Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “charging analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Ultrafast energy redistribution in C{sub 60} fullerenes: A real time study by two-color femtosecond spectroscopy

Strong-field excitation and energy redistribution dynamics of C{sub 60} fullerenes are studied by means of time-resolved mass spectrometry in a two-color femtosecond pump-probe setup. Resonant pre-excitation of the electronic system via the first dipole-allowed HOMO{yields}LUMO+1(t{sub 1g}) (HOMO denotes highest occupied molecular orbital and LUMO denotes lowest unoccupied molecular orbital) transition with ultrashort 25 fs pulses at 399 nm of some 10{sup 12} W cm{sup -2} results in a highly nonequilibrium distribution of excited electrons and vibrational modes in the neutral species. The subsequent coupling among the electronic and nuclear degrees of freedom is monitored by probing the system with time-delayed 27 fs pulses at 797 nm of some 10{sup 13} W cm{sup -2}. Direct information on the characteristic relaxation time is derived from the analysis of transient singly and multiply charged parent and fragment ion signals as a function of pump-probe delay and laser pulse intensity. The observed relaxation times {tau}{sub el}{approx_equal}60-400 fs are attributed to different microcanonical ensembles prepared in the pre-excitation process and correspond to different total energy contents and energy sharing between electronic and vibrational degrees. The characteristic differences and trends allow one to extract a consistent picture for the formation dynamics of ions in different charge states and their fullerenelike fragments and give evidence to collective effects in multiple ionization such as plasmon-enhanced energy deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photodissociation of (ICN){sub 2} van der Waals dimer using velocity imaging technique

Photodissociation of (ICN){sub 2} dimer from 265 to 270 nm are studied using time-of-flight mass spectrometry combined with velocity imaging technique. Both I{sup +} and I{sub 2}{sup +} ions are found in the mass spectra. The I{sub 2}{sup +} ions result from (1+1) resonant ionization of the neutral I{sub 2} fragment that is produced in the photodissociation of dimer, but not from dissociative ionization of (ICN){sub 2}; i.e., (ICN){sub 2}{sup +}+h{nu}{yields}I{sub 2}{sup +}+2CN. The dissociation channels of I{sub 2}{sup +} leading to I{sup +} are all found with parallel character. The total kinetic energy distributions and anisotropy parameters of the I{sup +} channels produced by (ICN){sub 2} are almost the same as those from a neutral I{sub 2} sample, thereby confirming that the I{sub 2} fragments are obtained in cold state. With the aid of ab initio calculations, a plausible dissociation mechanism is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon nanowalls as material for electrochemical transducers

The electrochemical reactivity of a carbon nanowalls electrode was highlighted. The carbon nanowalls were synthesized at 520 deg. C in an acetylene/ammonia electron cyclotronic resonance plasma without any metal catalyst. The electrode surface was characterized by scanning and transmission electron microscopy. Its electrochemical reactivity was studied by both cyclic voltammetry and electrochemical impedance spectroscopy. After the carbon nanowalls deposition, the electronic transfer rate constant and the electroactive surface area were found to be increased by a factor of 7 and 3, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fragmentation of peptide negative molecular ions induced by resonance electron capture

A simple robust method to study resonance gas-phase reactions between neutral peptides of low volatility and free electrons has been designed and implemented. Resonance electron capture (REC) experiments were performed by several neutral model peptides and two naturally occurring peptides. The assignment of negative ions (NIs) formed in these gas-phase reactions was based on high mass-resolving power experiments. From these accurate mass measurements, it was concluded that fragment NIs formed by low (1-2 eV) energy REC are of the same types as those observed in electron capture/transfer dissociation, where the positive charge is a factor. The main feature resulting from these REC experiments by peptides is the occurrence of z{sub n}-1 ions, which are invariably of the highest abundances in the negative ion mass spectra of larger peptides. [M-H]{sup -} NIs presumably the carboxylate anion structure dominate the REC spectra of smaller peptides. There was no evidence for the occurrence of the complementary reaction, i.e., the formations of c{sub n}+1 ions. Instead, c{sub n} ions arose without hydrogen/proton transfer albeit with lower abundances than that observed for z{sub n}-1 ions. Only the amide forms of small peptides showed more abundant ion peaks for the c{sub n} ions than for the z{sub n}-1 ions. The mechanisms for the N-C{sub {alpha}} bond cleavage are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity of aluminum cluster anions with ammonia: Selective etching of Al{sub 11}{sup -} and Al{sub 12}{sup -}

Reactivity of aluminum cluster anions toward ammonia was studied via mass spectrometry. Highly selective etching of Al{sub 11}{sup -} and Al{sub 12}{sup -} was observed at low concentrations of ammonia. However, at sufficiently high concentrations of ammonia, all other sizes of aluminum cluster anions, except for Al{sub 13}{sup -}, were also observed to deplete. The disappearance of Al{sub 11}{sup -} and Al{sub 12}{sup -} was accompanied by concurrent production of Al{sub 11}NH{sub 3}{sup -} and Al{sub 12}NH{sub 3}{sup -} species, respectively. Theoretical simulations of the photoelectron spectrum of Al{sub 11}NH{sub 3}{sup -} showed conclusively that its ammonia moiety is chemisorbed without dissociation, although in the case of Al{sub 12}NH{sub 3}{sup -}, dissociation of the ammonia moiety could not be excluded. Moreover, since differences in calculated Al{sub n}{sup -}+NH{sub 3} (n=9-12) reaction energies were not able to explain the observed selective etching of Al{sub 11}{sup -} and Al{sub 12}{sup -}, we concluded that thermodynamics plays only a minor role in determining the observed reactivity pattern, and that kinetics is the more influential factor. In particular, the conversion from the physisorbed Al{sub n}{sup -}(NH{sub 3}) to chemisorbed Al{sub n}NH{sub 3}{sup -} species is proposed as the likely rate-limiting step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure evolution in carbon-ion implanted sapphire

Carbon ions of MeV energy were implanted into sapphire to fluences of 1x10{sup 17} or 2x10{sup 17} cm{sup -2} and thermally annealed in forming gas (4% H in Ar) for 1 h. Secondary ion mass spectroscopy results obtained from the lower dose implant showed retention of implanted carbon and accumulation of H near the end of range in the C implanted and annealed sample. Three distinct regions were identified by transmission electron microscopy of the implanted region in the higher dose implant. First, in the near surface region, was a low damage region (L{sub 1}) composed of crystalline sapphire and a high density of plateletlike defects. Underneath this was a thin, highly damaged and amorphized region (L{sub 2}) near the end of range in which a mixture of i-carbon and nanodiamond phases are present. Finally, there was a pristine, undamaged sapphire region (L{sub 3}) beyond the end of range. In the annealed sample some evidence of the presence of diamond nanoclusters was found deep within the implanted layer near the projected range of the C ions. These results are compared with our previous work on carbon implanted quartz in which nanodiamond phases were formed only a few tens of nanometers from the surface, a considerable distance from the projected range of the ions, suggesting that significant out diffusion of the implanted carbon had occurred.

36 MATERIALS SCIENCE↗

Optical And Mass Spectrometric Investigation Of The Interaction Of Hydrogen With Nitrogen In (In)GaAsN Layers

Fourier transform infrared absorption spectroscopy and secondary ion mass spectroscopy have been carried out on GaAs based dilute nitride layers after treatment with H{sup +} or D{sup +} ions. Formation of N-H (D-H) centers is detected by vibrational absorption bands of H (D). The modes are assigned to two different complexes, each involving one H (D) atom. A major fraction of the hydrogen in the layers might be not or only loosely bound to nitrogen.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved interfacial state density in Al{sub 2}O{sub 3}/GaAs interfaces using metal-organic chemical vapor deposition

In situ deposition of Al{sub 2}O{sub 3} on GaAs was performed by chemical-vapor-deposition (CVD) with trimethyaluminum and isopropanol as precursors. A gallium-rich region in the Al{sub 2}O{sub 3} thin film above the interface was spontaneously formed via the in situ CVD process. Ga-enrichment of the interface was observed using secondary ion mass spectrometry (SIMS) depth profile measurement. X-ray photoelectron spectroscopy (XPS) results show that the gallium-rich region consists of Al{sub 2}O{sub 3} and Ga{sub 2}O{sub 3}, but no As{sub 2}O{sub 3} was observed. The Ga{sub 2}O{sub 3}-Al{sub 2}O{sub 3} layer above the oxide/GaAs interface reduces the frequency dispersion as measured with capacitance-voltage (C-V) characteristics and lowers the interfacial state density as compared to atomic-layer-deposition *(ALD) deposited films which do not display this gallium enrichment above the interface.

36 MATERIALS SCIENCE↗

Defect engineering of the electrochemical characteristics of carbon nanotube varieties

The electrochemical behavior of carbon nanotubes (CNTs) containing both intrinsic and extrinsically introduced defects has been investigated through the study of bamboo and hollow multiwalled CNT morphologies. The controlled addition of argon ions was used for varying the charge and type of extrinsic defects. It was indicated from Raman spectroscopy and voltammetry that the electrocatalytic response of hollow type CNTs could be tailored more significantly, compared to bamboo type CNTs which have innately high reactive site densities and are less amenable to modification. An in-plane correlation length parameter was used to understand the variation of the defect density as a function of argon ion irradiation. The work has implications in the design of nanotube based chemical sensors, facilitated through the introduction of suitable reactive sites.

36 MATERIALS SCIENCE↗

Hydrogen refinement during solid phase epitaxy of buried amorphous silicon layers

The effect of hydrogen on the kinetics of solid phase epitaxy (SPE) have been studied in buried amorphous Si layers. The crystallization rate of the front amorphous/crystalline (a/c) interface is monitored with time resolved reflectivity. Secondary ion mass spectrometry (SIMS) is used to examine H implanted profiles at selected stages of the anneals. The H retardation of the SPE rate is determined up to a H concentration of 2.3x10{sup 20} cm{sup -3} where the SPE rate decreases by 80%. Numerical simulations are performed to model the H diffusion, the moving a/c interfaces and the refinement of the H profile at these interfaces. Despite the high H concentration involved, a simple Fickian diffusion model results in good agreement with the SIMS data. The segregation coefficient is estimated to be 0.07 at 575 deg. C. A significant fraction of the H escapes from the a-Si layer during SPE especially once the two a/c interfaces meet which is signified by the lack of H-related voids after a subsequent high temperature anneal.

36 MATERIALS SCIENCE↗

Spatial and temporal evolution of ion energies in high power impulse magnetron sputtering plasma discharge

High power impulse magnetron sputtering (HIPIMS) is a novel deposition technology successfully implemented on full scale industrial machines. HIPIMS utilizes short pulses of high power delivered to the target in order to generate high amount of metal ions. The life-span of ions between the pulses and their energy distribution could strongly influence the properties and characteristics of the deposited coating. In modern industrial coating machines the sample rotates on a substrate holder and changes its position and distance with regard to the magnetron. Time resolved measurements of the ion energy distribution function (IEDF) at different distances from the magnetron have been performed to investigate the temporal evolution of ions at various distances from target. The measurements were performed using two pressures, 1 and 3 Pa to investigate the influence of working gas pressure on IEDF. Plasma sampling energy-resolved mass spectroscopy was used to measure the IEDF of Ti{sup 1+}, Ti{sup 2+}, Ar{sup 1+}, and Ar{sup 2+} ions in HIPIMS plasma discharge with titanium (Ti) target in Ar atmosphere. The measurements were done over a full pulse period and the distance between the magnetron and the orifice of the mass spectrometer was changed from 25 to 215 mm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of N-polar GaN domains as Ohmic contacts

Transfer line method measurements revealed that if the Ohmic contact regions were replaced by N-polar GaN, the contact resistance could be reduced from 0.71 {Omega} mm (or {rho}{sub c}=4x10{sup -6} {Omega} cm{sup 2}) to 0.24 {Omega} mm for a {approx}200 nm thick Si-doped GaN layer. The reduction in contact resistance was largely due to the {approx}10{sup 19} cm{sup -3} free carriers in N-polar source/drain regions as measured by Hall effect. Secondary ion mass spectroscopy confirmed that oxygen doping in the N-polar region was more than three orders of magnitude greater than that in the Ga-polar region that was explained by the large difference in the adsorption energy for oxygen ({approx}1.3 eV/atom) between the N- and Ga-polar surfaces during the metalorganic chemical vapor deposition.

36 MATERIALS SCIENCE↗

Cold chemistry with electronically excited Ca{sup +} Coulomb crystals

Rate constants for chemical reactions of laser-cooled Ca{sup +} ions and neutral polar molecules (CH{sub 3}F, CH{sub 2}F{sub 2}, or CH{sub 3}Cl) have been measured at low collision energies (<E{sub coll}>/k{sub B}=5-243 K). Low kinetic energy ensembles of {sup 40}Ca{sup +} ions are prepared through Doppler laser cooling to form ''Coulomb crystals'' in which the ions form a latticelike arrangement in the trapping potential. The trapped ions react with translationally cold beams of polar molecules produced by a quadrupole guide velocity selector or with room-temperature gas admitted into the vacuum chamber. Imaging of the Ca{sup +} ion fluorescence allows the progress of the reaction to be monitored. Product ions are sympathetically cooled into the crystal structure and are unambiguously identified through resonance-excitation mass spectrometry using just two trapped ions. Variations of the laser-cooling parameters are shown to result in different steady-state populations of the electronic states of {sup 40}Ca{sup +} involved in the laser-cooling cycle, and these are modeled by solving the optical Bloch equations for the eight-level system. Systematic variation of the steady-state populations over a series of reaction experiments allows the extraction of bimolecular rate constants for reactions of the ground state ({sup 2}S{sub 1/2}) and the combined excited states ({sup 2}D{sub 3/2} and {sup 2}P{sub 1/2}) of {sup 40}Ca{sup +}. These results are analyzed in the context of capture theories and ab initio electronic structure calculations of the reaction profiles. In each case, suppression of the ground state rate constant is explained by the presence of a submerged or real barrier on the ground state potential surface. Rate constants for the excited states are generally found to be in line with capture theories.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Oxidation Effects During Low Energy BF{sub 2}{sup +} Ion Implantation

We present results on silicon wafer surface oxidation observed during low energy high dose BF{sub 2}{sup +} implantation. Experiments were performed on single-crystal and pre-amorphized silicon wafers that help elucidate the surface structure impact on boron distribution profiles and dose retention. Implanters with different architectures were compared including both single wafer and batch systems. It was found that the oxidation rate depends on implanter type and design, and that the surface oxide thickness is a linear function of implantation dose and time. Surface oxidation is significantly higher for batch systems compared to single wafer tools. This is due primarily to the significantly lower beam duty cycle on the batch implanter. The oxide thicknesses estimated from SIMS oxygen profiles are in agreement with ellipsometry measurements after spike annealing, and show a similar difference between single wafer and batch implanters. SIMS boron distribution profiles after implantation were compared and used to calculate retained dose. In the medium dose range ({<=}3x10{sup 14} at/cm{sup 2}) the profiles from different implanters are well matched and the dose retention is close to 100%. For the higher dose range ({>=}3x10{sup 15} at/cm{sup 2}) retention for the batch implanter is significantly less than the single wafer tool and depends on the wafer surface structure. A higher oxidation rate results in lower dopant activation and higher Rs value after spike annealing. For high implantation doses the single wafer system allows much higher dose retention and better boron activation after annealing.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Biomolecular Emission by Swift Heavy Ion Bombardment

Secondary Ion Mass spectrometry (SIMS) has been generally used in the field of material sciences. In recent years, it has also been applied for molecular imaging of biological samples. Nevertheless, molecular ions derived from the large molecules (more than 1 kDa) were detected with very low sensitivity. Plasma desorption mass spectrometry (PDMS) is known as mass spectrometry for large organic molecule. In PDMS, fission fragments bombard samples and the impact induces molecular ionization by electronic excitation. Large organic molecules are detected by using swift heavy ions in SIMS. In this work, 6 MeV Cu{sup 4+} we irradiated angiotensin II, a class of peptides. The intact molecular ions generated by swift heavy ion irradiation were analyzed by time-of-flight (TOF) measurement. The yields are compared with some other probe ions, bismuth or flurane. Swift heavy ion bombardment ionized large organic molecules more effectively than other probes. Therefore, high energy ion can be applied in high resolution molecular imaging.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evaluation of surface damage on organic materials irradiated with Ar cluster ion beam

The sputtering yields of organic materials under large cluster ion bombardment are much higher than those under conventional monomer ion bombardment. The sputtering rate of arginine remains constant with fluence for an Ar cluster ion beam, but decreases with fluence for Ar monomer. Additionally, because Ar cluster etching induces little damage, Ar cluster ion can be used to achieve molecular depth profiling of organic materials. In this study, we evaluated the damage to poly methyl methacrylate (PMMA) and arginine samples irradiated with Ar atomic and Ar cluster ion beams. Arginine samples were analyzed by secondary ion mass spectrometry (SIMS) and PMMA samples were analyzed by X-ray photoelectron spectroscopy (XPS). The chemical structure of organic materials remained unchanged after Ar cluster irradiation, but was seriously damaged. These results indicated that bombardment with Ar cluster ions induced less surface damage than bombardment with Ar atomic ion. The damage layer thickness with 5 keV Ar cluster ion bombardment was less than 1 nm.

36 MATERIALS SCIENCE↗

Ribbon and Spot Beam Process Performance of the Dual Mode iPulsar High Current Ion Implanter

Low energy implant process data are presented from a dual mode high current ion implanter. The iPulsar is a flexible single wafer implanter capable of running both ribbon beams with one-dimensional mechanical scan of the wafer and spot beams with two-dimensional wafer scan. The main components of the implanter are described and their operation explained. Boron concentration profiles in Ge pre-amorphized substrates, measured by secondary ion mass spectroscopy (SIMS) are presented before and after anneal with drift and decelerated beams. In addition, spot and ribbon beam as-implanted phosphorus and carbon profiles are presented and the characteristics of each mode of operation are discussed.

36 MATERIALS SCIENCE↗