Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “characterization techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Photoreflectance for in-situ characterization of MOCVD growth of semiconductors under micro-gravity conditions

A contactless electromodulation technique of photoreflectance (PR) was developed for in-situ monitoring of metal-organic chemical vapor deposition (MOCVD) semiconductor growth for micro-gravity applications. PR can be employed in a real MOCVD reactor including rotating substrate (approximately 500 rev/min) in flowing gases and through a diffuser plate. Measurements on GaAs and Ga(0.82)Al(0.18)As were made up to 690 C. The direct band gaps of In(x)Ga(1-x)As (x = 0.07 and 0.16) were evaluated up to 600 C. In order to address the question of real time measurement, the spectra of the direct gap of GaAs at 650 C was obtained in 30 seconds and 15 seconds seems feasible.

Pollak, Fred H.↗
NASA NTRS1991

Spray characterization using planar laser imaging

Results on the application of a planar polarization ratio technique to spray and soot particle measurements are presented and compared with the phase Doppler particle analyzer (PDPA) measurements. With the assumption of a logarithmic normal distribution, reasonable agreement between the two techniques were obtained, demonstrating the capability of the planar polarization ratio technique to differentiate regions containing soot particles from those containing droplets. A comparison of quantitative measurement capabilities of the two techniques showed that the planar polarization ratio technique can be applied to complicated combustion environments for at least semiquantitative investigation of sprays.

Pal, S.↗
NASA NTRS2007

Characterization of Mid-Infrared Single Mode Fibers as Modal Filters

We present a technique for measuring the modal filtering ability of single mode fibers. The ideal modal filter rejects all input field components that have no overlap with the fundamental mode of the filter and does not attenuate the fundamental mode. We define the quality of a nonideal modal filter Q(sub f) as the ratio of transmittance for the fundamental mode to the transmittance for an input field that has no overlap with the fundamental mode. We demonstrate the technique on a 20 cm long mid-infrared fiber that was produced by the U.S. Naval Research Laboratory. The filter quality Q(sub f) for this fiber at 10.5 micron wavelength is 1000 +/- 300. The absorption and scattering losses in the fundamental mode are approximately 8 dB/m. The total transmittance for the fundamental mode, including Fresnel reflections, is 0.428 +/- 0.002. The application of interest is the search for extrasolar Earthlike planets using nulling interferometry. It requires high rejection ratios to suppress the light of a bright star, so that the faint planet becomes visible. The use of modal filters increases the rejection ratio (or, equivalently, relaxes requirements on the wavefront quality) by reducing the sensitivity to small wavefront errors. We show theoretically that, exclusive of coupling losses, the use of a modal filter leads to the improvement of the rejection ratio in a two-beam interferometer by a factor of Q(sub f).

single mode fibers↗
NASA NTRS2011

Characterization of Axial Inducer Cavitation Instabilities via High Speed Video Recordings

Sub-scale water tests were undertaken to assess the viability of utilizing high resolution, high frame-rate digital video recordings of a liquid rocket engine turbopump axial inducer to characterize cavitation instabilities. These high speed video (HSV) images of various cavitation phenomena, including higher order cavitation, rotating cavitation, alternating blade cavitation, and asymmetric cavitation, as well as non-cavitating flows for comparison, were recorded from various orientations through an acrylic tunnel using one and two cameras at digital recording rates ranging from 6,000 to 15,700 frames per second. The physical characteristics of these cavitation forms, including the mechanisms that define the cavitation frequency, were identified. Additionally, these images showed how the cavitation forms changed and transitioned from one type (tip vortex) to another (sheet cavitation) as the inducer boundary conditions (inlet pressures) were changed. Image processing techniques were developed which tracked the formation and collapse of cavitating fluid in a specified target area, both in the temporal and frequency domains, in order to characterize the cavitation instability frequency. The accuracy of the analysis techniques was found to be very dependent on target size for higher order cavitation, but much less so for the other phenomena. Tunnel-mounted piezoelectric, dynamic pressure transducers were present throughout these tests and were used as references in correlating the results obtained by image processing. Results showed good agreement between image processing and dynamic pressure spectral data. The test set-up, test program, and test results including H-Q and suction performance, dynamic environment and cavitation characterization, and image processing techniques and results will be discussed.

Arellano, Patrick↗
NASA NTRS1990

Turbulence modulation effect on evaporating spray characterization

The effects of turbulence modulation on the evaporating spray characteristics of a liquid fuel jet are numerically investigated. Two modulation models are implemented into the k-epsilon two-equation model. The gas phase is solved by a pressure-based method on a Eulerian frame and droplets are solved by a stochastic discrete particle technique based on Lagrangian formulation. The k-epsilon models are used to characterize the time and length scales of the gas phase turbulence for droplet dispersions and droplet/turbulence interactions. The modulation models are found to have significant effects on gas phase dynamics, and are less important for the droplet dynamics. Numerical predictions are compared with the experimental data of Drallemier and Peters (1990).

Shang, H. M.↗
NASA NTRS2004

Characterizing Oscillatory Bursts in Single-Trial EEG Data

Oscillatory bursts in numerous bands ranging from low (theta) to high frequencies (e.g., gamma) undoubtedly play an important role in cortical dynamics. Largely because of the inadequacy of existing analytic techniques. however, oscillatory bursts and their role in cortical processing remains poorly understood. To study oscillatory bursts effectively one must be able to isolate them and characterize them in the single trial. We describe a series of straightforward analysis techniques that produce useful indices of burst characteristics. First, stimulus-evoked responses are estimated using Differentially Variable Component Analysis (dVCA), and are subtracted from the single-trial. The single-trial characteristics of the evoked responses are stored to identify possible correlations with burst activity. Time-frequency (T-F), or wavelet, analyses are then applied to the single trial residuals. While T-F plots have been used in recent studies to identify and isolate bursts, we go further by fitting each burst in the T-F plot with a two-dimensional Gaussian. This provides a set of burst characteristics, such as, center time. burst duration, center frequency. frequency dispersion. and amplitude, all of which contribute to the accurate characterization of the individual burst. The burst phase can also be estimated. Burst characteristics can be quantified with several standard techniques (e.g.. histogramming and clustering), as well as Bayesian techniques (e.g., blocking) to allow a more parametric description analysis of the characteristics of oscillatory bursts, and the relationships of specific parameters to cortical excitability and stimulus integration.

Knuth, K. H.↗
NASA NTRS1975

Modeling transient faults in TMR computer systems

In this paper we report the development of a technique for modeling transient faults in redundant computer systems. Transient faults are characterized by their arrival rate and their duration. Fault detection, transient recovery, and the effect of permanent faults are included. A fault occurrence/recovery status state diagram is drawn to illustrate the operational status of the system while undergoing faults. The state diagram is used to formulate the equations for the mission failure probability. The techniques are then applied to a triple modular redundant computer system.

Merryman, P. M.↗
NASA NTRS2015

Characterization of Residual Stress Effects on Fatigue Crack Growth of a Friction Stir Welded Aluminum Alloy

An on-line compliance-based method to account for residual stress effects in stress-intensity factor and fatigue crack growth property determinations has been evaluated. Residual stress intensity factor results determined from specimens containing friction stir weld induced residual stresses are presented, and the on-line method results were found to be in excellent agreement with residual stress-intensity factor data obtained using the cut compliance method. Variable stress-intensity factor tests were designed to demonstrate that a simple superposition model, summing the applied stress-intensity factor with the residual stress-intensity factor, can be used to determine the total crack-tip stress-intensity factor. Finite element, VCCT (virtual crack closure technique), and J-integral analysis methods have been used to characterize weld-induced residual stress using thermal expansion/contraction in the form of an equivalent delta T (change in local temperature during welding) to simulate the welding process. This equivalent delta T was established and applied to analyze different specimen configurations to predict residual stress distributions and associated residual stress-intensity factor values. The predictions were found to agree well with experimental results obtained using the crack- and cut-compliance methods.

Newman, John A.↗
NASA NTRS1980

Progress in passive microwave remote sensing - Nonlinear retrieval techniques

A variety of nonlinear retrieval methods have been applied to passive microwave remote sensing problems. These problems can be characterized in part by the degree to which their underlying physics and statistics can be understood and characterized in a simple way. Four examples of varying complexity are considered here; the simplest problem requires only analytic expressions for retrievals, whereas the most complex problem has been handled only with pattern classification techniques. The four examples are: (1) Doppler measurements of winds at 70 to 100 km, (2) retrieval of atmospheric water vapor profiles using the opaque 183-GHz water vapor resonance, (3) retrieval of snow accumulation rate by means of combined theoretical and empirical procedures, and (4) classification of diverse polar terrain by means of pattern recognition techniques.

Staelin, D. H.↗
NASA NTRS2001

Predictive Techniques for Spacecraft Cabin Air Quality Control

As assembly of the International Space Station (ISS) proceeds, predictive techniques are used to determine the best approach for handling a variety of cabin air quality challenges. These techniques use equipment offgassing data collected from each ISS module before flight to characterize the trace chemical contaminant load. Combined with crew metabolic loads, these data serve as input to a predictive model for assessing the capability of the onboard atmosphere revitalization systems to handle the overall trace contaminant load as station assembly progresses. The techniques for predicting in-flight air quality are summarized along with results from early ISS mission analyses. Results from groundbased analyses of in-flight air quality samples are compared to the predictions to demonstrate the technique's relative conservatism.

Perry, J. L.↗
NASA NTRSDate not supplied

Absolute Characterization of Gravity Sag

G-release –defined as the knowledge uncertainty of a mirror’s gravity-sag or the residual error between the mirror’s predicted and actual on-orbit shape –is a critical error budget element for space telescopes. For a UV/Optical telescope, G-release needs to be less than 4 nm rms. Absolute metrology techniques developed for high-accuracy optical surface testing can be used for characterizing gravity-sag of space optics. This paper presents the importance of gravity sag for space optics and reviews methods for its compensation, characterization or correction.

H Philip Stahl↗
NASA NTRS1972

Mississippi Sound remote sensing study

Remote sensing techniques are being developed to study near shore marine waters in the Mississippi Sound. Specific elements of the investigation include: (1) evaluation of existing techniques and instrument capabilities for remote measurement of parameters which characterize near shore water; (2) integration of these parameters into a system which will make possible the definition of circulation characteristics; (3) conduct of applications experiments; and (4) definition of hardware development requirements and/or system specifications. Efforts have emphasized: (1) development of a satisfactory system of gathering ground truth over the entire area of Mississippi Sound to aid in evaluating remotely sensed data; (2) conduct of two data acquisition experiments; (3) analysis of individual sensor data from completed flights; and (4) pursuit of methods which will allow interrelations between data from individual sensors in order to add another dimension to the study.

Atwell, B. H.↗
NASA NTRS1971

Development of graphite/polyimide composites.

This paper covers the characterization of the HT-S/RS6234 graphite/polyimide system. Processing techniques for vacuum bag, vacuum bag-press augmented, and vacuum bag-autoclave augmented have been developed under sponsorship of the NASA Marshall Space Flight Center (MSFC). Preliminary design properties for the HT-S/RS6234 resin system were developed at -320, 75, and 600 F. The processing techniques and the materials developed during this program are all directly applicable to the fabrication of large structural components such as would be required for the space shuttle and other advanced space vehicles.

Stuckey, J. M.↗
NASA NTRS1972

Mechanisms of oxidation in the Co-Cr system.

Oxidation has been studied both as a function of temperature in the range from 900 to 1300 C and of the partial pressure of oxygen in the range from 0.05 to 760 torr. In addition, microstructures of oxide scales have been studied and characterized in more detail utilizing metallographic and X-ray techniques combined with electron microprobe analysis. The parabolic rate constants in 1100 C and at 100 and 10 torr oxygen are presented in a graph as a function of chromium content. Three main different mechanisms of oxidation in the Co-Cr system have been identified. In two of these, the rate determining process controlling the oxidation is the solid state diffusion of cobalt through the oxide CoO. The rate controlling process governing the oxidation for the third mechanism is chromium diffusion in dichromium trioxide.

Kofstad, P. K.↗
NASA NTRS1973

Photosensor aperture shaping to reduce aliasing in optical-mechanical line-scan imaging systems.

Review of optical-mechanical scanning techniques that are generally employed in instruments specifically designed to characterize variations in scene brightness spectrally or radiometrically. Special attention is given to the effect of aliasing on the spatial detail of the reconstructed image. Aliasing may be caused by linescan sampling and can, in turn, severely degrade images that emphasize the spatial characterization of a scene. Photosensor aperture shaping and line-scan spacing are investigated as means for reducing this degradation.

Katzberg, S. J.↗
NASA NTRS1973

Single step detection of blurred images in a coherent optical processor.

Two important operations that can be performed by coherent optical processing systems are image detection and image restoration. These operations require complex spatial filters, and if both operations are to be performed, cascaded processing stages employing two separate spatial filters are usually needed. Spatial filters are described that will perform in a single step both operations simultaneously, thus eliminating the need for extra processing stages while providing the advantages of higher efficiency and smaller space requirements. The filters are characterized by their simplicity and are easily fabricated using conventional techniques. Experimental results are presented.

Jablonowski, D. P.↗
NASA NTRS1978

Gamma ray polarimetry

Spectroscopic instruments currently being proposed may possess polarimetric capabilities which sould be nurtured and enhanced to permit characterization of basic emission mechanisms which are impossible using other techniques. Compton scattering and pair production detected the polarization of high energy (E is greater than 50 keV) protons in laboratory experiments. The polarization properties of a detection system consisting of 19 germanium crystals in a closed packed array are examined and the advantages of such a detector over Thompson scattering are discussed. The possiblity of using pair production to detect polarization of high energy gamma rays, and the associated modulation factors are discussed. The central difficulty involved in using pair production polarimeters in astrophysical applications is that the typical opening of the electron or positron direction with respect to the incident photon aircitron is small, of order E/sq mc. Multiple scattering in the material used to convert the photons to an electron positron pair causes deviations in the direction of the electron and positron.

Long, K. S.↗
NASA NTRS1978

Characterization of nonideal silicon in terms of lifetime and diffusion length

Experimental methods have been evaluated for the determination of lifetime and diffusion length in silicon intentionally doped with potentially lifetime-degrading impurities which may be present in low-cost silicon intended for use in terrestrial flat-plate arrays. Results obtained with these methods have been compared for mutual consistency. The effects of a number of impurities on bulk lifetime were determined from steady-state photoconductivity, and solar cells fabricated from this material were characterized in terms of diffusion length using a penetrating light technique. Comparison was made with results obtained by others using photoconductivity decay. General agreement was found in terms of the hierachy of impurities to which the lifetime is sensitive. The utility of the steady-state photoconductivity method is established even in the presence of considerable trapping.

Othmer, S.↗