Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solubility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Theory of Influence of a Low-Volatility, Soluble Impurity on Spherically-Symmetric Combustion of Fuel Droplets

Analyses are given for the evolution of liquid-phase mass fraction profiles and temperature during combustion of fuel droplets composed of binary miscible mixtures of low-volatility and high-volatility constituents, with small initial mass fractions of the low-volatility material, or slow introduction of low-volatility material into the liquid phase by absorption from the gas phase. The gas phase is assumed to remain quasi-steady and the liquid temperature spatially uniform. The ratio of the liquid-phase diffusion coefficient to the initial burning-rate constant is treated as a small parameter. Asymptotic analyses in this parameter are developed, and the conservation equations are integrated numerically in obtaining descriptions of the combustion history. It is shown that at the surface of the droplet a boundary layer arises in which the mass fraction of the low-volatility component increases with time. The results are used to explain qualitatively some observed conditions of flame contraction and liquid disruption in droplet combustion.

Shaw, B. D.↗

Linear-sweep voltammetry of a soluble redox couple in a cylindrical electrode

An approach is described for using the linear sweep voltammetry (LSV) technique to study the kinetics of flooded porous electrodes by assuming a porous electrode as a collection of identical noninterconnected cylindrical pores that are filled with electrolyte. This assumption makes possible to study the behavior of this ideal electrode as that of a single pore. Alternatively, for an electrode of a given pore-size distribution, it is possible to predict the performance of different pore sizes and then combine the performance values.

Weidner, John W.↗

AVIRIS calibration and application in coastal oceanic environments - Tracers of soluble and particulate constituents of the Tampa Bay coastal plume

AVIRIS is a testbed for future spacecraft sensors (such as HIRIS and MODIS) planned for the Earth Observing System. Model-derived absorption coefficients at 415 nm, a(415), and back-scattering coefficients at 671 nm, b sub b (671) for Tampa Bay waters were used to create images from AVIRIS data of the dissolved component of a(415) due to gelbstoff, a sub g (415), and salinity. Images of a sub g (415), salinity, and b sub b (671) were used to depict the distribution of dissolved and particulate constituents, respectively, for Tampa Bay plume during late, ebb-tidal conditions. Salinity covaried with a sub g (415), which provided a means of mapping salinity from the a sub g (415) imagery. The concentration of suspended particles, as inferred from b sub g (671), was extremely variable in the shallow regions where waves and currents interacted. Pollutants covarying with fresh water or suspended sediments can be mapped from a sub g (415) and b sub b (671) images, respectively.

Carder, K. L.↗

Graphite solubility and co-vesiculation in basalt-like melts at one-ATM

The identity and source of the vapor phase that caused lunar lava-fountaining and vesiculation in lunar basalts continues to be of interest because of its implications for the composition and state of the lunar interior and because of its implications for lunar resources. In light of the apparent near-absence of H2O on the Moon, it has been suggested that the vapor phase may be CO2-CO. This premise is supported by the presence of carbon on the surface of volcanic glass beads. However, although the rapid exsolution of CO2 from a melt during decompression may be consistent with firefountaining, it fails to provide a satisfying explanation for vesiculation in mare basalt where exsolution of the gas phase would more reasonably be related to cooling/crystallization at low pressure rather than decompression from high pressure. Also, geochemical trends in lunar volcanic glasses suggest that their source has an oxygen fugacity more reducing than the iron-wustite buffer, an oxygen fugacity that is inconsistent with presence of dissolved CO2-CO at depth. The results of experiments in which a vesicular 'basalt' is produced from a melt equilibrated with graphite and pure CO gas at one atmosphere pressure are reported. The vesiculation is apparently related to exsolution of CO or a CO species during cooling of the melt or growth of quench crystals. Additionally, particulate carbon dispersed through the quenched sample suggests that elemental carbon is either in solution in the melt prior to quenching or tends to go into suspension perhaps as colloid-like particles. These two observations may provide insight into the nature of fire-fountaining and vesiculation on the Moon.

Colson, R. O.↗

Solubilities of carbon dioxide and water in rhyolitic melt at 850 C and 750 bars

Concentrations of carbon dioxide and water dissolved in glasses quenched from rhyolitic melts equilibrated with H2O-CO2 fluids at 850 C and 750 bar were measured using IR spectroscopy; concentrations of H2O and CO2 in the quenched fluids were measured manometrically. The mole fraction of CO2 in the quenched fluid ranged from 0.06 to 0.91. Concentrations of CO2 in the coexisting rhyolitic melt increased from 23(+/-6) ppm for the sample equilibrated with the most CO2-poor fluid to 515(+/-16) ppm for that equilibrated with the most CO2-rich fluid. The water content of the melt varied from 0.51(+/-0.06) to 3.34(+/-0.08) wt pct. Our results show that concentrations of molecular CO2 and H2O in the glasses obey Henry's Law; the mole fractions of molecular CO2 and molecular H2O in the quenched melts are proportional to their fugacities in the coexisting vapor. CO2 contents of vapor-saturated melts are not enhanced by addition of water to CO2-rich vapor, contrary to previous reports for silicate melts at higher pressures. The Henrian behavior of CO2 and H2O at low pressure considerably simplifies modeling of the degassing of silicic magmas.

Blank, J. G.↗

Aggregation-Enhanced Raman Scattering by a Water-Soluble Porphyrin

Much interest in our laboratory has focused on aggregation of organic compounds, particularly cyanine dyes and porphyrins. For this discussion we have applied absorption and Raman scattering spectroscopies to characterize aggregated TSPP (tetrakis-(p-sulfonatophynyl) porphyrin) in aqueous solution. Based on concentration, pH and ionic strength dependence of TSPP absorption, we deduce that aggregation evolves through the formation of TSPP diacid and that the diacid is the repeating unit in the aggregate. The Raman bands of TSPP in strongly acidic solution lead us further to conclude that vibrations of adjacent molecules are perturbed in a fashion that is consistent with the pyrrolic ring in the porphinato macrocycle being ruffled, and that two aggregate arrangements occur: specifically J- and H-type aggregates. Furthermore, aggregation enhancement is advanced as a viable mechanism to explain enhanced Raman Scattering for homogeneous aqueous phase TSPP, where the surface-enhancement mechanism is not applicable.

Akins, Daniel L.↗

Thermodynamics, Solubility, and Diffusivity of Oxygen in Titanium and Ti-Al Alloys

Titanium aluminides and titanium aluminide-based composites are attractive candidate materials for high-temperature structural applications. As these materials may be exposed to oxidizing environments durine their use at elevated temperatures, it is essential that they possess a good oxidation resistance. Previous studies have shown that the oxidation resistance of Al-rich alloys in the Ti-Al system is superior to that of the Ti-rich alloys. The scales formed on the surface of the Al-rich and Ti-rich alloys have been reported to be predominantly Al2O3 and TiO2, respectively. Since the relative stabilities of the oxides of Al and Ti at various temperatures and oxygen pressures can be assessed from their thermodynamic data, it is possible, With the help of thermodynamic calculations, to determine the compositions of the alloys which would form scales of Al2O3, TiO(x) or a ternary oxide such as TiAl2O5 during oxidation at a given temperature. The thermodynamic calculations require reliable activity data for the Ti-Al system. These data have not been determined for the entire composition and temperature range of interest. Using the data available in the literature, recently performed thermodynamic calculations and concluded that the stable oxide changed from TiO to Al2O3 in the existence region of the tial phase. In the case of titanium aluminide-based composites, another major concern is the mutual chemical compatibility of the matrix material with the reinforcement phase. Fibers of SiC, TiB2 and Al2O3 are currently being investigated for reinforcement of titanium aluminide matrices.

Mehrotra, Gopal M.↗

Calcium Solubility and Cation Exchange Properties in Zeoponic Soil

An important aspect of a regenerative life support system at a Lunar or Martian outpost is the ability to produce food. Essential plant nutrients, as well as a solid support substrate, can be provided by: (1) treated Lunar or Martian regolith; (2) a synthetic soil or (3) some combination of both. A synthetic soil composed of ammonium- and potassium-saturated chinoptlolite (a zeolite mineral) and apatite, can provide slow-release fertilization of plants via dissolution and ion-exchange reactions. Previous equilibrium studies (Beiersdorfer, 1997) on mixtures of synthetic hydroxyapatite and saturated-clinoptilolite indicate that the concentrations of macro-nutrients such as ammonium, phosphorous, potassium, magnesium, and calcium are a function of the ratio of chinoptilolite to apatite in the sample and to the ratio of potassium to ammonium on the exchange sites in the clinoptilolite. Potassium, ammonium, phosphorous, and magnesium are available to plants at sufficient levels. However, calcium is deficient, due to the high degree of calcium adsorption by the clinoptilolite. Based on a series of batch-equilibration experiments, this calcium deficiency can be reduced by (1) treating the clinoptilolite with CaNO3 or (2) adding a second Ca-bearing mineral (calcite, dolomite or wollastonite) to the soil. Treating the Cp with CaNO3 results in increased Ca in solution, decreased P in solution and decreased NH4 in solution. Concentrations of K were not effected by the CaNO3 treatment. Additions of Cal, Dol and Wol changed the concentrations of Ca and P in solution in a systematic fashion. Cal has the greatest effect, Dol the least and Wol is intermediate. The changes are consistent with changes expected for a common ion effect with Ca. Higher concentrations of Ca in solution with added Cal, Dol or Wol do not result in changes in K or NH4 concentrations.

Beiersdorfer, Raymond E.↗

Osmium Solubility in Silicate Melts: New Efforts and New Results

In a recent paper, Borisov and Palme reported the first experimental results on the partitioning of Os between metal (Ni-rich OsNi alloys) and silicate melt of anorthite-diopside eutectic composition at 1400 C and 1 atm total pressure and and at function of O2 from 10(exp -8) to 10(exp -12) atm. Experiments were done by equilibrating OsNi metal loops with silicate melt. Metal and glass were analyzed separately by INAA. D(sup 0s) ranged from 10(exp 6) to 10(exp 7), which is inconsistent with core/ mantle equilibrium for HSEs and favors the late veneer hypothesis. Unfortunately, there was practically no function of O2 dependence of Os partitioning, and the scatter of experimental results was quite serious, so the formation of Os nuggets was suspected. This new set of experiments was specifically designed to avoid of at least minimize the nugget problem

Borisov, A.↗

Calcium Solubility In Zeolite Synthetic-Apatite Mixtures

Life support systems at a lunar or martian outpost will require the ability to produce food growing in 1) treated lunar or martian regolith; 2) a synthetic soil, or 3) some combination of both. Zeoponic soil, composed of NH4 (-) and K-exchanged clinoptilolite (Cp) and synthetic apatite (Ap), can provide slow-release fertilization via dissolution and ion-exchange. Equilibrium studies indicate that KNH4, P, and Mg are available to plants at sufficient levels, however, Ca is deficient. Ca availability can be increased by adding a second Ca-bearing mineral: calcite (Cal); dolomite (Dol); or wollastonite (Wol). Additions of Cal, Dol, and Wol systematically change the concentrations of Ca and P in solution. Cal has the greatest effect, Dol the least, and Wol is intermediate.

Beiersdorfer, R.↗

Identification of a small tetraheme cytochrome c and a flavocytochrome c as two of the principal soluble cytochromes c in Shewanella oneidensis strain MR1

Two abundant, low-redox-potential cytochromes c were purified from the facultative anaerobe Shewanella oneidensis strain MR1 grown anaerobically with fumarate. The small cytochrome was completely sequenced, and the genes coding for both proteins were cloned and sequenced. The small cytochrome c contains 91 residues and four heme binding sites. It is most similar to the cytochromes c from Shewanella frigidimarina (formerly Shewanella putrefaciens) NCIMB400 and the unclassified bacterial strain H1R (64 and 55% identity, respectively). The amount of the small tetraheme cytochrome is regulated by anaerobiosis, but not by fumarate. The larger of the two low-potential cytochromes contains tetraheme and flavin domains and is regulated by anaerobiosis and by fumarate and thus most nearly corresponds to the flavocytochrome c-fumarate reductase previously characterized from S. frigidimarina to which it is 59% identical. However, the genetic context of the cytochrome genes is not the same for the two Shewanella species, and they are not located in multicistronic operons. The small cytochrome c and the cytochrome domain of the flavocytochrome c are also homologous, showing 34% identity. Structural comparison shows that the Shewanella tetraheme cytochromes are not related to the Desulfovibrio cytochromes c(3) but define a new folding motif for small multiheme cytochromes c.

Cytochrome c Group/chemistry/genetics/metabolism↗