Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Marginal stability constraint on runaway electron distribution

High-frequency kinetic instabilities of the strongly anisotropic runaway electrons (RE) can enhance the pitch-angle scattering of the runaways significantly. This wave-induced scattering can easily prevail over runaway scattering on high-Z impurities. In a steady state, collisional damping balances the kinetic drive of the unstable waves, keeping the RE distribution function at marginal stability. The marginal stability constraint limits the achievable RE densities and the shape of the RE distribution function. In this study, we consider whistler and compressional Alfvén waves as the primary source of enhanced elastic scattering of the runaways. By balancing the anomalous Doppler resonance drive with the collisional wave damping, we find the RE distribution function in the ultra-relativistic range of the phase space. We also derive an expression for the spectral energy density of the waves. We show that the power needed to compensate for the wave dissipation is negligible compared to the work of the electric field. The latter is in balance with the synchrotron losses of the runaway electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Large eddy simulation of atmospheric boundary layer flow over complex terrain in comparison with RANS simulation and on-site measurements under neutral stability condition

Large eddy simulation (LES) of the atmospheric boundary layer (ABL) flow over complex terrain is presented with a validation using meteorological tower (met-tower) data through an improved neutral stability sampling approach. The proposed stability sampling procedure includes a condition based on the most-likely occurrence time-periods of the neutral ABL and reduces the variabilities of the conditional wind statistics calculated at the met-towers in comparison to our previous work. The ABL flow simulations are carried out over a potential wind site with a prominent hill based using the OpenFOAM-based simulator for on/off-shore wind farm applications by applying the Lagrangian-averaged scale-invariant dynamic sub-grid scale turbulence model. A low-dissipative scale-selective discretization scheme for the non-linear convection term in the LES governing equation is adopted implicitly to ensure both the second-order accuracy and bounded solution. The LES inflow is generated through a precursor method with a “tiling” approach based on the flow driving parameters obtained from a corresponding Reynolds-averaged Navier–Stokes (RANS) simulation. Overall, the averaged wind velocity profiles predicted by the LES approach at all met-tower locations show a similar tendency as the RANS results, which are also in reasonable agreement with the met-tower data. An obvious difference in wind speed standard deviation profiles is seen between LES and RANS, especially at regions downstream of the hill edge, where the LES shows under-predicted results at the highest measurement levels in comparison to the tower data. The computational costs of the LES are found to be about 20 times higher than the RANS simulations.

Energy & Fuels↗
DOE OSTI2023

Mg and Al-induced phase transformation and stabilization of Ga 2 O 3 -based $\gamma$-phase spinels

Ga 2 O 3 films were deposited on (100) MgAl 2 O 4 spinel substrates at 550, 650, 750, and 850 °C using metal-organic chemical vapor deposition and investigated using x-ray diffraction and transmission electron microscopy. A phase-pure γ-Ga 2 O 3 -based material having an inverse spinel structure was formed at 850 °C; a mixture of the γ-phase and β-Ga 2 O 3 was detected in films grown at 750 °C. Only β-Ga 2 O 3 was determined in the films deposited at 650 and 550 °C. A β- to γ-phase transition occurred from the substrate/film interface during growth at 750 °C. The growth and stabilization of the γ-phase at the outset of film growth at 850 °C was affected by the substantial Mg and Al chemical interdiffusion from the MgAl 2 O 4 substrate observed in the energy-dispersive x-ray spectrum. Further, atomic-scale investigations via scanning transmission electron microscopy of the films grown at 750 and 850 °C revealed a strong tetrahedral site preference for Ga and an octahedral site preference for Mg and Al. It is postulated that the occupation of these atoms in these particular sites drives the β-Ga 2 O 3 to γ-phase transition and markedly enhances the thermal stability of the latter phase at elevated temperatures.

42 ENGINEERING↗
DOE OSTI2023

Flexible, integrated modeling of tokamak stability, transport, equilibrium, and pedestal physics

The STEP (Stability, Transport, Equilibrium, and Pedestal) integrated-modeling tool has been developed in OMFIT to predict stable, tokamak equilibria self-consistently with core-transport and pedestal calculations. STEP couples theory-based codes to integrate a variety of physics, including magnetohydrodynamic stability, transport, equilibrium, pedestal formation, and current-drive, heating, and fueling. The input/output of each code is interfaced with a centralized ITER-Integrated Modelling & Analysis Suite data structure, allowing codes to be run in any order and enabling open-loop, feedback, and optimization workflows. This paradigm simplifies the integration of new codes, making STEP highly extensible. STEP has been verified against a published benchmark of six different integrated models. Core-pedestal calculations with STEP have been successfully validated against individual DIII-D H-mode discharges and across more than 500 discharges of the H98,y2 database, with a mean error in confinement time from experiment less than 19%. STEP has also reproduced results in less conventional DIII-D scenarios, including negative-central-shear and negative-triangularity plasmas. Predictive STEP modeling has been used to assess performance in several tokamak reactors. Simulations of a high-field, large-aspect-ratio reactor show significantly lower fusion power than predicted by a zero-dimensional study, demonstrating the limitations of scaling-law extrapolations. STEP predictions have found promising scenarios for an EXhaust and Confinement Integration Tokamak Experiment, including a high-pressure, 80%-bootstrap-fraction plasma. ITER modeling with STEP has shown that pellet fueling enhances fusion gain in both the baseline and advanced-inductive scenarios. Finally, STEP predictions for the SPARC baseline scenario are in good agreement with published results from the physics basis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Effects of diffusion barriers on reaction wave stability in Co/Al reactive multilayers

Bimetallic, reactive multilayers are uniformly structured materials composed of alternating sputter-deposited layers that may be ignited to produce self-propagating mixing and formation reactions. These nanolaminates are most commonly used as rapid-release heat sources. The specific chemical composition at each metal/metal interface determines the rate of mass transport in a mixing and formation reaction. The inclusion of engineered diffusion barriers at each interface will not only inhibit solid-state mixing but also may impede the self-propagating reactions by introducing instabilities to wavefront morphology. Here, this work examines the effect of adding diffusion barriers on the propagation of reaction waves in Co/Al multilayers. The Co/Al system has been shown to exhibit a reaction propagation instability that is dependent on the bilayer thickness, which allows for the occurrence of unstable modes in otherwise stable designs from the inclusion of diffusion barriers. Based on the known stability criteria in the Co/Al multilayer system, the way in which the inclusion of diffusion barriers changes a multilayer's heat of reaction, thermal conductivity, and material mixing mechanisms can be determined. These factors, in aggregate, lead to changes in the wavefront velocity and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

MHD stability of spherical tokamak equilibria with non-monotonic q-profiles

We use the 3D magnetohydrodynamic (MHD) code M3D-C1 [Jardin et al., Comput. Sci. Discovery 5, 014002 (2012)] to examine the MHD stability and subsequent evolution of NSTX shot 129169. This discharge had a period with a non-monotonic safety factor profile, q (reversed shear), which was terminated by a MHD event that abruptly lowered the central safety factor, q0, and greatly reduced the peakedness of the pressure profile. We show that the equilibrium just before the MHD event occurred was linearly unstable to many pressure-driven infernal modes. Modes with toroidal mode number n≥3 all had rational surfaces very close to the minimum value of q. However, a non-resonant pressure-driven (1, 1) mode was also present, and this dominated the nonlinear evolution. The final state in the simulation, after the MHD activity subsided, had a reduced and flattened pressure profile and a nearly monotonic q-profile, in qualitative agreement with experimental results. The initial state was also unstable to the resistive interchange criteria in the reversed-shear region, but the final state was stable everywhere. The “double tearing mode” (DTM) does not appear to play a role in the MHD activity of this discharge. In Appendix A, we show that in a torus, the DTM is strongly stabilized by pressure, but it is destabilized in cylindrical geometry (which has been the most extensively analyzed in the literature).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Beryllium–tungsten graded density inner shells in double shell capsules for improved hydrodynamic stability

The outer surface of the high-Z inner shell in the double shell configuration of inertial confinement fusion experiments experiences Rayleigh–Taylor instability growth during the implosion process due to inverted density and pressure gradients between a highly compressed foam interstitial layer and the accelerating dense inner shell. Graded density layers have long been known to reduce instability growth rates. In this study, we employ high-fidelity radiation hydrodynamic simulations to demonstrate this improved stability when grading beryllium into tungsten. We first characterize the response to L-band preheat of these layers using a newly calibrated radiation drive. While graded layer capsules suffer reduced performance (here, measured as DD neutron yield from a CD foam fuel) in 1D simulations due to reduced kinetic energy coupling and reduced fuel compression, they suffer less of a performance drop when 2D instabilities are accounted for. With the improved stability of graded layers, we explore the performance of capsules with larger fuel radii and thinner shells as a preliminary study to find new designs in which graded layers produce the highest yields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Early internal detection of magnetic tearing and implications for tokamak magnetohydrodynamic stability

Internal fluctuation measurements with Faraday-effect polarimetry in the DIII-D tokamak reveal the onset of a tearing mode with toroidal mode number n = 3 well before it is detected by the sensing coils external to the plasma. This mode appears before the n = 2, 1 modes and is first detected with internal measurements at a lower value of the ideal-wall kink beta limit than is indicated at the time of first detection by the sensing coils. When the mode is first detected, the linear resistive stability parameter, Δ′, indicates marginal stability and continues to do so until later when the mode amplitude begins increasing linearly with time—together suggesting a neoclassical origin for this mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Kelvin–Helmholtz instability under stabilizing parallel magnetic field in nonhomogeneous compressible MHD flows

We study the Kelvin–Helmholtz instability (KHI) for the general case of a compressible, nonhomogeneous, magnetized plasma flow. The study is limited to a vortex sheet interface with an imposed parallel magnetic field. We introduce a new formalism based on a convective Mach number M c , a convective Alfvénic Mach number M Ac , and a total convective Mach number that combines the two. We derive an analytic expression of the KHI growth rate for a homogeneous flow (i.e., zero Atwood number, A=0) that converges toward both the expression for unmagnetized compressible flow and Chandrasekhar's expression for magnetized incompressible flow. Otherwise, the dispersion relation is solved numerically and allows deriving general stability diagrams of magnetized KHI for the triplet (A, M c , β −plasma) parameters. We show these parameters uniquely define all configurations for a parallel magnetic field. We also construct diagrams with respect to the convective Alfvénic Mach number, the β − plasma parameter, or the magnetic field showing which magnetic field strength is required for stabilizing a given shear flow. The theoretical growth rates are compared with 18 simulations made with the GAMERA code, currently used for 3D magnetospheric simulations. Finally, we apply our results to the analysis of a past KHI experiment performed at the OMEGA laser facility, showing linear theory succeeds to provide accurate estimates of the growth rate at early times. We further discuss how our results can inform future experiments in the high-Mach magnetized regime at the National Ignition Facility. Possible limitations of the study due to resistive, mixing, or turbulence effects are discussed.

compressible flows↗
DOE OSTI2025

Laser beam pointing stabilization using analog position-sensitive diodes

Laser wire scanners have been used for ion beam profile and emittance measurements at the Spallation Neutron Source linear accelerator. Due to propagation distances exceeding 100 m, reliable measurements require laser beam stabilization, previously accomplished with a feedback control loop using a digital camera as a position sensor [Hardin et al., Opt. Express 19, 2874 (2011)]. Here, this paper presents an upgraded pointing stabilization system utilizing analog position-sensitive diodes (PSDs) as the position detector, optimized with an optical diffuser. The new system significantly surpasses the previous system by offering an order-of-magnitude improvement in radiation tolerance and a bandwidth limited only by the burst repetition rate of the laser beam. Operating with a 60-Hz burst mode laser, the new system effectively suppresses laser beam drifts up to 30 Hz, compared to the previous system’s 4 Hz limit. In addition, the amplitude of spectral components below 0.1 Hz was reduced by a factor of more than 100, which is over seven times greater than was achieved by the previous system.

Data acquisition↗
DOE OSTI2025

Analysis of the impact of parallel magnetic fluctuations on linear gyrokinetic stability in NSTX-U and verification of gyro-fluid models

In this work, we use the CGYRO gyrokinetic code to analyze two L- and one H-mode discharges from the National Spherical Torus Experiment (NSTX) and NSTX-Upgrade (NSTX-U) selected due to their different mix of ion-scale driftwaves, ion temperature gradient (ITG) mode and trapped electron mode (TEM), and electromagnetic instabilities, kinetic ballooning mode (KBM), and micro-tearing mode (MTM) in the plasma core. It is found that the effect of parallel magnetic fluctuations is strongly destabilizing to the unstable KBMs compared to calculations with only perpendicular magnetic fluctuations. Two discharges have a mix of ITG/TEM and MTMs that are predicted to be dominant instability across the plasma radius. The parallel magnetic fluctuations are found to have little effect on the MTM stability but are destabilizing to ITG/TEM modes. To test the validity of the gyro-fluid linear stability codes TGLF and GFS at low aspect ratio, a database of linear growth rates has been created using the CGYRO gyrokinetic code. The database is comprised of various parameter scans around a standardized set of NSTX-U core parameters. It contains a group of electrostatic cases and an electromagnetic group that includes the effects of perpendicular and parallel magnetic fluctuations. Comparing the results from the GFS and TGLF models, we find that GFS exhibits the best agreement with the database of CGYRO linear growth rates. Comparing the model results for the electromagnetic scans shows that GFS captures the effects of parallel magnetic fluctuations accurately, while the TGLF model does not, as it lacks sufficient perpendicular energy resolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Epitaxial stabilization and oxygen vacancy control of EuNiO 3 thin films

Rare-earth nickelates exhibit valuable behavior for neuromorphic computing at low temperature: Building blocks for biologically inspired microelectronic neurons like electrically driven insulator–metal transitions (IMTs), negative differential resistance, and self-oscillations have been shown up to 230 K for SmNiO 3 and NdNiO 3 . EuNiO 3 raises the IMT far above room temperature (460 K) but high-quality thin films are challenging to synthesize. Here, we explore the epitaxial stabilization of EuNiO 3 using pulsed laser deposition. X-ray diffraction reciprocal space maps, x-ray absorption spectroscopy, and transmission electron microscopy show that higher growth temperature (800 °C) reduces oxygen vacancy concentrations in EuNiO 3 . Pseudomorphic EuNiO 3 is demonstrated on both SrLaAlO 4 and NdGaO 3 substrates, and LaNiO 3 buffer layers are incorporated to facilitate future vertical device fabrication. In contrast to bulk thermodynamic predictions, the greater oxidation and crystallinity at higher temperature we observe indicates that epitaxial substrates can stabilize EuNiO 3 at O 2 pressures less than 1 atm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Optimization and active stabilization of a far-infrared laser for NSTX-U high poloidal wavenumber scattering diagnostics

The far-infrared (FIR) laser output beam power and profile are important parameters in the laser-aided diagnostics, directly influencing the spatial resolution and signal-to-noise ratio of measurements. Here, this work focuses on developing a systematic control method to enhance FIR laser beam quality through optimized mirror alignment and real-time feedback-based precision cavity length tuning. A 150 W CO 2 laser, aligned with the waveguide axis using a HeNe reference laser, serves as the pump source. The sensitivity of FIR beam intensity to pump gas pressure and thermal expansion is investigated, revealing that even a 1 µm cavity expansion can significantly degrade output power stability to about two-thirds of its original value. To address this, a feedback control module has been designed and implemented for active cavity length adjustment, stabilizing the output power at ∼30 mW. In addition, maintaining a high formic acid gas pressure ($>$190 mTorr) within the cavity ensures reliable operation. The optimized FIR laser will be deployed on the National Spherical Torus eXperiment-U high poloidal wavenumber scattering system for studying electron-scale turbulence in tokamak plasmas.

Xu, Xinhang [Univ. of California, Davis, CA (Unite↗
DOE OSTI2026

Avoidance of disruptions on KSTAR due to vertical displacement events via novel real-time stability assessment

Disruption avoidance via the DECAF approach has been achieved on KSTAR using a novel real-time vertical stability assessment and a multiactuator feedback control strategy. The development of disruption avoidance strategies with reactor-relevant reliability is an urgent activity, enabling future fusion power plants. The stability metric employed is based on a new formulation of a vertical force gradient balance metric evaluated across the poloidal cross section of the plasma, with parameters tuned using historical data. Evaluation of this metric on a validation set of 400 recent KSTAR shots indicates >82% of Vertical displacement events can be avoided via feedback control. Essential to its calculation is the two-dimensional toroidal current density distribution in the plasma. Measurement of this profile faster than fully-converged equilibrium reconstructions can deliver is found to improve forecaster performance and is achieved with a surrogate model that takes as input magnetic diagnostic measurements and outputs the current profile on a basis comprising the top principal components of historical current profiles (from past equilibrium reconstructions). This method solves the non-uniqueness problem typically faced when reconstructing current profiles directly from diagnostics, while improving computational time and accuracy. On average, profiles produced by this model reach coefficients of determination of >0.99 with respect to those from equilibrium reconstructions. The avoidance actuators employed include poloidal field coils and an electron cyclotron current drive system. The multiactuator approach, as shown in this first demonstration, allows disruption avoidance while minimizing impact to operational performance. This ability, along with its flexibility and speed, makes this new approach an attractive option for avoiding these types of disruptions in reactors.

Tobin, Matthew [Columbia Univ., New York, NY (Unit↗
DOE OSTI2020

A chemically stabilized sulfur cathode for lean electrolyte lithium sulfur batteries

Lithium sulfur batteries (LSBs) are promising next-generation rechargeable batteries due to the high gravimetric energy, low cost, abundance, nontoxicity, and high sustainability of sulfur. However, the dissolution of high-order polysulfide in electrolytes and low Coulombic efficiency of Li anode require excess electrolytes and Li metal, which significantly reduce the energy density of LSBs. Quasi-solid-state LSBs, where sulfur is encapsulated in the micropores of carbon matrix and sealed by solid electrolyte interphase, can operate under lean electrolyte conditions, but a low sulfur loading in carbon matrix (<40 wt %) and low sulfur unitization (<70%) still limit the energy density in a cell level. Here, we significantly increase the sulfur loading in carbon to 60 wt % and sulfur utilization to ∼87% by dispersing sulfur in an oxygen-rich dense carbon host at a molecular level through strong chemical interactions of C–S and O–S. In an all-fluorinated organic lean electrolyte, the C/S cathode experiences a solid-state lithiation/delithiation reaction after the formation of solid electrolyte interphase in the first deep lithiation, completely avoiding the shuttle reaction. The chemically stabilized C/S composite retains a high reversible capacity of 541 mAh⋅g −1 (based on the total weight of the C/S composite) for 200 cycles under lean electrolyte conditions, corresponding to a high energy density of 974 Wh⋅kg −1 . The superior electrochemical performance of the chemical bonding-stabilized C/S composite renders it a promising cathode material for high-energy and long-cycle-life LSBs.

25 ENERGY STORAGE↗
DOE OSTI2024

Myosin in autoinhibited off state(s), stabilized by mavacamten, can be recruited in response to inotropic interventions

Mavacamten is a FDA-approved small-molecule therapeutic designed to regulate cardiac function at the sarcomere level by selectively but reversibly inhibiting the enzymatic activity of myosin. It shifts myosin toward ordered off states close to the thick filament backbone. It remains elusive whether these myosin heads in the off state(s) can be recruited in response to physiological stimuli when required to boost cardiac output. We show that cardiac myosins stabilized in these off state(s) by mavacamten are recruitable by 1) Ca 2+ , 2) increased chronotropy [heart rate (HR)], 3) stretch, and 4) β-adrenergic (β-AR) stimulation, all known physiological inotropic interventions. At the molecular level, we show that Ca 2+ increases myosin ATPase activity by shifting mavacamten-stabilized myosin heads from the inactive super-relaxed state to the active disordered relaxed state. At the myofilament level, both Ca 2+ and passive lengthening can shift mavacamten-ordered off myosin heads from positions close to the thick filament backbone to disordered on states closer to the thin filaments. In isolated rat cardiomyocytes, increased stimulation rates enhanced shortening fraction in mavacamten-treated cells. This observation was confirmed in vivo in telemetered rats, where left-ventricular dP/dt max , an index of inotropy, increased with HR in mavacamten-treated animals. Finally, we show that β-AR stimulation in vivo increases left-ventricular function and stroke volume in the setting of mavacamten. Our data demonstrate that the mavacamten-promoted off states of myosin in the thick filament are at least partially activable, thus preserving cardiac reserve mechanisms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Can Third-Body Stabilization of Bimolecular Collision Complexes in Cold Molecular Clouds Happen?

For more than half a century, networks of radiative association, dissociative recombination, and bimolecular reactions have been postulated to drive the low-temperature chemistry of cold molecular clouds. Third-body stabilizations of collision complexes have been assumed to be 'irrelevant' due to short lifetime of such complexes. Here, we conduct crossed molecular beam studies of ground state atomic silicon with diacetylene in combination with electronic structure calculations and microcanonical kinetics models operating under cold molecular cloud conditions. Our combined experimental, electronic structure, and microcanonical kinetics modelling investigations provide compelling evidence that three-body collisions of molecular hydrogen with long-lived reaction intermediates accessed through intersystem crossing are prevalent deep inside molecular clouds. This concept might be exportable to reactions involving polycyclic aromatic hydrocarbons thus affording a versatile machinery to complex organics via third-body stabilizations of bimolecular collision complexes deep inside cold molecular clouds.

astrochemistry↗
DOE OSTI2025

Development of a Flow Stabilization Algorithm Enabling Measurement of Low Oxygen Concentrations in Liquid Sodium

To enhance the automated control of the plugging meter (PM) and thereby enhance detection fidelity in ultralow oxygen environments [≤1 parts per million by weight (wppm)], a novel proportional derivative controller has been implemented with conventional PM hardware. This ramp sign stabilized flow (RSSF) controller manipulates the sign (heating or cooling direction) at a fixed rate, enabling precise temperature adjustment around the saturation temperature of the bulk sodium. This adjustment helps maintain flow stability in a partially formed sodium oxide plug, thus greatly reducing the temperature amplitude in the plugging cycle and promoting simple and accurate oxygen determinations in addition to an increased sampling rate. Rather than relying on the subjective nature of indexing the time when the flow rate changes due to the plugging or unplugging onset to the PM temperature, a running average of the correlated oxygen concentration with time over multiple plugging events can provide oxygen readings ranging from an absolute uncertainty of 500 wppb in real time to less than 50 wppb for a 24-h sampling window. Finally, the RSSF controller was tested at 508 ± 7 wppb with measured oxygen of 542 ± 179 wppb, further reducing the variance between the saturation temperature and the plugging temperature.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗