Solid boost thrust decay control for stage separation.
Solid booster thrust decay control for payload or upper stage separation, noting inert slivers with auxiliary retrorockets as separation control
THRUST CONTROL↗
SEARCH · Engineering Papers
Results for “Staging”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Metallurgical and fluid dynamic results of a 2000-hour endurance test on a two-stage, 200- horse-power turbine in wet potassium vapor.
Metallurgical and fluid dynamic results of 2000-hr endurance test at high temperatures on two-stage 200 hp turbine in wet potassium vapor
FATIGUE LIFE↗
Propulsion requirements for reusable single-stage-to-orbit rocket vehicles
The conceptual design of a single-stage-to-orbit (SSTO) vehicle using a wide variety of evolutionary technologies has recently been completed as a part of NASA's Advanced Manned Launch System (AMLS) study. The employment of new propulsion system technologies is critical to the design of a reasonably sized, operationally efficient SSTO vehicle. This paper presents the propulsion system requirements identified for this near-term AMLS SSTO vehicle. Sensitivities of the vehicle to changes in specific impulse and sea-level thrust-to-weight ratio are examined. The results of a variety of vehicle/propulsion system trades performed on the near-term AMLS SSTO vehicle are also presented.
SEA LEVEL THRUST TO WEIGHT RAT↗
Lessons Learned from the Development of the MSL Descent Stage Propulsion System
Development of the MSL descent stage propulsion system required a number of new propulsion hardware developments incorporating technologies not normally found in spacecraft propulsion subsystems. These developments were driven by the relatively high (25,000 N) maximum thrust level and the requirement for precise throttling of the main engines. This paper presents lessons learned in the course of these developments, including surprises and anomalies discovered at both the component and subsystem levels.
Entry, Descent, and Landing (EDL)↗
Improvements in the Calibration of the NOAA-20 VIIRS Day-Night Band Low Gain Stage Using a Solar Diffuser
We aim to introduce and demonstrate several improvements that are applied to the on-orbit solar diffuser (SD) calibration of the day-night band (DNB) low gain stage (LGS) of the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the NOAA-20 satellite. The most important improvement is the expansion of the angular range, referred to “sweet spot”, from 4° to 7.8° in order to increase the number of fully-illuminated scans considered for the SD calculation. The increase in scan number enables the completion of on-orbit calibration using the SD within one orbit, compared with the multiple orbits approach, which is required in the current standard approach applied in operational DNB LGS calibration coefficients look-up tables (LUTs) updates. The NOAA-20 DNB LGS calibration coefficients have been derived with the new methodology and the results show a more stable, smoother, and less noisy trend when compared with the current standard approach. The results also demonstrate that the NOAA-20 VIIRS DNB overall on-orbit performance has been very stable.
NOAA-20↗
Development of a Test Article to Demonstrate the Long Duration Storage of Liquid Hydrogen via a Two-Stage Active Cooling Approach
A NASA team is developing a test article for the purpose of demonstrating the long duration storage of liquid hydrogen utilizing passive Cryogenic Fluid Management and cryocoolers via a two-stage active cooling approach. Funded by NASA’s Technology Demonstration Mission Program and managed by the Cryogenic Fluid Management Portfolio Project, the team is leveraging demonstrations conducted under pervious NASA activities to develop a fully integrated test article that will demonstrate the zero boil-off storage of liquid hydrogen. This paper discusses the previous activities being leveraged from NASA’s Cryogenic Propellant Storage and Transfer project, the test article design and build, hardware and instrumentation selections, control methodology, and the planned primary and secondary test objectives. The test article assembly and demonstration are both to be conducted in the East Test Area at NASA Marshall Space Flight Center and are currently scheduled for Fiscal Year 2024.
Active Cooling↗
NASA Team Develops a Test Article to Demonstrate “Zero Boil-Off” Storage of Liquid Hydrogen via Cryocoolers and a Two-Stage Cooling Approach
Funded by NASA’s Technology Demonstration Mission Program and managed by the Cryogenic Fluid Management Portfolio Project, a NASA team is developing a test article to demonstrate the “zero boil-off” storage of liquid hydrogen using active cooling (cryocoolers) and a two-stage cooling approach. The current state of the art for storage of liquid hydrogen on-orbit is on the order of hours while future missions may require storage for months or even years. To enable such extended storage durations, “near zero” propellant loss, or “zero boil-off”, must be achieved. This may be accomplished with the implementation of “near zero” leakage components, a high performing suite of passive technologies to minimize the environmental heat loads, and active cooling via cryocoolers to intercept and remove heat from the propellant tanks and associated structure. Of course, with any cryogenic vehicle and mission, a mass and power trade should be conducted to determine if it is indeed feasible to carry the additional dry mass associated with active cooling, or if one could simply carry additional propellants to accommodate propellant loss which is typically not an option for a long duration mission.
Hydrogen Storage↗
Scalable Energy System Expansion Under Uncertainty Using Multi-Stage Stochastic Optimization
The intermittent nature of renewable energy sources poses challenges for electrical grids. This is due to the variable and uncertain nature of the power output from these resources. These features of renewable generation are more relevant to energy system planning as grids reach higher penetration levels of renewable energy. We present approaches for energy system planning based on scalable computational approaches which enable explicit consideration of operational uncertainties in the planning process. Using multi-stage stochastic programming and the progressive hedging algorithm, we compute energy system expansion decisions on modified versions of the RTS-GMLC test system.
electrical↗
Scalable Energy System Expansion Under Uncertainty Using Multi-Stage Stochastic Optimization
The intermittent nature of power from renewable energy sources poses new challenges for electrical grids. This is due to the variable and uncertain nature of the power output from these resources. These features of renewable generation are becoming more relevant to energy system planning as grids reach higher penetration levels of renewable energy. In this presentation we present approaches for energy system planning based on scalable computational approaches which enable the explicit consideration of operational uncertainties in the planning process. Using multi-stage stochastic programming and the progressive hedging algorithm, we compute energy system expansion decisions on modified versions of the RTS-GMLC test system augmented with large amounts of renewable generation.
MATHEMATICS AND COMPUTING↗
Late-Stage Oxidation of C( sp 3 )─H Bonds with High Efficiency and Alkyl Group Dihydroxylation of Complex Molecules
Here, the late-stage oxidation of C(sp 3 )─H bonds is highly valuable for modulating the solubility and binding of bioactive compounds and for diversification of complex molecules. Undirected methods for C(sp 3 )─H oxidation are valuable for the installation of hydroxyl groups at sites remote from other functional groups present in the molecule, but existing catalysts are limited by low turnover numbers and lengthy ligand syntheses. Perfluorinated ruthenium porphyrins are highly active catalysts for the oxidation of alkyl C─H bonds, but the scope of the transformation with complex molecules under conditions of limiting substrate has not been investigated. We report that carbonylruthenium(II) tetrakis(pentafluorophenyl)porphyrin [Ru(TPFPP)(CO)] catalyzes the selective oxidation of tertiary C(sp 3 )─H bonds in a broad range of complex natural products and drugs, with turnover numbers as high as 1000, and the tolerance of the reaction to various functional groups was rapidly assessed by performing a model reaction in the presence of additives. We show how the combination of this undirected C(sp 3 )─H oxidation and a directed C(sp 3 )─H silylation and oxidation provides rapid access to highly oxidized, 1,2-diol derivatives of natural products by a formal dihydroxylation of an alkyl group.
Alcohols↗
B‐Staging and Crosslinking of Polycarbosilane at Room Temperature: Cure Mechanism and Properties
The viscosity of polycarbosilane (PCS) polymers is not advantageous for free forming. Various fillers and heat are used to obtain a formable paste. Due to the low yield stress, structures and preforms tend to slump or resin will flow out, especially during the curing of the polymer. B-staging of PCS allows for a more stable structure from room temperature until the full cure of the allyl groups occurs with heat. Additionally, hydrosilation is an effective means of crosslinking at room temperature and controlling viscosity. A network structure was formed in SMP-10 using silane and a vinyl-based crosslinker to bridge each polymer chain. Pt addition catalysts were added to enhance the increase in viscosity to make a lightly crosslinked gel to aid in thickening and forming and to improve the ceramic yield at 1000°C. In conclusion, this enables several options for controlling rheology and improving the properties of preceramic polymers to avoid slumping during curing.
inorganic polymers↗
Improved two–stage protein expression and purification via autoinduction of both autolysis and auto DNA/RNA hydrolysis conferred by phage lysozyme and DNA/RNA endonuclease
We report improved release of recombinant proteins in Escherichia coli, which relies on combined cellular autolysis and DNA/RNA autohydrolysis, conferred by the tightly controlled autoinduction of both phage lysozyme and the nonspecific DNA/RNA endonuclease from Serratia marcescens. Autoinduction occurs in a two–stage process wherein heterologous protein expression and autolysis enzymes are induced upon entry into stationary phase by phosphate depletion. Cytoplasmic lysozyme and periplasmic endonuclease are kept from inducing lysis until membrane integrity is disrupted. After cell harvest, the addition of detergent (0.1% Triton X–100) and a single 30 min freeze–thaw cycle results in >90% release of protein, green fluorescent protein. Here, this cellular lysis is accompanied by complete oligonucleotide hydrolysis. The approach has been validated for shake flask cultures, high–throughput cultivation in microtiter plates, and larger scale stirred–tank bioreactors. This tightly controlled system enables robust growth and resistance to lysis in routine media when cells are propagated and autolysis/hydrolysis genes are only induced upon phosphate depletion
59 BASIC BIOLOGICAL SCIENCES↗
Hydrolysis of lignocellulose by anaerobic fungi produces free sugars and organic acids for two–stage fine chemical production with Kluyveromyces marxianus
Development of the bioeconomy is driven by our ability to access the energy-rich carbon trapped in recalcitrant plant materials. Current strategies to release this carbon rely on expensive enzyme cocktails and physicochemical pretreatment, producing inhibitory compounds that hinder subsequent microbial bioproduction. Anaerobic fungi are an appealing solution as they hydrolyze crude, untreated biomass at ambient conditions into sugars that can be converted into value-added products by partner organisms. However, some carbon is lost to anaerobic fungal fermentation products. To improve efficiency and recapture this lost carbon, we built a two-stage bioprocessing system pairing the anaerobic fungus Piromyces indianae with the yeast Kluyveromyces marxianus, which grows on a wide range of sugars and fermentation products. In doing so we produce fine and commodity chemicals directly from untreated lignocellulose. P. indianae efficiently hydrolyzed substrates such as corn stover and poplar to generate sugars, fermentation acids, and ethanol, which K. marxianus consumed while producing 2.4 g/L ethyl acetate. An engineered strain of K. marxianus was also able to produce 550 mg/L 2-phenylethanol and 150 mg/L isoamyl alcohol from P. indianae hydrolyzed lignocellulosic biomass. Despite the use of crude untreated plant material, production yields were comparable to optimized rich yeast media due to the use of all available carbon including organic acids, which formed up to 97% of free carbon in the fungal hydrolysate. Furthermore, this work demonstrates that anaerobic fungal pretreatment of lignocellulose can sustain the production of fine chemicals at high efficiency by partnering organisms with broad substrate versatility.
59 BASIC BIOLOGICAL SCIENCES↗
The Effect of Surface Terminations on the Initial Stages of TiO 2 Deposition on Functionalized Silicon
As atomic layer deposition (ALD) emerges as a method to fabricate architectures with atomic precision, emphasis is placed on understanding surface reactions and nucleation mechanisms. ALD of titanium dioxide with TiCl 4 and water has been used to investigate deposition processes in general, but the effect of surface termination on the initial TiO 2 nucleation lacks needed mechanistic insights. Here, this work examines the adsorption of TiCl 4 on Cl–, H–, and HO– terminated Si(100) and Si(111) surfaces to elucidate the general role of different surface structures and defect types in manipulating surface reactivity of growth and non-growth substrates. The surface sites and their role in the initial stages of deposition are examined by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Density functional theory (DFT) computations of the local functionalized silicon surfaces suggest oxygen-containing defects are primary drivers of selectivity loss on these surfaces.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Pacific Lamprey Translocations to the Snake River Boost Abundance of All Life Stages
Abstract The Pacific Lamprey Entosphenus tridentatus is an anadromous fish that has severely declined in the Snake River basin. In 2007, the Nez Perce Tribe initiated translocation of adults to this region from the main‐stem Columbia River and has continued the translocations to this day. These actions are aimed at restoring larval abundance along with holistic habitat improvements. We performed parentage and sibship analyses with 260 single‐nucleotide polymorphism loci to monitor productivity of translocated lamprey over a decade (2007–2018). These results provide the first direct evidence that translocations boosted larval abundance, increased juvenile production in the interior Columbia River (~3% in 2017 and 2018), and demonstrated successful migration to the Pacific Ocean. Per capita juvenile production from Snake River adult lamprey translocations out‐performed that of their volitionally migrating counterparts in the interior Columbia River, demonstrating that translocating adults to suitable habitats increased overall productivity. We projected that the translocations may eventually return enough adult offspring to the Columbia River to replace the annual take of adults for translocations, despite many adults likely returning to other basins. These translocations are also restoring Pacific Lamprey to historical areas where they had been nearly extirpated, which has impactful benefits both culturally and ecologically. Further, this study provided an unprecedented volume of data that has redefined key biological attributes, including timing of life stage transformation (average of 6.7‐year‐old juveniles), larval growth rates (~22 mm/year for the first 4 years), ocean duration (average of 5.1 years), dispersal (~3% of Snake River‐origin adults that return to the Columbia River will divert to the Willamette River), and life span (median age of postspawn adults was 12.9 years). We even quantified a new biological phenomenon of delayed spawning, which occurs at low rates (~9%) in nature. These data provide an opportunity to monitor ongoing translocation efforts and inform adaptive management to aid species recovery.
Hess, Jon E.↗
Pre-equilibrium photons from the early stages of heavy-ion collisions
Abstract We use QCD kinetic theory to compute photon production in the chemically equilibrating Quark-Gluon Plasma created in the early stages of high-energy heavy-ion collisions. We do a detailed comparison of pre-equilibrium photon rates to the thermal photon production. We show that the photon spectrum radiated from a hydrodynamic attractor evolution satisfies a simple scaling form in terms of the specific shear viscosityη/sand entropy densitydS/dζ∼ (Tτ 1/3 ) 3/2 ∞ . We confirm the analytical predictions with numerical kinetic theory simulations. We use the extracted scaling function to compute the pre-equilibrium photon contribution in$$ \sqrt{s_{NN}} $$ s NN = 2.76 TeV 0–20% PbPb collisions. We demonstrate that our matching procedure allows for a smooth switching from pre-equilibrium kinetic to thermal hydrodynamic photon production. Finally, our publicly available implementation can be straightforwardly added to existing heavy ion models.
Physics↗
Conceptual design of BabyIAXO, the intermediate stage towards the International Axion Observatory
This article describes BabyIAXO, an intermediate experimental stage of the International Axion Observatory (IAXO), proposed to be sited at DESY. IAXO is a large-scale axion helioscope that will look for axions and axion-like particles (ALPs), produced in the Sun, with unprecedented sensitivity. BabyIAXO is conceived to test all IAXO subsystems (magnet, optics and detectors) at a relevant scale for the final system and thus serve as prototype for IAXO, but at the same time as a fully-fledged helioscope with relevant physics reach itself, and with potential for discovery. The BabyIAXO magnet will feature two 10 m long, 70 cm diameter bores, and will host two detection lines (optics and detector) of dimensions similar to the final ones foreseen for IAXO. BabyIAXO will detect or reject solar axions or ALPs with axion-photon couplings down to g aγ ~ 1 . 5 × 10 -11 GeV -1 , and masses up to m a ~ 0.25 eV. BabyIAXO will offer additional opportunities for axion research in view of IAXO, like the development of precision x-ray detectors to identify particular spectral features in the solar axion spectrum, and the implementation of radiofrequency-cavity-based axion dark matter setups.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Temperature Dependent Early-Stage Oxidation Dynamics of Cu(100) Film with Faceted Holes
Fundamental understanding of surface oxidation dynamics is critical for rational corrosion protection and advanced manufacturing of nanostructured oxides. In situ environmental TEM (ETEM) provides high spatial (nano- to atomic- scale) and temporal (< 0.1 s) resolution to investigate the early-stage oxidation/corrosion dynamics of metals and alloys. Thin samples with facets are widely used to enable cross-sectional observation of the oxidation dynamics in ETEM. However, how different facet orientations oxidize under the same conditions, and how these facets change the oxidation process, has not been investigated before. Here, using in situ ETEM, we systematically compare the oxidation dynamics of Cu(001) thin films, with faceted holes exposing {100} and {110} facets at temperatures ranging from 250–600 °C under 0.03 Pa O 2 . Oxidation preference is observed to change, from Cu(110) facets at lower temperatures to Cu(100) facets at ~ 500 °C. Oxide growth mechanisms change from outward growth on Cu 2 O surfaces at low temperatures, to inward growth on Cu-Cu 2 O interfaces at high temperatures. At high temperatures (500–600 °C), a rod-like Cu 2 O morphology is observed, with side facets of ~ {024} and top facets of {100} on Cu(100). This differs from the square-shaped Cu 2 O exposing {110} facets formed on Cu(001) surfaces. Rod-like oxides exhibit directional growth along their lengths with linear growth rates, regardless of rod length and width. This suggests that O from Cu(001) surfaces, rather than Cu(100) facets, serves as an O source for oxide growth. These results show a direct comparison of oxidation at different orientations with temperature, underscoring the temperature dependence of oxidation preference. Our results also suggest future in situ ETEM experiments viewing oxidation corrosion cross-sectionally should be cautious when oxide size is comparable with sample thickness, as the oxidizing mechanism may change due to sample thickness.
36 MATERIALS SCIENCE↗