Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conclusions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Paper or Plastic? Multiscale Material Handling Properties of Two Model Municipal Solid Waste Streams

Purpose: Municipal Solid Waste (MSW) is a potentially valuable sustainable feedstock for fuel and chemical production due to its carbon-rich content and low cost. This study aims to assess the material handling properties of paperand plastic-rich MSW feedstocks to mitigate equipment failure and processing downtime. Methods: The material handling properties of crumbled MSW feedstocks were measured using apowder rheometer with mass flow hopper calculations to assess handling performance. Inverse gas chromatography was use to measure the surface energy differences between feedstocks. Electron microscopy and Raman spectroscopy was used to evaluate microscale features that may contribute to material handling differences. Results: Plastic and paper rich feedstocks crumbled to a nominal 2 mm particle size were observed to have similar flow and handling characteristics with reasonable hopper outlets. 2 mm plastic rich crumbles, with their higher bulk density, exhibited superior flow performance. By contrast, 4 mm material required significantly larger hopper outlets, indicating poor flowability. Paper rich and 4 mm plastic rich samples displayed broad particle size distributions, which contributed to particle interlocking, jamming, and other flow issues. Electron microscopy revealed that plastic rich samples were significantly smoother, enhancing their flowability compared to the rougher, paper rich materials. Conclusions: This study establishes critical material handling baselines for processing MSW as a viable feedstock for fuel and chemical production. The findings highlight the importance of optimizing particle size and feedstock composition to improve flowability and handling performance.

09 BIOMASS FUELS↗
DOE OSTI2023

Review of quantitative methods to assess impacts of changing climate and socioeconomic conditions on Arctic transportation systems

Rapid climate and socioeconomic changes are transforming Arctic human- Earth systems. An integral part of these systems is mobility, which encompasses the transport of humans and goods into, out of, and between Arctic regions. Impacts of climate and socioeconomic drivers on Arctic mobility are heterogenous. Methodologies are needed to quantify these impacts in measures that can be linked with broader socioeconomic systems. This article reviews existing such methods and organizes them into a conceptual framework to understand trends and gaps in the literature. We found methods quantifying impacts of a range of climate drivers on most transportation modes present in the Arctic, but few methods focused on socioeconomic drivers. Also underrepresented were methods explicitly considering adaptive capacity of transportation systems. In conclusion, we provide insight into the data and relationships relevant to understanding impacts of Arctic change on transportation systems and how these impacts fit into broader human- Earth systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Reductive catalytic fractionation of cotton stalks: catalytic strategy for tuning the selectivity of phenolic monomers

Pretreatment of lignocellulosic biomass is a primary step to delink lignin from the lignin-carbohydrate complex for bioethanol production and other value-added products. Presently, these processes yield lignin (technical) with significant structural changes compared to native lignin and make it difficult to valorize. Reductive catalytic fractionation (RCF) is an advanced pretreatment process to valorize native lignin to selective phenolic monomers before capitalizing on carbohydrates. Herein, cotton stalks (CS) were pretreated with ethanol: water mixture catalyzed by bimetallic, Ru-Ni/HY (RNY) and Ru-Fe/HY (RFY), and trimetallic, Ru-Fe-Ni/HY (RFNY), catalysts using the endogenously produced H 2 . The favorable catalytic properties of the RFNY catalyst, including high reducibility, acidity, metal dispersion, the synergistic effect of all the metals, and appropriate pore and particle size resulted in the highest catalytic activity. Maximum 92% delignification efficiency was achieved with 91% holocellulose retention. The extracted lignin after depolymerization in the same step produced a 19 wt.% yield of phenolic monomers. Increasing the duration of the reaction from 2 to 6 h increased the selectivity to saturated alkyl chain phenolics (1 to 16 wt.%) at the expense of hemicellulose (50 to 9%). The fate of carbohydrates left behind after the RCF (CS-RCF) process was analyzed through enzymatic saccharification and compared with raw CS and acid-pretreated CS. In conclusion, CS-RCF yielded maximum glucose yield (45 g/L) within an incubation period of 72 h.

09 BIOMASS FUELS↗
DOE OSTI2021

Accurate Effective Stress Measures: Predicting Creep Life for 3D Stresses Using 2D and 1D Creep Rupture Simulations and Data

Operating structural components experience complex loading conditions resulting in 3D stress states. Current design practice estimates multiaxial creep rupture life by mapping a general state of stress to a uniaxial creep rupture correlation using effective stress measures. The data supporting the development of effective stress measures are nearly always only uniaxial and biaxial, as 3D creep rupture tests are not widely available. This limitation means current effective stress measures must extrapolate from 2D to 3D stress states, potentially introducing extrapolation error. In this work, we use a physics-based, crystal plasticity finite element model to simulate uniaxial, biaxial, and triaxial creep rupture. Here, we use the virtual dataset to assess the accuracy of current and novel effective stress measures in extrapolating from 2D to 3D stresses and also explore how the predictive accuracy of the effective stress measures might change if experimental 3D rupture data was available. We confirm these conclusions, based on simulation data, against multiaxial creep rupture experimental data for several materials, drawn from the literature. The results of the virtual experiments show that calibrating effective stress measures using triaxial test data would significantly improve accuracy and that some effective stress measures are more accurate than others, particularly for highly triaxial stress states. Results obtained using experimental data confirm the numerical findings and suggest that a unified effective stress measure should include an explicit dependence on the first stress invariant, the maximum tensile principal stress, and the von Mises stress.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Uncertainty Quantification Framework for Predicting Material Response with Large Number of Parameters: Application to Creep Prediction in Ferritic-Martensitic Steels Using Combined Crystal Plasticity and Grain Boundary Models

This paper presents an uncertainty quantification (UQ) framework for the physics-based model prediction of material response with a large number of parameters. The application problem presented in this work is that of predicting creep in Grade 91 steel at 600°C. The material response is defined with a physically based microstructural model with constitutive equations emulating several observed phenomena in Grade 91 and embodied into an explicit geometry mesoscale finite element model for prior austenite grains and grain boundaries. Creep within the grains and in grain boundaries are represented by crystal plasticity for dislocation motion and a physics-based model for cavity growth and nucleation, respectively. The creep behavior of this material is influenced by several parameters, some of which have a wide range of variation based on experimental data. UQ combined with microstructural modeling can discover the core microstructural causes of experimental variability, leading to improved materials with lower variability in critical long-term material properties. In this study, we investigate the model's uncertainty to identify material properties that may be modified during production to increase creep life and analyze different components of the crystal plasticity model for improvements. For this purpose, a quantity of interest is defined as time to minimum creep rate, which correlates well to the creep failure of the material. A deep neural network model was trained and validated to be used as a surrogate for the finite element model. Then, a variance-based sensitivity analysis is performed on the surrogate model to find the Sobol indices of the input parameters in respect to the output quantity of interest. The Sobol indices are used to reduce the dimensionality of the model. Generalized polynomial chaos expansion is used on the reduced basis models to propagate the uncertainty from the input parameters to the quantity of interest using the deep neural network surrogate model. These results are benchmarked against uncertainty propagation using Monte Carlo simulations. In conclusion, the UQ performed through the reduced basis model captures almost all the uncertainty in the model with significantly fewer simulations, making it possible to perform the UQ directly via simulations with the finite element model rather than surrogate machine-learned models.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Anomaly Detection in Materials Digital Twins with Multiscale ICME for Additive Manufacturing

Detecting anomaly in fatigue and fracture experimental materials science is an interesting yet challenging topic. The reasons are threefold. First, the anomalous microstructure feature that gives rise to structural failure is small, sometimes in the order of 10 -7 of the interrogated volume. This, in turn, results in a highly imbalanced classification problem in machine learning (ML). Second, the consequence is high, in the sense that the test specimen is destructed in such case. Third, the convolution between microstructure stochasticity and the small probability of void nucleation, growth, and coalescence makes failure and fracture a hard-to-predict and challenging problem in materials science due to its irreproducibility, even experimentally. In this paper, we developed a materials digital twin and applied anomaly detection methods to detect voids and anomaly in additive manufacturing (AM). The materials digital twin is driven by two integrated computational materials engineering (ICME) models, which are kinetic Monte Carlo (kMC) and crystal plasticity finite element method (CPFEM). In conclusion, we demonstrated that by using anomaly detection, it is possible to detect voids and other defects in materials digital twin, which paves way for future research in integrating materials digital twin with its physical counterpart.

ICME↗
DOE OSTI2020

Machine learning a molecular Hamiltonian for predicting electron dynamics

We develop a computational method to learn a molecular Hamiltonian matrix from matrix-valued time series of the electron density. As we demonstrate for three small molecules, the resulting Hamiltonians can be used for electron density evolution, producing highly accurate results even when propagating 1,000 time steps beyond the training data. As a more rigorous test, we use the learned Hamiltonians to simulate electron dynamics in the presence of an applied electric field, extrapolating to a problem that is beyond the field-free training data. We find that the resulting electron dynamics predicted by our learned Hamiltonian are in close quantitative agreement with the ground truth. Our method relies on combining a reduced-dimensional, linear statistical model of the Hamiltonian with a time-discretization of the quantum Liouville equation within time-dependent Hartree Fock theory. In conclusion, we train the model using a least-squares solver, avoiding numerous, CPU-intensive optimization steps. For both field-free and field-on problems, we quantify training and propagation errors, highlighting areas for future development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Benchmark study of the DTU OWC chamber with both two-way and one-way absorption

This paper reports on a benchmark study based on small-scale (1:50) measurements of a single, oscillating water column chamber mounted sideways in a long flume. The geometry of the OWC chamber is extracted from a barge-like, attenuator-type floating concept “KNSwing” with 40 chambers targeted for deployment in the Danish part of the North Sea. In addition to traditional two-way energy extraction we also consider one-way energy extraction with passive venting and compare chamber response, pressures and total absorbed energy between the two methods. A blind study was established for the numerical modeling, with participants applying several implementations of weakly nonlinear potential flow theory and commercial Navier–Stokes solvers (CFD). Both compressible and incompressible models were used for the air phase. Potential flow calculations predict more energy absorption near the chamber resonance for one-way absorption than for two-way absorption, but the opposite is found from the experimental measurements. This outcome is mainly attributed to energy losses in the experimental passive valve system, but this conclusion must be confirmed by better experimental measurements. Modeling the one-way valve in CFD proved to be very challenging and only one team was able to provide results which were generally closer to the experiments. The study illustrates the challenges associated with both numerical and experimental analysis of OWC chambers. Air compressibility effects were not found to be important at this scale, even with the large volume of additional air used for the one-way case.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Hydrodynamic characterization of the coastal pioneer array ocean observing system

Ocean observation buoys require relatively small amounts of power, yet traditionally necessitate costly resupply trips for battery replacement. With the offshore location of the buoys and small power requirements, wave energy may be an effective solution for providing consistent and reliable power to support the buoy instrumentation. The US National Science Foundation Ocean Observatories Initiative (OOI) includes arrays of point absorber-like buoy systems used for ocean observation that have been deployed at multiple locations including the Southern Mid-Atlantic Bight. A study is currently underway to design a pitch resonator wave energy converter to supplement existing renewable energy generation for powering observation instrumentation. This paper details field measurements from surface moorings of the OOI Coastal Pioneer Array, which informs the subsequent development of a numerical model for the moored observation system. The model is developed in Wave Energy Converter Simulator (WEC-Sim), which leverages the Simscape multibody solver within the MATLAB/Simulink framework and linear potential flow theory to simulate the hydrodynamic interactions and multibody dynamics in 6 degrees of freedom. Multiple tuning variables are considered to produce a model for the system that matches well with empirical data (about 8% error). In conclusion, the WEC-Sim model will serve as a platform for integrating the pitch resonator wave energy converter concept and deployment preparation (detailed design including power take-off and control systems, response evaluation, etc.).

hydrodynamic modeling↗
DOE OSTI2025

Quantitative Comparisons of Image Quality for Flash X-Ray Detectors

Due to X-rays’ ability to penetrate materials, flash X-ray radiography can be used for high-speed measurements where direct optical access is not possible. Choice of detector has a pronounced impact on resulting image quality. Four different detector systems were evaluated with a 450kVp flash source to quantitatively compare image quality metrics. The scintillating digital detector had less image noise than the three different storage phosphor computed radiography detectors across all transmission levels, but lacked the spatial resolution of the computed radiography detectors. For the screens tested here, the HPX-DR digital system had the highest signal to noise ratio of 68.24 and contrast to noise ratio of 35.53, but had the lowest spatial resolution, resolving 2.5 line pairs per millimeter at 1.78% contrast. At a value of 37.59, the Flex GP imaging plate had a signal to noise value above its storage phosphor counterparts under a 450kVp flash source. For radiographic setups typically used for dynamic experiments, the Flex XL Blue and Flex HR detectors had signal to noise ratios of 18.44 and 26.56 respectively. The highest resolved spatial frequencies of the Flex GP, Flex XL Blue, and Flex HR with the flash source are 3.85, 5.00, and 3.85 line pairs per millimeter, respectively. In conclusion, the Flex GP detector had the best combination of signal to noise ratio, contrast to noise ratio, and spatial resolution under a flash source.

computed radiography↗
DOE OSTI2021

GeantV: Results from the Prototype of Concurrent Vector Particle Transport Simulation in HEP

Full detector simulation was among the largest CPU consumers in all CERN experiment software stacks for the first two runs of the Large Hadron Collider. In the early 2010s, it was projected that simulation demands would scale linearly with increasing luminosity, with only partial compensation from increasing computing resources. The extension of fast simulation approaches to cover more use cases that represent a larger fraction of the simulation budget is only part of the solution, because of intrinsic precision limitations. The remainder corresponds to speeding up the simulation software by several factors, which is not achievable by just applying simple optimizations to the current code base. In this context, the GeantV R&D project was launched, aiming to redesign the legacy particle transport code in order to benefit from features of fine-grained parallelism, including vectorization and increased locality of both instruction and data. This paper provides an extensive presentation of the results and achievements of this R&D project, as well as the conclusions and lessons learned from the beta version prototype.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Multi-physics Peridynamic Modeling of Damage Processes in Protective Coatings

Protective coatings can revolutionize the aerospace industry by providing a way to build a fuel-efficient and low-emission gas turbine engine operating at elevated temperature. Currently, significant challenges persist in the multi-physics modeling of damage processes in protective coatings exposed to the hot corrosive environment of gas turbine engine. Examples of such detrimental processes include an interface damage between different material layers forming protective coating, a formation of the through-the-thickness vertical cracks, a diffusion of oxygen and moisture through those cracks, an oxidation, and a delamination. In this paper, a feasibility of a multi-physics peridynamic model to provide insight to these detrimental processes has been demonstrated. 3-Dimensional peridynamic equations which are valid everywhere, including dynamically evolving discontinuities, have been presented. In conclusion, validation and demonstration have been shown for conduction heat transfer, reactive oxidation, and delamination of protective coating with a composition borrowed from the open literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

PDMATLAB2D: A Peridynamics MATLAB Two-dimensional Code

PDMATLAB2D is a meshfree peridynamics implementation in MATLAB suitable for simulation of two-dimensional fracture problems. The purpose of this code is twofold. First, it provides an entry-level peridynamics computational tool for educational and training purposes. Second, it serves as an accessible and easily modifiable computational tool for peridynamics researchers who would like to adapt the code for a multitude of peridynamics simulation scenarios. The current version of the code implements a bond-based brittle elastic peridynamic model and a critical stretch criterion for bond breaking. However, the code is designed to be extendable for other peridynamic models and computational features. In this paper, we provide an overview of the code structure and functions with illustrative examples. In conclusion, due to the integrated computation and postprocessing MATLAB capabilities, PDMATLAB2D can serve as an effective testbed for testing new constitutive models and advanced numerical features for peridynamics computations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Peridynamic Models for Random Media Found by Coarse Graining

Using coarse graining, the upscaled mechanical properties of a solid with small scale heterogeneities are derived. The method maps internal forces at the small scale onto peridynamic bond forces in the coarse grained mesh. These upscaled bond forces are used to calibrate a peridynamic material model with position-dependent parameters. These parameters incorporate mesoscale variations in the statistics of the small scale system. The upscaled peridynamic model can have a much coarser discretization than the original small scale model, allowing larger scale simulations to be performed efficiently. The convergence properties of the method are investigated for representative random microstructures. In conclusion, a bond breakage criterion for the upscaled peridynamic material model is also demonstrated.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Gradient synthesis of carbon quantum dots and activated carbon from pulp black liquor for photocatalytic hydrogen evolution and supercapacitor

Black liquor (BL) is a by-product of the chemical pulping industry and is mainly used as a low-value fuel; however, its potential to produce high-value products has not been fully exploited. In this study, a green and simple strategy is reported for the gradient production of Na + -functionalized carbon quantum dots (Na + -CQDs) for the first time, N and S co-doped CQDs (N/S-CQDs), and N and S co-doped KOH-activated carbon (N/S-KAC) from BL by dialysis, hydrothermal carbonization and activation-carbonization, respectively. Due to the good electron trapping ability, photoluminescence and promising up-conversion luminescence of CQDs, the hydrogen evolution efficiency of Na + -CQDs/TiO 2 and N/S-CQDs/TiO 2 photocatalysts was improved by 2.45 and 1.46 times, respectively, compared with pure TiO 2 . N/S-KAC with a high specific surface area of 2294 m 2 g -1 provides an excellent specific capacitance of 253 F g -1 at 0.5 A g -1 and a promising energy density of 26.92 Wh kg -1 under a power density of 566 W kg -1 for the fabricated symmetrical supercapacitor. Moreover, the electrode material has good cycling stability with a capacitance retention of ~ 93.91% after 5000 cycles. In conclusion, this pathway provides a versatile and scalable approach for the construction and co-production of nanostructured materials, photocatalysts and energy storage devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Chitin- and cellulose-based sustainable barrier materials: a review

Abstract The accumulation of synthetic plastics used in packaging applications in landfills and the environment is a serious problem. This challenge is driving research efforts to develop biodegradable, compostable, or recyclable barrier materials derived from renewable sources. Cellulose, chitin/chitosan, and their combinations are versatile biobased packaging materials because of their diverse biological properties (biocompatibility, biodegradability, antimicrobial properties, antioxidant activity, non-toxicity, and less immunogenic compared to protein), superior physical properties (high surface area, good barrier properties, and mechanical properties), and they can be assembled into different forms and shapes (powders, fibers, films, beads, sponges, gels, and solutions). They can be either assembled into packaging films or used as fillers to improve the properties of other biobased polymers. Methods such as preparation of composites, multilayer coating, and alignment control are used to further improve their barrier, mechanical properties, and ameliorate their moisture sensitivity. With the growing application of cellulose and chitin-based packaging materials, their biodegradability and recyclability are also discussed in this review paper. The future trends of these biobased materials in packaging applications and the possibility of gradually replacing petroleum-based plastics are analyzed in the “Conclusions” section.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Non-linear Wire Rope Isolator Model to Enhance Transportation Simulation of Fragile Equipment

Abstract Introduction Wire rope isolators are often used as means of vibration isolation for the transportation of fragile machine equipment. When deployed as suspension systems in a transportation scenario, a simple spring–damper model is often used to predict the dynamic loads that act on the structure being transported. However, this simple model has proved to be too simplistic to be used in the development of an accurate numerical model that can predict the vibration levels experienced by the inner components of fragile equipment during its transportation. This paper describes the experimental tests conducted on a wire rope isolator used for the transportation of the prototype SSR1 cryomodule. Materials and methods A hysteretic Bouc–Wen model has been used to analytically describe the force–deformation relationship of the wire rope isolators. The developed model of the isolator has been implemented in a larger model to simulate the actual transportation of the prototype SSR1 cryomodule, a section of the new PIP-II linear accelerator under construction at Fermilab. A series of multibody dynamic simulations with rigid and flexible components was used to numerically determine the acceleration of some critical components. Results and conclusions An actual experimental transportation was simulated using two numerical models: the developed Bouc–Wen model and a conventional spring–damper model. It is shown how the Bouc–Wen formulation of the isolator characteristics drastically improves the correspondence between experimental and simulated results if compared to a spring–damper model, especially in the range of 0–30 Hz which is the most critical for transportation problems.

42 ENGINEERING↗
DOE OSTI2021

Robust implementation of generative modeling with parametrized quantum circuits

Although the performance of hybrid quantum-classical algorithms is highly dependent on the selection of the classical optimizer and the circuit ansätze, a robust and thorough assessment on-hardware of such features has been missing to date. From the optimizer perspective, the primary challenge lies in the solver’s stochastic nature, and their significant variance over the random initialization. Therefore, a robust comparison requires one to perform several training curves for each solver before one can reach conclusions about their typical performance. Since each of the training curves requires the execution of thousands of quantum circuits in the quantum computer, such a robust study remained a steep challenge for most hybrid platforms available today. In this work, we leverage on Rigetti’s Quantum Cloud Services (QCS™) to overcome this implementation barrier, and we study the on-hardware performance of the data-driven quantum circuit learning (DDQCL) for three different state-of-the-art classical solvers, and on two-different circuit ansätze associated to different entangling connectivity graphs for the same task. Additionally, we assess the gains in performance from varying circuit depths. To evaluate the typical performance associated with each of these settings in this benchmark study, we use at least five independent runs of DDQCL towards the generation of quantum generative models capable of capturing the patterns of the canonical Bars and Stripes dataset. In this experimental benchmarking, the gradient-free optimization algorithms show an outstanding performance compared to the gradient-based solver. In particular, one of them had better performance when handling the unavoidable noisy objective function to be minimized under experimental conditions.

97 MATHEMATICS AND COMPUTING↗