Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WASHINGTON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Spatio-temporal ion temperature and velocity measurements in a Z pinch using fast-framing spectroscopy

Ion Doppler spectroscopy (IDS) is a diagnostic technique that measures plasma ion temperature and velocity without perturbing the plasma with a physical probe. The ZaP-HD Flow Z-Pinch Experiment at the University of Washington uses this technique to resolve radial temperature and velocity profiles of a Z-pinch plasma. The pinch lifetime is approximately 100 ms, therefore diagnostics capable of sub-microsecond resolution are required to measure the evolution of temperature and velocity profiles. The previous IDS diagnostic system was only capable of collecting a single measurement during a plasma pulse. Here, an improved system has been developed to measure radially-resolved ion temperature and velocity for the entire Z-pinch lifetime. A Kirana 05M ultra-fast framing camera and SIL ultraviolet intensifier are used to record up to 100 spectra per plasma pulse. The temperature is computed from Doppler broadening of the carbon-III (229.687 nm) impurity ion radiation and the velocity from the Doppler shift of carbon-III. Measurements are able to resolve the evolution of the ion temperature and velocity over the course of a plasma pulse. The diagnostic has significantly reduced the number of pulses required and provides a more coherent measurement of plasma dynamics than the previous system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of injected flux and current temporal phasing on self-organization in the HIT-SI3 experiment

The HIT-SI3 device at the University of Washington uses three oscillating inductive helicity injectors to form and sustain spheromak plasma equilibria. By adjusting the temporal phase of the injector waveforms with respect to each other, the toroidal spectrum of the imposed perturbations can be controlled. Using a recently implemented GPU-based control system, the available mode spectra were explored experimentally by scanning the space of relative injector phasing. In this space, significant variation in the toroidal mode spectrum ($n$ = 1, 2, 3) of the perturbations was observed. Additionally, variation in characteristics of driven equilibria was also observed, including a ≈ $30$% range in toroidal current gain ($I$ $Φ$ / $I$ $Inj$ ). Experimental results are compared with both a composite-equilibria and nonlinear dynamic model, including extended MHD simulations using the NIMROD code and composite Taylor state equilibria computed using the PSI-Tet code. In conclusion, qualitative agreement is seen with the nonlinear models, but not with composite-equilibria models, suggesting the use of nonlinear models to better capture observed plasma dynamics and provide predictive use for future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Zap Energy approach to commercial fusion

Zap Energy is a private fusion energy company developing the sheared-flow-stabilized (SFS) Z-pinch concept for commercial energy production. Spun out from the University of Washington, these experimental and computational efforts have resulted in devices with quasi-steady DD fusion yields above 109 per pulse. These devices support scaling toward energy breakeven on existing devices as well as beyond to commercially relevant engineering fusion gains. This article discusses the strategy behind Zap's development path, which is derived directly from the engineering and scientific elegance of the confinement method. Without need for external confinement or heating technologies, the SFS Z pinch relies on plasma self-organization. This compact magnetic confinement technology could, in turn, provide the basis for a cost-effective fusion power plant, vastly reduced in complexity from its competitors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Charles Kittel

We discuss solid-state physicist Charles Kittel, a professor emeritus at the University of California, Berkeley, passed away peacefully at his home in Berkeley on 15 May 2019, two months before his 103rd birthday. Born in New York City on 18 July 1916, Charlie entered MIT in 1934. He moved to Cambridge University in 1936 and received his BA there two years later. He earned his PhD degree in 1941 from the University of Wisconsin–Madison, where his adviser was Gregory Breit. From 1940 to 1942, Charlie worked on problems in degaussing and magnetic mine warfare at the Naval Ordnance Laboratory. He served in the US Navy as a research physicist at a British Admiralty research establishment in Scotland and as a naval attaché at the US Embassy in London; he went on to work on antisubmarine warfare and operations research in Washington, DC, and London. In 1945 he returned to MIT, taking a position in the Research Laboratory of Electronics.

99 GENERAL AND MISCELLANEOUS↗

Energy governed by the laws of physics

Robert Jaffe and Washington Taylor’s long-needed guide to the fundamentals of energy conversion contains an abundance of knowledge. Energy is an overwhelmingly sophisticated subject. Describing it in both depth and breadth is a Herculean task. The majority of introductory textbooks therefore offer generic, high-level overviews. But the devil is in the details; nuances are important to understanding the big picture and often dictate the feasibility of energy technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetic and structural studies, origins of selectivity, and interfacial charge transfer in the artificial photosynthesis of CO

The effective design of an artificial photosynthetic system entails the optimization of several important interactions. Herein we report stopped-flow UV-Vis spectroscopy, X-ray crystallography, DFT, and electrochemical kinetic studies of the Re(bipy-tBu)(CO)3(L) catalyst system. A remarkable selectivity for CO2 over H+ was observed by stopped-flow UV-Vis spectroscopy of [Re(bipy-tBu)(CO)3]-. The pseudo-first order rate constant for the reaction with 10 mM CO2 in THF is 35 s-1. This is ca. 15-20 times faster than the reactions with water or methanol at the same concentration in THF. X-ray crystallography and DFT studies of the doubly-reduced anionic species suggest that the HOMO has mixed metal-ligand character rather than being purely dz 2, which is thought to aid catalytic selectivity by favoring binding of CO2 over H+. Electrocatalytic studies performed with the addition of Brönsted acids reveal a primary H/D kinetic isotope effect, indicating that transfer of protons to Re-CO2 is involved in the rate limiting step. Lastly, the effects of electrode surface modification on interfacial electron transfer between a semiconductor and catalyst were investigated and found to affect the observed catalytic rates up to seven-fold, indicating that the properties of the electrode surface should not be overlooked when developing a homogeneous artificial photosynthetic system. This research was supported at the University of Washington, Seattle by the Camille and Henry Dreyfus Postdoctoral Program in Environmental Chemistry (for a fellowship to A. J. M. M.), and, for funds to purchase the stopped-flow instrument, the U.S. National Institutes of Health 13 (Grant GM-50422 to JMM), and the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences.

Smieja, Jonathan M↗

Early Oligocene kelp holdfasts and stepwise evolution of the kelp ecosystem in the North Pacific

Kelp forests are highly productive and economically important ecosystems worldwide, especially in the North Pacific Ocean. However, current hypotheses for their evolutionary origins are reliant on a scant fossil record. Here, in this work, we report fossil hapteral kelp holdfasts from western Washington State, USA, indicating that kelp has existed in the northeastern Pacific Ocean since the earliest Oligocene. This is consistent with the proposed North Pacific origin of kelp associated with global cooling around the Eocene–Oligocene transition. These fossils also support the hypotheses that a hapteral holdfast, rather than a discoid holdfast, is the ancestral state in complex kelps and suggest that early kelps likely had a flexible rather than a stiff stipe. Early kelps were possibly grazed upon by mammals like desmostylians, but fossil evidence of the complex ecological interactions known from extant kelp forests is lacking. The fossil record further indicates that the present-day, multi-story kelp forest had developed at latest after the mid-Miocene climate optimum. In summary, the fossils signify a stepwise evolution of the kelp ecosystem in the North Pacific, likely enabled by changes in the ocean-climate system.

54 ENVIRONMENTAL SCIENCES↗

Increased flood exposure in the Pacific Northwest following earthquake-driven subsidence and sea-level rise

Climate-driven sea-level rise is increasing the frequency of coastal flooding worldwide, exacerbated locally by factors like land subsidence from groundwater and resource extraction. However, a process rarely considered in future sea-level rise scenarios is sudden (over minutes) land subsidence associated with great (>M8) earthquakes, which can exceed 1 m. Along the Washington, Oregon, and northern California coasts, the next great Cascadia subduction zone earthquake could cause up to 2 m of sudden coastal subsidence, dramatically raising sea level, expanding floodplains, and increasing the flood risk to local communities. Here, we quantify the potential expansion of the 1% floodplain (i.e., the area with an annual flood risk of 1%) under low (~0.5 m), medium (~1 m), and high (~2 m) earthquake-driven subsidence scenarios at 24 Cascadia estuaries. If a great earthquake occurred today, floodplains could expand by 90 km 2 (low), 160 km 2 (medium), or 300 km 2 (high subsidence), more than doubling the flooding exposure of residents, structures, and roads under the high subsidence scenario. By 2100, when climate-driven sea-level rise will compound the hazard, a great earthquake could expand floodplains by 170 km 2 (low), 240 km 2 (medium), or 370 km 2 (high subsidence), more than tripling the flooding exposure of residents, structures, and roads under the high subsidence scenario compared to the 2023 floodplain. Our findings can support decision-makers and coastal communities along the Cascadia subduction zone as they prepare for compound hazards from the earthquake cycle and climate-driven sea-level rise and provide critical insights for tectonically active coastlines globally.

Science & Technology - Other Topics↗

Movement and collision of Lagrangian particles in hydro-turbine intakes: a case study

Studies of the stress/survival of migratory fish during downstream passage through operating hydro-turbines are normally conducted to determine the fish-friendliness of units. One field approach consisting of recording extreme hydraulics with autonomous sensors is largely sensitive to the conditions of sensor release and the initial trajectories at the turbine intake. This study applies a modelling strategy based on flow simulations using computational fluid dynamics and Lagrangian particle tracking to represent the travel of live fish and autonomous sensor devices through hydro-turbine intakes. For the flow field calculation, the simulations were conducted with both a time-averaging turbulence model and an eddy-resolving technique. For the particle tracking calculation, different modelling assumptions for turbulence forcing, mass formulation, buoyancy, and release condition were tested. The modelling assumptions are evaluated with respect to data sets collected using a laboratory physical model and an autonomous sensor device deployed at Ice Harbor Dam (Snake River, State of Washington, U.S.A.) at the same discharge and release point as in the present computer simulations. We found an acceptable agreement between the simulated results and observed data and discuss relevant features of Lagrangian particle movement that are critical in turbine design and in the experimental design of field studies.

CFD↗

Cesium Removal from AP-105 Hanford Tank Waste Using Spherical Resorcinol Formaldehyde Resin

Spherical resorcinol formaldehyde (SRF) resin is planned to be used to remove cesium (137Cs) from the aqueous phases of Hanford tank wastes in preparation for their vitrification at the Waste Treatment and Immobilization Plant. SRF is an elutable organic ion exchanger that is projected to be used in up to 30multiple process cycles (load/elute/regeneration) before being disposal . Only two full process cycles have been tested using SRF on Hanford tank waste. This paper describes the test results of six complete load/elute cycles using the SRF in a lead/lag column format with 12 liters of Hanford tank waste supernatant collected from Tank AP-105. The testing exposed the SRF to the combined sources of degradation: chemical attack from dissolved oxygen, nitric acid, and tank waste components; physical stress from resin expansion and contraction; and beta and gamma radiolytic exposure. Process conditions, dictated by Washington River Protection Solutions, featured loading until the lag column effluent reached 10% of the waste acceptance criteria (a Cs decontamination factor of 6,000). Under these conditions the lead column was nearly fully loaded and the lag column was loaded with about 20% of the input Cs. Variations in process flowrates and elution volumes were investigated as part of the testing. Characteristics examined included degradation with cycling, mass transfer zones as a function of flowrate, Cs leakage into the ensuing process cycle, and analyte mass fractionation.

spherical resorcincol formaldehyde, ion exchange, ↗

Cesium Ion Exchange Testing Using Crystalline Silicotitanate with Hanford Tank Waste 241-AP-107

Pacific Northwest National Laboratory has been tasked with demonstrating the unit operations for the Low Activity Waste Pretreatment System with actual Hanford tank waste. Crystalline silicotitanate (CST) ion exchange media is planned to be used to remove cesium (137Cs) from the aqueous phases of the tank wastes. Washington River Protection Solutions requested that Hanford tank waste collected from tank 241-AP-107 be processed using conceived pretreatment steps (suspended solids removal by filtration, Cs removal by ion exchange), then vitrified. Removal of Cs from these wastes is an important processing step in preparing the waste for long-term safe storage. Bench-scale ion exchange testing with approximately 9 L of filtered AP-107 supernate was conducted using CST. Column testing was performed using prototypic LAWPS operations in a lead-lag column arrangement using 10-mL CST beds. Feed was processed until the lag column effluent reached the Hanford Tank Waste Treatment and Immobilization Plant waste acceptance criteria (WAC) for receiving supernatant waste for vitrification (a function of the Na and 137Cs concentrations), at which point, a new lag column was needed to continue processing and the original lag column was moved to the lead position. Greater than 99% of the Cs processed through the ion exchange system was collected on the CST in the columns. The AP-107 feed and column processing effluent underwent extensive characterization to better define waste characteristics and assess fractionation to the CST. Selected lead column samples were analyzed to assess particular metal analyte load characteristics. Results of these analyses will be discussed.

cesium exchange, Hanford tank waste, ion exchange↗

Impact of feed variability on cesium removal with multiple actual waste samples from the Hanford site

Here, the Tank Side Cesium Removal (TSCR) system, under development by Washington River Protection Solutions (WRPS), will send initial low-activity Hanford waste tank supernate feeds to the Hanford Waste Treatment and Immobilization Plant (WTP) Low-Activity Waste (LAW) Facility. In addition to entrained solids removal from the supernate, the primary goal of TSCR is to remove cesium-137 ( 137 Cs) by ion exchange, allowing contact handling of the liquid effluent product at WTP. Crystalline silicotitanate (CST) ion exchange media, manufactured by Honeywell UOP (product IONSIV™ R9140-B), was selected as the ion exchange media at TSCR. This lot of material was found to have superior performance in comparison to historic batches of CST. Ion exchange column and batch contact testing with supernate from Hanford tanks AP-105, AP-107 and AW-102 was performed to assess the impact of feed variability on system performance. These tests demonstrated that batch contact measurements provide a reasonable prediction of column capacities with some deviation in performance attributed to column dynamics. In addition, the variability in CST capacity for cesium in the various actual waste samples does not track with historical understanding of the competing cations, suggesting that tank waste samples contain other components that may significantly impact cesium loading.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Elevated Streamflows Increase Dam Passage by Juvenile Coho Salmon during Winter: Implications of Climate Change in the Pacific Northwest

Abstract A 4-year evaluation was conducted to determine the proportion of juvenile coho salmon Oncorhynchus kisutch passing Cowlitz Falls Dam, on the Cowlitz River, Washington, during winter. River and reservoir populations of coho salmon parr were monitored using radiotelemetry to determine if streamflow increases resulted in increased downstream movement and dam passage. This was of interest because fish that pass downstream of Cowlitz Falls Dam become landlocked in Riffe Lake and are lost to the anadromous population. Higher proportions of reservoir-released fish (0.391–0.480) passed Cowlitz Falls Dam than did river-released fish (0.037–0.119). Event-time analyses demonstrated that streamflow increases were important predictors of dam passage rates during the study. The estimated effect of increasing streamflows on the risk of dam passage varied annually and ranged from 9% to 75% for every 28.3 m3/s increase in streamflow. These results have current management implications because they demonstrate the significance of dam passage by juvenile coho salmon during winter months when juvenile fish collection facilities are typically not operating. The results also have future management implications because climate change predictions suggest that peak streamflow timing for many watersheds in the Pacific Northwest will shift from late spring and early summer to winter. Increased occurrence of intense winter flood events is also expected. Our results demonstrate that juvenile coho salmon respond readily to streamflow increases and initiate downstream movements during winter months, which could result in increased passage at dams during these periods if climate change predictions are realized in the coming decades. Received February 7, 2012; accepted July 31, 2012

Kock, Tobias J.↗

Loss of Genetic Integrity in Hatchery Steelhead Produced by Juvenile-Based Broodstock and Wild Integration: Conflicts in Production and Conservation Goals

Abstract We examined whether a supplementation program for steelhead Oncorhynchus mykiss in southwestern Washington could produce hatchery fish that contained genetic characteristics of the endemic population from which it was derived and simultaneously meet a production goal. Hatchery fish were produced for three consecutive years by using broodstock comprised of endemic juveniles that were caught in the wild and raised to maturity, and then the program transitioned to an integrated broodstock comprised of wild and hatchery adults that returned to spawn. Importantly, some auxiliary conservation-based husbandry protocols were attempted (i.e., pairwise mating between males and females) but not always completed due to insufficient broodstock and conflict between production and conservation goals. The hatchery met production goals in 6 of 9 years, but wild-type genetic integrity of hatchery fish was degraded every year. Specifically, we analyzed 10 microsatellites and observed a 60% reduction in the effective number of breeders in the hatchery (harmonic mean of hatchery, Nb = 45, compared with the wild, Nb = 111). Hatchery fish consequently displayed reduced genetic diversity and large temporal genetic divergence compared with wild counterparts. To ensure the benefit of conservation-based husbandry, spawning protocols should be based on scientific theory and be practical within the physical and biological constraints of the system. Finally, if conservation issues are considered to be the most important issue for hatchery propagation, then production goals may need to be forfeited. Received November 8, 2013; accepted February 19, 2014

Bingham, Daniel M.↗

Stock Differences in Growth, Smolting, and Early Male Maturation in Hatchery Spring Chinook Salmon: a Common-Garden Experiment

Abstract Hatchery spring Chinook Salmon Oncorhynchus tshawytscha from Parkdale Hatchery on the Hood River, Oregon, and Carson National Fish Hatchery (CNFH) on the Wind River, Washington, were reared under a common-garden experimental regime at CNFH over three consecutive brood years (2008–2010) to assess the effects of stock on smoltification and early male maturation. Rearing groups were monitored for size, percent solid (a surrogate for whole-body lipid), gill Na+,K+-ATPase activity, and rate of precocious maturation in males (i.e., age-2 minijack rate). Despite rearing of the stocks under identical conditions, the out-of-basin Hood River stock was significantly smaller throughout the study and at release as smolts, had lower whole-body lipid at release, and had lower gill Na+,K+-ATPase activity at release than the Carson stock; furthermore, the Hood River stock exhibited much higher mean minijack rates than the Carson stock (45% versus 23% of males). Using logistic regression, we demonstrated that the threshold size for initiation of early male maturation was significantly lower for the Hood River stock than for the Carson stock, suggesting a genetic basis for this life history difference. The present study highlights the importance of understanding how specific genotypes may respond differently to the unique environmental conditions in a given hatchery environment. These differences may in turn influence physiological and life history pathways that affect smolt-to-adult return rates and the demography of returning adults.

Spangenberg, Dina K.↗

Age and Method of Release Affect Migratory Performance of Hatchery Steelhead

Abstract Hatchery programs that are designed to aid recovery of natural populations of anadromous salmonids, including steelhead Oncorhynchus mykiss, require locally derived, natural-origin broodstock. In such programs, achieving smoltification size thresholds may require extending hatchery rearing beyond age 1. We compared out-migration survival and travel rates of 142,990 PIT-tagged steelhead smolts released at age 1 (S1 rearing strategy) or age 2 (S2 rearing strategy) over five release years at Winthrop National Fish Hatchery (WNFH, Okanogan County, Washington). An S2 rearing cycle produced larger smolts with more uniform size distributions, resulting in higher survival during the first portion of their out-migration than for S1 smolts in three of the five release years. The S2 smolts migrated more rapidly to the ocean than S1 smolts in all years except 2011 and arrived in the Columbia River estuary 5.4 d earlier on average than the S1 smolts. The S1 steelhead that did not leave during the volitional release were subsequently forced from the hatchery to measure their survival. Nonvolitional S1 migrants were smaller and had survival rates that were 2.3–66.3 times lower than those of S1 steelhead that left WNFH on their own. The same was true for S2 steelhead, but the magnitude of the survival difference between volitional migrants and fish forced from the raceways was less variable and ranged from 2.5- to 4.6-fold. We conclude that S2 rearing can be a successful strategy for producing smolts from local natural-origin broodstock, with out-migration survival and travel times that are equivalent to or better than those of S1 smolts produced from nonlocal broodstock. Received July 25, 2016; accepted March 31, 2017 Published online May 31, 2017

Tatara, Christopher P.↗

Development of a new airborne humidigraph system.

Modeling and measurements of aerosol properties is complicated by the hygroscopic behavior of the aerosols adding significant uncertainty to our best estimates of the direct effect aerosols exert on the radiative balance of the atmosphere. Airborne measurements of aerosol hygroscopicity are particularly challenging but critically needed. This motivated the development of a newly designed system which can measure the dependence of the aerosol light scattering coefficient (σsp) on relative humidity (RH), known as f(RH), in real-time at a rapid rate (<10 s) on an aerial platform. The new system has several advantages over existing systems. It consists of three integrating nephelometers and humidity conditioners for simultaneous measurement of the σsp at three different RHs. The humidity is directly controlled in exchanger cells without significant temperature disturbances and without particle dilution, heating or loss of volatile compounds. The single-wavelength nephelometers are illuminated by LED-based light sources thereby minimizing heating of the sample stream. The flexible design of the RH conditioners, consisting of a number of specially designed exchanger cells (driers or humidifiers), enables us to measure f(RH) under hydration or dehydration conditions (always starting with the aerosol in a known state) with a simple system re-configuration. These exchanger cells have been characterized for losses of particles using latex spheres and laboratory generated ammonium sulfate aerosols. Residence times of 6 - 9 s in the exchangers and subsequent lines is sufficient for most aerosols to attain equilibrium with the new water vapor content. The performance of this system has been assessed aboard DOE’s G-1 research aircraft during test flights over California, Oregon, and Washington.

Pekour, Mikhail S↗

Review: Waste-Pretreatment Technologies for Remediation of Legacy Defense Nuclear Wastes

The U.S. Department of Energy (DOE) is responsible for retrieving, immobilizing, and disposing of radioactive waste that has been generated during the production of nuclear weapons in the United States. The vast bulk of this waste material is stored in underground tanks at the Savannah River Site in South Carolina and the Hanford Site in Washington State. The general strategy for treating the radioactive tank waste consists of first separating the waste into high-level and low-activity fractions. This initial partitioning of the waste is referred to as pretreatment. Following pretreatment, the high-level fraction will be immobilized in a glass form suitable for disposal in a geologic repository. The low-activity waste will be immobilized in a waste form suitable for disposal at the respective site. This paper provides a review of recent developments in the application of pretreatment technologies to the processing of the Hanford and Savannah River radioactive tank wastes. Included in the review are discussions of 1) solid/liquid separations methods, 2) cesium separation technologies, and 3) other separations critical to the success of the DOE tank waste remediation effort. Also included is a brief discussion of the different requirements and circumstances at the two DOE sites that have in some cases led to different choices in pretreatment technologies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗