SEARCH · Engineering Papers
Results for “deployables”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ka-Band Parabolic Deployable Antenna (KaPDA) Enabling High Speed Data Communication for CubeSats
CubeSats are at a very exciting point as their mission capabilities and launch opportunities are increasing. But as instruments become more advanced and operational distances between CubeSats and earth increase communication data rate becomes a mission-limiting factor. Improving data rate has become critical enough for NASA to sponsor the Cube Quest Centennial Challenge when: one of the key metrics is transmitting as much data as possible from the moon and beyond Currently, many CubeSats communicate on UHF bands and those that have high data rate abilities use S-band or X-band patch antennas. The CubeSat Aneas, which was launched in September 2012, pushed the envelope with a half-meter S-band dish which could achieve 100x the data rate of patch antennas. A half-meter parabolic antenna operating at Ka-band would increase data rates by over 100x that of the AMOS antenM and 10,000 that of X-band patch antennas.
Ultra-Compact Ka-Band Parabolic Deployable Antenna for RADAR and Interplanetary Communications
No abstract available
Looking Up: An SMD Technology Brown Bag Series - The Adaptable, Deployable Entry and Placement Technology (ADEPT)
No abstract available
Recent Deployments of NASA Marshall Space Flight Center Atmospheric Electricity Instruments
No abstract available
Modeling, Simulation, and Robust Design of the TSIS Pointing Controller for ISS Deployment
To ensure high quality TSIS science measurements, stringent requirements were levied on the pointing system performance. Several factors complicated the design of the pointing system controller including uncertainty in knowledge of the ISS base motion jitter, the use of direct drive brushless DC motors for the gimbal system, and the presence of TSIS structure low frequency modes. This paper will describe the modeling, simulation, analysis, and robust design techniques employed to reduce risk resulting in a pointing system that met requirements on-orbit.
Arcjet Testing of Woven Carbon Fabric Joints for Use on Adaptive Deployable Entry Placement Technology
No abstract available
Scientific and Technical Assistance for the Deployment of a Flexible Airborne Spectrometer System During C-MAPExp and COMEX: COMEX Version - 1.9T
The COMEX (CO2 and MEthane eXperiment) campaign supports the mission definition of CarbonSat and HyspIRI (Hyperspectral Infrared Imager) by providing representative airborne remote sensing data ‐ MAMAP (Methane Airborne MAPper) for CarbonSat; the Airborne Visual InfraRed Imaging Spectrometer (Classic & Next Generation) AVIRIS‐C/AVIRIS‐NG for HyspIRI ‐ as well as ground-based and airborne in‐situ data. The objectives of the COMEX campaign activities are (see Campaign Implementation Plan (RD‐4)): 1. Investigate spatial/spectral resolution trade‐offs for CH4 anomaly detection and flux inversion by comparison of MAMAP‐derived emission estimates with AVIRIS/AVIRIS‐NG derived data. 2. Evaluate sun‐glint observation geometry on CH4 retrievals for marine sources. 3. Characterize the effect of Surface Spectral Reflectance (SSR) heterogeneity on trace gas retrievals of CO2 and CH4 for medium and low‐resolution spectrometry. 4. Identify benefits from joint SWIR/TIR (ShortWave InfraRed/Thermal InfraRed ) data for trace gas detection and retrieval by comparison of MAMAP and AVIRIS/AVIRIS‐NG NIR/SWIR data with MAKO (Aerospace Corp.)TIR data. The ability to derive emission source strength for a range of strong emitting targets by remote sensing will be evaluated from combined AVIRIS‐NG and MAMAP data, adding significant value to the HyspIRI campaign AVIRIS‐NG dataset. The data will be used to quantify anomalies in atmospheric CO2 and CH4 from strong local greenhouse gas sources e.g. localized industrial complexes, landfills, etc. and to derive CO2 and CH4 emissions estimates from atmospheric gradient measurements. The original campaign concept was developed by University of Bremen and BRI. The COMEX campaign is funded bilaterally by NASA and ESA (European Space Agency). Whereas NASA funds the US part of the project via a contract with Dr. Ira Leifer, BRI (Bubbleology Research International), the contribution of MAMAP to the COMEX campaign is funded by ESA within the COMEX‐E project and NASA with respect to a 50 percent contribution to the flight-related costs of flying MAMAP on a US aircraft. The Data Acquisition Report (RD‐9) describes the instrumentation used, the measurements made by the team during the COMEX campaign in May/June 2014 and August/September 2014 in California, and an initial assessment of the data quality.
Radioisotope Power Systems (RPS) for Emerging Power Needs of Deep Space Cubesats, Smallsats and Deployed Payloads
No abstract available
A Neptune Orbiter Concept Using Drag Modulated Aerocaptue (DMA) and the Adaptable, Deployable Entry and Placement Technology (ADEPT)
Conceptual Neptune orbiter was designed for the purpose of assessing mission feasibilityBuilt off of the 2017 Pre-Decadal Study, but adapted for drag modulation aerocapture.Science payload includes: Narrow Angle camera, Doppler Imager, Magnetometer, Atmospheric Probe (w/ ASI, Nephelometer, Mass Spectrometer). Baseline concept of operations releases probe prior to orbit insertion, but investigations are ongoing to assess the feasibility of bringing the probe to orbit before release.
Evaluating the Socioeconomic Impacts of Rapid Assembly and Deployment of Geospatial Data in Wildfire Emergency Response Planning: A Case Study Using the NASA RECOVER Decision Support System (DSS)
Today’s extended fire seasons and large fire footprints have prompted state and federal land management agencies to devote increasingly larger portions of their budget to wildfire management. As fire costs continue to rise, timely and comprehensive fire information becomes increasingly critical to response and rehabilitation efforts. The NASA Rehabilitation Capability Convergence for Ecosystem Recovery (RECOVER) post-fire decision support system is a server-based application designed to rapidly provide land managers with the information needed to develop a comprehensive rehabilitation plan. This study tested the efficacy of RECOVER through structured interviews with land managers (n=15) who used RECOVER and were responsible for post-fire rehabilitation efforts on over 645 000 ha of fire-affected lands. Although the benefit of better-informed decisions is difficult to quantify, the results of this study illustrate RECOVER’s decision support capabilities provided information to land managers that either validated or altered their decisions on post-fire treatments estimated at over $1.2 million (USD) and saved nearly 800 hours of staff time by streamlining data collection as well as communication with local stakeholders and partnering agencies.
Deployment Modeling for the Surface Water and Ocean Topography (SWOT) Mission
No abstract available