Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Structure and Properties of Gallium-Oxide Films Produced by High-Frequency Magnetron-Assisted Deposition

The properties of gallium-oxide films produced by the radio-frequency magnetron-assisted sputtering of a β-Ga{sub 2}O{sub 3} target with deposition onto sapphire substrates are studied. The as-deposited gallium-oxide films are polycrystalline and contain crystallites of the α and β phases. Exposure to oxygen plasma does not bring about the appearance of new crystallites but makes crystallites several times larger in average dimensions in the substrate plane. After annealing at 900°C, the crystallite size becomes twice as large as that in the unannealed film. The films not subjected to thermal annealing exhibit a high resistance at 20°C. In the range of 50–500°C, the conductivity of the samples (G) only slightly depends on temperature (T) and, as T is elevated further, exponentially increases with the activation energy 0.7–1.0 eV. After annealing of the films in argon at 900°C (30 min), the conductivity G starts to sharply increase at T ≈ 350°C. In the dependence of lnG on T {sup –1}, a maximum in the range of 470–520°C and a portion of decreasing conductivity at higher temperatures are observed. The unusual temperature dependence of the conductivity after annealing is attributed to a change in the structure and phase composition of polycrystalline gallium-oxide films and, possibly, to some effects at the surface. The structures produced on insulating substrates are solar blind in the visible wavelength region and sensitive to radiation in the ultraviolet region (222 nm).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Emission Properties of Heavily Doped Epitaxial Indium-Nitride Layers

The results of studies of the spontaneous photoluminescence and stimulated emission spectra of epitaxial n-InN layers with a concentration of free electrons of ~10{sup 19} cm{sup –3} are reported. The layers are grown by molecular-beam epitaxy with the plasma activation of nitrogen on sapphire substrates with AlN and GaN buffer layers. It is found that, as the InN layers are grown under conditions with enrichment with nitrogen at a growth temperature elevated to 470°C close to the beginning of the decomposition of InN, the crystal quality of the layers is improved and the stimulated-emission threshold is lowered. As the conditions of growth change to conditions with enrichment with the metal, two emission bands separated by an energy of 100 meV are observed in the spontaneous-photoluminescence spectra of InN. For such layers, a substantial increase in the stimulated-emission threshold and, in some cases, the lack of a transition to stimulated emission are observed. In the study, an interpretation of the observed emission bands is given and some inferences as to their nature are made.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of bulk gallium nitride single crystals grown by chloride–hydride vapor-phase epitaxy

A gallium nitride crystal 5 mm in thickness was grown by chloride–hydride vapor-phase epitaxy on a sapphire substrate, from which the crystal separated during cooling. At an early stage, a three-dimensional growth mode was implemented, followed by a switch to a two-dimensional mode. Spectra of exciton reflection, exciton luminescence, and Raman scattering are studied in several regions characteristic of the sample. Analysis of these spectra and comparison with previously obtained data for thin epitaxial GaN layers with a wide range of silicon doping enabled conclusions about the quality of the crystal lattice in these characteristic regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Study of the Isolation Region of Planar Superconducting YBCO Structures Formed by the Master Mask Method

Abstract—The development of a new “master mask” method for the manufacture of planar structures based on a high-temperature YBCO superconductor is considered. The method involves the creation of a mask on the blank substrate and, upon deposition of YBCO, the superconducting elements are formed in preset local windows of the mask with isolation regions formed between them. Such growth conditions allow the fabrication of micron-size superconducting elements with excellent electrophysical parameters and a smooth su-rface. The influence of the parameters of the master mask of amorphous cerium oxide on the isolating properties of the resulting isolation regions during the fabrication of planar structures on sapphire and cubic zirconia substrates with epitaxial cerium oxide sublayers has been studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charging of Ion-Implanted Dielectrics by Electron Irradiation

The charging kinetics of Al{sub 2}O{sub 3} (sapphire) and SiO{sub 2} (α-quartz) dielectrics irradiated by inert gas ions (Ar{sup +}), metal ions (Ga{sup +}), and protons (H{sup +}) has been studied. It has been found that charging kinetics depends considerably on the type of irradiating ion. Also, it has been established that preirradiation of a dielectric target by an ionizing corpuscular radiation (protons, ions) substantially changes the charge characteristics of the dielectric surface. These differences depend on irradiating ion energy, which governs the depth of an accumulated negative charge layer versus the depth of ion preimplantation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spontaneous Formation of Indium Clusters in InN Epilayers Grown by Molecular-Beam Epitaxy

We have studied the influence of growth conditions on the number of metallic indium clusters formed spontaneously in indium nitride (InN) layers grown by nitrogen plasma-assisted molecular-beam epitaxy (PAMBE). InN epilayers of N-and In-polarity were grown on c-sapphire substrates and GaN and AlN templates, respectively. N-polar layers were obtained in the standard PAMBE regime, while In-polar layers were grown using a three-stage regime including the stages of epitaxy with enhanced atomic migration and interruption of growth under nitrogen flow. A series of samples were prepared at various growth temperatures and relative In/N flow rates. Measurement of the magnetic-field dependences of the Hall-effect coefficient and its model approximation were used to determine the percentage content of In clusters in various InN layers and the minimum amount of such inclusions that can be achieved by varying the conditions of MBE growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of the Method by Which a High-Resistivity GaN Buffer Layer Is Formed on Properties of InAlN/GaN and AlGaN/GaN Heterostructures with 2D Electron Gas

AlGaN/AlN/GaN and InAlN/AlN/GaN structures with 2D electron gas have been grown on sapphire substrates by metal-organic vapor-phase epitaxy. The suppression of the parasitic conductivity of buffer GaN layers was provided either by intentionally raising the density of edge dislocations or by doping with iron (GaN:Fe). It was shown that using GaN buffer layers with a better crystal perfection and more planar surface results in the electron mobility in the 2D channel for carriers becoming 1.2–1.5 times higher.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Mechanical Stresses on the Magnetic Properties of NiFe{sub 2}O{sub 4} and CoFe{sub 2}O{sub 4} Films

We have studied the influence of mechanical stresses on the magnetic properties of nickel ferrite (NiFev) and cobalt ferrite (CoFe{sub 2}O{sub 4}) films deposited on sapphire substrates with a- and c-oriented step terrace nanostructures. It is established that compressive stresses favor enhancement of the coercive field in thin ferrite films in the strain direction. Films of magnetically soft nickel ferrite with a room-temperature coercive field of 32.5 mT were obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exchange Spring in a Heterostructure with Pd{sub 0.96}Fe{sub 0.04} Low-Temperature Ferromagnet

The exchange bias of the magnetic hysteresis loop and the exchange-spring effect have been observed in thin-film heterostructures comprising layers of Pd{sub 0.96}Fe{sub 0.04} low-temperature ferromagnet, metallic cobalt, and cobalt monoxide (CoO) grown on single-crystalline sapphire by methods of magnetron sputtering and molecular beam epitaxy in an ultrahigh-vacuum system. It is established that the exchange anisotropy of Pd{sub 0.96}Fe{sub 0.04} layer in Pd{sub 0.96}Fe{sub 0.04}/CoO/Co/Al{sub 2}O{sub 3} thin-film heterostructure is absent and the exchange-spring effect in this system is not manifested. In the case of a Pd{sub 0.96}Fe{sub 0.04}/Co/CoO/Al{sub 2}O{sub 3} structure, it is shown that, according to the results of magnetometric measurements, the inversion of the order of antiferromagnetic and ferromagnetic layers leads to pinning of the magnetic moment of Pd{sub 0.96}Fe{sub 0.04} layer at the interface with cobalt and to realization of the exchange-spring effect. Additional evidence in favor of this interpretation was obtained using the micromagnetic modeling of magnetic hysteresis loops.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrafast thin-film laser-induced breakdown spectroscopy of doped oxides

Single-shot femtosecond laser induced breakdown spectroscopy (LIBS) has been shown to be an effective means of detecting heavy metal dopants in porous thin films. Traditional LIBS analysis of trace dopants in modern painted surfaces or TiO2 films is difficult due to the broad noisy spectra of the titanium constituent and interference due to the substrate material. Femtosecond laser pulses provide excellent ablation of the target material with little damage to the underlying substrate. In this study a Ti:sapphire femtosecond laser pulse operated at 800 and 266 nm wavelengths and an Nd:YAG nanosecond laser operated at 266 nm were used to ablate 0.15-15 {mu}m films of TiO2 doped with varying amounts of MgO. This application shows excellent detection of Mg down to 60 ppm with little interference by the substrate material.

36 MATERIALS SCIENCE↗

Comparative study of femtosecond and nanosecond laser-induced breakdown spectroscopy of depleted uranium

We present spectra of depleted uranium metal from laser plasmas generated by nanosecond Nd:YAG (1064 nm) and femtosecond Ti:sapphire (800 nm) laser pulses. The latter pulses produce short-lived and relatively cool plasmas in comparison to the longer pulses, and the spectra of neutral uranium atoms appear immediately after excitation. Evidence for nonequilibrium excitation with femtosecond pulses is found in the dependence of spectral line intensities on the pulse chirp.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Variation of harmonic spectra in laser-produced plasmas at variable phase of femtosecond laser pulses of different bandwidth

The intensity enhancement of harmonics and change in harmonic profiles have been observed in a few plasma plumes (La, In, Mn) under variable phase modulation of Ti:sapphire laser pulses. It is seen that variation of relative harmonic intensities in the plateau region could be achieved by chirp variation of narrowband ({approx}10 nm bandwidth) radiation. The effect of the self-phase modulation (SPM) of broadband ({approx}20 nm bandwidth) laser radiation on the harmonic emission from nanoparticles, C{sub 60}, and Ag plasma while passing through a glass slab is also studied. The observation of broadband harmonic emission and redshift in harmonic wavelengths for an unchirped laser pulse are explained in terms of SPM. The observation of blueshift of harmonic radiation with both positively and negatively chirped pulses was attributed to the different effects of SPM on the chirped pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fractional frequency instability in the 10{sup -14} range with a thermal beam optical frequency reference

We demonstrate a means of increasing the signal-to-noise ratio in a Ramsey-Borde interferometer with spatially separated oscillatory fields on a thermal atomic beam. The {sup 1}S{sub 0}{r_reversible}{sup 3}P{sub 1} intercombination line in neutral {sup 40}Ca is used as a frequency discriminator, with an extended cavity diode laser at 423 nm probing the ground state population after a Ramsey-Borde sequence of 657 nm light-field interactions with the atoms. Evaluation of the instability of the Ca frequency reference is carried out by comparison with (i) a hydrogen-maser and (ii) a cryogenic sapphire oscillator. In the latter case the Ca reference exhibits a square-root {Lambda} variance of 9.2x10{sup -14} at 1 s and 2.0x10{sup -14} at 64 s. This is an order-of-magnitude improvement for optical beam frequency references, to our knowledge. The shot noise of the readout fluorescence produces a limiting square-root {Lambda} variance of 7x10{sup -14}/{radical}({tau}), highlighting the potential for improvement. This work demonstrates the feasibility of a portable frequency reference in the optical domain with 10{sup -14} range frequency instability.

74 ATOMIC AND MOLECULAR PHYSICS↗

Precise frequency measurements of {sup 127}I{sub 2} lines in the wavelength region 750-780 nm

High precision frequency measurements of {sup 127}I{sub 2} hyperfine transitions in the wavelength range between 750 and 780 nm were performed employing an optical frequency comb. A Ti:sapphire laser is frequency stabilized to a hyperfine component of I{sub 2} using a Doppler-free frequency modulation technique, and an optical frequency comb is used to measure its frequency precisely. Improved absolute frequencies of 27 hyperfine transitions between 750 and 780 nm of the bands (0-12) and (0-13) of B {sup 3}{Pi}{sub 0{sub u{sup +}}}-X {sup 1}{Sigma}{sub g}{sup +} system of I{sub 2} are presented. The relative uncertainty of the measurement is a few times 10{sup -10}, limited by the frequency instability of the iodine-stabilized laser. The frequencies are compared to the predicted frequencies using the model description of [Eur. Phys. J. D 28, 199 (2004)], which yields differences larger than expected. An improved model is developed for the range from 755 to 815 nm for the prediction of lines with an error limit of the absolute frequency less than 0.2 MHz.

74 ATOMIC AND MOLECULAR PHYSICS↗

New materials for high-energy-resolution x-ray optics

The use of crystals other than silicon for x-ray optics is becoming more common for many challenging experiments such as resonant inelastic x-ray scattering and nuclear resonant scattering. As more—and more specialized—spectrometers become available at many synchrotron radiation facilities, interest in pushing the limits of experimental energy resolution has increased. The potentially large improvements in resolution and efficiency that nonsilicon optics offer are beginning to be realized. Furthermore, this article covers the background and state of the art for nonsilicon crystal optics with a focus on a resolution of 10 meV or better, concentrating on compounds that form trigonal crystals, including sapphire, quartz, and lithium niobate, rather than the more conventional cubic materials, including silicon, diamond, and germanium.

36 MATERIALS SCIENCE↗

Efficiency Improvement of Nitride-Based Solid State Light Emitting Materials -- CRADA Final Report

The development of In{sub x}Ga{sub 1-x} N/GaN thin film growth by Molecular Beam Epitaxy has opened a new route towards energy efficient solid-state lighting. Blue and green LED's became available that can be used to match the whole color spectrum of visible light with the potential to match the eye response curve. Moreover, the efficiency of such devices largely exceeds that of incandescent light sources (tungsten filaments) and even competes favorably with lighting by fluorescent lamps. It is, however, also seen in Figure 1 that it is essential to improve on the luminous performance of green LED's in order to mimic the eye response curve. This lack of sufficiently efficient green LED's relates to particularities of the In{sub x}Ga{sub 1-x}N materials system. This ternary alloy system is polar and large strain is generated during a lattice mismatched thin film growth because of the significantly different lattice parameters between GaN and InN and common substrates such as sapphire. Moreover, it is challenging to incorporate indium into GaN at typical growth temperatures because a miscibility gap exists that can be modified by strain effects. As a result a large parameter space needs exploration to optimize the growth of In{sub x}Ga{sub 1-x}N and to date it is unclear what the detailed physical processes are that affect device efficiencies. In particular, an inhomogeneous distribution indium in GaN modifies the device performance in an unpredictable manner. As a result technology is pushed forward on a trial and error basis in particular in Asian countries such as Japan and Korea, which dominate the market and it is desirable to strengthen the competitiveness of the US industry. This CRADA was initiated to help Lumileds Lighting/USA boosting the performance of their green LED's. The tasks address the distribution of the indium atoms in the active area of their blue and green LED's and its relation to internal and external quantum efficiencies. Procedures to measure the indium distribution with near atomic resolution were developed and applied to test samples and devices that were provided by Lumilids. Further, the optical performance of the device materials was probed by photoluminescence, electroluminescence and time resolved optical measurements. Overall, the programs objective is to provide a physical basis for the development of a simulation program that helps making predictions to improve the growth processes such that the device efficiency can be increased to about 20%. Our study addresses all proposed aspects successfully. Carrier localization, lifetime and recombination as well as the strain-induced generation of electric fields were characterized and modeled. Band gap parameters and their relation to the indium distribution were characterized and modeled. Electron microscopy was developed as a unique tool to measure the formation of indium clusters on a nanometer length scale and it was demonstrated that strain induced atom column displacements can reliably be determined in any materials system with a precision that approaches 2 pm. The relation between the local indium composition x and the strain induced lattice constant c(x) in fully strained In{sub x}Ga{sub 1-x}N quantum wells was found to be: c(x) = 0.5185 + {alpha}x with {alpha} = 0.111 nm. It was concluded that the local indium concentration in the final product can be modulated by growth procedures in a predictable manner to favorably affect external quantum efficiencies that approached target values and that internal quantum efficiencies exceeded them.

36 MATERIALS SCIENCE↗

Gratings for Increasing Solid-State Laser Gain and Efficiency

We introduce new concepts for increasing the efficiency of solid state lasers by using gratings deposited on laser slabs or disks. The gratings improve efficiency in two ways: (1) by coupling out of the slab deleterious amplified spontaneous emission (ASE) and (2) by increasing the absorption efficiency of pump light. The gratings also serve as antireflective coatings for the extracting laser beam. To evaluate the potential for such coatings to improve laser performance, we calculated optical properties of a 2500 groove/mm, tantala-silica grating on a 1cm x 4cm x 8cm titanium-doped sapphire slab and performed ray-trace calculations for ASE and pump light. Our calculations show substantial improvements in efficiency due to grating ASE-coupling properties. For example, the gratings reduce pump energy required to produce a 0.6/cm gain coefficient by 9%, 20% and 35% for pump pulse durations of 0.5 {micro}s, 1{micro}s and 3{micro}s, respectively. Gratings also increase 532-nm pump-light absorption efficiency, particularly when the product slab overall absorption is small. For example, when the single-pass absorption is 1 neper, absorption efficiency increases from 66%, without gratings, to 86%, when gratings are used.

42 ENGINEERING↗

Thermal Neutron Scattering Law Benchmark and Validation at NCSU [Slides]

The presentation discusses how the NCSU graphite SDT ORELA experiment is under development as a benchmark. It discusses the testing of various ENDF/B-VII.1 and ENDF/B-VIII.0 graphite libraries that have been performed using the PROTEUS benchmark. The presentation demonstrates that the NSCU Polyethylene ENDF/B-VIII.0 TSL improves agreement with total cross section measurements. The presentation concludes by stating that the NCSU single crystal sapphire TSL library is based on realistic data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗