Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WOOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Challenges for Numerical Modeling of Enhanced Geothermal Systems

A recent guest editorial by Wood (2009) pointed out the potential of enhanced geothermal systems (EGS) as a future source of “green” energy and suggested that EGS offers research opportunities for hydrogeologists seeking to become involved in the world’s energy future. Although EGS may have a bright future as a sustainable, low-carbon emission energy source, significant technical challenges must be overcome before this promising energy resource can be commercially viable. Because pilot EGS projects in the United States face very different economic constraints than current European projects, there is a real need to make technological advances to improve the return on capital investment. In this article, we amplify on Wood’s excellent editorial by describing some of the challenges that exist for the simulation of EGS.

15 GEOTHERMAL ENERGY↗

Variations in cell wall traits impact saccharification potential of Salix famelica and Salix eriocephala

Increasing global populations, finite arable land, and the anthropogenic release of carbon dioxide into the atmosphere are driving the search for bio-based alternatives to the petroleum-derived fuels and chemicals that underpin the global economy. With rapid growth rates, a propensity for coppicing, and a wide geographic range across Canada, native shrub willows (Salix spp.) are an attractive source of low-input, high-volume biomass. To date, most willow research has focused on increasing yields and improving cropping systems, while comparatively little work has been done to assess the intrinsic diversity in cell wall traits and bioenergy potential. In this study, we characterized the cell wall composition and wood ultrastructure of 338 xylem samples from two Canadian willow species, Salix famelica and Salix eriocephala, harvested from a common garden experimental plot. Lignin content ranged from 17.5–25.1% in S. famelica and 18.6–24.3% in S. eriocephala. Following alkali pretreatment with 62.5 mM NaOH at 90 °C for 3 h and a 70-h enzymatic digestion with Accellerase 1000, glucose release ranged from 23.0–38.9 wt% in S. famelica and from 20.5–37.7 wt% in S. eriocephala, while xylose release ranged from 9.4–14.9% in S. famelica and from 9.5–15.2% in S. eriocephala. Here, partial least squares regression modelling showed that lignin content and composition were important negative regulators of glucose release. Overall, this work highlights the innate variability in cell wall traits of native willows and identifies potential genotypes that should be considered in future breeding and deployment strategies for Canadian bioenergy production.

59 BASIC BIOLOGICAL SCIENCES↗

Creep suppression and fatigue in bio-based composites manufactured via conventional and large format additive manufacturing processes

The emergence of novel extrusion-based additive manufacturing (AM) processes has prompted the development of new thermoplastic composite feedstocks, and broadening sustainability initiatives have driven the development of bio-based and recyclable material for AM feedstocks. Poly(lactic acid) (PLA) with wood flour (WF) is one composite system that has been demonstrated in numerous AM applications, as well as traditional processing methods (i.e., compression and injection molding); however, there has been a need to understand how the variation in processing methodology impacts the material performance of these bio-based feedstocks from a fundamental perspective, with particular emphasis on creep for an extended application use-life. Herein, PLA/WF is explored as a feedstock material for large format additive manufacturing (LFAM) and the performance of additively manufactured materials is compared to those produced via more traditional processing methods. It is also demonstrated that the addition of WF decreases the material’s coefficient of thermal expansion (CTE) while increasing its Young’s modulus, susceptibility to water uptake, and creep fatigue resistance. Essentially, the addition of 20 wt% WF results in a 92 % decrease in rubbery regime CTE while simultaneously resulting in a 14 % increase in modulus, 190 % increase in water uptake, and a 31 % decrease in residual strain after cyclic creep tests. The processing method was also found to play a large role in the final part performance, with the printed material increasing the crystallinity by 183 % and 214 % compared to its compression and injection molded counterparts. Furthermore, the porosity of printed samples increased by two orders of magnitude compared to samples prepared via traditional processing methods.

36 MATERIALS SCIENCE↗

The Uranium from Seawater Program at the Pacific Northwest National Laboratory: Overview of Marine Testing, Adsorbent Characterization, Adsorbent Durability, Adsorbent Toxicity, and Deployment Studies

The Pacific Northwest National Laboratory’s (PNNL) Marine Science Laboratory (MSL) located along the coast of Washington State is evaluating the performance of uranium adsorption materials being developed for seawater extraction under realistic marine conditions with natural seawater. Two types of exposure systems were employed in this program: flow-through columns for testing of fixed beds of individual fibers and pellets and a recirculating water flume for testing of braided adsorbent material. Testing consists of measurements of the adsorption of uranium and other elements from seawater as a function of time, typically 42 to 56 day exposures, to determine the adsorbent capacity and adsorption rate (kinetics). Analysis of uranium and other trace elements collected by the adsorbents was conducted following strong acid digestion of the adsorbent with 50% aqua regia using either Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) or Inductively Coupled Plasma Mass Spectrometer (ICP-MS). The ORNL 38H adsorbent had a 56 day adsorption capacity of 3.30 ± 0.68 g U/ kg adsorbent (normalized to a salinity of 35 psu), a saturation adsorption capacity of 4.89 ± 0.83 g U/kg of adsorbent material (normalized to a salinity of 35 psu) and a half-saturation time of 28 ± 10 days. The AF1 adsorbent material had a 56 day adsorption capacity of 3.9 ± 0.2 g U/kg adsorbent material (normalized to a salinity of 35 psu), a saturation capacity of 5.4 ± 0.2 g U/kg adsorbent material (normalized to a salinity of 35 psu) and a half saturation time of 23 ± 2 days. The ORNL amidoxime-based adsorbent materials are not specific for uranium, but also adsorb other elements from seawater. The major doubly charged cations in seawater (Ca and Mg) account for a majority of the cations adsorbed (61% by mass and 74% by molar percent). For the ORNL AF1 adsorbent material, U is the 4th most abundant element adsorbed by mass and 7th most abundant by molar percentage

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy properties of solid fossil fuels and solid biofuels

The paper deals about the problematic of energy properties of solid biofuels in comparison with solid fossil fuels. Biofuels are alternative to fossil fuels and their properties are very similar. During the experiments were done in detail experiments to obtain various properties of spruce wood pellets and wheat straw pellets like biofuels in comparison with brown coal and black coal like fossil fuels. There were tested moisture content, volatile content, fixed carbon content, ash content, elementary analysis (C, H, N, S content) and ash fusion temperatures. The results show that biofuels have some advantages and also disadvantages in comparison with solid fossil fuels.

01 COAL, LIGNITE, AND PEAT↗

Siderophores and secondary metabolites produced by Ganoderma adspersum

Ganoderma adspersum is a white-rot wood-degrading basidiomycete of ecological, biotechnological and medicinal interest. In addition to its role in lignin degradation, it produces bioactive metabolites with reported antimicrobial and antioxidant activities. However, the mechanisms of iron acquisition, including siderophore-mediated pathways, remain poorly characterized in Ganoderma species. Improved understanding of these systems is essential to elucidate their contributions to fungal physiology, secondary metabolism and ecological adaptation. In this study, the genome of G. adspersum was sequenced for the first time and screened for genes that may be involved in the production of secondary metabolites. A gene cluster was identified as potentially involved in iron uptake. In particular, genes related to non-ribosomal peptide synthetases were detected next to a gene encoding a monooxygenase and indicated a potential hydroxamate-family siderophore. Liquid chromatography (LC)-ES-MS analysis of secondary metabolites secreted by G. adspersum into the growth medium under iron-limiting conditions revealed a group of previously undescribed siderophores. Genome and MS/MS analysis suggested that these structures might be related to the coprinoferrin family of siderophores. Aside from siderophores, the genome and LC-MS analysis revealed G. adspersum to be a prolific producer of a variety of triterpenoids and sesquiterpenoids, in agreement with previous findings. This is the first description of the genome sequence of G. adspersum and its siderophores.

Reyes, Carolina [Laboratory for Cellulose and Wood↗

Biomass Resource Allocation among Competing End Uses

The Biomass Scenario Model (BSM) is a system dynamics model developed by the U.S. Department of Energy as a tool to better understand the interaction of complex policies and their potential effects on the biofuels industry in the United States. However, it does not currently have the capability to account for allocation of biomass resources among the various end uses, which limits its utilizationin analysis of policies that target biomass uses outside the biofuels industry. This report provides a more holistic understanding of the dynamics surrounding the allocation of biomass among uses that include traditional use, wood pellet exports, bio-based products and bioproducts, biopower, and biofuels by (1) highlighting the methods used in existing models' treatments of competition forbiomass resources; (2) identifying coverage and gaps in industry data regarding the competing end uses; and (3) exploring options for developing models of biomass allocation that could be integrated with the BSM to actively exchange and incorporate relevant information.

09 BIOMASS FUELS↗

Dry Kraft Pulping at Ambient Pressure for Cost Effective Energy Saving and Pollution Deduction

Sponsored by the DOE Industrial Energy Efficiency Grand Challenge program, our research team at the Georgia Institute of Technology conducted laboratory studies and confirmed the concept of making wood pulp using a dry pulping technology. This technology is a new process different from any prior pulping technology used in Kraft and CTMP pulping. Three different kinds of dry pulping methods were investigated. (a) Dry Pulping at Atmospheric Pressure: The first one is to dry and bake the pretreated woodchips in a conventional oven at atmospheric pressure without the use of a catalyst.

09 BIOMASS FUELS↗

Comparison of Mechanical Properties of Lignin/High-Density Polyethylene (HDPE) Composites and Wood/HDPE Composites

Lignin is a plant-derived, the second most abundant natural polymer, and a waste byproduct of the pulp industry. Incorporation of lignin into plastic composites using scalable approaches is commercially favored and low carbon-cost. Potential end applications for lignin plastic composites (LPCs) could be found in buildings and furniture where wood plastic composites (WPCs) are used in various components. This study compares the mechanical properties of LPCs and WPCs, aiming at the examination of the viability of the use of LPCs as alternative materials to WPCs in the building industry. Sodium ligninsulfonate (SLS)-based LPC blended with high-density polyethylene (HDPE) (45 wt.%) and maleic anhydride grafted polyethylene (MAPE) as a compatibilizer (5 wt.%) reached flexural strength (35.17 and 30.92 MPa respectively) and moduli (2.87 and 1.79 GPa respectively) comparable to benchmarking WPCs. Lignin dealkaline (LD)-based LPC exhibited higher ultimate strain but lower strength than SLS-based LPC, probably due to fragmentation during the post-sulfite treatment steps.

cellulose and other wood products↗

Shotgun proteome profile of Populus developing xylem

Understanding the molecular pathways of plant cell wall biosynthesis and remodeling is central to interpreting biological mechanisms underlying plant growth and adaptation as well as leveraging that knowledge towards development of improved bioenergy feedstocks. Here we report the application of shotgun tandem mass spectrometry profiling to the proteome of Populus developing xylem. Additionally, we mined public databases to obtain information in support of subcellular localization, transcript-level expression, and functional categorization of these proteins. Nearly 6000 different proteins were identified from the xylem proteome, with over 4400 proteins identified from one or more unique peptides. In addition to finding protein-level evidence of candidate wall biosynthesis genes from xylem (wood) tissue such as cellulose synthase, phenylalanine ammonia-lyase, and 4-coumarate:CoA ligase, several other potentially new candidate genes in the pathway were discovered. In order to identify low-abundance DNA-regulatory proteins from the developing xylem, a selective nuclear proteome profiling method was developed. Several putative transcription factor and chromatin remodeling proteins were identified using this method, such as LIM and NAC domain transcription factors and CHB3-SWI/SNF-related proteins. Further application of these proteomics methods will enhance understanding not only of cell wall biosynthesis in system biology modeling, but also other plant developmental and physiological pathways.

09 BIOMASS FUELS↗

Crystal structures of MW1337R and lin2004: Representatives of a novel protein family that adopt a four-helical bundle fold

To extend the structural coverage of proteins with unknown functions, we targeted a novel protein family (Pfam accession number PF08807, DUF1798) for which we proposed and determined the structures of two representative members. The MW1337R gene of Staphylococcus aureus subsp. aureus Rosenbach (Wood 46) encodes a protein with a molecular weight of 13.8 kDa (residues 1-116) and a calculated isoelectric point of 5.15. The lin2004 gene of the nonspore-forming bacterium Listeria innocua Clip11262 encodes a protein with a molecular weight of 14.6 kDa (residues 1-121) and a calculated isoelectric point of 5.45. MW1337R and lin2004, as well as their homologs, which, so far, have been found only in Bacillus, Staphylococcus, Listeria, and related genera (Geobacillus, Exiguobacterium, and Oceanobacillus), have unknown functions and are annotated as hypothetical proteins. The genomic contexts of MW1337R and lin2004 are similar and conserved in related species. In prokaryotic genomes, most often, functionally interacting proteins are coded by genes, which are colocated in conserved operons. Proteins from the same operon as MW1337R and lin2004 either have unknown functions (i.e., belong to DUF1273, Pfam accession number PF06908) or are similar to ypsB from Bacillus subtilis. The function of ypsB is unclear, although it has a strong similarity to the N-terminal region of DivIVA, which was characterized as a bifunctional protein with distinct roles during vegetative growth and sporulation. In addition, members of the DUF1273 family display distant sequence similarity with the DprA/Smf protein, which acts downstream of the DNA uptake machinery, possibly in conjunction with RecA. The RecA activities in Bacillus subtilis are modulated by RecU Holliday-junction resolvase. In all analyzed cases, the gene coding for RecU is in the vicinity of MW1337R, lin2004, or their orthologs, but on a different operon located in the complementary DNA strand. Here, we report the crystal structures of MW1337R and lin2004, which were determined using the semiautomated, high-throughput pipeline of the Joint Center for Structural Genomics (JCSG), part of the National Institute of General Medical Sciences Protein Structure Initiative.

09 BIOMASS FUELS↗

Probabilistic ecological risk assessment and source apportionment of polycyclic aromatic hydrocarbons in surface sediments from Yellow Sea

Based on the concentrations of polycyclic aromatic hydrocarbons (PAHs) in 12 surface sediment samples from Yellow Sea, the relative risk of 9 PAHs was investigated using joint risk probability distribution curves and overlapping area, which were generated based on the distributions of exposure and acute toxicity data (LC50), and the sources of PAHs were apportioned using principal component analysis. It was found that joint probability curve and overlapping area indicated the acceptable ecological risk of individual PAHs, only a small fraction of the benthic organisms was affected. Among the nine PAHs studied, the overall risk of pyrene was the highest, with that of naphthalene the lowest. For lower exposure levels at which the percentage of species affected was less than 10%, the risk associated with phenanthrene and fluorene were clearly higher than that of the other seven PAHs. It was indicated that PAHs in surface sediments mainly originated from vehicular emissions, coal combustion sources, coke oven emission and wood combustion, petroleum origin made little influence on sources of PAHs by PCA.

01 COAL, LIGNITE, AND PEAT↗

Historical Pollution and Source Contributions of PAHs in Sediment Cores from the Middle Reach of Huai River, China

To investigate the spatial and historical distributions, and source contributions of polycyclic aromatic hydrocarbon (PAHs) from the middle reach of Huai River, 15 surface sediments and two sediment cores were analyzed. The Σ{sub 16} PAHs levels in surface sediments varied from 533.15 to 1422.83 ng/g dw, and from 413.27 to 43951.56 ng/g dw in individual sediment layer of sediment cores. The temporal trends of PAHs in sediment cores are the good indicators of the anthropogenic emissions over the last 60 years. The stable carbon isotope ratios of PAHs indicate the primary PAHs sources were the combustion of wood and coal during 1950s–1970s, and automobile exhausts and the coal combustion emissions in recent decades.

54 ENVIRONMENTAL SCIENCES↗

Shape Optimization for Navier-Stokes Equations with Algebraic Turbulence Model: Existence Analysis

We study a shape optimization problem for the paper machine headbox which distributes a mixture of water and wood fibers in the paper making process. The aim is to find a shape which a priori ensures the given velocity profile on the outlet part. The mathematical formulation leads to an optimal control problem in which the control variable is the shape of the domain representing the header, the state problem is represented by a generalized stationary Navier-Stokes system with nontrivial mixed boundary conditions. In this paper we prove the existence of solutions both to the generalized Navier-Stokes system and to the shape optimization problem.

97 MATHEMATICS AND COMPUTING↗

Sustainable Use of Coffee Husks For Reinforcing Polyethylene Composites

The utilization of the coffee husk fiber (CHF) from the coffee industry as a reinforcing filler in the preparation of a cost-effective thermoplastic based composite was explored in this study. The chemical composition and thermal properties of the CHF were investigated and compared with those of wood fiber (WF). CHF proved to be mainly composed of cellulose, hemicellulose and lignin, and exhibited similar thermal behavior to WF. High density polyethylene (HDPE) composites with CHF loadings of from 40 to 70% were prepared using melt processing and extrusion. The processing properties, mechanical behavior, water absorption and thermal performance of these composites were investigated. The effect of maleated polyethylene (MAPE) used as a coupling agent on the composite was explored. The experimental results showed that increasing the CHF loading in the HDPE matrix resulted in an increase in the modulus and thermal properties of the composites, but resulted in poor water resistance. The addition of a 4% MAPE significantly improved the interfacial behavior of the hydrophilic lignocellulosic fiber and the hydrophobic polymer matrix.

36 MATERIALS SCIENCE↗

Effect of Natural and Accelerated Aging on the Mechanical Performance of a Composite Based on Recycled Multilayer Carton

A composite elaborated from waste material was studied for its proposed use as a wood plastic composite. Multilayer food cartons and recycled high density polyethylene were used for the elaboration of laminates, in a proportion of 55% and 45% volume fraction, respectively. The samples were subjected to an aging in an accelerated weathering (AW) chamber for 0, 500, 1000 and 2000 h with UVB radiation, temperature and humidity cycles. Samples exposed to natural weathering (NW) for 0, 1300, 2600 and 5200 h, in a warm sub-humid environment were also studied, the aim being to elucidate a correlation of the useful lifespan of the material. In both cases, after the exposure, three-point bend tests were performed to evaluate the effect on the mechanical properties. The analysis of the degradation process was carried out by infrared spectroscopy, indicating that the AW and NW samples showed deterioration of the material in different proportions. By mean of thermal analysis, it was possible to associate the degradation with the appearance and/or growth of the endothermic peaks, showing a variation in the melting temperature as the time of exposure to AW and NW increased, resulting in a change in the crystallinity percentage. The modulus of rupture (MOR) and the flexural modulus of elasticity decreased by 20% in samples subjected to AW for 2000 h; while in the samples exposed to NW, required of 5200 h to obtain a reduction of 16% in the MOR.

36 MATERIALS SCIENCE↗

Versatile and Biomass Synthesis of Iron-based Nanoparticles Supported on Carbon Matrix with High Iron Content and Tunable Reactivity

Iron-based nanoparticles supported on carbon (FeNPs{at}C) have enormous potential for environmental applications. Reported is a biomass-based method for FeNP{at}C synthesis that involves pyrolysis of bleached wood fiber pre-mixed with Fe{sub 3}O{sub 4} nanoparticles. This method allows synthesis of iron-based nanoparticles with tunable chemical reactivity by changing the pyrolysis temperature. The FeNP{at}C synthesized at a pyrolysis temperature of 500 C (FeNP{at}C-500) reacts violently (pyrophoric) when exposed to air, while FeNP{at}C prepared at 800 C (FeNP{at}C-800) remains stable in ambient condition for at least 3 months. The FeNPs in FeNP{at}C-800 are mostly below 50 nm in diameter and are surrounded by carbon. The immediate carbon layer (within 5-15 nm radius) on the FeNPs is graphitized. Proof-of-concept environmental applications of FeNPs{at}C-800 were demonstrated by Rhodamine 6G and arsenate (V) removal from water. This biomass-based method provides an effective way for iron-based nanoparticle fabrication and biomass utilization.

09 BIOMASS FUELS↗

Contact pressure analysis to allow improved design for the clearing plate in a biomass comminution system

For biomass processing systems, feedstocks with small but equal sizes can improve flowability and thermochemical outputs. The Crumbler rotary shear system was designed to achieve such ideal feedstocks to reduce costs and energy throughout the biomass supply chain. Improving the wear resistance of major components in this system is important to decrease the cost. Accelerating the feedstock flow through the rotary shear machine plays an equivalent role of improving its efficiency. An analytical analysis and a finite-element analysis of the stationary clearing plate are presented in this work. Here, these tools are used to investigate the effect of contact surface curvature on the impact pressure. The optimized new clearing plate design is expected to improve the component’s lifetime and wood chips flowability. The field tests confirm that the trend of the new clearing plate design guided by FEA. The optimization method, model verification, and validation experience applied in this work can also be applied to other static components with similar simple contact wear problems.

09 BIOMASS FUELS↗