Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Volatilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Regional tectonic analysis of Venus as part of the Pioneer Venus guest investigator project

Over the past year, much of the tectonic analysis of Venus we have done has centered on global properties of the planet, in order to understand fundamental aspects of the dynamics of the mantle and lithosphere of Venus. We have developed convection models of the Earth and Venus. These models assume whole mantle internally-heated convection. The viscosity is temperature, volatile-content, and stress dependent. An initial temperature and volatile content is assumed, and the thermal evolution is tracked for 4.6 billion years. During this time, heating occurs by decay of radiogenic elements in the mantle, and degassing and regassing of volatiles takes place at the surface. For a model assuming plate tectonics as the primary heat loss mechanism, representing the Earth through most of it's history and perhaps Venus' earlier history, degassing of the mantle was found to occur rapidly (approximately 200 My) over a large range of parameters. Even for parameters chosen to represent extreme cases of an initially cool planet, low radiogenic heating, and large initial volatile complement, the mantle water content was degassed to an equilibrium value in about 2 By. These values may be applicable to the early Venus, if a large, Moon-forming impact on Earth resulted in efficient heating and loss of water, leaving Venus with a comparably greater volatile budget and less vigorous early convection. It may therefore be impossible to retain large amounts of water in the interior of Venus until the planet cools down enough for the 'cold-trap' effect to take place. This effect traps crust forming melts within the mantle due to a cusp in the solidus, causing these melts to refreeze at depth into a dense eclogite phase, which will inhibit ascent of this material to the surface. This effect, however, requires a hydrous mantle, so early loss of water might prevent it from taking place. Since without plate tectonics there is no mechanism for regassing volatiles into the mantle, as occurs on Earth at subduction zones, this means the interior of Venus would at present be almost completely dry. We have also calculated argon degassing, and mantle flow velocities. viscosities, and cooling rates in these models, and these values can provide constraints on present day mantle dynamics.

Williams, David R.↗
NASA NTRS1993

The effect of Na vapor on the Na content of chondrules

Chondrules contain higher concentrations of volatiles (Na) than expected for melt droplets in the solar nebula. Recent studies have proposed that chondrules may have formed under non-canonical nebular conditions such as in particle/gas-rich clumps. Such chondrule formation areas may have contained significant Na vapor. To test the hypothesis of whether a Na-rich vapor would minimize Na volatilization reaction rates in a chondrule analog and maintain the Na value of the melt, experiments were designed where a Na-rich vapor could be maintained around the sample. A starting material with a melting point lower that typical chondrules was required to keep the logistics of working with Na volatilization from NaCl within the realm of feasibility. The Knippa basalt, a MgO-rich alkali olivine basalt with a melting temperature of 1325 +/- 5 C and a Na2O content of 3.05 wt%, was used as the chondrule analog. Experiments were conducted in a 1 atm, gas-mixing furnace with the fO2 controlled by a CO/CO2 gas mixture and fixed at the I-W buffer curve. To determine the extent of Na loss from the sample, initial experiments were conducted at high temperatures (1300 C - 1350 C) for duration of up to 72 h without a Na-rich vapor present. Almost all (up to 98%) Na was volatilized in runs of 72 h. Subsequent trials were conducted at 1330 C for 16 h in the presence of a Na-rich vapor, supplied by a NaCl-filled crucible placed in the bottom of the furnace. Succeeding Knudsen cell weight-loss mass-spectrometry analysis of NaCl determined the P(sub Na) for these experimental conditions to be in the 10(exp -6) atm range. This value is considered high for nebula conditions but is still plausible for non-canonical environments. In these trials the Na2O content of the glass was maintained or in some cases increased; Na2O values ranged from 2.62% wt to 4.37% wt. The Na content of chondrules may be controlled by the Na vapor pressure in the chondrule formation region. Most heating events capable of producing chondrules are sufficient to volatile Na. Sodium volatilization reaction rates will be reduced to varying degrees from melt droplets, depending on the magnitude of the P(sub Na) generated. A combination of Na vapor during, and Na diffusion back into chondrules after, formation could maintain and/or enrich Na concentrations in chondrules.

Lewis, R. Dean↗
NASA NTRS1995

Influence of the vapor flux on temperature, density, and abundance distributions in a multicomponent, porous, icy body

We calculated the vapor flux of the icy components in the surface layer of a porous, short-period, Jupiter-class comet, in order to investigate the relationship of the observed relative molecular abundances in the coma with those in the nucleus. The model assumes a body containing one major ice component (H20) and up to three minor components of higher volatility (e.g., CO, CO2, CH3OH). The body's porous structure is modeled as a bundle of tubes with a given tortuosity and initially a constant pore diameter. The mass and energy equations for the different volatiles are solved simultaneously under appropiate boundary conditions. Heat is conducted by the matrix and carried by the vapors. The one-dimensional model includes radially inward and outward flowing vapor within the body, complete depletion of less volatile ices in outer layers, and recondensation of vapor in deeper, coller layers. As a result, we obtain the temperature and abundance distribution in the nucleus and the gas flux into the interior and into the coma for each of the volatiles at various positions in the orbit. The ratio of the gas flux of minor volatiles to that of H2) in the coma varies by several orders of magnitude throughout the orbit. Thus, the relative abundances of species observed in the coma are in most cases not the same as those in the nucleus. Results also indicate that it will be impossible to determine the relative abundances of ices more volatile than water from samples taken a few meters below the surface during a comet rendezvous mission. We made calculations for a wide range of different parameters, such as porosity, pore radius, and thermal conductivity of the matrix. To introduce the model we present typical results for a dust-free comet.

Benkhoff, J.↗
NASA NTRS1997

New Approaches to Waterproofing of Space Shuttle Insulating Materials

Future reusable space vehicles will be in service much more frequently than current space shuttles. Therefore, rapid reconditioning of spacecraft will be required. Currently, the waterproofing of space shuttles after each re-entry takes 72 hours and requires substantial labor. In addition, the currently used waterproofing reagent, DiMethylEthoxySilane (DMES), is considered toxic, and ethanol fumes are released during its hydrolytic activation. Consequently, a long time period, which is not acceptable for future operations, is needed to ensure that 0 the excess volatile compounds are removed before further maintenance of the space vehicle can be performed. The objective of this project was to assist NASA Ames in finding improved waterproofing systems by identifying suitable waterproofing agents that can be applied by vapor phase deposition and will be less toxic, bond more rapidly to the insulation material surface, and potentially have higher thermal stability than the DMES system. Several approaches to achieve faster waterproofing with less toxicity were assessed using the following alternatives: Reactive volatile compounds that are rapidly deposited by chemical bonding at the surface and leave no toxic volatiles. Reactive reagents that are the least toxic. Nonvolatile reagents that are very reactive and bond strongly to the insulating material surface. Three specific types of potential reagents were chosen for evaluation in this project: 1. Volatile reagents with Si-Cl functional groups for vapor deposition 2. Volatile reagents with Si-H functional groups for vapor deposition 3. Nonvolatile oligomeric or polymeric reactive siloxanes that are assumed to have higher thermal stability and/or strong bonding to the insulating material. The chemistry involved in the project was targeted at the generation of intermediates having reactive Si-OH bonds for the formation of either volatile species or polymeric species that bond rapidly to the surface and also cure rapidly. We focused on two chemical reactions@-hydrolysis of Si-Cl bonds and catalytic dehydrocoupling of Si-H bonds.

Blum, Yigal D.↗
NASA NTRS2001

Atomic Oxygen Interactions With Silicone Contamination on Spacecraft in Low Earth Orbit Studied

Silicones have been widely used on spacecraft as potting compounds, adhesives, seals, gaskets, hydrophobic surfaces, and atomic oxygen protective coatings. Contamination of optical and thermal control surfaces on spacecraft in low Earth orbit (LEO) has been an ever-present problem as a result of the interaction of atomic oxygen with volatile species from silicones and hydrocarbons onboard spacecraft. These interactions can deposit a contaminant that is a risk to spacecraft performance because it can form an optically absorbing film on the surfaces of Sun sensors, star trackers, or optical components or can increase the solar absorptance of thermal control surfaces. The transmittance, absorptance, and reflectance of such contaminant films seem to vary widely from very transparent SiOx films to much more absorbing SiOx-based films that contain hydrocarbons. At the NASA Glenn Research Center, silicone contamination that was oxidized by atomic oxygen has been examined from LEO spacecraft (including the Long Duration Exposure Facility and the Mir space station solar arrays) and from ground laboratory LEO simulations. The findings resulted in the development of predictive models that may help explain the underlying issues and effects. Atomic oxygen interactions with silicone volatiles and mixtures of silicone and hydrocarbon volatiles produce glassy SiOx-based contaminant coatings. The addition of hydrocarbon volatiles in the presence of silicone volatiles appears to cause much more absorbing (and consequently less transmitting) contaminant films than when no hydrocarbon volatiles are present. On the basis of the LDEF and Mir results, conditions of high atomic oxygen flux relative to low contaminant flux appear to result in more transparent contaminant films than do conditions of low atomic oxygen flux with high contaminant flux. Modeling predictions indicate that the deposition of contaminant films early in a LEO flight should depend much more on atomic oxygen flux than it does later in a mission.

Banks, Bruce A.↗
NASA NTRS2005

The Diversity of Martian Volcanic features as Seen in the MOC, THEMIS, and MOM Data Sets

This one-year project (which included one-year no-cost tension) focused on the evolution of the summit areas of Martian volcanoes. It extended the studies conducted under an earlier MDAP project (Grant NAG5-9576, Principal Investigator P. Mouginis- Mark). By using data collected from the Mars Orbiter Camera (MOC), Thermal Emission Imaging System (THEMIS), and the Mars Orbiter Laser Altimeter (MOLA) instruments, we tried to better understand the diversity of constructional volcanism on Mars, and hence further understand the eruption processes. By inspecting THEMIS and MOC data, we explored the following four questions: (1) Where might near-surface volatiles have been released at the summits of the Tharsis volcanoes? Is the trapping and subsequent remobilization of degassed volatiles [Scott and Wilson, 19991 adequate to produce eruptions responsible for extensive deposits such as the ones identified on Arsia Mons [Mouginis-Mark, 2002]? To answer this question, we investigated the diversity of eruption styles by studying the summit areas of Arsia, Pavonis and Ascraeus Montes. (2) What are the geomorphic characteristics of the valley system on Hecates Tholus, a volcano that we have previously proposed experienced explosive activity [Mouginis-Murk et al., 1982]? Our inspection of THEMIS data suggests that water release on the volcano took place over an extended period of time, suggesting that hydrothermal activity may have taken place here. (3) How similar are the collapse processes observed at Martian and terrestrial calderas? New THEMIS data provide a more complete view of the entire Olympus Mons caldera, thereby enabling the comparison with the collapse features at Masaya volcano, Nicaragua, to be investigated. (4) What can we learn about the emplacement of long lava flows in the lava plains of Eastern Tharsis? The result of this work provided a greater understanding of the temporal and spatial variations in the eruptive history of volcanoes on Mars, and the influence of the volatiles within the top few kilometers of the volcanic edifice. This relationship in turn pertains to the availability of volatiles (both juvenile magmatic volatiles and ground water contained within the near-surface rocks) and to magma supply rates at appreciable distances (tens to hundreds of kilometers) from the centers of volcanoes. Explosive volcanism on Mars, a major factor in the release of water at the surface, may have been driven not only by volatiles within the parental melt, but also by magma encountering water or ice at shallow depth within the volcano [Mouginis-Mark et al., 1982, 1988; Crown and Greeley, 1993; Robinson et al., 19931.

Mouginis-Mark, Peter J.↗
NASA NTRS2010

Miniature Low-Mass Drill Actuated by Flextensional Piezo Stack

Recent experiments with a flextensional piezoelectric actuator have led to the development of a sampler with a bit that is designed to produce and capture a full set of sample forms including volatiles, powdered cuttings, and core fragments. The flextensional piezoelectric actuator is a part of a series of devices used to amplify the generated strain from piezoelectric actuators. Other examples include stacks, bimorphs, benders, and cantilevers. These devices combine geometric and resonance amplifications to produce large stroke at high power density. The operation of this sampler/drill was demonstrated using a 3x2x1-cm actuator weighing 12 g using power of about 10-W and a preload of about 10 N. A limestone block was drilled to a depth of about 1 cm in five minutes to produce powdered cuttings. It is generally hard to collect volatiles from random surface profiles found in rocks and sediment, powdered cuttings, and core fragments. Toward the end of collecting volatiles, the actuator and the bit are covered with bellows-shaped shrouds to prevent fines and other debris from reaching the analyzer. A tube with a miniature bellows (to provide flexibility) is connected to the bit and directs the flow of the volatiles to the analyzer. Another modality was conceived where the hose is connected to the bellows wall directly to allow the capture of volatiles generated both inside and outside the bit. A wide variety of commercial bellows used in the vacuum and microwave industries can be used to design the volatiles capture mechanism. The piezoelectric drilling mechanism can potentially be operated in a broad temperature range from about-200 to less than 450 C. The actuators used here are similar to the actuators that are currently baselined to fly as part of the inlet funnel shaking mechanism design of MSL (Mars Science Laboratory). The space qualification of these parts gives this drill a higher potential for inclusion in a future mission, especially when considering its characteristics of low mass, small size, low power, and low axial loads for sampling.

Sherrit, Stewart↗
NASA NTRS2015

LAVA Subsystem Integration and Testing for the RESOLVE Payload of the Resource Prospector Mission: Mass Spectrometers and Gas Chromatography

The Regolith and Environment Science & Oxygen and Lunar Volatile Extraction (RESOLVE) payload is part of Resource Prospector (RP) along with a rover and a lander that are expected to launch in 2020. RP will identify volatile elements that may be combined and collected to be used for fuel, air, and water in order to enable deeper space exploration. The Resource Prospector mission is a key part of In-Situ Resource Utilization (ISRU). The demand for this method of utilizing resources at the site of exploration is increasing due to the cost of resupply missions and deep space exploration goals. The RESOLVE payload includes the Lunar Advanced Volatile Analysis (LAVA) subsystem. The main instrument used to identify the volatiles evolved from the lunar regolith is the Gas Chromatograph-Mass Spectrometer (GC-MS). LAVA analyzes the volatiles emitted from the Oxygen and Volatile Extraction Node (OVEN) Subsystem. The objective of OVEN is to obtain, weigh, heat and transfer evolved gases to LAVA through the connection between the two subsystems called the LOVEN line. This paper highlights the work completed during a ten week internship that involved the integration, testing, data analysis, and procedure documentation of two candidate mass spectrometers for the LAVA subsystem in order to aid in determining which model to use for flight. Additionally, the examination of data from the integrated Resource Prospector '15 (RP' 15) field test will be presented in order to characterize the amount of water detected from water doped regolith samples.

RESOLVE↗
NASA NTRS2016

Pluto and Charon Seen with the New Horizons Spacecraft

After nearly a decade en route, New Horizons flew through the Pluto system in July 2015. The encounter hemisphere of Pluto shows ongoing surface geological activity centered on a vast basin (Sputnik Planum [SP]*) containing a thick layer of volatile ices with a crater retention age no greater than approximately 10 Ma. Surrounding terrains show active glacial flow, apparent transport and rotation of large buoyant water-ice crustal blocks, and pitting, likely by sublimation erosion and/or collapse. Also seen are constructional mounds with central depressions, and ridges with complex bladed textures. Pluto has ancient cratered terrains up to approximately 4 Ga old that are fractured and mantled, and perhaps eroded by glacial processes. Charon does not appear to be currently active, but experienced major tectonism and resurfacing nearly 4 Ga ago. Imaging spectrometer observations of Pluto reveal the encounter hemisphere to be dominated by volatile ices of N2, CO, and CH4, along with non-volatile components that include H2O and tholins. The most volatile of Pluto's ices (N2 and CO) are especially prevalent in the western half of Tombaugh Regio (TR), and the strikingly flat Sputnik Planum basin, which lies a few km below surrounding elevations. The high mobility of N2 and CO ices enables SP's surface to refresh itself sufficiently rapidly that no impact craters are seen there. This likely occurs through a combination of solid state convective overturning and sublimation/ condensation that produces regular patterns of pits and ridges on scales of 102 to 103 m. In many areas, CH4 appears to favor topographically high regions. Its propensity to condense on ridges could play a role in forming the bladed terrain seen in Tartarus Dorsa. H2O can be discerned across much of Cthulhu Regio, and also in a few isolated spots. In many regions, H2O ice is associated with reddish tholin coloration. Pluto's atmosphere was probed with the radio science experiment (REX) and the Alice UV spectrometer, as well as imaging at high phase angles. The surface pressure, due mostly to N2, is approximately 11 microbars. Extensive multiple haze layers are seen in the images. Alice has detected hydrocarbons in addition to CH4 in the atmosphere. Since both are inert, H2O ice and tholin could have similar geological behaviors on Pluto, possibly including aeolian transport or mobilization by volatile ice glaciation. While Pluto's H2O ice is sculpted and at least partially veiled by more volatile ices, Charon's heavily cratered H2O ice is exposed globally. H2O ice spectral bands characteristic of crystalline ice are seen everywhere on the encounter hemisphere. Charon's north polar region is strikingly red, possibly the result of the unique thermal environment of Charon's poles, which become exceptionally cold during the long, dark winters. Extremely cold regions on Charon' could cold trap gases expanding outward from Pluto as ices, and thereby subject them to rapid radiolytic processing. Charon also exhibits a weak NH3 absorption band over most or all of its surface, with small local concentrations. Detailed results of the radio science, small satellite, particles and plasma, and atmosphere investigations are in press.

Pluto↗
NASA NTRS2016

Pluto's Global Surface Composition Through Pixel-by-Pixel Hapke Modeling of New Horizons Ralph LEISA Data

On July 14th 2015, NASA's New Horizons mission gave us an unprecedented detailed view of the Pluto system. The complex compositional diversity of Pluto's encounter hemisphere was revealed by the Ralph/LEISA infrared spectrometer on board of New Horizons. We present compositional maps of Pluto defining the spatial distribution of the abundance and textural properties of the volatiles methane and nitrogen ices and non-volatiles water ice and tholin. These results are obtained by applying a pixel-by-pixel Hapke radiative transfer model to the LEISA scans. Our analysis focuses mainly on the large scale latitudinal variations of methane and nitrogen ices and aims at setting observational constraints to volatile transport models. Specifically, we find three latitudinal bands: the first, enriched in methane, extends from the pole to 55degN, the second dominated by nitrogen, continues south to 35 degN, and the third, com- posed again mainly of methane, reaches 20 degN. We demonstrate that the distribution of volatiles across these surface units can be explained by differences in insolation over the past few decades. The latitudinal pattern is broken by Sputnik Planitia, a large reservoir of volatiles, with nitrogen playing the most important role. The physical properties of methane and nitrogen in this region are suggestive of the presence of a cold trap or possible volatile stratification. Furthermore our modeling results point to a possible sublimation transport of nitrogen from the northwest edge of Sputnik Planitia toward the south.

Protopapa, S.↗
NASA NTRS2018

Coordinated Microanalysis of Phosphates in High-Titanium Lunar Basalts

Laboratory studies of lunar apatite [Ca5(PO4)3(F,Cl,OH)] have been important for determining the volatile inventory of the interior and the roles volatiles played during the magmatic evolution of the Moon. It has been suggested that high-Ti mare basalts sample volatiles from a distinct reservoir in the lunar mantle. However, there is still debate surrounding the crystallization and post-crystallization history of apatite in those basalts. This information is required before we can use apatite to characterize the abundance or isotopic composition of volatiles in melts or magmatic source regions. Our goal is to investigate the mineral chemistry, crystal structure, and volatile inventory of phosphates in high-Ti basalts from Apollo 11, which will allow us to determine the crystallization history of apatite in these rocks and identify any potential secondary processes that have changed the volatile composition that apatite acquired from the melt.

Barnes, J. J.↗
NASA NTRS2020

Ag isotopic and chalcophile element evolution of the terrestrial and martian mantles during accretion: new constraints from Bi, Pd, and Ag metal-silicate partitioning.

The Earth’s timing of accretion and acquisition of moderately volatile compounds is uncertain. Hafnium-W and Mn-Cr isotopic data can bracket the timing of early planetary differentiation and core formation. The Ag-Pd system has also been utilized but its application has been limited by a lack of high pressure and temperature metal-silicate partitioning for Pd and Ag. Be-cause Ag (and Bi) are volatile chalcophile siderophile elements, understanding their early distribution can constrain the origin of volatile elements in differentiated bodies and planets. Unfortunately, neither Ag or Bi have been studied across the wide range of pressure and temperature conditions that are relevant to accretion and core-mantle differentiation. Here, new high-pressure and temperature multi-anvil metal-silicate equilibrium experiments for Bi and Ag have been carried out at conditions relevant to planetary accretion and metal silicate differentiation that allow a more refined and complete understanding of element partitioning during core formation. The new metal-silicate partitioning data utilized to predict the distributions of Bi, Pd, and Ag at conditions of accretion for Earth and Mars and show that the Pd/Ag ratio is significantly fractionated during accretion, allowing for the production of detectable 107Ag anomalies produced while 107Pd (half life = 6.5 M.y.) was still extant. Application of the new partitioning results to Earth shows that D(Bi) and D(Ag) (D = metal/silicate concentration ratio) are lowered due to the effect of pressure and Si alloyed in the metallic liquid, resulting in higher predicted mantle Bi and Ag abundances than in the bulk silicate Earth (BSE), as well as high and variable Pd/Ag. The unradiogenic Ag isotopic composition of the BSE could have been generated by early accretion of volatile-poor (high Pd/Ag) precursors, followed by later accretion of volatile–rich (low Pd/Ag) material, in agreement with earlier studies of Pd-Ag and Mn-Cr (Schönbächler et al., 2010). However, these main accretion phases would have to be followed by segregation of a sulfide liquid (at least 1.5% of magma ocean) at high pressures (>30 GPa), to explain the PUM Bi, Pd, and Ag, as well as Au, Pt, Cu and Ni concentrations as proposed previously. If the early accreted bulk Earth was volatile depleted with high Pd/Ag ratios, portions of the mantle may contain ancient domains that developed positive 107Ag isotopic anomalies (as also argued by noble gases, Nd, W, and Os isotopes). In comparison, Bi, Pd, and Ag concentrations in the martian mantle could have been set by simple metal-silicate equilibrium. Mars accreted and differentiated relatively rapidly, while also developing a deep magma ocean with a high Pd/Ag ratio that could have evolved positive 107Ag anomalies, in contrast to Earth. Measurements on shergottites may reveal these predicted Ag isotopic anomalies.

accretion↗
NASA NTRSDate not supplied

The Comet Astrobiology Exploration Sample Return (CAESAR) Mission

The Comet Astrobiology Exploration Sample Return (CAESAR) mission will acquire and return to Earth for laboratory analysis a minimum of 80 grams of surface material from the nucleus of comet 67P/Chur-yumov-Gerasimenko (67P). CAESAR will characterize the surface region sampled, preserve the collected sample in a pristine state, and return evolved volatiles by capturing them in a separate gas reservoir. NASA Goddard Space Flight Center provides project management, systems engineering, safety and mission assurance, contamination control, mission operations, and many other important functions. Northrop Grumman Space Systems will build the spacecraft, based on Dawn mission heritage, which like CAESAR, uses solar electric propulsion. CAESAR was selected by for Phase A study in the New Frontiers 4 Competition and will be proposed to New Frontiers 5.Collection of a sample from the surface of comet 67P is facilitated by a set of cameras that together provide images to support sample site selection, perform optical navigation, and document the sample before, during, and after col-lection. The sample is collected at the end of an arm during a 5-second touch-and-go (TAG) maneuver with the Sample Acquisition System (SAS)designed by Honeybee Robotics for the surface properties of comet 67P observed by the Rosetta mission. After sample collection, and while the sample is still cold (< -80°C), the TAG Arm inserts the sample container into the Sample Containment System (SCS) mounted inside the Sample Return Capsule (SRC). The SCS is sealed, preventing the sample from escaping into space. The sample is slowly warmed inside the SCS to enable sublimation of volatiles, which are collected in the Gas Containment System (GCS), a passively cooled gas reservoir. Separating the volatiles from the solid sample protects the solid sample from alteration. Once all sublimated H2O is transferred to the GCS, the GCS is sealed to capture the volatile sit contains, and the SCS is vented to space to maintain the solid sample under vacuum. The SCS vent is closed before Earth entry to prevent atmospheric contamination. Detailed laboratory analyses of the sample from 67P will trace the history of volatile reservoirs, delineate the chemical pathways that led from simple interstellar species to complex molecules, constrain the evolution of the comet, and evaluate the role of comets in delivering water and prebiotic organics to the early Earth. CAESAR will achieve these goals by carrying out coordinated sample analyses that will link macroscopic properties of the comet with microscale mineralogy, chemistry, and isotopic studies of volatiles and solids. Most of the sample (≥75%) will be set aside for analyses by generations of scientists using continually advancing tools and methods, yielding an enduring scientific treasure that only sample return can provide. This presentation will review development conducted during NF4 Phase A and discuss the NF5 mission concept.

A G Hayes↗
NASA NTRSDate not supplied

VIPER: Introduction to the Resource Prospecting Mission

With the Artemis Program, NASA plans to return humans to the Moon to stay, which means if there are local materials available, they could be deployed to help support extended lunar stays. Since the moon’s polar regions have confirmed the presence of volatiles, as revealed by LCROSS, LRO and other lunar missions, the next step is to understand the nature and distribution of those candidate resources and how they might be extracted. Recent studies have even indicated local volatiles could be processed into propellants and human life-supporting resources, significantly aiding in sustaining humans on the Moon, and eventually and later to support missions to Mars. The Volatiles Investigating Polar Exploration Resource (VIPER) is an in-situ resource utilization (ISRU) mission within NASA’s Science Mission Directorate (SMD), based on the pathfinding development of the Resource Prospector (RP) mission concept. This clever mission is targeting late 2023 and may spend over 100 days mapping and surveying four different Ice Stability Regions to understand the nature and distribution of water and volatiles already confirmed to be there, including measuring mineralogical content such as silicon and light metals from lunar regolith. The knowledge attained by a mission like VIPER could have many-fold benefits for space exploration, but also commercial applications. VIPER is an essential, early mission supporting the “moon rush” which has developed over the past few years, with both governments and commercial entities making their cases for lunar exploration. VIPER aims to understand just how the water-ice and other volatiles are distributed, both horizontally and vertically, enabling creation of volatiles resource maps, which will guide what might be required to harvest those resources at scale. With sufficient infrastructural investment, led by governments and then optimized by the commercial marketplace, VIPER will be a pathfinder mission addressing key decadal lunar science and early strategic knowledge gaps.

Daniel Andrews↗
NASA NTRSDate not supplied

Demonstration of a Lunar Water Extraction and Quantification Technique in a Relevant Environment

The presence of water ice in permanently shadowed regions on the lunar surface may enable a sustained human presence on the Moon with minimal need for consumables. The first step toward utilizing lunar water ice to advance human space exploration will be to determine the abundance, accessibility, and distribution of this valuable resource. This paper will describe the most recent test results from the Light Water Analysis and Volatile Extraction (Light WAVE) system that was designed to capture icy regolith samples acquired from a drill. Regolith samples are then weighed, sealed, and heated to release volatiles. Volatiles are captured in a volume with a known temperature and the ideal gas law is used to determine the total quantity of volatiles in the volume. The composition of the volatile mixture is determined using a mass spectrometer so that each volatile can be quantified. By quantifying the amount of water extracted from the regolith sample, and acquiring the mass of the sample, water concentration by mass can be determined. The goal of recent testing was to determine the accuracy of water quantification using a combination of ideal gas law and mass spectrometer analysis. The Light WAVE system maybe applied to future water ice investigation missions without an inherent limit to the number of samples that can be processed, and the system may also enable lunar water sample return.

Aaron J Paz↗
NASA NTRS2024

Bulk Major and Trace Elemental Composition of an Aggregate Sample From Asteroid Bennu

On September 24, 2023, NASA’s OSIRIS-REx mission returned a capsule to Earth carrying material from asteroid Bennu. This event was the first time a U.S. mission delivered pristine samples from an asteroid and is the largest asteroid sample return to date. As these samples represent some of the oldest, most primitive, and pristine materials available to us, and which originate from a known and well-studied asteroid, they allow us a rare opportunity to gain a better understanding of the formation and evolution of our solar system. Key to understanding the material returned from asteroid Bennu is establishing its bulk chemical composition. Previous studies have shown that each chondrite group has a distinct elemental composition. For the carbonaceous chondrites specifically, each group exhibits a distinct pattern of moderately and highly volatile elemental depletions, relative to CI chondrites. CI chondrites are considered the most primitive chondrite group and broadly represent the solar photosphere composition. The two most striking features of these depletion patterns is that the moderately volatile element depletions increase with decreasing 50% condensation temperature and then plateau out at abundances that roughly correlate with matrix abundance. Due to these distinctive patterns, bulk elemental composition has become an important classification tool for establishing the different chondrite groups and the connections between them. As such, determining the bulk chemical composition of the Bennu aggregates will help to test two mission hypothesis: “Bennu’s bulk elemental composition reflects that of its main parent asteroid and is similar to the composition of the Sun, with depletions in moderately to highly volatile elements” and “Bennu’s dominant lithologies are comparable in bulk mineralogy, petrology, and composition to the most aqueously altered carbonaceous chondrites” . Furthermore as the carbonaceous and non-carbonaceous chondrites are thought to have likely formed in the inner and outer protoplanetary disk, respectively (e.g., [8]), determining the bulk chemical compositions of the Bennu aggregates will also help test the major mission hypothesis that “Bennu's parent body formed beyond the snow line by accretion of material in the pro-toplanetary disk” . Regarding chondrite formation, observed elemental patterns have been successfully used to model how the mixing of volatile-rich and volatile-poor chondritic components can produce the observed carbonaceous chondrites groups. They have also been significant in investigating how volatilization processes influenced chondrite formation. As such, establishing bulk chemical compositions of the pristine Bennu samples is vital for understanding the asteroid, and solar system formation. To begin this processes, we analyzed the bulk major and trace elemental compositions of Bennu aggregates.

P Koefoed↗
NASA NTRSDate not supplied

Petrologic Comparison of High- and Low-Titanium Basalt Clasts Derived From ANGSA Core 73001

Volatile elements and compounds significantly influence the properties and behavior of magma, including ascent and eruptive processes. Basalts record a complicated history of the volatile species inherent to their parental magma, and the processes, such as degassing, that change these volatile inventories. On the Moon, outstanding questions remain concerning the behavior of magmatic volatiles and their roles in the evolution of lunar magmas and the formation of mare basalts. As part of the Apollo Next Generation Sample Analysis (ANGSA) program, we are investigating the petrogenesis of two basalt clasts collected from the recently processed Apollo 17 drive tube, 73001. Our team is studying the petrology of the two basalt clasts in 2D and 3D. Recent work has highlighted the utility of coupling traditional 2D methods with 3D measurements to better understand the crystallization and degassing histories of lunar lava flows. We are also investigating the volatile inventory of the samples through in situ studies of volatile-bearing phases, like apatite, to understand the eruptive signatures and degassing histories of low-titanium and high-titanium lunar basalts. At the upcoming conference, we will present the first detailed study of the 2D and 3D mineralogy, textures, 3D vesiculation, and chemistry of these basalt clasts to shed light on their magmatic, volcanic, and post-eruptive histories.

Basalt↗
DOE OSTI2021

Chemical vapor transport growth of two-dimensional transition-metal dichalcogenides

A two-dimensional transition-metal dichalcogenide layer is grown by reacting a non- or low-volatile source material with a volatilized halogen or halide compound to produce a volatilized composition comprising at least one reaction product. The volatilized composition is flowed through an open chamber of a tube furnace with a temperature gradient, wherein the temperature changes along a path through which the volatilized composition flows through the open chamber of the tube furnace. Where the temperature along the path in the open chamber is in a reaction-temperature range, the volatilized composition is deposited as a two-dimensional crystalline transition-metal dichalcogenide layer.

Modtland, Brian J.↗