Thermionic Diode Kinetics Experiment - Design and startup
Thermionic Diode Kinetics Experiment with on-line analog computer simulation, investigating thermionic reactor powerplant dynamics and control by nonnuclear means
Ernst, D.↗
SEARCH · Engineering Papers
Results for “computer experiment”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimental verification of computer spray-combustion models
Analytical model formulation, representing performance of spray-combustion device, is based on understanding of atomization, mixing, vaporization, and combustion which occurs in device. Report lists results of correlations of computed values with values obtained from experiments with rocket combustor. Technique offers excellent method for evaluating validity and ranges of applicability of combustion models.
Nurick, W. H.↗
Land use mapping and modelling for the Phoenix Quadrangle
The author has identified the following significant results. The land use of the Phoenix Quadrangle in Arizona had been mapped previously from aerial photographs and recorded in a computer data bank. During the ERTS experiment, changes in land use were detected, first with the ERTS-simulation photographs, then with the ERTS-1 images when they became available. In each case, the I2S color additive viewer was used as the primary image enhancement tool, operated in a multispectral mode. A search was made for a method of creating hard copy color composite images of the best combinations of multiband composites from ERTS-1, mostly by photographic and diazo processes. The I2S viewer was also used to enhance changes between successive images by quick flip techniques or by registering with different color filters. Improved interpretation of land use change resulted, and a map of changes in the Phoenix Quadrangle was compiled using magnified ERTS-1 images alone. The first level of a standard land use classification system was successfully used. Between the ERTS-1 images for August and November, some differences were detected that could be caused by seasonal characteristics of vegetation or by change in use.
Place, J. L.↗
An experimental and numerical investigation of shock-wave induced turbulent boundary-layer separation at hypersonic speeds
An experiment designed to test and guide computations of the interaction of an impinging shock wave with a turbulent boundary layer is described. Detailed mean flow-field and surface data are presented for two shock strengths which resulted in attached and separated flows, respectively. Numerical computations, employing the complete time-averaged Navier-Stokes equations along with algebraic eddy-viscosity and turbulent Prandtl number models to describe shear stress and heat flux, are used to illustrate the dependence of the computations on the particulars of the turbulence models. Models appropriate for zero-pressure-gradient flows predicted the overall features of the flow fields, but were deficient in predicting many of the details of the interaction regions. Improvements to the turbulence model parameters were sought through a combination of detailed data analysis and computer simulations which tested the sensitivity of the solutions to model parameter changes. Computer simulations using these improvements are presented and discussed.
Marvin, J. G.↗
Image Data Processing System (IDAPS) user manual, S-056 experiment. Volume 1: System description. Volume 2: Batch IDAPS. Volume 3: Interactive IDAPS
Image data processing system (IDAPS) developed to satisfy the image processing requirements of the Skylab S-056 experiment is described. The S-056 experiment was designed to obtain high-resolution photographs of the sun in the far ultraviolet, or soft X-ray, portion of the electromagnetic spectrum. Thirty-five thousand photographs were obtained by the three flights of the program; and, faced with such a massive volume of imagery, the designers of the experiment decided to develop a computer-based system which would reduce the image processing workload. The purpose of the IDAPS User Manual is to give the IDAPS user the necessary information and instructions to effectively utilize the system.
Source record↗
Relativistic information of the GPS-NAVSTAR position determination algorithm
The use of satellite proper time as integration variable and space time correlation handling were examined for means to reduce computational requirements. Implementation architectures were discussed with emphasis on minimization of computer configuration hardware requirements. Selected benchmark experiment results are presented to size processor requirements for achieving GPS-NAVSTAR navigation accuracies in both the user and control segments.
Baer, W.↗
Computer/experiment integration for unsteady aerodynamic research
The use of a minicomputer for the acquisition and analysis of unsteady aerodynamic data is described. Some of the novel features of the system include: on-line digitization, a signal-averaging algorithm, Fourier decomposition, graphical display, and on-line theoretical computations to compare with the ongoing experiment. The system's capabilities are described using some data from a recently completed oscillating airfoil experiment.
Davis, S. S.↗
A numerical simulation of hypersonic viscous flow over arbitrary geometries at angle of attack
An implicit conservative, noniterative, finite-difference algorithm that predicts the supersonic, laminar or turbulent viscous flow about arbitrary geometries at large angles of attack is presented. The three-dimensional parabolized form of the thin-layer Navier-Stokes equations are written in generalized coordinates. These equations are solved using the delta form of the Beam-Warming implicit algorithm. Flow field simulations have been obtained for a blunt biconic with windward and leeward cuts and an X-24C lifting body for both laminar and turbulent flow at various Mach numbers and angles of attack. When compared with experiment or with previous theories, these computational predictions show good agreement.
Chaussee, D. S.↗
Algorithms for real-time flutter identification
The work reported here addresses the important algorithm issues necessary to achieve a real-time flutter monitoring system; namely, the guidelines for choosing appropriate model forms, reduction of the parameter convergence transient, handling multiple modes, the effect of overparameterization, and estimate accuracy predictions, both online and for experiment design. An approach for efficiently computing continuous-time flutter parameter Cramer-Rao estimate error bounds has been developed. This enables a convincing comparison of theoretical and simulation results, as well as off-line studies in preparation for a flight test. Theoretical predictions, simulation and flight test results from the NASA/Dryden Drones for Aerodynamic and Structural Test (DAST) Program are compared.
Walker, R. A.↗
A mixing-length model for the prediction of convex curvature effects on turbulent boundary layers
A mixing-length model is developed for the prediction of turbulent boundary layers with convex streamwise curvature. For large layer thickness ratio, delta/R greater than 0.05, the model scales mixing length on the wall radius of curvature, R. For small delta/R, ordinary flat wall modeling is used for the mixing-length profile with curvature corrections, following the recommendations of Eide and Johnston (1976). Effects of streamwise change of curvature are considered; a strong lag from equilibrium is required when R increases downstream. Fifteen separate data sets were compared, including both hydrodynamic and heat transfer results. Six of these computations are presented and compared to experiment.
Adams, E. W.↗
Experiments suitable for wind tunnel wall interference assessment/correction
Three experiments suitable for wall interference assessment and evaluation of proposed correction methods are presented. The experiments are: (1) a series of airfoil tests using a newly designed transonic flow facility that employs side-wall boundary layer suction and upper- and lower-wall shaping; (2) tests on a swept airfoil section spanning a solid-wall wind tunnel with fixed contouring on all four walls; and (3) tests on a swept wing of aspect ratio 3 mounted in a solid-wall wind tunnel with fixed flat walls. Each of the experiments provides data on the airfoil sections as well as on the wind tunnel walls. All the experiments were performed in solid wall wind tunnels corrected for boundary layer displacement effects. Although the experiments were performed primarily to evaluate computer code performance, it is believed that they also provide information that can be used to evaluate methods for assessing and correcting wall interference effects.
Marvin, J. G.↗
Proceedings of Tenth Annual Software Engineering Workshop
Papers are presented on the following topics: measurement of software technology, recent studies of the Software Engineering Lab, software management tools, expert systems, error seeding as a program validation technique, software quality assurance, software engineering environments (including knowledge-based environments), the Distributed Computing Design System, and various Ada experiments.
Source record↗
Anisotropic responses to motion toward and away from the eye
When a rigid object moves toward the eye, it is usually perceived as being rigid. However, in the case of motion away from the eye, the motion and structure of the object are perceived nonveridically, with the percept tending to reflect the nonrigid transformations that are present in the retinal image. This difference in response to motion to and from the observer was quantified in an experiment using wire-frame computer-generated boxes which moved toward and away from the eye. Two theoretical systems are developed by which uniform three-dimensional velocity can be recovered from an expansion pattern of nonuniform velocity vectors. It is proposed that the human visual system uses two similar systems for processing motion in depth. The mechanism used for motion away from the eye produces perceptual errors because it is not suited to objects with a depth component.
Perrone, John A.↗
An advisory system for predicting and resolving airspace violations based on four-dimensional guidance techniques
New heuristics are integrated with four-dimensional guidance techniques developed by NASA in order to automate the prediction and resolution of airspace violations, and three rules are derived to reduce the amount of computation time for conflict detection. Controller experience has been used to establish techniques for resolving potential conflicts including speed control, altitude maneuvers, and horizontal flight maneuvers. Current aircraft states, flight plans, and extrapolation of aircraft trajectories are used to synthesize four-dimensional trajectories, and the state of the air traffic and the interaction between aircraft are projected into the future using the four-dimensional algorithms. The situation is immediately updated to incorporate any new information. Potential conflicts among multiple aircraft are resolved by fast sequential resolution of potential conflicts between aircraft pairs, one at a time.
Lee, Homer Q.↗
Satellite formation in capillary jet breakup
Computations of finite-amplitude, spatially periodic wave growth on a cylindrical jet have been carried out using a boundary integral method. The initial wave growth is in agreement with Rayleigh's linear theory. When followed to completion these waves pinch off large drops separated by smaller satellite drops (spherules) that decrease in size with decreasing wavelength. The computed sizes of both drops and satellites agree with experiment. It is found that satellites will form for all unstable wave numbers. The small satellites that are computed at wave numbers near the critical wave number were not predicted by near-linear analysis but are observed in experimental photographs of jet breakup. Computation of the collapse of elongated satellites shows short waves propagating on their surfaces.
Mansour, Nagi N.↗
Aeroassist flight experiment aerodynamics and aerothermodynamics
The problem is to determine the transitional flow aerodynamics and aerothermodynamics, including the base flow characteristics, of the Aeroassist Flight Experiment (AFE). The justification for the computational fluid dynamic (CFD) Application stems from MSFC's system integration responsibility for the AFE. To insure that the AFE objectives are met, MSFC must understand the limitations and uncertainties of the design data. Perhaps the only method capable of handling the complex physics of the rarefied high energy AFE trajectory is Bird's Direct Simulation Monte Carlo (DSMC) technique. The 3-D code used in this analysis is applicable only to the AFE geometry. It uses the Variable Hard Sphere (VHS) collision model and five specie chemistry model available from Langley Research Center. The code is benchmarked against the AFE flight data and used as an Aeroassisted Space Transfer Vehicle (ASTV) design tool. The code is being used to understand the AFE flow field and verify or modify existing design data. Continued application to lower altitudes is testing the capability of the Numerical Aerodynamic Simulation Facility (NASF) to handle 3-D DSMC and its practicality as an ASTV/AFE design tool.
Brewer, Edwin B.↗
Research briefing on contemporary problems in plasma science
An overview is presented of the broad perspective of all plasma science. Detailed discussions are given of scientific opportunities in various subdisciplines of plasma science. The first subdiscipline to be discussed is the area where the contemporary applications of plasma science are the most widespread, low temperature plasma science. Opportunities for new research and technology development that have emerged as byproducts of research in magnetic and inertial fusion are then highlighted. Then follows a discussion of new opportunities in ultrafast plasma science opened up by recent developments in laser and particle beam technology. Next, research that uses smaller scale facilities is discussed, first discussing non-neutral plasmas, and then the area of basic plasma experiments. Discussions of analytic theory and computational plasma physics and of space and astrophysical plasma physics are then presented.
Source record↗
Analysis and experimental evaluation of a Stewart platform-based force/torque sensor
The kinematic analysis and experimentation of a force/torque sensor whose design is based on the mechanism of the Stewart Platform are discussed. Besides being used for measurement of forces/torques, the sensor also serves as a compliant platform which provides passive compliance during a robotic assembly task. It consists of two platforms, the upper compliant platform (UCP) and the lower compliant platform (LCP), coupled together through six spring-loaded pistons whose length variations are measured by six linear voltage differential transformers (LVDT) mounted along the pistons. Solutions to the forward and inverse kinematics of the force sensor are derived. Based on the known spring constant and the piston length changes, forces/torques applied to the LCP gripper are computed using vector algebra. Results of experiments conducted to evaluate the sensing capability of the force sensor are reported and discussed.
Nguyen, Charles C.↗