Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Aerosol-Cloud-Precipitation Interactions over Indo-Gangetic Basin

About 60% of world population reside in Asia, in term of which sheer population density presents a major environmental stress. Economic expansion in this region is, in fact, accompanied by increases in bio-fuel burning, industrial pollution, and land cover and land use changes. With a growth rate of approx. 8%/yr for Indian economy, more than 600 million people from Lahore, Pakistan to Calcutta, India over the Indo-Gangetic Basin have particularly witnessed increased frequencies of floods and droughts as well as a dramatic increase in atmospheric loading of aerosols (i.e., anthropogenic and natural aerosol) in recent decades. This regional change (e.g., aerosol, cloud, precipitation, etc.) will constitute a vital part of the global change in the 21st century. Better understanding of the impacts of aerosols in affecting monsoon climate and water cycles is crucial in providing the physical basis to improve monsoon climate prediction and for disaster mitigation. Based on climate model simulations, absorbing aerosols (dust and black carbon) play a critical role in affecting interannual and intraseasonal variability of the Indian monsoon. An initiative on the integrated (aerosols, clouds, and precipitation) measurements approach over the Indo-Gangetic Basin will be discussed. An array of ground-based (e.g., AERONET, MPLNET, SMART-COMMIT, etc.) and satellite (e.g., Terra, A-Train, etc.) sensors will be utilized to acquire aerosol characteristics, sources/sinks, and transport processes during the pre-monsoon (April-May, aerosol forcing) season, and to obtain cloud and precipitation properties during the monsoon (May-June, water cycle response) season. Close collaboration with other international programs, such as ABC, CLIVAR, GEWEX, and CEOP in the region is anticipated.

Tsay, S.-C.↗
NASA NTRSDate not supplied

A Model for Ice Accretion Roughness Evolution and Spatial Variations

Over the past decade, multiple investigations of ice accretion roughness and spatial variations have been performed in the Icing Research Tunnel (IRT) at the NASA Glenn Research Center. The early investigations used models of NACA 0012 airfoils with different chord sizes and focused on temporal scaling and primary cloud scaling parameters such as stagnation point collection efficiency. Subsequent investigations included the effects of model sweep, airfoil shape, airfoil lifting condition, and freestream static temperature. To develop a predictive model for roughness evolution in generalized icing situations, the maximum roughness values for the airfoils and conditions used in the angle of attack and freestream temperature investigations were scaled to eliminate the temporal variations. LEWICE simulations were employed to identify the local collection efficiency at the locations of maximum roughness, and a two-dimensional panel-method code was used to identify the local static pressure at the location of the maximum roughness. Because of the stochastic nature of ice accretion roughness, a physics-directed approach was employed to develop a multi-dimensional correlation based on the local pressure coefficient, the local total temperature, the cloud properties, and the cloud exposure time. The resulting correlation predictions are compared to ice shapes measured in the IRT for both a 21-in. NACA 0012 airfoil model and a 60-in. HAARP-II model. The resulting predictions indicate that the local freezing fraction must be included in the roughness predictive model. Implications regarding icing heat transfer predictions using the resulting roughness model are also discussed.

Icing↗
NASA NTRS1995

Physical properties of the OMC-2 and OMC-3 cores from CS and C(18)O observations

We have investigated the properties of the OMC-2 and OMC-3 cores in the Orion giant molecular cloud using high spatial spectral resolution observations of several transitions of the (13)CO, C(18)O, C(S-32) and C(S-34) molecules taken with the SEST telescope. The OMC-2 core consists of one clump (22 solar mass) with a radius of 0.11 pc surrounded by a cluster of 11 discrete infrared sources. The H2 column density and volume density in the center of this clump are 2 x 10(exp 22)/sq cm and 9 x 10(exp 5)/cu cm respectively. From a comparison between physical parameters derived from C(18)O and C(S-32) observations we conclude that the molecular envelope around the core has been completely removed by these sources and that only the very dense gas is left. OMC-3 shows a more complex elongated structure in C(18)O and CS than OMC-2. The C(S-32) and C(S-34) maps show that the denser region can be separated into at least sub-cores of roughly equal sizes (radius approximately equals 0.13 pc), with n(H2) = 6 x 10(exp 5)/cu cm, and a mass of 10 solar mass (from C(S-32)). The very different masses obtained for the central core from C(18)O and C(S-32) (55 and 12 solar mass respectively) indicate that a massive envelope is still present around the very dense sub-cores. We report the first detection of several molecular outflows in OMC-3. The presence of an IRAS source and the first detection of these outflows confirm that star formation is going on in OMC-3. Based on the different physical properties of these regions compared with OMC-1, OMC-2 appears to be in an intermediate evolutionary stage between OMC-1 and OMC-3.

Castets, A.↗
NASA NTRS2011

The Impact of Microphysical Schemes on Hurricane Intensity and Track

During the past decade, both research and operational numerical weather prediction models [e.g. the Weather Research and Forecasting Model (WRF)] have started using more complex microphysical schemes originally developed for high-resolution cloud resolving models (CRMs) with 1-2 km or less horizontal resolutions. WRF is a next-generation meso-scale forecast model and assimilation system. It incorporates a modern software framework, advanced dynamics, numerics and data assimilation techniques, a multiple moveable nesting capability, and improved physical packages. WRF can be used for a wide range of applications, from idealized research to operational forecasting, with an emphasis on horizontal grid sizes in the range of 1-10 km. The current WRF includes several different microphysics options. At NASA Goddard, four different cloud microphysics options have been implemented into WRF. The performance of these schemes is compared to those of the other microphysics schemes available in WRF for an Atlantic hurricane case (Katrina). In addition, a brief review of previous modeling studies on the impact of microphysics schemes and processes on the intensity and track of hurricanes is presented and compared against the current Katrina study. In general, all of the studies show that microphysics schemes do not have a major impact on track forecasts but do have more of an effect on the simulated intensity. Also, nearly all of the previous studies found that simulated hurricanes had the strongest deepening or intensification when using only warm rain physics. This is because all of the simulated precipitating hydrometeors are large raindrops that quickly fall out near the eye-wall region, which would hydrostatically produce the lowest pressure. In addition, these studies suggested that intensities become unrealistically strong when evaporative cooling from cloud droplets and melting from ice particles are removed as this results in much weaker downdrafts in the simulated storms. However, there are many differences between the different modeling studies, which are identified and discussed.

Tao, Wei-Kuo↗
NASA NTRS2018

Investigating Extreme Events in the NASA GEOS Multiscale Modeling System

Advances in computing capabilities and scientific development have come together to evolve general circulation models into multi-scale Earth system modeling tools. The Goddard Earth Observing System (GEOS) model is one such example of this evolution. The GEOS model is driven by the finite-volume cubed-sphere (FV3) non-hydrostatic dynamical core. Surrounding FV3 is a scale-aware physics package and data assimilation capability permitting multi-scale application of GEOS for sub-seasonal to seasonal climate prediction, medium range weather prediction, and global mesoscale modeling at convection allowing resolutions. GEOS also includes a comprehensive chemistry package representing a range of capabilities from basic chemistry and interactve aerosols and gaseous species, to carbon emissions and uptake, and complex ozone photochemistry. In this study, we apply the GEOS model to study the fidelity of these processes with increasing horizontal resolution and scale-aware processes in GEOS on extreme events. The GEOS model is run for 40-days beginning in August 2016 at three uniform global resolutions of 13-km (c768), 6-km (c1536) and 3-km (c3072) with 72 vertical levels up to 0.01mb. The model physics use the Grell-Freitas scale-aware convection scheme to dynamically reduce the role of parameterized deep convection as resolved scale processes in the model take over at higher resolutions. We will include high-resolution global emissions and fluxes of aerosols and carbon downscaled from recent satellite observations. We will compare these simulations with reanalyses and observations, focusing on rainfall, clouds and radiative forcing at hourly to monthly timescales. We will closely examine the probability distribution of precipitation intensities and radiative properties of clouds on a daily time scale. In addition, we will focus on extreme events, in particular the diurnal cycle of convection over the US and the frequency and physical nature of organized convection and heavy rain events across the globe.

Putman, William↗
NASA NTRS2021

Solving Global Cirrus Cloud Top-of-the-Atmosphere Radiative Forcing from Satellite Lidar

We estimate top-of-the-atmosphere (TOA) cirrus cloud radiative forcing from satellite lidar observations. We describe the technical innovations necessary to conduct this experiment. Specifically, we highlight advances in broadband radiative transfer modeling, and the optical and physical parameterizations necessary to run them. We present two years of results, across two decades (2008 vs. 2018), highlighting seasonal and annual differences. The goal of this endeavor is to standardize mechanics for transitioning this work to operational Level 2 ground and satellite lidar products moving forward. However, the unique TOA forcing characteristics of cirrus clouds are also discussed, including specifically daytime characteristics than can oscillate between warming and cooling regionally.

James R Campbell↗
NASA NTRS1997

Destruction of Interstellar Dust

Interstellar dust is an important component of the interstellar medium. Dust grains are the dominant opacity source and thus regulate the radiative transfer in the interstellar medium. Besides the spectral characteristics of sources, dust therefore influences directly the molecular composition of clouds through photodissociation and the heating of the gas through the photoelectric effect. Furthermore, dust grains also provide surfaces for active chemistry. This paper will review the destruction of interstellar dust with an emphasis on processing by interstellar shocks. Interstellar dust is affected by a variety of processes. Stars in the late stages of their evolution form dust grains by chemical nucleation and growth and injected them into the ISM. Grains in the ISM are processed by strong shock waves which sputter, vaporize, diamondize, and shatter them. The physics of interstellar shock waves and of these destruction processes will be reviewed. The ISM is organized in a number of phases: HI and molecular clouds, warm (neutral/ionized) intercloud medium, and coroner gas. Dust destruction is dominated by supernova shock waves in the intercloud medium. Because of rapid exchange of dust and gas between the phases, the effects of this are felt through all phases. This will be briefly discussed.

Tielens, A. G. G. M.↗
NASA NTRS1996

The Physics of Molecular Shocks in Star-Forming Regions

Molecular shocks are produced by the impact of the supersonic infall of gas and dust onto protostars and by the interaction of the supersonic outflow from the protostar with the circumstellar material. Infalling gas creates an accretion shock around the circumstellar disk which emits a unique infrared spectrum and which processes the interstellar dust as it enters the disk. The winds and jets from protostars also impact the disk, the infalling material, and the ambient molecular cloud core creating shocks whose spectrum and morphology diagnose the mass loss processes of the protostar and the orientation and structure of the star forming system. We discuss the physics of these shocks, the model spectra derived from theoretical models, and comparisons with observations of H2O masers, H2 emission, as well as other shocks tracers. We show the strong effect of magnetic fields on molecular shock structure, and elucidate the chemical changes induced by the shock heating and compression.

Hollenbach, David↗
NASA NTRSDate not supplied

TPSAS-NF1676L-13393-DND

In the two plus decades since it became evident that polar stratospheric clouds (PSCs) play a major role in the springtime depletion of polar ozone, the detailed composition and morphology of PSCs has been an area of interest. Although our PSC knowledge base is substantial, there is still considerable uncertainty in specific key areas related to their composition and formation. Probably the least well understood of these is the nucleation process responsible for the formation of nitric acid trihydrate (NAT) particles and the circumstances under which NAT formation and growth leads to stratospheric denitrification. CALIOP (Cloud-Aerosol LIdar with Orthogonal Polarization) is an excellent instrument for observing PSCs and has already produced an extensive set of PSC observations with unprecedented spatial and temporal resolution covering five winters. These observations are providing new insight into the key remaining questions regarding PSC composition and formation mechanisms. In this paper, we examine the CALIOP PSC observations in combination with a microphysical model in attempt to better understand the underlying physical mechanisms for NAT nucleation. Of particular interest is the early phase of the 2009-2010 Arctic winter when CALIOP frequently observed extended regions of tenuous NAT clouds, clearly before ice was present in the polar vortex. This provides unprecedented large-scale evidence that ice particles are not the only nuclei on which NAT may form. Microphysical model calculations along backward trajectories from these CALIOP NAT cloud observations are used to investigate possible ice-independent, heterogeneous NAT nucleation mechanisms. These analyses will then be expanded to other winters to assess the overall significance of an ice-independent nucleation mechanism for NAT PSCs.

M C Pitts↗
NASA NTRS2023

A 1D Model for Nucleation of Ice From Aerosol Particles: An Application to a Mixed-Phase Arctic Stratus Cloud Layer

Mixed-phase clouds (MPCs) have been identified as significant contributors to uncertainties in climate projections, attributable to model representation of processes controlling the formation and loss of supercooled water droplets and ice particles from the atmosphere. Arctic MPCs are commonly widespread and long-lived, with sustained ice crystal formation processes that challenge current understanding. This study examines the ice-nucleating particle (INP) reservoir dynamics governing immersion-mode heterogeneous freezing in an observed case of Arctic MPCs using a simplified 1D aerosol-cloud model. The model setup includes prescribed dynamical forcings and thermodynamic profiles, and represents INPs as multicomponent and polydisperse particle size distributions. Diagnostic and prognostic approaches to immersion freezing parameterization are compared, including time-independent (singular) number- and surface area-based descriptions and a time-dependent description following classical nucleation theory (CNT). The choice of freezing parameterization defines the size of the INP reservoir. The CNT-based description yields an orders of magnitude larger INP reservoir than the singular parameterizations, which is the dominant factor for sustained ice crystal formation. The efficiency of the freezing process and cloud cooling are of secondary importance. A diagnostic treatment neglecting INP loss is only accurate when the INP reservoir size is large and INP depletion weak. Since a larger INP reservoir sustains ice crystal formation substantially longer, and ice water path scales with ice crystal concentrations for the conditions considered, resolving the source of differences in INP reservoir dynamics due to model implementation is a high priority for advancing climate model physics.

aerosol↗
NASA NTRS2006

The Impact of Microphysics on Intensity and Structure of Hurricanes

During the past decade, both research and operational numerical weather prediction models, e.g. Weather Research and Forecast (WRF) model, have started using more complex microphysical schemes originally developed for high-resolution cloud resolving models (CRMs) with a 1-2 km or less horizontal resolutions. WFW is a next-generation mesoscale forecast model and assimilation system that has incorporated modern software framework, advanced dynamics, numeric and data assimilation techniques, a multiple moveable nesting capability, and improved physical packages. WFW model can be used for a wide range of applications, from idealized research to operational forecasting, with an emphasis on horizontal grid sizes in the range of 1-10 km. The current WRF includes several different microphysics options such as Lin et al. (1983), WSM 6-class and Thompson microphysics schemes. We have recently implemented three sophisticated cloud microphysics schemes into WRF. The cloud microphysics schemes have been extensively tested and applied for different mesoscale systems in different geographical locations. The performances of these schemes have been compared to those from other WRF microphysics options. We are performing sensitivity tests in using WW to examine the impact of six different cloud microphysical schemes on hurricane track, intensity and rainfall forecast. We are also performing the inline tracer calculation to comprehend the physical processes @e., boundary layer and each quadrant in the boundary layer) related to the development and structure of hurricanes.

Tao, Wei-Kuo↗
NASA NTRS2015

TPSAS-NF1676L-22800-DND

This lecture will provide an overview of an advanced turbulence closure scheme used in cloud-resolving models (CRMs) and climate modeling effort with the superparameterization approach. The CRM is embedded into each atmospheric column of a climate model as a super parameterization. It replaces the traditional subgrid-scale physical parameterizations in a conventional climate model. Two sensitivity simulations with doubling of CO2 and an increase of sea surface temperature, respectively, are performed and compared to similar simulations without this advanced turbulence closure in CRM to better understand the role of low-level clouds in climate sensitivity.

Kuan-Man Xu↗
NASA NTRS1978

The Galilean satellites of Jupiter - Four worlds

A broad survey is presented of our current knowledge of the Galilean satellites. Attention is given to the physical properties (size, masses, densities, and rotation) and to the surface properties (albedo, surface markings, composition, and physical state) of the satellites. In particular, Io's atmosphere is considered with emphasis on the sodium, hydrogen and sulfur clouds and the ionosphere. The atmospheres of the other satellites are examined briefly and consideration is given to models of planetary origin, evolution and interior structure.

Johnson, T. V.↗
NASA NTRS1984

Water Vapor Profile Retrievals from the HIRS/MSU Satellite Sounder

The objective of this research is to develop a method for the retrieval of atmospheric water vapor profiles within the context of the GLAS physically based retrieval scheme. The GLAS retrieval method is currently capable of producing accurate atmospheric temperature retrievals as well as cloud fields and retrieved surface properties such as temperature and microwave emissivity. In the GLAS retrieval scheme, the water vapor field used in the computation of the atmospheric transmittance functions is obtained from a 6 hour forecast and is not modified in the retrieval process. Improved estimates of the water vapor field, in addition to being in themselves variables of meteorological interest, may, therefore, result in improved estimates of the other retrieved parameters obtained from the system.

Reuter, D.↗
NASA NTRS1991

A survey for infrared excesses among high galactic latitude SAO stars

This project involves extending the previous analysis of infrared excesses among a volume-limited sample of 134 nearby A-K main-sequence stars to a magnitude-limited sample of stars, culled from the SAO Catalog, with excesses determined from the IRAS Point Source Catalog flux density ratios. This new sample includes 5706 B-M type stars, 379 of which have infrared excesses. The objective involved use of a statistically complete survey of objects in a standard catalog in order to assess the frequency with which different physical processes can affect the infrared output of stars. These processes include, but are not limited to, orbiting cold particle clouds and the onset of rapid mass loss. It is concluded that cold disks are consistent with the infrared excesses found among A-G dwarfs and G-K giants in the sample.

Stencel, Robert E.↗
NASA NTRS1999

Computer Modeling of Sand Transport on Mars Using a Compart-Mentalized Fluids Algorithm (CFA)

It has been postulated that aeolian transport on Mars may be significantly different from that on Earth. From laboratory experiments simulating martian grain transport [2], it has been observed that (saltating) grains striking the bed can cause hundreds of secondary reptation trajectories when impact occurs at speeds postulated for Mars. Some of the ballistically induced trajectories "die ouf' and effectively join the ranks on the creep population that is merely nudged along by impact. Many of the induced reptation trajectories, however, are sufficiently high for the grains to become part of the saltation load (it is irrelevant to the boundary layer how a grain attained its initial lift force). When these grains, in turn, strike the surface, they too are capable of inducing more reptating grains. This cascading effect has been discussed in connection with terrestrial aeolian transport in an attempt to dispel the notion that sand motion is divisible only into creep and saltation loads. On Earth, only a few grains are splashed by impact. On Mars, it may be hundreds. We developed a computer model to address this phenomenon because there are some important ramifications: First, this ratio may mean that martian aeolian transport is dominated by reptation flux rather than saltation. On Earth, the flux would be a roughly balanced mixture between reptation/creep and saltation. On Venus, there would be no transport other than by saltation. In other words, an understanding of planetary aeolian processes may not be necessarily understood by extrapolating from the "Earth case", with only gravity and atmospheric density/viscosity being considered as variables. Second, the reptation flux on Mars may be self sustaining, so that little input is required by the wind once transport has been initiated. The number of grains saturating the boundary layer near the bed may mean that average grain speed on Mars might conceivably be less than that on Earth. This would say much for models of sand comminution on Mars. A multiple-grain transport model using just the equations of grain motion describing lift and drag is impossible to develop owing to stochastic effects --the very effects we wish to model. Also, unless we were to employ supercomputing techniques and extremely complex computer codes that could deal with millions of grains simultaneously, it would also be difficult to model grain transport if we attempted to consider every grain in motion. No existing computer models were found that satisfactorily used the equations of motion to arrive at transport flux numbers for the different populations of saltation and reptation. Modeling all the grains in a transport system was an intractable problem within our resources, and thus we developed what we believe to be a new modeling approach to simulating grain transport. The CFA deals with grain populations, but considers them to belong to various compartmentalized fluid units in the boundary layer. In this way, the model circumvents the multigrain problem by dealing primarily with the consequences of grain transport --momentum transfer between air and grains, which is the physical essence of a dynamic grain-fluid mixture. We thus chose to model the aeolian transport process as a superposition of fluids. These fluids include the air as well as particle populations of various properties. The prime property distinguishing these fluids is upward and downward grain motion. In a normal saltation trajectory, a grain's downwind velocity increases with time, so a rising grain will have a smaller downwind velocity than a failing grain. Because of this disparity in rising and falling grain proper-ties, it seemed appropriate to track these as two separate grain populations within the same physical space. The air itself can be considered a separate fluid superimposed within and interacting with the various grain-cloud "fluids". Additional informaiton is contained in the original.

Marshall, J.↗
NASA NTRS2008

NASA's Earth Observations of the Global Environment: Our Changing Planet and the View from Space

Observations of the Earth from space over the past 30 years has enabled an increasingly detailed view of our Earth's atmosphere, land, oceans, and cryosphere, and its many alterations over time. With the advent of improvements in technology, together with increased understanding of the physical principles of remote sensing, it is now possible to routinely observe the global distribution of atmospheric constituents, including both cloud and aerosol optical properties, land surface reflectance, sea ice and glaciers, and numerous properties of the world's oceans. This talk will review the current status of recent NASA Earth observing missions, and summarize key findings. These missions include EOS missions such as Landsat 7, QuikScat, Terra, Jason-1, Aqua, ICESat, SORCE, and Aura, as well as Earth probe missions such as TRMM and SeaWiFS. Recent findings from Cloud- Sat and CALIPSO from the Earth System Science Pathfinder program will also be summarized, if time permits. Due to its wide utilization by the Earth science community, both in the US and abroad, special emphasis will be placed on the Moderate Resolution Imaging Spectroradiometer (MODIS), developed by NASA and launched onboard the Terra spacecraft in 1999 and the Aqua spacecraft in 2002. As the quintessential instrument of the Earth Observing System, it is widely used for studies of the oceans, land, and atmosphere, and its lengthening time series of Earth observations is finding utilization in many communities for both climate, weather, and applications use.

King, Michael D.↗
NASA NTRS2005

Measurements of Photoelectric Yield and Physical Properties of Individual Lunar Dust Grains

Micron size dust grains levitated and transported on the lunar surface constitute a major problem for the robotic and human habitat missions for the Moon. It is well known since the Apollo missions that the lunar surface is covered with a thick layer of micron/sub-micron size dust grains. Transient dust clouds over the lunar horizon were observed by experiments during the Apollo 17 mission. Theoretical models suggest that the dust grains on the lunar surface are charged by the solar UV radiation as well as the solar wind. Even without any physical activity, the dust grains are levitated by electrostatic fields and transported away from the surface in the near vacuum environment of the Moon. The current dust charging and the levitation models, however, do not fully explain the observed phenomena. Since the abundance of dust on the Moon's surface with its observed adhesive characteristics is believed to have a severe impact on the human habitat and the lifetime and operations of a variety of equipment, it is necessary to investigate the phenomena and the charging properties of the lunar dust in order to develop appropriate mitigating strategies. We will present results of some recent laboratory experiments on individual micro/sub-micron size dust grains levitated in electrodynamic balance in simulated space environments. The experiments involve photoelectric emission measurements of individual micron size lunar dust grains illuminated with UV radiation in the 120-160 nm wavelength range. The photoelectric yields are required to determine the charging properties of lunar dust illuminated by solar UV radiation. We will present some recent results of laboratory measurement of the photoelectric yields and the physical properties of individual micron size dust grains from the Apollo and Luna-24 sample returns as well as the JSC-1 lunar simulants.

Abbas, M. M.↗