Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “System Operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Data collection operational support system, part 2

Calibrated signal-strength data obtained at 10 sites in the Rockies and NASA telemetry data regarding the signal levels in the ATS 6 spacecraft are presented along with methodology to use the data to compute the carrier-to-noise rations and signal-to-noise rations at each of the calibrated sites. The data and methodology are also used to estimate the median values of these quantities for sites in the Rockies, Alaska, and Appalachia. Results are discussed.

Source record↗
NASA NTRS1980

An operational software system for geosynchronous satellite navigation

A software system has been designed to provide navigation parameters during the VAS experiment of the GOES-4 mission along with annotation data for near real time image registration. The four functional subsystems of the software system, Data Base Management, Image Processing, Navigation, and Output, and the principal hardware components are characterized. The ability of the system to fulfil its two principal objectives is verified by results obtained from processing actual SMS-2 satellite imagery.

Koch, D. W.↗
NASA NTRS1984

Operational requirements - system concepts

Nine research areas that are most critical to the issue of cockpits for the single pilot are discussed. Helicopter are addressed in this report. They are as follows: (1) automation priority issues; (2) increased complexity of systems; (3) cockpit workload highest in navigation; (4) auto hover and flight trim controls; (5) voice technology in integrated form; (6) systems must have visual and auditory declutter modes; (7) cockpit should be designed to be NBC resistant; and (8) considerations for spillover to civilian public service.

Voorhees, J. W.↗
NASA NTRS1985

The Comet Rendezvous Asteroid Flyby project

The Comet Rendezvous Asteroid Flyby (CRAF) spacecraft will be provided by the first Mariner Mark II (MMII). The MMII is a modular spacecraft which can be inexpensively reconfigured for different missions beyond the inner solar system. The rationale for a comet rendezvous mission are discussed, taking into account the probability that comets alone retain evidence of the chemical and physical conditions under which all solar system bodies were formed. A description of the rationale for the study of asteroids on the Comet Rendezvous Asteroid Flyby Mission is also presented. On its way to the rendezvous with a comet, the spacecraft will fly by one or more asteroids. It is assumed that the target asteroids will include moderately large main-belt objects several tens to perhaps 100 kilometers in diameter. Attention is also given to mission details, the spacecraft system, and the missions operations system.

Draper, R. F.↗
NASA NTRS1988

The bit-error rate performance of a satellite microwave matrix switch

The matrix switch is a critical element of communications satellites using multiple-beam antennas and on-board switching. Two proof-of-concept models of a microwave matrix switch have been developed under NASA-sponsored contracts. These switches have undergone extensive testing at NASA Lewis Research Center to determine their operating characteristics in a system environment. The results of these tests indicate the effect of the matrix switch on the overall system operation.

Kerczewski, Robert J.↗
NASA NTRS1988

The bit-error rate performance of a satellite microwave matrix switch

The matrix switch is a critical element of communications satellites employing multiple beam antennas and on-board switching. Two proof-of-concept models of a microwave matrix switch have been developed under NASA-sponsored contracts. These switches have undergone extensive testing at NASA Lewis Research Center to determine their operating characteristics in a system environment. The results of these tests indicate the effect of the matrix switch on the overall system operation.

Kerczewski, Robert J.↗
NASA NTRS1989

Perceptual telerobotics

A sensory world modeling system, congruent with a human expert's perception, is proposed. The Experiential Knowledge Base (EKB) system can provide a highly intelligible communication interface for telemonitoring and telecontrol of a real time robotic system operating in space. Paradigmatic acquisition of empirical perceptual knowledge, and real time experiential pattern recognition and knowledge integration are reviewed. The cellular architecture and operation of the EKB system are also examined.

Ligomenides, Panos A.↗
NASA NTRS1989

The Information Science Experiment System - The computer for science experiments in space

The concept of the Information Science Experiment System (ISES), potential experiments, and system requirements are reviewed. The ISES is conceived as a computer resource in space whose aim is to assist computer, earth, and space science experiments, to develop and demonstrate new information processing concepts, and to provide an experiment base for developing new information technology for use in space systems. The discussion covers system hardware and architecture, operating system software, the user interface, and the ground communication link.

Foudriat, Edwin C.↗
NASA NTRS1989

Advanced technology satellite demodulator development

Ford Aerospace has developed a proof-of-concept satellite 8 phase shift keying (PSK) modulation and coding system operating in the Time Division Multiple Access (TDMA) mode at a data range of 200 Mbps using rate 5/6 forward error correction coding. The 80 Msps 8 PSK modem was developed in a mostly digital form and is amenable to an ASIC realization in the next phase of development. The codec was developed as a paper design only. The power efficiency goal was to be within 2 dB of theoretical at a bit error rate (BER) of 5x10(exp 7) while the measured implementation loss was 4.5 dB. The bandwidth efficiency goal was 2 bits/sec/Hz while the realized bandwidth efficiency was 1.8 bits/sec/Hz. The burst format used a preamble of only 40 8 PSK symbol times including 32 symbols of all zeros and an eight symbol unique word. The modem and associated special test equipment (STE) were fabricated mostly on a specially designed stitch-weld board although a few of the highest rate circuits were built on printed circuit cards. All the digital circuits were ECL to support the clock rates of from 80 MHz to 360 MHz. The transmitter and receiver matched filters were square-root Nyquist bandpass filters realized at the 3.37 GHz i.f. The modem operated as a coherent system although no analog phase locked (PLL) loop was employed. Within the budgetary constraints of the program, the approach to the demodulator has been proven and is eligible to proceed to the next phase of development of a satellite demodulator engineering model. This would entail the development of an ASIC version of the digital portion of the demodulator, and MMIC version of the quadrature detector, and SAW Nyquist filters to realize the bandwidth efficiency.

Ames, Stephen A.↗
NASA NTRS1990

Cargo launch vehicles to low earth orbit

There are two primary space transportation capabilities required to support both base programs and expanded mission requirements: earth-to-orbit (ETO) transportation systems and space transfer vehicle systems. Existing and new ETO vehicles required to support mission requirements, and planned robotic missions, along with currently planned ETO vehicles are provided. Lunar outposts, Mars' outposts, base and expanded model, ETO vehicles, advanced avionics technologies, expert systems, network architecture and operations systems, and technology transfer are discussed.

Austin, Robert E.↗
NASA NTRS1991

Non-developmental item computer systems and the malicious software threat

The following subject areas are covered: a DOD development system - the Army Secure Operating System; non-development commercial computer systems; security, integrity, and assurance of service (SI and A); post delivery SI and A and malicious software; computer system unique attributes; positive feedback to commercial computer systems vendors; and NDI (Non-Development Item) computers and software safety.

Bown, Rodney L.↗
NASA NTRS1991

A PC-based bus monitor program for use with the transport systems research vehicle RS-232 communication interfaces

Experiment critical use of RS-232 data busses in the Transport Systems Research Vehicle (TSRV) operated by the Advanced Transport Operating Systems Program Office at the NASA Langley Research Center has recently increased. Each application utilizes a number of nonidentical computer and peripheral configurations and requires task specific software development. To aid these development tasks, an IBM PC-based RS-232 bus monitoring system was produced. It can simultaneously monitor two communication ports of a PC or clone, including the nonstandard bus expansion of the TSRV Grid laptop computers. Display occurs in a separate window for each port's input with binary display being selectable. A number of other features including binary log files, screen capture to files, and a full range of communication parameters are provided.

Easley, Wesley C.↗
NASA NTRS1991

Expanded serial communication capability for the transport systems research vehicle laptop computers

A recent upgrade of the Transport Systems Research Vehicle (TSRV) operated by the Advanced Transport Operating Systems Program Office at the NASA Langley Research Center included installation of a number of Grid 1500 series laptop computers. Each unit is a 80386-based IBM PC clone. RS-232 data busses are needed for TSRV flight research programs, and it has been advantageous to extend the application of the Grids in this area. Use was made of the expansion features of the Grid internal bus to add a user programmable serial communication channel. Software to allow use of the Grid bus expansion has been written and placed in a Turbo C library for incorporation into applications programs in a transparent manner via function calls. Port setup; interrupt-driven, two-way data transfer; and software flow control are built into the library functions.

Easley, Wesley C.↗
NASA NTRS1985

An operational ASDAR system

The story of the Aircraft to Satellite Data Relay (ASDAR) program began when airline meteorologists realized that B-747's and other commercial jets provided cockpit displays of digital values for outside air temperature and winds. Later, when a few B-747's were used to carry portable air quality monitoring equipment for the Global Air Sampling Program (GASP), scientists at NASA-Lewis explored ways in which these digital values could be used to label data collected during the GASP flights. Digital values of GASP analyses were recorded along with digital values of location and altitude, time, winds, and temperature, obtained by microprocessors from within the host aircraft's avionics. These data suggested a way in which manually recorded in-flight meteorological reports could be replaced by an automatic system, which could record winds and air temperatures as often as desired. NASA's prototype ASDAR showed that automated data relay by meteorological geostationary satellites could be accomplished from an aircraft. Testing of the instruments and analyses of its data are examined.

Sparkman, James K., Jr.↗
NASA NTRS1994

Applications of massively parallel computers in telemetry processing

Telemetry processing refers to the reconstruction of full resolution raw instrumentation data with artifacts, of space and ground recording and transmission, removed. Being the first processing phase of satellite data, this process is also referred to as level-zero processing. This study is aimed at investigating the use of massively parallel computing technology in providing level-zero processing to spaceflights that adhere to the recommendations of the Consultative Committee on Space Data Systems (CCSDS). The workload characteristics, of level-zero processing, are used to identify processing requirements in high-performance computing systems. An example of level-zero functions on a SIMD MPP, such as the MasPar, is discussed. The requirements in this paper are based in part on the Earth Observing System (EOS) Data and Operation System (EDOS).

El-Ghazawi, Tarek A.↗
NASA NTRS1994

Development of use of an Operational Procedure Information System (OPIS) for future space missions

A MS-Windows based electronic procedure system, called OPIS (Operational Procedure Information System), was developed. The system consists of two parts, the editor, for 'writing' the procedure and the notepad application, for the usage of the procedures by the crew during training and flight. The system is based on standardized, structured procedure format and language. It allows the embedding of sketches, photos, animated graphics and video sequences and the access to off-nominal procedures by linkage to an appropriate database. The system facilitates the work with procedures of different degrees of detail, depending on the training status of the crew. The development of a 'language module' for the automatic translation of the procedures, for example into Russian, is planned.

Illmer, N.↗