiter most strongly affected were the sides where a shear layer which separated along the wing leading edge impinged. Analytical studies of the heating effect on the thermal-protection system were made which indicated that scar weight on the orbiter sides due to allowances for retrofits of the S-2 fillet and C-4 canard is small (less than about 90 kg (200 lbs) in comparison to the total weight of the retrofit).

Dunavant, J. C.↗
NASA NTRS1980

Comparison of elastic and elastic-plastic structural analyses for cooled turbine blade airfoils

Elastic plastic stress strain states in cooled turbine blade airfoils were calculated by three methods for the initial takeoff transient of an advanced technology aircraft engine. The three analytical methods compared were a three dimensional elastic plastic, finite element analysis, a three dimensional, elastic, finite element analysis, and a one dimensional, elastic plastic, beam theory analysis. Structural analyses were performed for eight cases involving different combinations of mechanical and thermal loading on impingement cooled airfoils with and without leading edge film cooling holes. The von Mises effective total strains at maximum takeoff computed from the elastic and elastic plastic finite element analyses agreed with 9 percent for rotating airfoils and 28 percent for stationary airfoils with the elastic results on the conservative side.

Kaufman, A.↗
NASA NTRS1981

A 100 microsec, reliable, 10 Hz pulsed supersonic molecular beam source

A 10-Hz repetition rate, 100-microsec duration, reliable pulsed supersonic molecular beam source is described. Mechanical and electrical design of the pulsed valve are given in detail. Characteristics of the supersonic expansion obtained using coherent anti-Stokes Raman spectroscopy in acetylene are presented. They include pulse shape, gas rotational and translational cooling as a function of distance from the nozzle, clustering effects, and shock heating at the leading edge of the pulse.

Byer, R. L.↗
NASA NTRS1981

Airframe effects on top-mounted inlet systems for VSTOL fighter aircraft

Inlet flow-field and compressor-face performance data were obtained for a 0.095-scale model of a VSTOL fighter-attack aircraft configuration with twin top-mounted inlets. Tests were conducted at Mach numbers from 0.6 to 2.0 and at angles of attack and sideslip up to 27 deg and 12 deg, respectively. The effects of inlet location, wing leading-edge extension planform area, canopy-dorsal integration, and variable incidence canards were determined. The results show that distortion at the compressor face when maneuvering is relatively low (20% or less) at Mach numbers up to 0.9. However, at Mach numbers of 1.2 and above, maneuverability may be restricted because of high distortion or low pressure recovery (80% or less) or both.

Smeltzer, D. B.↗
NASA NTRS1983

Observational evidence of Z and L-O mode waves as the origin of auroral kilometric radiation from the Jikiken (EXOS-B) satellite

The present investigation has the objective to present new information on the polarization of the auroral kilometric radiation detected by the Jikiken (EXOS-B) satellite. On September 16, 1978, the satellite had been launched into an orbit with altitudes of the initial apogee and perigee of 30,050 km and 250 km, respectively, and an inclination of -31 deg. This orbit provides the conditions for suitable observations of the spectra of auroral kilometric radiation (AKR) in the proximity of the source regions. A study has been conducted of the discovered Z mode waves. These waves are found to be refracted to a nearly perpendicular direction of propagation with respect to the magnetic field vector within a very short distance of the source position. AKR spectra have been observed at positions where the ambient plasma defines a lower edge of the spectra by the cutoff effects of the waves propagating in the local plasma.

Oya, H.↗
NASA NTRS1984

Sharp edges in solar microwave spectra - Neutral current sheets or cyclotron lines?

Two solar active regions have been mapped using the VLA at three closely spaced frequencies (4496, 4716, and 4996 MHz) in an attempt to determine the origin of the steep spectra (index gamma equal to about -5 to -8) sometimes observed with large single telescopes. One of the regions observed indeed shows an anomalously large slope (gamma equal to about -6) compared to the usual (gamma equal to about -2 to -2.5). The other region shows a similar slope (gamma equal to about -5) but with a larger range of statistical error. Two possible explanations for such steep edges in solar spectra are (1) transmission effects of neutral current sheets, and (2) the appearance of cyclotron lines. The internal evidence of the microwave maps and simultaneous optical observations favor an explanation in terms of cyclotron lines.

Schmahl, E. J.↗
NASA NTRS1985

An improved viscid/inviscid interaction procedure for transonic flow over airfoils

A new interacting boundary layer approach for computing the viscous transonic flow over airfoils is described. The theory includes a complete treatment of viscous interaction effects induced by the wake and accounts for normal pressure gradient effects across the boundary layer near trailing edges. The method is based on systematic expansions of the full Reynolds equation of turbulent flow in the limit of Reynolds numbers, Reynolds infinity. Procedures are developed for incorporating the local trailing edge solution into the numerical solution of the coupled full potential and integral boundary layer equations. Although the theory is strictly applicable to airfoils with cusped or nearly cusped trailing edges and to turbulent boundary layers that remain fully attached to the airfoil surface, the method was successfully applied to more general airfoils and to flows with small separation zones. Comparisons of theoretical solutions with wind tunnel data indicate the present method can accurately predict the section characteristics of airfoils including the absolute levels of drag.

Melnik, R. E.↗
NASA NTRS1987

Top-mounted inlet performance for a V/STOL fighter/attack aircraft configuration

Inlet flow-field and compressor-face performance data were obtained for a 0.095-scale model of vertical/short take-off landing (V/STOL) fighter/attack aircraft configuration with twin top-mounted inlets. Tests were conducted at Mach numbers from 0.6 to 2.0 and angles of attack and sideslip up to 27 deg. and 12 deg., respectively. Reynolds number was held constant at 9.8 x 10 to the 6th power per meter. The effects of inlet location, wing leading-edge extension (LEX) planform area, canopy-dorsal integration, variable incidence canards, and wing leading- and trailing-edge flap deflections were determined. The results show that at Mach numbers up to 0.9, distortion is relatively low (20% or less) at all angles of attack and sideslip. However, at Mach numbers of 1.2 and above, operation may be restricted because of either high distortion or low pressure recovery (80% or less), or both. These difficulties may be overcome with alterations to the LEX/canopy/body juncture.

Smeltzer, Donald B.↗
NASA NTRS1986

Ultraviolet observations of Be stars. II - Superionization in Be stars of different spectral types

The results of an investigation of the dependence of the strength/presence of lines from superionized species (N V, C IV, Si IV) on spectral type and v sin i in the ultraviolet spectra of Be stars are presented. No evidence is found for N V in stars later than B2; this apparent absence may, however, simply reflect problems with the IUE reduction procedure. The C IV and Si IV lines pervade the ultraviolet spectra of all B subtypes, with a trend toward increasing strength with increasing effective temperature. A similar trend in the 'edge velocity' of the feature with spectral type is found. The data also suggest a possible trend toward the presence of stronger C IV and a higher edge velocity in stars with larger values of v sin i. The observed temporal variability in N V, C IV, and Si IV in some Be stars is discussed.

Marlborough, J. M.↗
NASA NTRS1986

Boundary layer transition

The boundary layer stability, its active control by sound and surface heating and the effect of curvature are studied numerically and experimentally for subsonic flow. In addition, the experimental and flight test data are correlated using the stability theory for supersonic Mach numbers. Active transition fixing and feedback control of boundary layer by sound interactions are experimentally investigated at low speed over an airfoil. Numerical simulation of active control by surface heating and cooling in air shows that by appropriate phase adjustment a reduction in the level of perturbation can be obtained. This simulation is based on the solution of two-dimensional compressible Navier-Stokes equations for a flat plate. Goertler vortices are studied experimentally on an airfoil in the Low Turbulence Pressure Tunnel (LTPT). The flow pattern was visualized using the sublimating chemical technique and data were obtained using a three component laser velocimeter. The effect of curvature on swept leading-edge stability on a cylinder was numerically studied. The results suggest that transition is dominated by traveling disturbance waves and that the waves with the greatest total amplification has an amplitude ratio of e sup 11. Experimental data from the quiet supersonic tunnel and flight tests are analyzed using linear compressible stability theory.

Maestrello, L.↗
NASA NTRS1988

Experiments and code validation for juncture flows

The turbulent flow around a juncture formed by an unswept wing and a flat plate has been experimentally studied, and the effectiveness of modifications near the wing leading edge in controlling the juncture flow field has been evaluated. The results are compared with numerical solutions of the incompressible Reynolds-averaged Navier-Stokes equations. The Baldwin-Lomax turbulence model is used in the computations. The numerical code is very time efficient, and it predicts the flow behavior well, including the detection of leading-edge vortex formation. It tends to over-predict the boundary layer thickness and the location of the vortex. Both the experiment and computations indicate that the leading edge flow separation is eliminated by the use of a leading-edge fillet designed in this study, resulting in drag reduction.

Kubendran, L. R.↗
NASA NTRS1989

Upwind Navier-Stokes solutions for leading-edge vortex flows

An incompressible Navier-Stokes solver using an upwind finite-difference algorithm is employed to investigate low-speed, three-dimensional, laminar, leading-edge vortex flows over three round-edged low-aspect-ratio wings. The effects of grid density, Reynolds number, and wing planform on the flowfield structures and integral values are studied. Computed results show good qualitative and quantitative agreement with the available experimental data.

Hsu, C.-H.↗
NASA NTRS1989

Large scale advanced propeller blade pressure distributions - Prediction and data

Two Euler analysis techniques, finite difference and finite volume, are employed to predict the blade surface pressure distributions of a large scale advanced propeller. The predicted pressure distributions are compared with wind tunnel data. Both techniques produced blade pressure distributions which are in fairly good agreement with the data over the range of test Mach numbers of 0.2 to 0.78. However, the numerical simulations fail to predict correctly the measured pressure distributions for the low Mach number, high power case which seem to have a leading edge vortex. A discussion of the compressibility effects is also presented.

Nallasamy, M.↗
NASA NTRS1990

Simulation of leading-edge vortex flows

An implicit upwind-relaxation finite-difference algorithm solving the incompressible Navier-Stokes equations is employed to simulate low-speed, three-dimensional, laminar, leading-edge vortex flows over three round-edged low-aspect-ratio wings. The effects of grid density, angle of attack, Reynolds number, and wing planform on the flowfield structures and integral values are studied. Computed results are presented and compared with experimental data.

Hsu, C.-H.↗
NASA NTRS1991

Forebody tangential blowing for control at high angles of attack

A feasibility study to determine if the use of tangential leading edge blowing over the forebody could produce effective and practical control of the F-18 HARV aircraft at high angles of attack was conducted. A simplified model of the F-18 configuration using a vortex-lattice model was developed to obtain a better understanding of basic aerodynamic coupling effects and the influence of forebody circulation on lifting surface behavior. The effect of tangential blowing was estimated using existing wind tunnel data on normal forebody blowing and analytical studies of tangential blowing over conical forebodies. Incorporation of forebody blowing into the flight control system was investigated by adding this additional yaw control and sideforce generating actuator into the existing F-18 HARV simulation model. A control law was synthesized using LQG design methods that would schedule blowing rates as a function of vehicle sideslip, angle of attack, and roll and yaw rates.

Kroo, I.↗
NASA NTRS1992

Light-trap design using multiple reflections and solid-angle attenuation - Application to a spaceborne electron spectrometer

The design and performance of a new light trap for a spaceborne electron spectrometer are described. The light trap has a measured photon-rejection ratio of 2 x 10 exp -11, allowing only one in 5 x 10 exp 10 incident photons to reach the sensitive area of the instrument. This rejection is more than sufficient because the ambient UV in earth orbit requires a rejection no better than 10 exp -8 to maintain the photon interference to less than 10 count/s. The light trap uses triple reflections to keep most of the light passing through the entrance slit away from the sensitive area of the spectrometer. It is shown that the average reflectance of all the internal surfaces must be less than 0.006, which is consistent with the data on the black coating applied to all surfaces. The analysis makes it possible to compare the photon contributions of each of the internal reflecting areas and to estimate the effective scattering width of the metallic electrode edge.

Herrero, Federico A.↗
NASA NTRS1923

Lift and drag effects of wing-tip rake

This report deals with a description and report of tests carried out at the Washington Navy Yard on models of the RAF-6, albatross and Slone airfoils to determine the effectiveness of the conventional wing-trailing edge being always longer than the leading edge. The results are compared with the values computed by standard formulae in use at the time the tests were conducted.

Zahm, A F↗