Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

An experimental method to obtain the elastic strain energy function from torsion-tension tests

It is shown that by employing a torsion-tension test, it is possible to have a complete mapping near the origin of the two principal strain invariants associated with the rate of change of the strain energy function. However, the mathematical representation of the twist moment and normal forces vs strain and the strain energy function are complex. This problem is solved by using a set of solid cylindrical bars with different diameters such that the difference in diameter of two successive bars is small. The stress-strain equations can be grossly oversimplified by considering differences in twist moment and normal force as a function of difference in radius.

Peng, S. T. J.↗
NASA NTRS1976

An integrated approach to the remote sensing of floating ice

Review article on remote sensing applications to glaciology. Ice parameters sensed include: ice cover vs open water, ice thickness, distribution and morphology of ice formations, vertical resolution of ice thickness, ice salinity (percolation and drainage of brine; flushing of ice body with fresh water), first-year ice and multiyear ice, ice growth rate and surface heat flux, divergence of ice packs, snow cover masking ice, behavior of ice shelves, icebergs, lake ice and river ice; time changes. Sensing techniques discussed include: satellite photographic surveys, thermal IR, passive and active microwave studies, microwave radiometry, microwave scatterometry, side-looking radar, and synthetic aperture radar. Remote sensing of large aquatic mammals and operational ice forecasting are also discussed.

Campbell, W. J.↗
NASA NTRS1976

Scanning laser Doppler velocimeter system simulation for sensing aircraft wake vortices

A model that simulates the interaction of a laser-Doppler velocimeter with an aircraft wake flowfield is described. A hydrodynamic model is developed which represents the trailing vortex sheet and wind shear as discrete free vortices distributed over a two-dimensional grid. A sensor model is formulated for scanning both in range and in angle to produce a fan beam configuration without frequency translation. Output of this model is a frequency spectrum vs both range and angle. Once the spectrum is evaluated, simulations of the data analysis procedure are carried out. Patterns of various features of the signature are presented in range-elevation angle plots. The problem of locating the vortex centers is discussed as a pattern recognition problem and as a point target problem.

Thomson, J. A. L.↗
NASA NTRS1976

Body size and chronic acceleration

Experiments were conducted to study body composition as a function of acceleration (1-4.7 G) in mice and rats. It is shown that fat-free body mass is a predictable function of acceleration, and that of nine components of the fat-free body mass only skeletal muscle, liver and heart contributed to observed changes induced by delta G. Fat-free body mass was found to pass through a maximum at 1 G when it was plotted vs G for mice, rats and monkeys (1-4.7 G) and men (0-1 G).

Pitts, G. C.↗
NASA NTRS1976

Impact tensile testing of wires

The test consists of fixing one end of a wire specimen and allowing a threaded falling weight to strike the other. Assuming the dynamic stress in the wire to be a function only of its strain, energy considerations show for negligible wire inertia effects that the governing dynamic stress-strain law can be determined directly from impact energy vs. wire elongation data. Theoretical calculations are presented which show negligible wire inertia effects for ratios of wire mass to striking mass of the order of .01 or less. The test method is applied to soft copper wires and the dynamic stress-strain curve so determined is found to be about 30 percent higher than the corresponding static curve.

Dawson, T. H.↗
NASA NTRS1977

Superconductivity in sputtered CuMO6S8

Samples were prepared by melting the metals, followed by annealing to various temperatures. The result was a structurally weak material. Sputtered films on sapphire substrates were prepared and studied. The substrates give the films mechanical strength and permit easy attachment of electrical leads. Materials were characterized by X-ray diffraction, electron microscopy, electrical resistance vs. temperature, and critical current measurements. Some of the results on CuMo6S8 are presented.

Alterovitz, S.↗
NASA NTRS1977

Integrated payload and mission planning, phase 3. Volume 3: Ground real-time mission operations

The payloads tentatively planned to fly on the first two Spacelab missions were analyzed to examine the cost relationships of providing mission operations support from onboard vs the ground-based Payload Operations Control Center (POCC). The quantitative results indicate that use of a POCC, with data processing capability, to support real-time mission operations is the most cost effective case.

White, W. J.↗
NASA NTRS1976

United States benefits of improved worldwide wheat crop information from a LANDSAT system overview

The value of improvements in worldwide information on wheat crops provided by LANDSAT was measured in the context of world wheat markets. These benefits were based on exiting LANDSAT technical goals and assumed that information would be made available to the United States and other countries at the same time. The benefits to the United States of such public LANDSAT information on wheat crops were found to be 174 million dollars a year on the average. The benefits from improved wheat crop information compare favorably with the annual system's cost of about $62 million. A detailed empirical sample demonstration of the effect of improved information was developed. The history of wheat commodity prices for 1971-72 was reconstructed and the price changes from improved vs. historical information were compared.

Source record↗
NASA NTRS1976

Effect of atmospheric parameters on silicon cell performance

The effects of changing atmospheric parameters on the performance of a typical silicon solar cell were calculated. The precipitable water vapor content, airmass and turbidity were varied over wide ranges and the normal terrestrial distribution of spectral irradiance was studied. The cell short-circuit current was then computed for each spectral irradiance distribution using the cell spectral response. Data are presented in the form of calibration number (cell current/incident irradiance) vs. water vapor content or turbidity.

Curtis, H. B.↗
NASA NTRS1977

Exploratory study on the effects of novel diamine curing agents and isocyanate precursors on the properties on new epoxy and urethane adhesives

Aromatic diamines based on diphenyl sulfone and benzophenone were studied as epoxy adhesive curing agents. Previously found differences in adhesive strengths for meta vs para orientation were not found in these series. The use of aluminum and alumina as fillers in a m,m prime-methylene dianiline-cured epoxy adhesive was not found to be beneficial to adhesive strength. Alumina filled adhesives had much lower strength than unfilled adhesives. The unfilled m,m prime-methylene dianiline-based epoxy adhesive had excellent resistance to moisture relative to a p,p prime-methylene dianiline-based adhesive and maintained good strengths up to 250 F. A glass fiber composite based on a m,m prime-methylene dianiline-cured epoxy appeared to be equivalent to the p,p prime-methylene dianiline-cured epoxy as judged by short beam shear tests.

Glasgow, D. G.↗
NASA NTRS1977

The estimation of pointing angle and normalized surface scattering cross section from GEOS-3 radar altimeter measurements

The statistical error of the pointing angle estimation technique is determined as a function of the effective receiver signal to noise ratio. Other sources of error are addressed and evaluated with inadequate calibration being of major concern. The impact of pointing error on the computation of normalized surface scattering cross section (sigma) from radar and the waveform attitude induced altitude bias is considered and quantitative results are presented. Pointing angle and sigma processing algorithms are presented along with some initial data. The intensive mode clean vs. clutter AGC calibration problem is analytically resolved. The use clutter AGC data in the intensive mode is confirmed as the correct calibration set for the sigma computations.

Brown, G. S.↗
NASA NTRS1976

Saltation threshold on Mars - The effect of interparticle force, surface roughness, and low atmospheric density

Results are reported for wind-tunnel experiments performed to determine the threshold friction speed of particles with different densities. Experimentally determined threshold speeds are plotted as a function of particle diameter and in terms of threshold parameter vs particle friction Reynolds number. The curves are compared with those of previous experiments, and an A-B curve is plotted to show differences in threshold speed due to differences in size distributions and particle shapes. Effects of particle diameter are investigated, an expression for threshold speed is derived by considering the equilibrium forces acting on a single particle, and other approximately valid expressions are evaluated. It is shown that the assumption of universality of the A-B curve is in error at very low pressures for small particles and that only predictions which take account of both Reynolds number and effects of interparticle forces yield reasonable agreement with experimental data. Effects of nonerodible surface roughness are examined, and threshold speeds computed with allowance for this factor are compared with experimental values. Threshold friction speeds on Mars are then estimated for a surface pressure of 5 mbar, taking into account all the factors considered.

Iversen, J. D.↗
NASA NTRS1976

Influence of heat transfer on the stability of parallel flow between concentric cylinders

The stability of the parallel flow of water between concentric cylinders at different temperatures is investigated for infinitesimal velocity and pressure disturbances. Primary interest is in the effect of heat transfer and the radius ratio a/b on the critical point of the neutral stability curve. The results indicate a strong dependence of the critical eigenvalues on both the heat transfer and the radius ratio. The critical Reynolds number of the nonisothermal flow appears to approach a finite value as the inner radius approaches zero (pipe flow) by showing an inflection point on the curve of critical Reynolds number vs a/b.

Choo, Y. K.↗
NASA NTRS1976

Al-26 in Kenna and other ureilites

A description is presented of the results of a nondestructive analysis conducted with a 42-g slice of the Kenna ureilite. The sample was analyzed in a gamma-gamma coincidence counting system, using a dual-parameter, 4096-channel pulse height analyzer. Data concerning Al-26 and Ne-22/Ne-21 in ureilites and Chassigny are presented in a table. A graph shows the ratio of measured Al-26 activity to that calculated from elemental production rates vs spallation Ne-22/Ne-21 for ureilites and Chassigny. The significance of the data with respect to findings reported by Wilkening et al. (1973) is discussed.

Cressy, P. J.↗
NASA NTRS1976

Growth kinetics of gamma-prime precipitates in a directionally solidified eutectic, gamma/gamma-prime-delta

A directionally solidified eutectic alloy (DSEA), of those viewed as potential candidates for the next generation of aircraft gas turbine blade materials, is studied for the gamma-prime growth kinetics, in the system Ni-Nb-Cr-Al, specifically: Ni-20 w/o Nb-6 w/o Cr-2.5 w/o Al gamma/gamma-prime-delta DSEA. Heat treatment, polishing and etching, and preparation for electron micrography are described, and the size distribution of gamma-prime phase following various anneals is plotted, along with gamma-prime growth kinetics in this specific DSEA, and the cube of gamma-prime particle size vs anneal time. Activation energies and coarsening kinetics are studied.

Tewari, S. N.↗
NASA NTRS1976

Temperature dependence of the absorption edge of vitreous silica

During an investigation of the optical properties of high-purity vitreous silica (fused quartz), which is being developed by NASA as a reflective and ablative heat shield, some interesting properties of theoretical and experimental nature have become apparent which otherwise may have remained unnoticed. Of particular interest for the NASA application is the shift of the absorption edge toward longer wavelengths with increasing temperature. The results of studies of this shift and of the spectral dependence of the absorption edge are summarized in the present paper. Plots of the absorption edge and the absorption spectrum of fused quartz vs temperature are given and discussed.

Bates, C. W., Jr.↗
NASA NTRS1977

Development of a thermal diode heat pipe for cryogenic applications

The paper describes the development of a cryogenic thermal diode heat pipe for space flight applications. The diode has ethane working fluid, and uses the liquid blockage technique with an internal blocking orifice, to accomplish shutoff in the reverse mode. The pipe is 0.635 cm OD by 75.82 cm long including a 2.54 cc excess liquid reservoir. Experimental data are presented for forward mode throughput vs tilt, film coefficients, and reverse mode characteristics. Transport capacity is 1000 w-cm at 2.5 cm tilt. Evaporator and condenser film coefficients were 0.92 and 1.64 w/sq cm K, respectively.

Quadrini, J. A.↗
NASA NTRS1977

Suits reflectance models for wheat and cotton - Theoretical and experimental tests

Plant canopy reflectance models developed by Suits are tested for cotton and Penjamo winter wheat. Properties of the models are discussed, and the concept of model depth is developed. The models' predicted exchange symmetry for specular irradiance with respect to sun polar angle and observer polar angle agreed with field data for cotton and wheat. Model calculations and experimental data for wheat reflectance vs sun angle disagreed. Specular reflectance from 0.50 to 1.10 micron shows fair agreement between the model and wheat measurements. An Appendix includes the physical and optical parameters for wheat necessary to apply Suits' models.

Chance, J. E.↗