Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference in differences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Dynamic Magnetic Hysteresis Behaviors in a Mixed Spin (3/2, 2) Bilayer System with Different Crystal-Field Interactions

Dynamic magnetic hysteresis (DMH) behaviors of the mixed spin-3/2 and spin-2 Ising bilayer system with different crystal-field interactions on a two-layer square lattice is studied by the use of dynamic mean field calculations based on the Glauber-type stochastic. The hysteresis loops are obtained for different reduced temperatures (T), magnetic field amplitudes (h), frequencies (w) and interlayer coupling constants (J{sub 3}). Influences of the T, h, w and J{sub 3} on the DMH properties are investigated. We also study the temperature, frequency and interlayer coupling interaction dependence of the coercive field and remanent magnetization. We compare our results with some theoretical and experimental works and observe a quantitatively good agreement with some theoretical and experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of FeSe Superconducting Tapes with Different Sheath Materials and Precursor Powders

FeSe superconducting tapes with different sheath materials of Nb/Cu composite, Ag, and Fe have been fabricated with a traditional in situ powder-in-tube (PIT) process, respectively. With the same cold working process and heat treatment, the influences of different sheath materials on the phase composition and microstructures of FeSe filaments have been analyzed. Due to the reaction between Nb-Se and Ag-Se, Nb{sub 2}Se and Ag{sub 2}Se particles can be clearly observed embedded in the filaments. Therefore, it is necessary to introduce a new method for the fabrication of Ag or Nb sheath FeSe wires in order to avoid the introduction of metal Fe in magnet system during practical applications. Based on our previous study, a high-energy ball milling process has been performed to achieve precursor powders with amorphous FeSe binary compound instead of elemental Se. The formation of Ag-Se compounds has been successfully avoided and the superconducting tapes with high superconducting FeSe critical temperature of 9.0 K have been obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Comparative Study on Microstructures, Magnetic Features and Morphologies of Ternary Fe–Co–Ni Alloy Thin Films Electrochemically Fabricated at Different Deposition Potentials

Electrochemically fabricated ternary Fe–Co–Ni alloy thin films with different chemical compositions were obtained at different deposition potentials. An increase in the deposition potential increased the Ni content while it decreased the Co and Fe contents in the film structure. An anomalous co-deposition behaviour was also studied and the anomalous order of co-deposition was found to be Fe–Ni > Co–Ni > Fe–Co irrespective of deposition potential. Structural characterizations confirmed the presence of single face-centred cubic (fcc) phase structure with [111] preferred crystallographic orientation for all films. The size of the crystallites and the texture degree increased with increasing applied deposition potential. Smaller globular particles occurred on the surface structure of the film fabricated at higher deposition potentials compared to those grown at lower deposition potentials. A decrement detected in the coercive field with increasing applied deposition potential was related to the variations occurred in the chemical composition and the particle size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of Fluxgate Sensors for Different Applications from Geology to Medicine

In this study, we have shown that fluxgate sensors can be used for different application areas. Alternative sensor configurations have been developed for three different application areas. These are mainly rod- and ring-type fluxgate sensors. In the first study, a measurement system with the rod-type fluxgate sensor has been developed in order to monitor the local magnetic field distributions on a magnetic tape (e.g., credit card). With this system, the magnetic recording data on the credit card were measured and imaged successfully. The second and the third application areas, which are monitoring the influence of solar storms on the earth field and heartbeat analysis of mankind, were carried out by using a ring-core fluxgate sensor geometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Zn, Ga and Gd Doping on Structural and Magnetic Properties of Nanonickel Ferrite Prepared by Two Different Methods

Zn/Ga/Gd-substituted NiFe{sub 2}O{sub 4} was formed by solid state reaction and citrate methods. The influence of substitutions on phase formation, the strain, crystallize size, cations distribution and magnetic properties have been examined by X-ray diffraction, Mössbauer effect spectrometer, Fourier-transform infrared, and vibrating sample magnetometer. Zn/Ga/Gd substituted NiFe{sub 2}O{sub 4} samples prepared by solid state method showed that as gadolinium introduced into the system, a second phase was formed with a small percentage while samples prepared by citrate method exhibited a single phase. The distributions of different cations between different sites were determined by both Mössbauer effect spectroscopy, modified Bertaut and Rietveld analysis. Mössbauer technique at room temperature showed that samples synthesized by the ceramic method have a magnetic order while samples prepared by citrate method have a superparamagnetic nature. The canting angle between magnetic ions was increased by increased the amount of Zn in samples prepared by both methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Different Nano-sized MgO Addition on YBa{sub 2}Cu{sub 3}O{sub 7-δ} Superconductor

The effect of nanoparticle with different size on a superconductor is interesting because the size of the coherence length, penetration depth, and the magnetic flux in a superconductor is in the nanometer range. In this paper, we report the effects of different nano-sized MgO (20, 40, and 100 nm) addition on YBa{sub 2}Cu{sub 3}O{sub 7-δ}(MgO){sub x} for x = 0, 0.1, and 0.2 wt.%. X-ray diffraction patterns indicated a single YBa{sub 2}Cu{sub 3}O{sub 7} (YBCO) phase where the peaks were shifted to larger angles in the 20- and 40-nm MgO-added samples indicating induced stress of first order in the structure. The electrical resistance versus temperature was measured using the four-probe method. The transition temperature, T{sub c}, for the pure YBCO showed T{sub c} = 90 K and was suppressed to 78–80 K for the 20- and 40-nm MgO-added samples. AC susceptibility (χ = χ′ + iχ″) measurements showed a shift in the peak temperature, T{sub p}, of the imaginary susceptibility χ″ towards lower temperatures for 20-nm MgO-added samples but increased with larger MgO (100 nm). This work showed that smaller nano-sized MgO suppressed the superconducting properties of YBCO more compared with the larger MgO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

32 Channel × 40 Gb/s WDM optical communication system utilizing different configurations of hybrid fiber amplifier

In this paper, a simulation analysis of 40 Gb/s wavelength division multiplexing system of 32 channels is implemented through RZ modulation format by using a different hybrid fiber amplifier (HFA) configurations, namely, serial HFA, parallel HFA, and combined serial–parallel hybrid fiber amplifier (CSP-HFA). The performance of the proposed amplifiers is compared in terms of average gain level, average noise figure, flat gain bandwidth. In addition, quality factor, bit error rate, and eye diagram for the demonstrated 32 channel × 40 Gb/s wavelength division multiplexing optical communication system utilizing different configurations of the hybrid fiber amplifier is compared. The CSP-HFA shows better performance than serial and parallel hybrid amplifiers in terms of wider flat gain bandwidth, higher quality factor, lower bit error rate, and wider and clearer eye opening. Furthermore, CSP-HFA exhibits a flat gain bandwidth of 65 nm with an acceptable average gain of 16 dB and average noise figure of 7 dB.

42 ENGINEERING↗

Worst crosstalk analysis in heterogeneous and trench assisted heterogeneous multicore fiber for different core counts and layouts

In order to obtain appreciably low worst crosstalk level in high core count multicore fiber, heterogeneous MCF with different core configurations and layouts have been investigated analytically using coupled mode equation. The variations in worst crosstalk behavior with respect to the bending radius, core configurations, core layouts, and outer cladding thickness have been analyzed. Further, the core count dependent variations in worst crosstalk level, core pitch, and peak bending radius in different core layouts have been presented. It has been observed that the selection of core configuration, core layout, and outer cladding thickness have significant impact on the reduction in worst crosstalk level. For example, in 12-core normal-index heterogeneous MCF with SLS structure, the core Configuration 1 can provide the worst crosstalk level reduced by 7.09 dB and 16.92 dB in comparison to the other two core configurations, i.e., Configuration 2, and Configuration 3, respectively. Further, for the same core count with TA Configuration 1, SLS core layout can achieve the reduced worst crosstalk level in comparison with circular ORS and DRS, hexagonal ORS and DRS respectively by 24.62 dB, 25.86 dB, 28.87 dB and 30.64 dB.

36 MATERIALS SCIENCE↗

Differences in Oxidation Behavior of Conventionally Cast and Additively Manufactured Co-Base Alloy MAR-M-509

High-temperature oxidation behavior of conventionally cast and additively manufactured (AM) Co-base alloy MAR-M-509 was compared in the present study. The specimens were exposed in air at 1000 °C and characterized by means of scanning electron microscopy equipped with energy/wavelength dispersive x-ray spectroscopy (EDX/WDX) and electron backscatter diffraction as well as transmission electron microscopy. Substantial differences in the oxidation processes of two alloy versions were observed. Faster oxidation of the cast alloy was mainly induced by (1) oxidation of coarse primary carbides, (2) internal oxidation and nitridation processes and (3) incorporation of other alloy constituents (e.g., Co, Ni, W) into the Cr-oxide scale. AM specimens, in contrast, formed a more homogeneous, thinner and better adherent external oxide scale. The results are discussed in terms of differences in the chemical composition and alloy microstructure, including the grain size distribution in the material and the morphology of the strengthening precipitate phases.

36 MATERIALS SCIENCE↗

Structural comparison of allophycocyanin variants reveals the molecular basis for their spectral differences

Abstract Allophycocyanins are phycobiliproteins that absorb red light and transfer the energy to the reaction centers of oxygenic photosynthesis in cyanobacteria and red algae. Recently, it was shown that some allophycocyanins absorb far-red light and that one subset of these allophycocyanins, comprising subunits from the ApcD4 and ApcB3 subfamilies (FRL-AP), form helical nanotubes. The lowest energy absorbance maximum of the oligomeric ApcD4-ApcB3 complexes occurs at 709 nm, which is unlike allophycocyanin (AP; ApcA-ApcB) and allophycocyanin B (AP-B; ApcD-ApcB) trimers that absorb maximally at ~ 650 nm and ~ 670 nm, respectively. The molecular bases of the different spectra of AP variants are presently unclear. To address this, we structurally compared FRL-AP with AP and AP-B, performed spectroscopic analyses on FRL-AP, and leveraged computational approaches. We show that among AP variants, the α-subunit constrains pyrrole ring A of its phycocyanobilin chromophore to different extents, and the coplanarity of ring A with rings B and C sets a baseline for the absorbance maximum of the chromophore. Upon oligomerization, the α-chromophores of all AP variants exhibit a red shift of the absorbance maximum of ~ 25 to 30 nm and band narrowing. We exclude excitonic coupling in FRL-AP as the basis for this red shift and extend the results to discuss AP and AP-B. Instead, we attribute these spectral changes to a conformational alteration of pyrrole ring D, which becomes more coplanar with rings B and C upon oligomerization. This study expands the molecular understanding of light-harvesting attributes of phycobiliproteins and will aid in designing phycobiliproteins for biotechnological applications.

Gisriel, Christopher J.↗

The K5 capsular polysaccharide of the bacterium Acinetobacter baumannii SDF with the same K unit containing Leg5Ac7Ac as the K7 capsular polysaccharide but a different linkage between the K units

The K5 capsular polysaccharide (CPS) was isolated from the bacterium Acinetobacter baumannii (A. baumannii) SDF and studied by 1D and 2D {sup 1}H and {sup 13}C NMR spectroscopy before and after O-deacetylation and partial acid hydrolysis. The CPS was found to be composed of branched tetrasaccharide repeats (K units) containing 5,7-diacetamido-3,5,7,9-tetradeoxy-D-glycero-D-galacto-non-2-ulosonic acid (Leg5Ac7Ac). The KL5 capsule biosynthesis gene cluster at the K locus is consistent with the composition and structure of the CPS. KL5 is almost identical to the KL7 gene ulosonic acid (Leg5Ac7Ac A. baumannii LUH5533 that has been characterized earlier, and differs only in the gene for Wzy polymerase that is responsible for the formation of the linkage between the K units. The K5 CPS from strain SDF and the K7 CPS from strain LUH5533 have the same K-unit structure but a different linkage between the K units, which is formed by distinct Wzy polymerases. As opposite to Leg5Ac7Ac in the K7 CPS, this monosaccharide is O-acetylated at position 4 in the K5 CPS. No acetyltransferase for this modification of the K5 CPS is present in the KL5 gene cluster, and hence it is encoded by a gene located elsewhere in the genome.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stages of Mechanical Alloying in Systems with Different Solubility Cu–Zn and Au–Co in the Case of Cold and Low-Temperature Deformation by Torsion Under Pressure

Methods of X-ray structural analysis and durometry, as well as electron microscopy were used to identify the stages of mechanical alloying in the case of torsion under high quasi-hydrostatic pressure on Bridgman anvils in the Cu–Zn and Au–Co systems that have different mutual solubility and enthalpy of mixing. It was established that decrease in temperature of mechanical alloying from room temperature (cold deformation) to the boiling temperature of liquid nitrogen (80 К, low-temperature deformation) has a considerable impact on mechanical alloying at different processing stages and on characteristics of an alloy synthesized by deformation. In the Cu–Zn system, when the ratio of powder components corresponds to the solid solution of α-brass in equilibrium state, as deformation increased, one observed consecutive change of evolution stages of the powder mix to the state of copper-based solid solution. At the same time, when processing temperature decreases, larger deformation is required to achieve analogous structural changes. In the Au–Co system characterized by absence of solubility at room and lower temperatures, one also observes the stages of powder mix evolution with the increase in deformation. However, complete dissolution occurs in the case of processing at 80 К, while larger deformation is required in the case of increase in mechanical alloying temperature. The paper examines possible mechanisms of solid solution formation in the system of components that are mutually insoluble under equilibrium conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Functional and ecophysiological traits of Halimione portulacoides and Sarcocornia perennis ecotypes in Mediterranean salt marshes under different tidal exposures

Abstract The present paper aims to discuss the functional and ecophysiological traits of two abundant succulent halophytes in Mediterranean salt marsh systems, considering two ecotypes differing on their tidal exposure. In Halimione portulacoides the higher root/shoot (R/S) biomass ratio verified in low inundation frequency (LF) marshes, as compared with that in high inundation frequency (HF), indicates an optimal partitioning strategy, inducing differential allocation patterns along with varying environmental factors. Conversely, Sarcocornia perennis appear to have an isometric allocation strategy, based on intrinsic biomass allocation mechanisms independent from the surrounding environmental conditions. Similarly, the photosynthetic traits appear to reflect the intrinsic ecology of the species. Sarcocornia perennis habitat adaptation to HF conditions is clearly revealed by its high photosynthetic efficiency under HF conditions. On the other hand, the cosmopolitan H. portulacoides shows no differences between ecotypes, in which concerns this trait, mostly due to the high carotenoid content of the HF ecotype, which allows this specie to counteract the stress generated during submersion. Additionally, anti‐oxidant enzymatic activities revealed that S. perennis presents a high degree of stress tolerance under HF conditions, while H. portulacoides is highly adapted to LF conditions. These functional (biomass‐related) and physiological traits determine the optimal habitats for H. portulacoides and S. perennis . While H. portulacoides optimal biomass partitioning, along with its efficient anti‐oxidant defence system, makes this species fitter to LF conditions, S. perennis isometric allocation strategy, along with a higher photosynthetic efficiency under frequent flooding conditions, provides this species the mechanisms to efficiently colonize the intertidal habitat.

Duarte, Bernardo↗

An experimental investigation on acoustic emission characteristics of sandstone rockburst with different moisture contents

Rockburst occurred frequently during deep mining in China. The mechanism of rockburst is very complicated and related to many factors. In order to investigate the influence of moisture contents of rockmass on rockburst, we conducted a series of laboratory rockburst experiments of sandstone under three different moisture contents by the Modified True-Triaxial Apparatus (MTTA), in which the acoustic emission (AE) system was employed to monitor the internal damage of rock mass. A high-speed video camera was utilized to record the detail of rockburst. Based on the experimental results, the AE characteristics, such as AE count, AE energy, and AE frequency, were analyzed. The rockburst process, type, and indensity under different moisture contents were discussed. The research results show that with the increase of moisture contents, rock strength was soften, the elastic and the cumulative damage of the rock were reduced, resulting in a gradual decrease in AE cumulative counts and cumulative energy over the course of rockburst. Finally, this study provides an experimental basis and reference for better understanding to the rockburst mechanism and control.

58 GEOSCIENCES↗

Characterization of Micro-arc Oxidation Coatings on 6N01 Aluminum Alloy Under Different Electrolyte Temperature Control Modes

The micro-arc oxidation coatings of 6N01 aluminum alloy produced under different control modes of the electrolyte temperature are discussed in detail. Compared to those coated by a thermostatically controlled treatment, the coatings had different surface characterizations when they were coated without controlling the electrolyte temperature, particularly after treatment involving boiling electrolytes. Scanning electron microscopy and confocal laser scanning microscopy were used to observe the morphology of the coatings. Energy-dispersive spectrometry and x-ray diffractometer were used to characterize their elemental and crystalline phase compositions. The results indicate that the treatment without a controlled electrolyte temperature ultimately led to a thicker and rougher film with a respectably thick inner barrier film, a lower content of γ-Al{sub 2}O{sub 3} and better corrosion resistance.

36 MATERIALS SCIENCE↗

Contradictory Feature Size Effects in the Tensile Yield Strength of Cu Sheets Produced Using Different Sequences Involving Annealing, Rolling, and Grinding

The feature size effect is significant research interest in the field of microforming. It is assumed that the size effect is influenced by the material preparation process. To verify this, the feature size effects associated with the tensile yield strength of Cu sheets with thicknesses ranging from 100 to 200 μm, produced using different sequences involving annealing, rolling, and grinding, were studied. Differing feature size effects were observed in the Cu specimens, and it was confirmed that the size effect was indeed influenced by the specimen preparation sequence. The tensile yield strengths of the annealed–ground–rolled and annealed–rolled specimens increased as the specimen thicknesses decreased. However, an opposing size effect was observed in the case of the annealed–rolled–annealed, annealed–ground, and annealed–rolled–ground specimens. The reduction ratio did not alter the trend associated with the size effect, but influenced the intensity of the size effect. It is believed that the reinforcement and erosion of the surface-hardened layer introduced during rolling resulted in the contradictory results.

36 MATERIALS SCIENCE↗

Surface Integrity Analysis of Ti6Al4V After Semi-finishing Turning Under Different Low-Temperature Cooling Strategies

During machining of difficult-to-cut alloys, the rapid tool wear as a consequence of the high values of cutting forces and temperatures significantly affects the surface integrity of the machined surfaces reducing the product in-service performances. The use of conventional cutting fluids limits the tool deterioration, but provides several environmental issues to deal with, such as the exhausted fluid disposal, cleaning of the parts after machining, health hazards for the machines operators. In recent years, several researches have proposed to use environmental-friendly cryogenic coolants, whose very low operating temperatures have demonstrated to be able to inhibit the thermally activated tool wear mechanisms leaving the machined surface almost free from pollutants. In this framework, the aim of this research work is to analyze the surface integrity of the machined surfaces produced in semi-finishing turning of the Ti6Al4V titanium alloy under different low-temperature cooling techniques, namely liquid nitrogen (LN{sub 2}), carbon dioxide (CO{sub 2}) and gaseous nitrogen (N{sub 2}) cooled at different temperatures, using the dry and wet cutting conditions as baseline. The surface integrity was evaluated considering both the surface finish (surface defects, roughness and topography) and the surface microstructural and mechanical alterations (altered layer, nano-hardness and residual stresses). The results showed that the best performances were obtained using N{sub 2} cooled at − 150 °C, which determined both the absence of surface defects, as wrinkles or feed marks irregularities typical of the surface generated under LN{sub 2}, and high compressive residual stresses that made the surface suitable for biomedical and aerospace applications.

36 MATERIALS SCIENCE↗

Effect of Initial Microstructure on Properties of Cryorolled Al 5052 Alloy Subjected to Different Annealing Treatment Temperatures

Al 5052 alloy sheets were subjected to different pre-annealing temperatures (150, 200, 250, 300, and 350 °C) prior to cryorolling. The process resulted in Al 5052 alloys with different initial microstructures. The pre-annealed alloy sheets were compared with a cryorolled sample not subjected to pre-annealing. The thicknesses of the alloy samples after cryorolling was reduced by 30%. The pre-annealed cryorolled samples exhibited low crystallite size, and high lattice strain. Among them, the cryorolled sample pre-annealed at 300 °C had the lowest crystallite size, and the highest lattice strain. Changes in initial microstructure of this sample resulted in a significant improvement in its hardness (88 Hv), tensile strength (333 MPa), and corrosion resistance. The sample had the highest corrosion resistance among the cryorolled samples.

36 MATERIALS SCIENCE↗