SEARCH · Engineering Papers

Results for “droplets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Simulations of the effects of water vapor, cloud liquid water, and ice on AMSU moisture channel brightness temperatures

Radiative transfer simulations are performed to determine how water vapor and nonprecipitating cloud liquid water and ice particles within typical midlatitude atmospheres affect brightness temperatures T(sub B)'s of moisture sounding channels used in the Advanced Microwave Sounding Unit (AMSU) and AMSU-like instruments. The purpose is to promote a general understanding of passive top-of-atmosphere T(sub B)'s for window frequencies at 23.8, 89.0, and 157.0 GHz, and water vapor frequencies at 176.31, 180.31, and 182.31 GHz by documenting specific examples. This is accomplished through detailed analyses of T(sub B)'s for idealized atmospheres, mostly representing temperate conditions over land. Cloud effects are considered in terms of five basic properties: droplet size distribution, phase, liquid or ice water content, altitude, and thickness. Effects on T(sub B) of changing surface emissivity also are addressed. The brightness temperature contribution functions are presented as an aid to physically interpreting AMSU T(sub B)'s. Both liquid and ice clouds impact the T(sub B)'s in a variety of ways. The T(sub B)'s at 23.8 and 89 GHz are more strongly affected by altostratus liquid clouds than by cirrus clouds for equivalent water paths. In contrast, channels near 157 and 183 GHz are more strongly affected by ice clouds. Higher clouds have a greater impact on 157- and 183-GHz T(sub B)'s than do lower clouds. Clouds depress T(sub B)'s of the higher-frequency channels by suppressing, but not necessarily obscuring, radiance contributions from below. Thus, T(sub B)'s are less closely associated with cloud-top temperatures than are IR radiometric temperatures. Water vapor alone accounts for up to 89% of the total attenuation by a midtropospheric liquid cloud for channels near 183 GHz. The Rayleigh approximation is found to be adequate for typical droplet size distributions; however, Mie scattering effects from liquid droplets become important for droplet size distribution functions with modal radii greater than 20 micrometers near 157 and 183 GHz, and greater than 30-40 micrometers at 89 GHz. This is due mainly to the relatively small concentrations of droplets much larger than the mode radius. Orographic clouds and tropical cumuli have been observed to contain droplet size distributions with mode radii in the 30-40 micrometers range. Thus, as new instruments bridge the gap between microwave and infrared to frequencies even higher than 183 GHz, radiative transfer modelers are cautioned to explicitly address scattering characteristics of such clouds.

Muller, Bradley M.↗

NASA NTRS1995

High-pressure combustion of binary fuel sprays

The ultimate objective of this study is to obtain fundamental information relevant to combustion processes that occur in fuel sprays of practical interest at high pressures in internal combustion engines. Since practical fuels are multicomponent and derived from petroleum, the present work involves the model alkane mixture of n-heptane and n-hexadecane. Since burning droplets in sprays can interact with each other, the present work involves investigation of the effects of this interaction on flame shapes and droplet burning times. The small droplets in practical combustion chambers are not significantly influenced by buoyancy. Since such small droplets are difficult to study experimentally, the present work takes advantage of microgravity to lessen buoyancy and enable information about droplet interactions to be obtained by studying larger droplets. The results are intended to provide fundamental understanding that can be used in improving descriptions of practical spray combustion.

Mikami, Masato↗

NASA NTRS1998

Global Studies of the Sulfur Cycle Including the Influence of DMS and Fossil Fuel Sulfur on Climate and Climate Change

The indirect effect of anthropogenic aerosols, wherein aerosol particles are thought to increase cloud droplet concentrations and cloud lifetime, is the most uncertain component of climate forcing over the past 100 years. Here, for the first time, we use a mechanistic treatment of droplet nucleation and a prognostic treatment of the number of cloud droplets to study the indirect aerosol effect from changes in carbonaceous and sulfate aerosols. Cloud droplet nucleation is parameterized as a function of total aerosol number concentration, updraft velocity and a shape parameter, which takes into account the mechanism, of sulfate aerosol formation, while cloud droplet number depends on the nucleation as well as on droplet sinks. Whereas previous treatments have predicted annual average indirect effects between -1 and -2 W/sq m, we obtain an indirect aerosol effect between -0.14 W/sq m and -0.42 W/sq m in the global mean.

Penner, Joyce E.↗

NASA NTRS2002

Caustics and Caustic-Interference in Measurements of Contact Angle and Flow Visualization Through Laser Shadowgraphy

As one of the basic elements of the shadowgraphy optical system, the image of the far field from the droplet implicates plentiful information on the droplet profile. An analysis of caustics by wave theory shows that a droplet with a cylindrically symmetric Gaussian-hill-type profile produces a circular directional caustic in far field, which arises from the singularities (inflection line on the surface). The sessile liquid droplets, which profiles are restricted by surface tension, usually have a 'protruding foot' where the surface inflects. Simple geometrical optics indicates that the circular caustic stemming from the surface inflection at the protruding-foot takes the shape of the outmost ring on the image of the far field. It is the diameter of the outmost ring that is used as one of the key parameters in the measurements of contact angle through the laser shadowgraphic method. Different surface characteristics of the droplets produce different type of caustics, and therefore, the shape of the caustics can be used to determine the surface property of the sessile droplets. The present paper describes the measurement method of contact angIe using the circular caustics and the estimation of the protruding-foot height through the caustic interference.

Chao, David F.↗

NASA NTRS2003

Impact of Aerosols and Atmospheric Thermodynamics on Cloud Properties within the Climate System

A combination of cloud-top and columnar droplet sizes derived from the multi Tropical Rainfall Measurement Mission (TRMM) sensors reveals the sensitivity of the aerosols effect on cloud-precipitation process due to environmental vertical thermodynamic structure. First, the magnitude of aerosol indirect effect could be larger with the analysis of columnar droplet sizes than that derived from the cloud-top droplet sizes, since column-droplet size can account for the broader droplet spectra in the cloud layers. Second, a combination of cloud- top and columnar droplet sizes reveals that the warm rain process is prevented regardless of the aerosols concentration under a high static stability such as when a strong temperature inversion exists, while a high aerosol concentration suppresses the warm rain formulation under a low static stability.

Matsui, Toshihisa↗

NASA NTRS2003

Limits to the Indirect Aerosol Forcing in Stratocumulus

The indirect radiative forcing of aerosols is poorly constrained by the observational data underlying the simple cloud parameterizations in GCMs. signal of cloud response to increased aerosol concentrations from meteorological noise. Recent satellite observations indicate a significant decrease of cloud water in ship tracks, in contrast to an ensemble of in situ measurements showing no average change in cloud water relative to the surrounding clouds. Both results contradict the expectation of cloud water increasing in polluted clouds. We find through large-eddy simulations of stratocumulus that the trend in the satellite data is likely an artifact of sampling only overcast clouds. The simulations instead show cloud cover increasing with droplet concentrations. The simulations also show that increases in cloud water from suppressing drizzle by increased droplet concentrations are favored at night or at extremely low droplet concentrations. At typical droplet concentrations we find that the Twomey effect on cloud albedo is amplified very little by the secondary indirect effect of drizzle suppression, largely because the absorption of solar radiation by cloud water reduces boundary-layer mixing in the daytime and thereby restricts any possible increase in cloud water from drizzle suppression. The cloud and boundary layer respond to radiative heating variations on a time scale of hours, and on longer time scales respond to imbalances between large-scale horizontal advection and the entrainment of inversion air. We analyze the co-varying response of cloud water, cloud thickness, width of droplet size distributions, and dispersion of the optical depth, as well as the overall response of cloud albedo, to changes in droplet concentrations. We also dissect the underlying physical mechanisms through sensitivity studies. Ship tracks represent an ideal natural laboratory to extricate the

Ackerman, Andrew↗

NASA NTRS2005

Anvil Glaciation in a Deep Cumulus Updraught over Florida Simulated with the Explicit Microphysics Model. I: Impact of Various Nucleation Processes

Simulations of a cumulonimbus cloud observed in the Cirrus regional Study of Tropical Anvils and Cirrus Layers-Florida Area Cirrus Experiment (CRYSTAL-FACE) with an advanced version of the Explicit Microphysics Model (EMM) are presented. The EMM has size-resolved aerosols and predicts the time evolution of sizes, bulk densities and axial ratios of ice particles. Observations by multiple aircraft in the troposphere provide inputs to the model, including observations of the ice nuclei and of the entire size distribution of condensation nuclei. Homogeneous droplet freezing is found to be the source of almost all of the ice crystals in the anvil updraught of this particular model cloud. Most of the simulated droplets that freeze to form anvil crystals appear to be nucleated by activation of aerosols far above cloud base in the interior of the cloud ("secondary" or "in cloud" droplet nucleation). This is partly because primary droplets formed at cloud base are invariably depleted by accretion before they can reach the anvil base in the updraught, which promotes an increase with height of the average supersaturation in the updraught aloft. More than half of these aerosols, activated far above cloud base, are entrained into the updraught of this model cloud from the lateral environment above about 5 km above mean sea level. This confirms the importance of remote sources of atmospheric aerosol for anvil glaciation. Other nucleation processes impinge indirectly upon the anvil glaciation by modifying the concentration of supercooled droplets in the upper levels of the mixed-phase region. For instance, the warm-rain process produces a massive indirect impact on the anvil crystal concentration, because it determines the mass of precipitation forming in the updraught. It competes with homogeneous freezing as a sink for cloud droplets. The effects from turbulent enhancement of the warm-rain process and from the nucleation processes on the anvil ice properties are assessed.

Phillips, Vaughan T. J.↗

NASA NTRS2011

Method and Apparatus for Forming Nanodroplets

This innovation uses partially miscible fluids to form nano- and microdroplets in a microfluidic droplet generator system. Droplet generators fabricated in PDMS (polydimethylsiloxane) are currently being used to fabricate engineered nanoparticles and microparticles. These droplet generators were first demonstrated in a T-junction configuration, followed by a cross-flow configuration. All of these generating devices have used immiscible fluids, such as oil and water. This immiscible fluid system can produce mono-dispersed distributions of droplets and articles with sizes ranging from a few hundred nanometers to a few hundred microns. For applications such as drug delivery, the ability to encapsulate aqueous solutions of drugs within particles formed from the droplets is desirable. Of particular interest are non-polar solvents that can dissolve lipids for the formation of liposomes in the droplet generators. Such fluids include ether, cyclohexane, butanol, and ethyl acetate. Ethyl acetate is of particular interest for two reasons. It is relatively nontoxic and it is formed from ether and acetic acid, and maybe broken down into its constituents at relatively low concentrations.

Ackley, Donald↗

NASA NTRS2015

CFD Modeling of the Multipurpose Hydrogen Test Bed (MHTB) Self-Pressurization and Spray Bar Mixing Experiments in Normal Gravity: Effect of the Accommodation Coefficient on the Tank Pressure

A CFD model for simulating the self-pressurization of a large scale liquid hydrogen storage tank is utilized in this paper to model the MHTB self-pressurization experiment. The kinetics-based Schrage equation is used to account for the evaporative and condensi ng interfacial mass flows in this model. The effect of the accommodation coefficient for calculating the interfacial mass transfer rate on the tank pressure during tank selfpressurization is studied. The values of the accommodation coefficient which were considered in this study vary from 1.0e-3 to 1.0e-1 for the explicit VOF model and from 1.0e-4 to 1.0e-3 for the implicit VOF model. The ullage pressure evolutions are compared against experimental data. A CFD model for controlling pressure in cryogenic storage tanks by spraying cold liquid into the ullage is also presented. The Euler-Lagrange approach is utilized for tracking the spray droplets and for modeling the interaction between the droplets and the continuous phase (ullage). The spray model is coupled with the VOF model by performing particle tracking in the ullage, removing particles from the ullage when they reach the interface, and then adding their contributions to the liquid. Droplet-ullage heat and mass transfer are modeled. The flow, temperature, and interfacial mass flux, as well as droplets trajectories, size distribution and temperatures predicted by the model are presented. The ul lage pressure and vapor temperature evolutions are compared with experimental data obtained from the MHTB spray bar mixing experiment. The effect of the accommodation coefficient for calculating the interfacial and droplet mass transfer rates on the tank pressure during mixing of the vapor using spray is studied. The values used for the accommodation coefficient at the interface vary from 1.0e-5 to 1.0e-2. The droplet accommodation coefficient values vary from 2.0e-6 to 1.0e-4.

cryogenic fluid storage↗

DOE OSTI2021

Analysis of Electro-static Assisted Air Dehumidification

The removal of water vapor from the air to reduce relative humidity is a well-known indoor environmental comfort requirement. Common dehumidification approaches require a substantial amount of energy and usually involve the cooling of atmospheric humid air below its dew point or the use of absorbent/adsorbent materials to extract water vapor out of the air. More recently, researchers investigated the effect of electrostatic forces for enhancing water vapor condensation. However, the studies are limited, and there is a lack of correlations that can predict the dehumidification rate. Also, the findings from the literature focused mainly on small flow rates on the order of one to two cfm. Electrically-enhanced condensation consists of the use of highly charged particles, preferably highly charged water droplets, that attract polar water vapor molecules to their surfaces and promote condensation, a phenomenon known as dielectrophoresis. An effect of the electric charge is the reduction of the vapor pressure on the droplets' surface with respect to the saturated pressure predicted by the Kelvin equation. Consequently, the equilibrium between evaporation and condensation is shifted towards condensation. Following the application of the modified Kelvin-Thomson theory, we developed a preliminary physics-based model to predict an effective size range of the charged droplets for optimal dehumidification. The range resulted in about 2 to 4 μm in diameter, under few simplifying assumptions. The effect of the size and the charge of the electrosprayed droplets on the overall dehumidification rate was briefly discussed. The use of electrosprays to produce small but highly charged droplets was broadly discussed in this paper. The cone-jet mode was identified as the most suitable electrospray operational mode, and it generated droplets of small size and high electrical charge. The cone-jet stability was also analyzed in detail. The preliminary data of the present work and the model results indicated that several electrospray heads were required to achieve a 5% dehumidification rate for airflow rates of about 5 cfm.

Morcelli, Stefano↗

DOE OSTI2021

Analysis of New Data of Electro-static Assisted Air Dehumidification Processes

The removal of water vapor from the air to reduce relative humidity is a well-known indoor environmental comfort requirement. Common dehumidification approaches require a substantial amount of energy and usually involve the cooling of atmospheric humid air below its dew point or the use of absorbent/adsorbent materials to extract water vapor out of the air. More recently, researchers investigated the effect of electrostatic forces for enhancing water vapor condensation. However, the studies are limited, and there is a lack of correlations that can predict the dehumidification rate. Also, the findings from the literature focused mainly on small flow rates on the order of one to two cfm. Electrically-enhanced condensation consists of the use of highly charged particles, preferably highly charged water droplets, that attract polar water vapor molecules to their surfaces and promote condensation, a phenomenon known as dielectrophoresis. An effect of the electric charge is the reduction of the vapor pressure on the droplets' surface with respect to the saturated pressure predicted by the Kelvin equation. Consequently, the equilibrium between evaporation and condensation is shifted towards condensation. Following the application of the modified Kelvin-Thomson theory, we developed a preliminary physics-based model to predict an effective size range of the charged droplets for optimal dehumidification. The range resulted in about 2 to 4 m in diameter, under few simplifying assumptions. The effect of the size and the charge of the electrosprayed droplets on the overall dehumidification rate was briefly discussed. The use of electrosprays to produce small but highly charged droplets was broadly discussed in this paper. The cone-jet mode was identified as the most suitable electrospray operational mode, and it generated droplets of small size and high electrical charge. The cone-jet stability was also analyzed in detail. The preliminary data of the present work and the model results indicated that several electrospray heads were required to achieve a 5% dehumidification rate for airflow rates of about 5 cfm.

Morcelli, Stefano↗

DOE OSTI2020

Simulating combustion of a seven-component surrogate for a gasoline/ethanol blend including soot formation and comparison with experiments

Combustion of a seven-component surrogate for a research grade 87 octane gasoline mixed with 10% ethanol is investigated experimentally and numerically from the perspective of an isolated droplet burning under conditions that promote one-dimensional gas transport. The numerical analysis included a kinetic mechanism comprised of 398 species and 24,814 reactions and a soot model that accounted for nucleation, surface growth, coalescence/aggregation of soot particles, and luminous flame radiation. Measurements of droplet and flame diameters were made for an initial droplet diameter (D o ) of approximately 0.63 mm. The simulations agreed well with the measurements including the location of the soot shell. Preferential vaporization was revealed by simulations of the liquid concentrations in the droplet. Predicted peak soot volume fractions coincided with temperatures between 1300 K and 1400 K as a soot inception temperature. Simulations were also carried out for D o between 0.25 mm and 5 mm to explore the effect of radiation and D o on burning. Below 0.25 mm radiation was negligible and burning rates and flame temperatures converged to a single value. Increasing D o up to 1.8 mm lowered the burning rate with luminous radiation having a strong effect. When radiation was entirely removed from the model the burning rate was nearly constant. Above D o = 2 mm droplets extinguished almost immediately after ignition. The flame temperature decreased with increasing D o while it increased when radiation was omitted. As a result, the simulations show that soot precursors including polyaromatic hydrocarbons were concentrated around the soot shell.

42 ENGINEERING↗

DOE OSTI2023

Combustion of petroleum-based transportation fuels and their blends with biofuels: a new approach for developing surrogates and understanding the effects of blending

Accurate and versatile reaction mechanisms are necessary to simulate combustion of transportation fuels blended with biofuels for improving fuel efficiency, reducing fuel consumption and mitigating the formation and emissions of combustion products harmful to the atmosphere. This project involved a combined effort of simulation and experimentation of liquid fuel burning using a combustion configuration amenable to numerical modeling with a level of detail not previously achieved for blends of biofuels with gasoline certification and surrogate fuels. The configuration of an isolated droplet burning under conditions where gas transport arises solely from fuel evaporation was selected as the platform for experiments and numerical modeling. The spherical symmetry and one-dimensional gas transport that results enabled simulating the droplet burning process with an precedented level of detail. Processes associated with unsteady gas and liquid transport, formation of particulate and gaseous products, radiation, multicomponent phase equilibrium at the droplet surface and moving boundary effects from droplet evaporation, were incorporated in a single numerical framework. The numerical model was based on the open source code OPENSmoke++ (OS) adapted to incorporate the effects noted above. In addition to simulation, an experimental design was developed for the isolated droplet configuration to acquire the data needed for validating the numerical model. Several broad accomplishments of the project were the following: demonstrating generally excellent agreement between measured and simulated combustion parameters for the fuel blends examined that included mixtures of heptane and isobutanol as a model system, and surrogates comprised of up to seven miscible components mixed with ethanol or isobutanol as representative biofuel additives; using a new approach to validate reaction mechanisms of biofuel blends which incorporated fuel evaporation into the process along with developing an experimental design for acquiring data to compare with simulations; and showing that a wealth of information could be obtained on the combustion physics of biofuels from experiments requiring volumes on the order of only nanoliters at a time thus opening the way to evaluating biofuels synthesized by new processes early in development.

02 PETROLEUM↗

NASA NTRS2016

Optics of Water Microdroplets with Soot Inclusions: Exact Versus Approximate Results

We use the recently generalized version of the multi-sphere superposition T-matrix method (STMM) to compute the scattering and absorption properties of microscopic water droplets contaminated by black carbon. The soot material is assumed to be randomly distributed throughout the droplet interior in the form of numerous small spherical inclusions. Our numerically-exact STMM results are compared with approximate ones obtained using the Maxwell-Garnett effective-medium approximation (MGA) and the Monte Carlo ray-tracing approximation (MCRTA). We show that the popular MGA can be used to calculate the droplet optical cross sections, single-scattering albedo, and asymmetry parameter provided that the soot inclusions are quasi-uniformly distributed throughout the droplet interior, but can fail in computations of the elements of the scattering matrix depending on the volume fraction of soot inclusions. The integral radiative characteristics computed with the MCRTA can deviate more significantly from their exact STMM counterparts, while accurate MCRTA computations of the phase function require droplet size parameters substantially exceeding 60.

cloud droplets↗

DOE OSTI2026

Haze–cloud correlations mediated by supersaturation fluctuations

Atmospheric aerosol particles that contain water-soluble components can absorb water vapor in humid environments and form either haze particles or cloud droplets, depending on supersaturation conditions. Laboratory and in situ measurements have shown that haze particles and cloud droplets often coexist and compete for available water vapor in shallow clouds and fogs, especially under polluted conditions. It is expected that more aerosol particles can form more haze particles and cloud droplets, so that the haze and cloud number concentrations are positively correlated. However, recent large-eddy simulations show that haze and cloud number concentration can be negatively correlated under extremely polluted conditions. Haze–cloud interactions across different environmental settings remain poorly understood. In this study, experiments in a convection cloud chamber with the same aerosol injection rate show that, as supersaturation forcing increases (i.e., changing from polluted to clean conditions), the covariance between haze and cloud droplet number concentration changes from negative to positive and finally to zero. Large-eddy simulations (LES) of the cloud chamber with a fixed supersaturation forcing but varying aerosol injection rates show a similar result for the haze–cloud correlation: near zero in clean, mean-supersaturation-dominated activation conditions; positive in moderate, supersaturation-fluctuation-influenced activation conditions; and negative in polluted, supersaturation-fluctuation-dominated activation conditions. A theoretical covariance framework was developed to interpret this behavior based on the relative magnitude and signs of the correlations between supersaturation and the populations of haze and cloud droplets. Significantly, experiments, LES, and theory all yield the same three-regime behavior for the sign of the haze–cloud covariance. Furthermore, our results show that the haze–cloud covariance remains robust and easily measurable, thereby providing a useful metric for regime identification in the atmosphere, improving regime-aware parameterizations, and informing aerosol interventions such as fog dispersion, rainfall enhancement, and albedo modification.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Observed and Bin Model Simulated Evolution of Drop Size Distributions in High-Based Cumulus Congestus Over the United Arab Emirates

This study examines microphysical processes in developing high-based cumulus congestus over the United Arab Emirates using aircraft observations and a large-eddy-simulation model with bin microphysics. A notable feature of this case is the lack of mm-sized drops despite having a liquid cloud layer >3.5 km deep, contrasting with copious large drops observed in maritime tropical cumulus congestus having a similar vertical extent. Modeled drop size distributions are similar to observations at various temperatures between 9.5 and –12°C, including the lack of mm-sized drops. Cloud dilution leads to low-to-moderate liquid water contents (~0.5–1.5 g m –3 ) in most of the cloud core, several times smaller than adiabatic values. Dilution is enhanced in the inflowing branch of the toroidal circulations associated with individual cloud thermals, which are favored regions for secondary droplet activation (activation above cloud base). Secondary activation in general contributes substantially to the droplet population. Turning it off leads to a sharp decrease in droplet concentration and increase in mean size aloft, but does little to increase rain drop production. Warm rain generation (or lack thereof) in this case is therefore determined more by the sub-cloud aerosol and the cloud base droplet size distribution (DSD) than DSD evolution aloft from secondary droplet activation. Decreasing the aerosol concentration by a factor of 10 greatly increases production of large drops via collision-coalescence. Thus, despite its high base (low temperatures) and substantial dilution, the simulated cloud is thermodynamically and dynamically capable of rapidly producing copious mm-sized drops from collision-coalescence under pristine aerosol conditions.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

An Intercomparison of Large‐Eddy Simulations of a Convection Cloud Chamber Using Haze‐Capable Bin and Lagrangian Cloud Microphysics Schemes

Abstract Recent in situ observations show that haze particles exist in a convection cloud chamber. The microphysics schemes previously used for large‐eddy simulations of the cloud chamber could not fully resolve haze particles and the associated processes, including their activation and deactivation. Specifically, cloud droplet activation was modeled based on Twomey‐type parameterizations, wherein cloud droplets were formed when a critical supersaturation for the available cloud condensation nuclei (CCN) was exceeded and haze particles were not explicitly resolved. Here, we develop and adapt haze‐capable bin and Lagrangian microphysics schemes to properly resolve the activation and deactivation processes. Results are compared with the Twomey‐type CCN‐based bin microphysics scheme in which haze particles are not fully resolved. We find that results from the haze‐capable bin microphysics scheme agree well with those from the Lagrangian microphysics scheme. However, both schemes significantly differ from those from a CCN‐based bin microphysics scheme unless CCN recycling is considered. Haze particles from the recycling of deactivated cloud droplets can strongly enhance cloud droplet number concentration due to a positive feedback in haze‐cloud interactions in the cloud chamber. Haze particle size distributions are more realistic when considering solute and curvature effects that enable representing the complete physics of the activation process. Our study suggests that haze particles and their interactions with cloud droplets may have a strong impact on cloud properties when supersaturation fluctuations are comparable to mean supersaturation, as is the case in the cloud chamber and likely is the case in the atmosphere, especially in polluted conditions.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Reduced‐Order Modeling for Linearized Representations of Microphysical Process Rates

Abstract Representing cloud microphysical processes in large scale atmospheric models is challenging because many processes depend on the details of the droplet size distribution (DSD, the spectrum of droplets with different sizes in a cloud). While full or partial statistical moments of droplet size distributions are the typical variables used in bulk models, prognostic moments are limited in their ability to represent microphysical processes across the range of conditions experienced in the atmosphere. Microphysical parameterizations employing prognostic moments are known to suffer from structural uncertainty in their representations of inherently higher dimensional cloud processes, which limit model fidelity and lead to forecasting errors. Here we investigate how data‐driven reduced‐order modeling can be used to learn predictors for microphysical process rates in bulk microphysics schemes in an unsupervised manner from higher dimensional bin distributions. Using simulations characteristic of marine stratiform clouds, we simultaneously learn lower dimensional representations of droplet size distributions and predict the evolution of the microphysical state of the system. Droplet collision‐coalescence, the main process for generating warm rain, is estimated to have an intrinsic dimension of three. This intrinsic dimension provides a lower limit on the number of degrees of freedom needed to accurately represent collision‐coalescence in models. We demonstrate how deep learning based reduced‐order modeling can be used to discover intrinsic coordinates describing the microphysical state of the system, where process rates such as collision‐coalescence are globally linearized. These implicitly learned representations of the DSD retain more information about the DSD than typical moment‐based representations.

54 ENVIRONMENTAL SCIENCES↗