Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “closure model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Final Report to the U.S. Department of Energy for studies of Evaluation of Turbulence Parameterizations for Cloud-Resolving Models

The intermediately-prognostic higher-order turbulence closure (IPHOC) introduces a joint double-Gaussian distribution of liquid water potential temperature (θ l ), total water mixing ratio (q t ), and vertical velocity (w ) to represent any skewed turbulence circulations .The distribution is inferred from the first-, second-, and third-order moments of the variables given above, and is used to diagnose cloud fraction and grid-mean liquid water mixing ratio, as well as the buoyancy and fourth-order terms in the equations describing the evolution of the second- and third-order moments. Only three third-order moments (those of θ l , q t , and w ) are predicted in the IPHOC.

99 GENERAL AND MISCELLANEOUS↗

A minimal model of self-sustaining turbulence

In this work, we examine the turbulence maintained in a Restricted Nonlinear (RNL) model of plane Couette flow. This model is a computationally efficient approximation of the second order statistical state dynamics obtained by partitioning the flow into a streamwise averaged mean flow and perturbations about that mean, a closure referred to herein as the RNL{sub ∞} model. The RNL model investigated here employs a single member of the infinite ensemble that comprises the covariance of the RNL{sub ∞} dynamics. The RNL system has previously been shown to support self-sustaining turbulence with a mean flow and structural features that are consistent with direct numerical simulations (DNS). Regardless of the number of streamwise Fourier components used in the simulation, the RNL system’s self-sustaining turbulent state is supported by a small number of streamwise varying modes. Remarkably, further truncation of the RNL system’s support to as few as one streamwise varying mode can suffice to sustain the turbulent state. The close correspondence between RNL simulations and DNS that has been previously demonstrated along with the results presented here suggest that the fundamental mechanisms underlying wall-turbulence can be analyzed using these highly simplified RNL systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A boundary-layer model for Mars - Comparison with Viking lander and entry data

A 1D boundary-layer model of Mars based on a momentum equation that describes friction, pressure gradient, and Coriolis forces is presented. Frictional forces and convective heating are computed using the level-2 turbulence closure theory of Mellor and Yamada (1974). The model takes into account the radiative effects of CO2 gas and suspended dust particles. Both radiation and convection depend on surface temperatures which are computed from a surface heat budget. Model predictions are compared with available observations from Viking landers. It is concluded that, in general, the model reproduces the basic features of the temperature data. The agreement is particularly good at entry time for the V L-2 site, where the model and observations are within several degrees at all levels for which data are available.

Haberle, Robert M.↗

A passive model for the evolution of subgrid-scale instabilities in turbulent flow regimes

In this work, a zero-dimensional model for the development of turbulent mixing layers driven by Rayleigh–Taylor (RT) or Richtmyer–Meshkov (RM) instabilities is presented, for application in Reynolds-Averaged Navier–Stokes (RANS) simulations. The model approximates the behavior of the turbulent mixing layer at a passively advected tracer particle that sits on the material interface of interest in the simulation, and is used to provide initial conditions for the RANS model once the mixing layer width has developed to a size that may be resolved on the computational mesh. The model relies on approximations to the Besnard–Harlow–Rauenzahn (BHR) RANS closure equations and is thus consistent the turbulent development of the mixing layer, unlike previous models of this type which have focused on the early-time laminar development of RT or RM instabilities. These instabilities will often grow through an initially laminar state before developing into turbulence, and criteria for switching from an existing laminar model to the proposed turbulent model are considered. The proposed model reproduces the mixing layer development of RT and RM instabilities seen in mixed width resolving BHR RANS simulations to a reasonable degree of accuracy, and relaxes the need for the RANS simulation to resolve the mixed width as soon as the mixing layer becomes turbulent, which may be impractical in cases where the mixing layer grows through a wide range of scales.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advancing representations of turbulence in Earth System Models [Slides]

We have created a suite of coastally focused Large Eddy Simulation (LES), including a first ever investigation of the influence of the ocean bottom on turbulence. We have added important forcing not previously considered in LES models. We have evaluated a new more physically realistic and advanced closure against our LES database of simulations. Test cases will constrain constants in the new model and help us transition the mixing model from the deep ocean to the coastal ocean for the first time.

58 GEOSCIENCES↗

JAX-CanVeg: A Differentiable Land Surface Model

Land surface models consider the exchange of water, energy, and carbon along the soil-canopy-atmosphere continuum, which is challenging to model due to their complex interdependency and associated challenges in representing and parameterizing them. Differentiable modeling provides a new opportunity to capture these complex interactions by seamlessly hybridizing process-based models with deep neural networks (DNNs), benefiting both worlds, that is, the physical interpretation of process-based models and the learning power of DNNs. Here, we developed a differentiable land model, JAX-CanVeg. The new model builds on the legacy CanVeg by incorporating advanced functionalities through JAX in the graphic processing unit support, automatic differentiation, and integration with DNNs. We demonstrated JAX-CanVeg's hybrid modeling capability by applying the model at four flux tower sites with varying aridity. To this end, we developed a hybrid version of the Ball-Berry equation that emulates the water stress impact on stomatal closure to explore the capability of the hybrid model in (a) improving the simulations of latent heat fluxes (LE) and net ecosystem exchange (NEE), (b) improving the optimization trade-off when learning observations of both LE and NEE, and (c) benefiting a multi-layer canopy model setup. Our results show that the proposed hybrid model improved the simulations of LE and NEE at all sites, with an improved optimization trade-off over the process-based model. Additionally, the multi-layer canopy set benefited hybrid modeling at some sites. Anchored in differentiable modeling, our study provides a new avenue for modeling land-atmosphere interactions by leveraging the benefits of both data-driven learning and process-based modeling.

54 ENVIRONMENTAL SCIENCES↗

Unified Entrainment and Detrainment Closures for Extended Eddy-Diffusivity Mass-Flux Schemes

The extended Eddy Diffusivity Mass Flux (EDMF) scheme is used as a unied parameterization that simulates subgrid-scale dynamics across a range of regimes.This work presents unied entrainment and detrainment closures that allow this scheme to simulate the dry convective boundary layer, shallow convection and deep convection , while adjacent works present other necessary closures for this unied scheme and test its performance for stable, stratocumulus topped and convective boundary layers. Entrainment and detrainment are modeled as a combination of turbulent and dynamical processes. The turbulent component is taken as downgradient diffusion between subdomains. The dynamical component is based on a ratio of buoyancy and vertical velocity that ensures consistent treatment of the ratio of mass-flux at vanishing area fraction. Dynamical detrainment is controlled by the difference in relative humidity between subdomains when liquid water is present. These closures are rst evaluated with entrainment and detrainment diagnosed from Large Eddy Simulations where decaying tracers are used to identify the different subdomains and mass exchanges between them. When implemented in a single column model (SCM), these closures are tested in simulations of several observationally motivated cases of dry convective boundary layer, shallow convection and deep convection. Results show good agreement between the SCM and Large Eddy Simulations in key properties for climate models and profiles of first, second and third moments. The development of diurnal cycles and the onset of and precipitation (with simplified microphysics) are well predicted by the SCM.

54 ENVIRONMENTAL SCIENCES↗

Neutrinoless double beta decay in the microscopic interacting boson model

The results of a calculation of the nuclear matrix elements for neutrinoless double beta decay in the closure approximation in several nuclei within the framework of the microscopic interacting boson model (IBM-2) are presented and compared with those calculated in the shell model (SM) and quasiparticle random phase approximation (QRPA)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling and Power-Hardware-in-the-Loop Validation of Synchronous Machine Governor

This paper introduces the development of a high-fidelity gas turbine governor model using a programmable logic controller for power-hardware-in-the-loop (PHIL) validation. The governor model is integrated with the National Renewable Energy Laboratory's (NREL) PHIL test bed, featuring a 2-MVA synchronous machine and a 2.5-MW variable-speed drive, to emulate NG-driven HRSGs and CTs under various operational scenarios. The primary objective of this research is to study the grid-connected and islanding operations of conventional generation sources, with representative startup sequences including turbine purge, ignition, speed ramp-up, synchronization, and breaker closure. Preliminary results of the generator governor model on NREL PHIL platform, particularly using the 2.5-MW dynamometer system, offered significant insights into the modeling techniques, hardware integration, scaling, and real-world simulation dynamics.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Building a Comprehensive Mill-Level Database for the Industrial Sectors Integrated Solutions (ISIS) Model of the U.S. Pulp and Paper Sector

Air emissions from the U.S. pulp and paper sector have been federally regulated since 1978; however, regulations are periodically reviewed and revised to improve efficiency and effectiveness of existing emission standards. The Industrial Sectors Integrated Solutions (ISIS) model for the pulp and paper sector is currently under development at the U.S. Environmental Protection Agency (EPA), and can be utilized to facilitate multi-pollutant, sectorbased analyses that are performed in conjunction with regulatory development. The model utilizes a multi-sector, multi-product dynamic linear modeling framework that evaluates the economic impact of emission reduction strategies for multiple air pollutants. The ISIS model considers facility-level economic, environmental, and technical parameters, as well as sector-level market data, to estimate the impacts of environmental regulations on the pulp and paper industry. Specifically, the model can be used to estimate U.S. and global market impacts of new or more stringent air regulations, such as impacts on product price, exports and imports, market demands, capital investment, and mill closures. One major challenge to developing a representative model is the need for an extensive amount of data. This article discusses the collection and processing of data for use in the model, as well as the methods used for building the ISIS pulp and paper database that facilitates the required analyses to support the air quality management of the pulp and paper sector.

54 ENVIRONMENTAL SCIENCES↗

Multigrid acceleration and turbulence models for computations of 3D turbulent jets in crossflow

A multigrid method is presented for the calculation of three-dimensional turbulent jets in crossflow. Turbulence closure is achieved with either the standard k-epsilon model or a Reynolds Stress Model (RSM). Multigrid acceleration enables convergence rates which are far superior to that for a single grid method. With the k-epsilon model the rate approaches that for laminar flow, but with RSM it is somewhat slower. The increased stiffness of the system of equations in the latter may be responsible. Computed results with both turbulence models are compared with experimental data for a pair of opposed jets in crossflow. Both models yield reasonable agreement with mean flow velocity but RSM yields better prediction of the Reynolds stresses.

Demuren, A. O.↗

Multigrid acceleration and turbulence models for computations of 3D turbulent jets in crossflow

A multigrid method is presented for the calculation of three-dimensional turbulent jets in crossflow. Turbulence closure is achieved with either the standard k-epsilon model or a Reynolds stress model (RSM). Multigrid acceleration enables convergence rates which are far superior to that for a single grid method to be obtained with both turbulence models. With the k-epsilon model the rate approaches that for laminar flow, but with RSM it is somewhat slower. The increased stiffness of the system of equation in the latter may be responsible. Computed results with both turbulence models are compared to experimental data for a pair of opposed jets in crossflow. Both models yield reasonable agreement for the mean flow velocity, but RSM yields better predictions of the Reynolds stresses.

Demuren, A. O.↗

The Grell-Freitas Convection Parameterization: Recent Developments and Applications Within the NASA GEOS Global Model

We implemented and began to evaluate an alternative convection parameterization for the NASA Goddard Earth Observing System (GEOS) global model. The parameterization is based on the mass flux approach with several closures, for equilibrium and non-equilibrium convection, and includes scale and aerosol awareness functionalities. Recently, the scheme has been extended to a tri-modal spectral size approach to simulate the transition from shallow, mid, and deep convection regimes. In addition, the inclusion of a new closure for non-equilibrium convection resulted in a substantial gain of realism in model simulation of the diurnal cycle of convection over the land. Here, we briefly introduce the recent developments, implementation, and preliminary results of this parameterization in the NASA GEOS modeling system.

GEO↗

Aerosol–Ice Formation Closure: A Southern Great Plains Field Campaign

Prediction of ice formation in clouds presents one of the grand challenges in the atmospheric sciences. Immersion freezing initiated by ice-nucleating particles (INPs) is the dominant pathway of primary ice crystal formation in mixed-phase clouds, where supercooled water droplets and ice crystals coexist, with important implications for the hydrological cycle and climate. However, derivation of INP number concentrations from an ambient aerosol population in cloud-resolving and climate models remains highly uncertain. We conducted an aerosol–ice formation closure pilot study using a field-observational approach to evaluate the predictive capability of immersion freezing INPs. The closure study relies on collocated measurements of the ambient size-resolved and single-particle composition and INP number concentrations. The acquired particle data serve as input in several immersion freezing parameterizations, which are employed in cloud-resolving and climate models, for prediction of INP number concentrations. We discuss in detail one closure case study in which a front passed through the measurement site, resulting in a change of ambient particle and INP populations. We achieved closure in some circumstances within uncertainties, but we emphasize the need for freezing parameterization of potentially missing INP types and evaluation of the choice of parameterization to be employed. Overall, this closure pilot study aims to assess the level of parameter details and measurement strategies needed to achieve aerosol–ice formation closure. Furthermore, the closure approach is designed to accurately guide immersion freezing schemes in models, and ultimately identify the leading causes for climate model bias in INP predictions.

58 GEOSCIENCES↗

A Dynamic Optimality Principle for Water Use Strategies Explains Isohydric to Anisohydric Plant Responses to Drought

Optimality principles that underlie models of stomatal kinetics require identifying and formulating the gain and the costs involved in opening stomata. While the gain has been linked to larger carbon acquisition, there is still a debate as to the costs that limit stomatal opening. This work presents an Euler-Lagrange framework that accommodates water use strategy and various costs through the formulation of constraints. The reduction in plant hydraulic conductance due to cavitation is added as a new constraint above and beyond the soil hydrological balance and is analyzed for three different types of whole-plant vulnerability curves. Model results show that differences in vulnerability curves alone lead to relatively iso- and aniso-hydric stomatal behavior. Moreover, this framework explains how the presence of competition (biotic or abiotic) for water alters stomatal response to declining soil water content. This contribution corroborates previous research that predicts that a plant's environment (e.g., competition, soil processes) significantly affects its response to drought and supplies the required mathematical machinery to represent this complexity. The method adopted here disentangles cause and effect of the opening and closure of stomata and complements recent mechanistic models of stomatal response to drought.

54 ENVIRONMENTAL SCIENCES↗

Summary of Developing a Hanford Grout Modeling Framework Initial Workshop

The “Development of the Hanford Grout Modeling Framework” project as part of the Network of National Laboratories for Environmental Management and Stewardship (NNLEMS) funding program is underway. An initial project team workshop was held in Richland, WA on June 4 and 5, 2024 with participants from PNNL, SRNL, SNL, WRPS and CRESP (VU and UCF). The workshop covered an overview of the current state of the art in grout modeling tools provided by the team. Based on a focus on liquid waste immobilization grout and encapsulation grout for solid wastes and tank closure grout at Hanford, the team identified preliminary conceptual models for these three applications which will be used to form the basis of the Hanford Grout Modeling Framework. The key processes that can drive mechanisms impacting the grout performance were identified for each test case. The programmatic plan was also identified with five core Themes being selected that will form the focus of the project. Within each theme, individual tasks for Year 1 were planned in support of the development of an updated Hanford Grout Modeling Framework. This report presents a summary of the information presented during the workshop.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Theory for transport in magnetized plasmas

We present a two fluid model for anomalous thermal, particle and momentum transport which has been derived from kinetic theory using a small parameter ε~10-2. This small parameter can come from either the ratio of wave frequency to cyclotron frequency or the ratio of potential to thermal energies. This fluid model is strongly nonlinear and has an exact closure within the accuracy ε. It can be used to simulate the full radius of a tokamak including internal and edge transport barriers at the same time without introducing any local assumptions for physics model or grid size. It involves a full transport matrix, thus giving possibility for both density and heat pinches. The model can be derived from the Vlasov equation, adding also close collisions and includes particle pinches of the type found in the magnetosphere and in the Massachusetts Institute of Technology elevated dipole machine. Pinches are also in agreement for the heat pinch experiments on Doublet III D including simultaneous particle and heat pinches. For tokamaks it gives the right scaling of confinement time versus heating power. Finally, we have also recovered the Turbulent Equipartition result that the density scales as inverse safety factor q in typical simulations. Thus this model is both fundamental and of high practical use.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulence modeling for computational aerodynamics

The status of turbulence modeling for external aerodynamic flows is reviewed, and closure concepts for the compressible form of the Reynolds-averaged Navier-Stokes equations are briefly outlined to establish a framework for comparison. The importance of experimental requirements for developing and verifying turbulence models is emphasized. Attention is then given to three important flow categories: attached flows, separating and reattaching flows, and trailing-edge flows. Examples of comparisons between experiments and computations for twoand three-dimensional flows are presented to illustrate the status of modeling. It is shown that, for most two-dimensional attached flows, eddy viscosity concepts will probably be adequate. For attached three-dimensional flows, however, eddy-viscosity and Reynolds-stress models are both deficient, failing to predict the proper surface shear-stress in rapidly skewing boundary layers, regardless of whether they are pressure driven or strain driven.

Marvin, J. G.↗