Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SLOPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

A multi-frequency measurement of thermal microwave emission from soils - The effect of soil texture and surface roughness

An experiment on remote sensing of soil moisture content was conducted over bare fields with microwave radiometers at the frequencies of 1.4 GHz, 5 GHz, and 10.7 GHz during July September of 1981. Three bare fields with different surface roughneses and soil textures were prepared for the experiment. Ground truth acquisition of soil temperatures and moisture contents for 5 layers down to the depth of 15 cm was made concurrently with radiometric measurements. The experimental results show that the effect of surface roughness is to increase the soils' brightness temperature and to reduce the slope of regression between brightness temperature and moisture content. The slopes of regression for soils with different textures are found to be comparable, and the effect of soil texture is reflected in the difference of regression line intercepts at brightness temperature axis. The result is consistent with laboratory measurement of soils' dielectric permittivity. Measurements on wet smooth bare fields give lower brightness temperatures at 5 GHz than at 1.4 GHz. Previously announced in STAR as N82-24550

Wang, J. R.↗

Use of radar image texture in geologic mapping

Large slope angle radar and small slope angle radar techniques are discussed. The techniques are developed to aid in the geologic interpretation of synthetic aperture radar (SAR) images. The application presented is for heavy vegetation and where very little other data can be obtained directly from remote sensing images. To understand the relationships between image texture, topography, lithology, geomorphology, and climate improves, textural information from SAR images are used for the identification of rock types to discriminate units. An active program is to integrate textural information from radar images directly with backscatter data from the same images, and with compositional information derived from visible near infrared sensors such as LANDSAT is explored. The role of quantitative textural information in this type of multisensor analysis which promises to be significant is outlined.

Farr, T. G.↗

Venus: Global radar properties in a geological context

The radar altimetry, roughness (RMS slopes), and reflectivity data acquired for Venus represent the only global radar information available for any of the planets. In addition, the Pioneer Venus radar instrument was able to sound the surface at normal incidence so that it was possible to accurately measure the small-scale surface slopes and reflectivity (dielectric and porosity properties) at the same time as the surface elevation. Analyses of the topography of Venus demonstrate that it differs in its distribution from the Moon, Mars, or the Earth. While the range of topography extends from -2.5 km below the reference level to 11.5 km above, most of Venus falls within 1 km of the mean elevation, this is in sharp contrast to the Earth. The narrow, unimodal nature of the distribution of topography on Venus evidently exerts control on the other radar-derived properties of the surface. When clustering analysis techniques are applied to the Venus radar data sets, the result demonstrates that topographic zones serve as the best criteria for distinguishing regions on Venus which have related radar properties. The individual radar data sets are investigated separately and in conjunction with topography.

Garvin, J. B.↗

X-ray spectra and time variability of active galactic nuclei

The X-ray spectra of broad line active galactic nuclei (AGN) of all types (Seyfert I's, NELG's, broadline radio galaxies) are well fit by a power law in the .5 to 100 keV band of man energy slope alpha = .68 + or - .15. There is, as yet, no strong evidence for time variability of this slope in a given object. The constraints that this places on simple models of the central energy source are discussed. BL Lac objects have quite different X-ray spectral properties and show pronounced X-ray spectral variability. On time scales longer than 12 hours most radio quiet AGN do not show strong, delta I/I .5, variability. The probability of variability of these AGN seems to be inversely related to their luminosity. However characteristics timescales for variability have not been measured for many objects. This general lack of variability may imply that most AGN are well below the Eddington limit. Radio bright AGN tend to be more variable than radio quiet AGN on long, tau approx 6 month, timescales.

Mushotzky, R. F.↗

Martian Crater Size Distributions and Terrain Age

The crater size/frequency distributions of large ( 8 km) craters on the Moon and terrestrial planets display two very different curves representing two crater populations. The heavily cratered regions of the Moon, Mercury, and Mars show the same highly structured curve which cannot be represented by a single slope distribution function. In contrast, the lunar post mare crater population has a size/frequency distribution which differs significantly from that in the highlands over the same diameter range, and can be represented by a single-slope distribution function of -2.8 differential. On areas of martian lightly cratered northern plains, the crater population is essentially identical to that of the post mare population. This indicates that the same two families of impacting objects were responsible for the cratering records on both Moon and Mars. The thickness of mantling material varies among the various plains units, and can be calculated from the depth/diameter scaling relations for martian craters.

Nadine G Barlow↗

Cratering history of the Saturnian satellites

In an attempt to relate the observed crater frequencies on the saturnian satellites with absolute time, the cratering history of the Saturn system was modeled. The model is based upon several assumptions. First, the cumulative flux history at Saturn resembles that of the inner solar system. That is to say, a high cratering rate which rapidly (exponentially) decayed over the first few hundred million years followed by a significatly lower but more constant flux to the present. Second, the end of the heavy bombardment occured about 3.7-3.8 b.y. ago. Third, Population I craters, dominated by large diameters and having a shallow size-frequency distribution slope, were formed during the period of heavy bombardment. Population II craters, characterized by small craters and a steep distribution slope, have formed since the heavy bombardment ended.

Plescia, J. B.↗

Geology

Three objectives were outlined: (1) global distribution, geometry and composition of continental rock units; (2) morphology and structure of the continental crust; and (3) monitoring selected surface processes. Mapping soil, sediment and rock characteristics for land surfaces requires the use of visible, reflected, thermal and radio parts of the spectrum. Digital topographic data (elevation, slope angle, slope magnitude) are needed to correct reflectance, emission, and radar data. In addition, images of the topographic data provide fundamental information on the morphology and structure of the land.

Arvidson, R.↗

A study on the spectral models for waves in finite water depth

From an extension of the Wallops Spectrum (Huang et al., 1981) for the deep water waves, spectral models for waves in finite water depths are developed. Stokes wave expansions are found to offer a good approximation for intermediate water depth. The spectral function in this case is controlled by three parameters: the significant slope, the nondimensional depth, and the peak frequency. It is pointed out that solitary and cnoidal wave models must be used for the shallow water waves. The controlling parameters now reduce to the Urell number and the peak frequency. Even though the resulting spectral models place special emphasis on the energy-containing range of the spectrum, they are not limited to this range and they are not limited to any particular sea state. They are seen as offering a possible explanation of the variations in the special slope observed by previous investigators.

Huang, N. E.↗

Measurement of high frequency waves using a wave follower

High frequency waves were measured using a laser-optical sensor mounted on a wave follower. Measured down-wind wave slope spectra are shown to be wind speed dependent; the mean square wave-slopes are generally larger than those measured by Cox and Munk (1954) using the sun glitter method.

Tang, S.↗

Monte Carlo simulation of the effect of soil moisture variation on the microwave emission from soils

In this paper, results of a Monte Carlo simulation of the effect of noise on the relationship between the microwave emissivity of soil and its moisture content are presented. It is found that whenever the magnitude of the noise for the independent variable, in this case the soil moisture, is increased, both the slope of the regression and the correlation coefficient decrease. In particular, when the noise has magnitude equivalent to a coefficient of variation of 0.25, the slope and correlation coefficient are in good agreement with those obtained from the data of a 21-cm airborne microwave radiometer which was flown over a test site in hand county, South Dakota. The comparison was made using a linear relationship to determine the estimated emissivity from the ground measurements of soil moisture. The linear relationship was derived from a radiative transfer model calculation of the microwave emissivities using realistic soil-moisture profiles. The effect of surface roughness was included in the relationship, and the variability of the surface roughness was also simulated by a Monte Carlo technique.

Mo, T.↗

Bidirectional reflectance spectroscopy. III - Correction for macroscopic roughness

A mathematically rigorous formalism is derived by which an arbitrary photometric function for the bidirectional reflectance of a smooth surface may be corrected to include effects of general macroscopic roughness. The correction involves only one arbitrary parameter, the mean slope angle, and is applicable to surfaces of any albedo. Using physically reasonable assumptions and mathematical approximations, the correction expressions are evaluated analytically to second order in the mean slope angle. The correction is applied to the bidirectional-reflectance function of Hapke (1981). Expressions for both the differential and integral brightnesses are obtained. Photometric profiles on hypothetical smooth and rough planets of low and high albedo are shown to illustrate the effects of macroscopic roughness. The theory is applied to observations of Mercury and predicts the integral phase function, the apparent polar darkening, and the lack of limb brightness surge on the planet. The roughness-corrected bidirectional-reflectance function is sufficiently simple that it can be conveniently evaluated on a programmable hand-held calculator.

Hapke, B.↗

Relationship between forest clearing and biophysical factors in tropical environments: Implications for the design of a forest change monitoring approach

The relationship between forest clearing, biophysical factors (e.g, ecological zones, slope gradient, soils), and transportation network in Costa Rica was analyzed. The location of forested areas at four reference datas (1940, 1950, 1961, and 1977) as derived from aerial photography and LANDSAT MSS data was digitilized and entered into a geographically-referenced data base. Ecological zones as protrayed by the Holdridge Life Zone Ecology System, and the location of roads and railways were also digitized from maps of the entire country as input to the data base. Information on slope gradient and soils was digitized from maps of a 21,000 square kilometer area. The total area of forest cleared over four decades are related to biophysical factors was analyzed within the data base and deforestation rates and trends were tabulated. The relatiohship between forest clearing and ecological zone and the influence of topography, sils, and transportation network are presented and discussed.

Sader, S. A.↗

IRAS observations of active galaxies

The IRAS survey gives an unbiased view of the infrared properties of the active galaxies. Seyfert galaxies occupy much the same area in color-color plots as to normal infrared bright galaxies, but extend the range towards flatter 60 to 25 mm slopes. Statistically the Seyfert 1 galaxies can be distinguished from the Seyfert 2 galaxies, lying predominantly closer to the area with constant slopes between 25 and 200 mm. The infrared measurements of the Seyfert galaxies cannot distinguish between the emission mechanisms in these objects although they agree with the currently popular ideas; they do provide a measure of the total luminosity of the Seyferts. The quasar's position in the color-color diagrams continue the trend of the Seyferts. The quasar 3C48 is shown to be exceptional among the radio loud quasars in that it has a high infrared luminosity which dominates the power output of the quasar and is most likely associated with the underlying host galaxy.

Neugebauer, G.↗

Sulfur and carbon cycling in organic-rich marine sediments

Nearshore, continental shelf, and slope sediments are important sites of microbially mediated carbon and sulfur cycling. Marine geochemists investigated the rates and mechanisms of cycling processes in these environments by chemical distribution studies, in situ rate measurements, and steady state kinetic modeling. Pore water chemical distributions, sulfate reduction rates, and sediment water chemical fluxes were used to describe cycling on a ten year time scale in a small, rapidly depositing coastal basin, Cape Lookout Bight, and at general sites on the upper continental slope off North Carolina, U.S.A. In combination with 210 Pb sediment accumulation rates, these data were used to establish quantitative carbon and sulfur budgets as well as the relative importance of sulfate reduction and methanogeneis as the last steps in the degradation of organic matter.

Martens, C. S.↗

Measurement and correlation of jet fuel viscosities at low temperatures

Apparatus and procedures were developed to measure jet fuel viscosity for eight current and future jet fuels at temperatures from ambient to near -60 C by shear viscometry. Viscosity data showed good reproducibility even at temperatures a few degrees below the measured freezing point. The viscosity-temperature relationship could be correlated by two linear segments when plotted as a standard log-log type representation (ASTM D 341). At high temperatures, the viscosity-temperature slope is low. At low temperatures, where wax precipitation is significant, the slope is higher. The breakpoint between temperature regions is the filter flow temperature, a fuel characteristic approximated by the freezing point. A generalization of the representation for the eight experimental fuels provided a predictive correlation for low-temperature viscosity, considered sufficiently accurate for many design or performance calculations.

Schruben, D. L.↗

Hadronic components of EAS by rigorous saddle point method in the energy range between 10(5) and 10(8) GeV

The study of hadronic components in the high energy range between 10 to the 5 and 10 to the 8 Gev exhibits by far the strongest mass sensitivity since the primary energy spectrum as discussed by Linsley and measured by many air shower experimental groups indicates a change of slope from -1.7 to 2.0 in this energy range. This change of slope may be due to several reasons such as a genuine spectral feature of astrophysical origin, a confinement effect of galactic component or a rather rapid change of mass, a problem which we have attempted to study here in detail.

Sinha, M.↗

Results of investigation of muon fluxes of superhigh energy cosmic rays with X-ray emulsion chambers

The overall data from the investigation of the cosmic ray muon flux in the range of zenith angles (0-90) deg within the energy range (3.5 to 5.0) TeV is presented. The exposure of large X-ray emulsion chambers underground was 1200 tons. year. The data were processe using the method which was applied in the experiment Pamir and differred from the earlier applied one. The obtained value of a slope power index of the differential energy spectrum of the global muon flux is =3.7 that corresponds to the slope of the pion generation differential spectrum, gamma sub PI = 2.75 + or - .04. The analysis of the muon zenith-angular distribution showed that the contribution of rapid generation muons in the total muon flux agree the best with the value .2% and less with .7% at a 90% reliability level.

Ivanenko, I. P.↗

Residual stress characterization with an ultrasonic/magnetic technique

A potentially useful new technique for residual stress characterization in ferromagnetic material is described. The unique feature of this technique is the measurement of small changes in ultrasonic wave velocity by the application of external dc magnetic field in the material under various stress conditions. It was found, in steel, that the fractional change in the natural velocity Delta W/W of waves propagating along the external field direction is affected by the uniaxial stress applied in the same axis. External compression lowers the slope of the Delta W/W curve in the low field region, while external tension generally does the opposite. For most cases, the slope in this region falls below zero under external compression. The result of measurements in specimens with residual stress shows exactly the same tendency.

Namkung, M.↗