Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data harmonization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

The Structure of the Uranian Rings and the Search for Rings Around Neptune

The nine narrow rings of Uranus, presently the only confirmed features of this system, have been observed with the diffraction-limited resolution (3.5 km) of ground-based occultations since their discovery in 1977. These data have been used to establish an orbit model, from which the five Keplerian orbit parameters for each ring, the pole of the mean ring plane, and the gravitational harmonic coefficients J sub 2 and J sub 4 have been determined. The rings are typically a few kilometers wide with eccentricities of about 0.001 and inclinations of a few hundredths of a degree, although a few have no measurable eccentricity or inclination. Interesting Voyager investigations would include probing the structure of the rings at higher spatial resolution, searching for new rings in the system (including inter-ring material), locating the postulated shepherd satellites, and searching for satellites inside the orbit of Miranda that might have dynamical influence on the rings. The high precision (approx 2 km) of the ring orbits might prove useful for spacecraft navigation. For Neptune, occultation searches have revealed no rings to a limit of a few hundreths optical depth, within a few hundred kilometers from the top of the planet's atmosphere (for equatorial rings).

Elliot, J. L.↗
NASA NTRS1984

Predicted changes in advanced turboprop noise with shaft angle of attack

Advanced turboprop blade designs and new propeller installation schemes motivated an effort to include unsteady loading effects in existing propeller noise prediction computer programs. The present work validates the prediction capability while studing the effects of shaft inclination on the radiated sound field. Classical methods of propeller performance analysis supply the time-dependent blade loading needed to calculate noise. Polar plots of the sound pressure level (SPL) of the first four harmonics and overall SPL are indicative of the change in directivity pattern as a function of propeller angle of attack. Noise predictions are compared with newly available wind tunnel data and the accuracy and applicability of the prediction method are discussed. It is concluded that unsteady blade loading caused by inclining the propeller with respect to the flow changes the directionality and the intensity of the radiated noise. These changes are well modeled by the present quasi-steady prediction method.

Padula, S. L.↗
NASA NTRS1988

Analysis of in-flight acoustic data for a twin-engined turboprop airplane

Acoustic measurements were made on the exterior and interior of a general aviation turboprop airplane during four flight tests. The test conditions were carefully controlled and repeated for each flight in order to determine data variability. For the first three flights the cabin was untreated and for the fourth flight the fuselage was treated with glass fiber batts. On the exterior, measured propeller harmonic sound pressure levels showed typical standard deviations of +1.4 dB, -2.3 dB, and turbulent boundary layer pressure levels, +1.2 dB, -1.6. Propeller harmonic levels in the cabin showed greater variability, with typical standard deviations of +2.0 dB, -4.2 dB. When interior sound pressure levels from different flights with different cabin treatments were used to evaluate insertion loss, the standard deviations were typically plus or minus 6.5 dB. This is due in part to the variability of the sound pressure level measurements, but probably is also influenced by changes in the model characteristics of the cabin. Recommendations are made for the planning and performance of future flight tests to measure interior noise of propeller-driven aircraft, either high-speed advanced turboprop or general aviation propellers.

Wilby, J. F.↗
NASA NTRS1987

An eastward propagating compressional Pc 5 wave observed by AMPTE/CCE in the postmidnight sector

This paper presents a detailed analysis of a compressional Pc 5 wave observed in the postmidnight sector on July 21, 1986, using data from the magnetometer, the charge-energy-mass spectrometer, and the medium-energy particle analyzer aboard the AMPTE/Charge Composition Explorer (CCE) spacecraft. The Pc 5 wave exhibited harmonically related transverse and compressional magnetic oscillations, modulation of the flux of medium energy protons, and a large azimuthal wave number, i.e., properties that are similar to those of compressional Pc5 waves observed previously at geostationary orbit. The unique observations recorded by the AMPTE/CCE included the occurrence of the wave in the postmidnight sector, its sunward propagation with respect to the spacecraft, and the left-handed polarization of the perturbed magnetic field. In spite of the morphological uniqueness observed, the excitation of the July 21 event is considered to be due to the same type of instability as operates at geostationary orbit.

Takahashi, K.↗
NASA NTRS1988

Magnetic and electric field meters developed for the US Department of Energy

This report describes work done at the Jet Propulsion Laboratory for the Office of Energy Storage and Distribution of DOE on the measurement of power line fields. A magnetic field meter is discussed that uses fiber optics to couple a small measuring probe to a remote readout device. The use of fiber optics minimizes electric field perturbation due to the presence of the probe and provides electric isolation for the probe, so that it could be used in a high field or high voltage environment. Power to operate the sensor electronics is transferred via an optical fiber, and converted to electrical form by a small photodiode array. The fundamental, the second and third harmonics of the field are filtered and separately measured, as well as the broadband rms level of the field. The design of the meter is described in detail and data from laboratory tests are presented. The report also describes work done to improve the performance of a DC bushing in a Swedish factory, using the improved meter. The DC electric fields are measured with synchronous detection to provide field magnitude data in two component directions.

Kirkham, H.↗
NASA NTRS1993

On the generation of plasma waves in Saturn's inner magnetosphere

Voyager 1 plasma wave measurements of Saturn's inner magnetosphere are reviewed with regard to interpretative aspects of the wave spectrum. A comparison of the wave emission profile with the electron plasma frequency obtained from in situ measurements of the thermal ion density shows good agreement with various features in the wave data identified as electrostatic modes and electromagnetic radio waves. Theoretical calculations of the critical flux of superthermal electrons able to generate whistler-mode waves and electrostatic electron cyclotron harmonic waves through a loss-cone instability are presented. The comparison of model results with electron measurements shows excellent agreement, thereby lending support to the conclusion that a moderate perpendicular anisotropy in the hot electron distribution is present in the equatorial region of L = 5-8.

Barbosa, D. D.↗
NASA NTRS1994

Radiation from advanced solid rocket motor plumes

The overall objective of this study was to develop an understanding of solid rocket motor (SRM) plumes in sufficient detail to accurately explain the majority of plume radiation test data. Improved flowfield and radiation analysis codes were developed to accurately and efficiently account for all the factors which effect radiation heating from rocket plumes. These codes were verified by comparing predicted plume behavior with measured NASA/MSFC ASRM test data. Upon conducting a thorough review of the current state-of-the-art of SRM plume flowfield and radiation prediction methodology and the pertinent data base, the following analyses were developed for future design use. The NOZZRAD code was developed for preliminary base heating design and Al2O3 particle optical property data evaluation using a generalized two-flux solution to the radiative transfer equation. The IDARAD code was developed for rapid evaluation of plume radiation effects using the spherical harmonics method of differential approximation to the radiative transfer equation. The FDNS CFD code with fully coupled Euler-Lagrange particle tracking was validated by comparison to predictions made with the industry standard RAMP code for SRM nozzle flowfield analysis. The FDNS code provides the ability to analyze not only rocket nozzle flow, but also axisymmetric and three-dimensional plume flowfields with state-of-the-art CFD methodology. Procedures for conducting meaningful thermo-vision camera studies were developed.

Farmer, Richard C.↗
NASA NTRS1994

A Coupled-Cluster Study of the Molecular Structure, Vibrational Spectrum, and Relative Energies of the XCN and XNC (X=F, Cl) Isomers

The XCN and XNC (X=F, Cl) isomers have been investigated using the CCSD and CCSD(T) methods in conjunction with a TZ2P basis set. Equilibrium geometries, dipole moments, harmonic frequencies, IR intensities and relative energies have been evaluated. The CCSD(T) geometries and vibrational frequencies for the XCN isomers are in good agreement with the available experimental data. The CCSD(T) results for FCN and FNC are in good agreement with the CEPA calculations of Botshwina et al., with the exception of the energy difference, which the CEPA method underestimates by about 1.2 kcal/mol. FCN and CICN are shown to be lower in energy than the FNC and ClNC isomers by 69.511.0 and 42.711.0 kcal/mol (0 K), respectively.

Lee, Timothy J.↗
NASA NTRS2010

A Computational Study of BVI Noise Reduction Using Active Twist Control

The results of a computational study examining the effects of active-twist control on blade-vortex interaction (BVI) noise using the Apache Active Twist Rotor are presented. The primary goal of this activity is to reduce BVI noise during a low-speed descent flight condition using active-twist control. Rotor aeroelastic behavior was modeled using the Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics code and the rotor noise was predicted using the acoustics code PSU-WOPWOP. The accuracy of the analysis was validated through comparisons with experimental acoustic data for the first generation Active Twist Rotor at an advance ratio of mu=0.14. The application of active-twist to the main rotor blade system consisted of harmonic actuation frequencies ranging from 2P to 5P, control phase angles from 0' to 360 , and tip-twist amplitudes ranging from 0.5 to 4.0 . The acoustic analysis was conducted for a single low-speed flight condition of advance ratio =0.14 and shaft angle-of-attack, c^=+6 , with BVI noise levels predicted on a flat plane of observers located 1.1 rotor diameters beneath the rotor. The results indicated reductions of up to 11dB in BVI noise using 1.25 tip-twist amplitude with negligible effects on 4P vertical hub shear.

Fogarty, David E.↗
NASA NTRS2016

Multipoint Spacecraft Observations of Long-Lasting Poloidal Pc4 Pulsations in the Dayside Magnetosphere on 1-2 May 2014

We use magnetic field and plasma observations from the Van Allen Probes, Time History of Events and Macroscale Interactions during Substorms (THEMIS) and Geostationary Operational Environmental Satellite system (GOES) spacecraft to study the spatial and temporal characteristics of long-lasting poloidal Pc4 pulsations in the dayside magnetosphere. The pulsations were observed after the main phase of a moderate storm during low geomagnetic activity. The pulsations occurred during various interplanetary conditions and the solar wind parameters do not seem to control the occurrence of the pulsations. The most striking feature of the Pc4 magnetic field pulsations was their occurrence at similar locations during three of four successive orbits. We used this information to study the latitudinal nodal structure of the pulsations and demonstrated that the latitudinal extent of the magnetic field pulsations did not exceed 2 Earth radii (R(sub E)). A phase shift between the azimuthal and radial components of the electric and magnetic fields was observed from Z(sub SM) = 0.30 R(sub E) to Z(sub SM) = -0.16 R(sub E). We used magnetic and electric field data from Van Allen Probes to determine the structure of ULF waves. We showed that the Pc4 magnetic field pulsations were radially polarized and are the second-mode harmonic waves. We suggest that the spacecraft were near a magnetic field null during the second orbit when they failed to observe the magnetic field pulsations at the local times where pulsations were observed on previous and successive orbits. We investigated the spectral structure of the Pc4 pulsations. Each spacecraft observed a decrease of the dominant period as it moved to a smaller L shell (stronger magnetic field strength). We demonstrated that higher frequencies occurred at times and locations where Alfven velocities were greater, i.e., on Orbit 1. There is some evidence that the periods of the pulsations increased during the plasmasphere refilling following the storm.

Korotova, Galina↗
NASA NTRS2001

Estimation of Aircraft Unsteady Aerodynamic Parameters from Dynamic Wind Tunnel Testing

Improved aerodynamic mathematical models, for use in aircraft simulation or flight control design, are required when representing nonlinear unsteady aerodynamics. A key limitation of conventional aerodynamic models is the inability to map frequency and amplitude dependent data into the equations of motion directly. In an effort to obtain a more general formulation of the aerodynamic model, researchers have been led to a parallel requirement for more general testing methods. Testing for a more comprehensive model can lead to a very time consuming number of tests especially if traditional single frequency harmonic testing is attempted. This paper presents an alternative to traditional single frequency forced-oscillation testing by utilizing Schroeder sweeps to efficiently obtain the frequency response of the unsteady aerodynamic model. Schroeder inputs provide signals with a flat power spectrum over a specified frequency band. For comparison, experimental results using the traditional single-frequency inputs are also considered. A method for data analysis to determine an adequate unsteady aerodynamic model is presented. Discussion of associated issues that arise during this type of analysis and comparison of results using traditional single frequency analysis are provided.

Murphy, Patrick C.↗
NASA NTRS2000

Condition Monitoring for Helicopter Data

In this paper the classical "Westland" set of empirical accelerometer helicopter data is analyzed with the aim of condition monitoring for diagnostic purposes. The goal is to determine features for failure events from these data, via a proprietary signal processing toolbox, and to weigh these according to a variety of classification algorithms. As regards signal processing, it appears that the autoregressive (AR) coefficients from a simple linear model encapsulate a great deal of information in a relatively few measurements; it has also been found that augmentation of these by harmonic and other parameters can improve classification significantly. As regards classification, several techniques have been explored, among these restricted Coulomb energy (RCE) networks, learning vector quantization (LVQ), Gaussian mixture classifiers and decision trees. A problem with these approaches, and in common with many classification paradigms, is that augmentation of the feature dimension can degrade classification ability. Thus, we also introduce the Bayesian data reduction algorithm (BDRA), which imposes a Dirichlet prior on training data and is thus able to quantify probability of error in an exact manner, such that features may be discarded or coarsened appropriately.

Wen, Fang↗
NASA NTRS1998

White Dwarf Pulsars

Work on NAG5-3288 ("White Dwarf Pulsars") has been fully integrated with the identically titled project NAG5-4734. The final report below is the same, since the data analysis and interpretative work are integrated, as are the resulting (previous and in-pipeline) publications. The proposal was designed to study pulse and orbital modulations in candidate DQ Herculis stars. Data on 5 stars were obtained. The best results were obtained on YY Draconis, which exhibited a strongly pulsed hard X-ray flux, and even suggested a transition between one-pole and two-pole emission during the course of the observation. This result is being readied for inclusion in a comprehensive study of YY Draconis. A strong pulsation appeared to be present also in H0857-242, but with a period of - 50 minutes, confusion with the first harmonic of the satellite's orbital frequency is possible. So that result is uncertain and is "on ice". A negative result was obtained on 4UO608-49 (V347 Pup), suggesting either that the X-ray identification is incorrect, or that the source is very transient. Finally, data was obtained on V1432 Aql and WZ Sge, respectively the slowest and fastest of these stars. Combined with the ASCA data, the high-energy data demonstrates the latter to contain a white dwarf rotating with P = 27.87 s (Patterson et al. 1998, PASP, 110, 403). Optical photometry contemporaneous with the X-ray data was obtained of V1432 Aql, in order to study the variations in the eclipse waveform. As anticipated, the width and centroid of the eclipse appeared to vary with the 50-day "supercycle".

Patterson, Joseph↗
DOE OSTI2021

Tidal Circularization of Binaries by Resonance Locking. I. The Importance of the Pre-main Sequence

Although tidal dissipation in binary stars has been studied for over a century, theoretical predictions have yet to match the observed properties of binary populations. This work quantitatively examines the recent proposal of tidal circularization by resonance locking, where tidal dissipation arises from resonances between the star’s natural oscillation frequencies and harmonics of the orbital frequency, and where resonances are “locked” for an extended period of time due to concurrent stellar evolution. We focus on tidal resonances with axi-symmetric gravity modes, and examine binaries with primary masses from one to two solar masses. We find that orbital evolution via resonance locking occurs primarily during the star’s pre-main-sequence phase, with the main-sequence phase contributing negligibly. Resonance locking, ignoring nonlinearity, can circularize binaries with peri-center distances out to ∼10 stellar radii, corresponding to circular periods of ∼4–6 days. However, we find resonantly excited gravity modes will become nonlinear in stellar cores, which prevents them from reaching their full, linear amplitudes. We estimate that such a “saturated resonance lock” reduces the circularization period by about a third, but resonance locking remains much more effective than the cumulative actions of equilibrium tides. In a companion paper, we examine recent binary data to compare against theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2004

An Improved Model of the Crustal Structure of Mars

The first reliable model of the structure of the crust and upper mantle of Mars from remote observations was produced using data from the Mars Orbiter Laser Altimeter (MOLA) and the Radio Science investigation of Mars Global Surveyor (MGS). That model assumed a uniform crustal density and solved for the global variations in crustal thickness using a gravity field derived from preliminary MGS tracking. In that study, spherical harmonic potential coefficients were derived to degree and order 80, but crustal structure was interpreted cautiously to degree 60, or 360 km wavelength, owing to the presence of noise. Tracking normal equations have since been generated to degree 75, to degree 80 (supplemented by altimetric crossovers), and recently to degree 90, using new constants for the orientation of the spin pole and the rotation rate of Mars provided by the IAU2000 rotation model. Gravity models now incorporate tracking data coverage from the Primary and Extended MGS missions and the early phases of the Mars Odyssey mission. In the present study we exploit these advances in gravity modeling to present a refined crustal inversion, which we also interpret in the context of Mars' internal structure and thermal evolution.

Zuber, M. T.↗
NASA NTRS1998

Line Narrowing Parameter Measurement by Modulation Spectroscopy

Accurate Characterization of Oxygen A-Band Line Parameters by Wavelength Modulation Spectroscopy with tunable diode lasers is an ongoing research at Old Dominion University, under sponsorship from NASA Langley research Center. The work proposed here will be undertaken under the guidance of Dr. William Chu and Dr. Lamont Poole of the Aerosol Research Branch at NASA Langley-Research Center in Hampton, Virginia. The research was started about two years ago and utilizes wavelength modulation absorption spectroscopy with higher harmonic detection, a technique that we developed at Old Dominion University, to obtain the absorption line characteristics of the Oxygen A-band rovibronic lines. Accurate characterization of this absorption band is needed for processing of data that will be obtained in experiments such as the NASA Stratospheric Aerosol and Gas Experiment III (SAGE III) as part of the US Mission to Planet Earth. The research work for Summer Fellowship undertook a measurement of the Dicke line-narrowing parameters of the Oxygen A-Band lines by using wavelength modulation spectroscopy. Our previous theoretical results had indicated that such a measurement could be done sensitively and in a convenient fashion by using this type of spectroscopy. In particular, theoretical results had indicated that the signal magnitude would depend on pressure in a manner that was very sensitive to the narrowing parameter. One of the major tasks undertaken during the summer of 1998 was to establish experimentally that these theoretical predictions were correct. This was done successfully and the results of the work are being prepared for publication. Experimental Results were obtained in which the magnitude of the signal was measured as a function of pressure, for various harmonic detection orders (N = 1, 2, 3, 4, 5). A comparison with theoretical results was made, and it was shown that the agreement between theory and experiment was very good. More importantly, however, it was shown that the measurement was yielded a very sensitive technique for obtaining the narrowing parameter that describes the deviation of Oxygen A-band lines from the Voigt profile. In particular, it was seen that the best fits were obtained consistently when the narrowing parameter value used was 0.022 1/cm, 1/Atm, Previous work, upon which the current work was based has resulted in several accurate measurements of properties of particular lines of the Oxygen A band. For example, this work has resulted in the measurement of the collision cross sections of several lines including the RQ(13,14) and the RR(15,15) lines. A major achievement of achievement of the work was also the demonstration that the technique we have developed can accurately probe the structure of the absorption lineshape function. In particular, the method we have developed is very well suited for experimentally probing the characteristics of lines in their wings. This work was accepted for publication in the Journal of Applied Physics, and is scheduled to appear in the December 15, 1998 issue.

Dharamsi, Amin N.↗
NASA NTRS1989

Numerical analysis of flow through oscillating cascade sections

The design of turbomachinery blades requires the prevention of flutter for all operating conditions. However, flow field predictions used for aeroelastic analysis are not well understood for all flow regimes. The present research focuses on numerical solutions of the Euler and Navier-Stokes equations using an ADI procedure to model two-dimensional, transonic flow through oscillating cascades. The model prescribes harmonic pitching motions for the blade sections for both zero and non-zero inter-blade phase angles. The code introduces the use of a deforming grid technique for convenient specification of the periodic boundary conditions. Approximate nonreflecting boundary conditions have been coded for the inlet and exit boundary conditions. Sample unsteady solutions have been performed for an oscillating cascade and compared to experimental data. Also, test cases were fun for a flat plate cascade to compare with an unsteady, small-perturbation, subsonic analysis. The predictions for oscillating cascades with non-zero inter-blade phase angles are in good agreement with experimental data and small-perturbation theory. The zero degree inter-blade phase angle cases, which were near a resonant condition, differ from the experiment and theory. Studies on reflecting versus non-reflecting inlet and exit boundary conditions show that the treatment of the boundary can have a significant effect on the first harmonic, unsteady pressure distributions for certain flow conditions. This code is expected to be used as a tool for reviewing simpler models that do not include the full nonlinear aerodynamics or as a final check for designs against flutter in turbomachinery.

Huff, Dennis L.↗
DOE OSTI2021

Identification of crystal plasticity model parameters by multi-objective optimization integrating microstructural evolution and mechanical data

Crystal plasticity models evolve a polycrystalline yield surface using meso-scale descriptions of deformation mechanisms. The activation of deformation mechanisms is governed by crystallography and a set of model parameters, which are typically calibrated through the fitting of mechanical data such as stress–strain curves and elastic lattice strains. Microstructural data such as phase fractions and texture evolution are used for verifying crystal plasticity parameters. In this study, we use a multi-objective genetic algorithm to identify hardening parameters from flow stress curves with an option to incorporate texture into the optimization approach. Robust, generalized objective functions are developed and used to identify sets of parameters pertaining to dislocation density-based hardening laws in visco-plastic and elasto-plastic self-consistent (VPSC and EPSC) homogenization models. First, the parameters are identified for pure Nb directly from texture using an objective function based on generalized spherical harmonics. Since texture evolution is driven by the relative contribution of active slip systems, the parameters governing the evolution of slip resistance ratios can be recovered from fitting discrete textures at a series of strains. Next, a comprehensive set of load reversal data for dual phase (DP) 780 steel is used to fit a hardening law and a back-stress law in EPSC. Finally, parameters pertaining to a complex hardening law for the evolution of slip and twinning in pure α-Ti are identified. Remarkably, using texture as an objective in combination with stress–strain objectives constrains the model of Ti to fully reproduce not only stress–strain and texture evolution but also hierarchical twinning measurements as a function of initial grain size and texture. Furthermore, given an appropriate model fit to representative experimental texture evolution, underlying twin volume fractions contributing to texture evolution can be predicted.

42 ENGINEERING↗