Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RESIDUES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Round Robin Test of Residual Resistance Ratio of Nb $_3$ Sn Composite Superconductors

A round robin test of residual resistance ratio (RRR) was performed for Nb 3 Sn composite superconductors prepared by internal tin method by six institutes with the international standard test method described in IEC 61788-4. It was found that uncertainty mainly resulted from determination of the cryogenic resistance from the intersection of two straight lines drawn to fit the voltage vs. temperature curve around the resistive transition. As a result, the measurement clarified that RRR can be measured with expanded uncertainty not larger than 5% with the coverage factor 2 by using this test method.

43 PARTICLE ACCELERATORS↗
DOE OSTI2015

THE EFFECTS OF FABRICATION INDUCED RESIDUAL STRESS-STRAIN STATES ON THE IRRADIATION PERFORMANCE OF MONOLITHIC MINI-PLATES

This article evaluates the initial stress-strain state of the monolithic fuel plates and their effects on the overall irradiation performance. The monolithic fuel is a proposed fuel form for high-performance research reactors to achieve higher uranium densities within the core to allow the use of low-enriched uranium fuel. These plate-type fuels consist of a high density low enrichment Uranium-Molybdenum alloy based fuel, a diffusion barrier made of Zirconium, and a cladding made of Aluminum. Because the fabrication of monolithic plates involves multiple stages and the foil material is subjected to various thermo-mechanical processes, a presence of significant stress-strain fields is likely. In addition, the choice of the fabrication process may also cause variations in the foil’s microstructure. There are interests if the overall irradiation performance could be affected by the different initial stress-strain state and the microstructural characteristics. To investigate these concerns, a representative plate was simulated for various initial stress-strain states. First, the co-rolling process for thickness reduction stage of the foil was simulated. For this, a scaled version of the process was evaluated to identify distinct stress profiles on the selected paths. These profiles were then used to define an initial state for the foil before Hot Isostatic Pressing. Additional HIP simulations were also performed to study the cases with stress-free foils prior HIP bonding. The purpose of these simulations was to mimic the stress relief treatment after co-rolling, which aims to remove the residual stresses and minimize the material anisotropy. For the HIP process with initially stress-free foil, several bonding temperatures were considered, including the nominal bonding temperature. The final case considered a plate without initial stresses and strains, assuming a hypothetical case in which the plate would be subjected to a post-fabrication heat treatment to relieve the process-induced stresses before irradiation. Finally, the irradiation processes were simulated for all the cases with distinct pre-irradiation stress-strain profiles. For all cases, the same irradiation parameters were used. The resulting distortions, stress-strain fields and temperature profiles were gathered on selected locations. Finally, a comparative evaluation was made to determine the sensitivity to the pre-irradiation stress-strain variations. The irradiation simulations have revealed that fabrication induced stresses in fuel would be relieved quickly due to large irradiation creep strain. The results indicated that the stress-strain behavior of the fuel foil is not affected significantly by the fabrication process. It is important to note that this excludes microstructural characteristics, which may have important implications on overall behavior. In the cladding however, the stresses continue increase and additional plastic strains are generated. This is due to irradiation hardening by fast neutrons. Additional stresses and strains are formed in the cladding as a result of displacements caused by the volumetric swelling of the fuel foil.

42 ENGINEERING↗
DOE OSTI2025

Metagenome-assembled genomes from microbial communities producing lactic acid from dairy residues

To advance the knowledge of microbial communities capable of fermenting agro-industrial residues into value-added products, we report metagenomes of microbial communities from four anaerobic bioreactors fed a mixture of ultra-filtered milk permeate and cottage cheese acid whey. This analysis produced 42 unique metagenome-assembled genomes (MAGs) that represent distinct taxa.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2015

Blocks and residual stresses in sapphire rods of different crystallographic orientations grown by the Stepanov method

The formation of blocks in shaped sapphire rods of two crystallographic orientations has been investigated. It is shown that, when growth occurs in the direction of the optical c axis, blocks are formed with a higher probability than in the case of growth in the a direction. A model of formation of blocks in rods of different orientations is proposed. The distribution of residual stresses over sapphire rod cross sections is measured by conoscopy. It is found that stresses increase from the middle of a rod to its periphery and reach 20 MPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Layer-Parallel Training of Deep Residual Neural Networks

Residual neural networks (ResNets) are a promising class of deep neural networks that have shown excellent performance for a number of learning tasks, e.g., image classification and recognition. Mathematically, ResNet architectures can be interpreted as forward Euler discretizations of a nonlinear initial value problem whose time-dependent control variables represent the weights of the neural network. Hence, training a ResNet can be cast as an optimal control problem of the associated dynamical system. For similar time-dependent optimal control problems arising in engineering applications, parallel-in-time methods have shown notable improvements in scalability. This paper demonstrates the use of those techniques for efficient and effective training of ResNets. The proposed algorithms replace the classical (sequential) forward and backward propagation through the network layers with a parallel nonlinear multigrid iteration applied to the layer domain. This adds a new dimension of parallelism across layers that is attractive when training very deep networks. From this basic idea, we derive multiple layer-parallel methods. The most efficient version employs a simultaneous optimization approach where updates to the network parameters are based on inexact gradient information in order to speed up the training process. Finally, using numerical examples from supervised classification, we demonstrate that the new approach achieves a training performance similar to that of traditional methods, but enables layer-parallelism and thus provides speedup over layer-serial methods through greater concurrency.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Sensitivity of Emissions to Uncertainties in Residual Gas Fraction Measurements in Automotive Engines: A Numerical Study

Initial conditions of the working fluid (air-fuel mixture) within an engine cylinder, namely, mixture composition and temperature, greatly affect the combustion characteristics and emissions of an engine. In particular, the percentage of residual gas fraction (RGF) in the engine cylinder can significantly alter the temperature and composition of the working fluid as compared with the air-fuel mixture inducted into the engine, thus affecting engine-out emissions. Accurate measurement of the RGF is cumbersome and expensive, thus making it hard to accurately characterize the initial mixture composition and temperature in any given engine cycle. This uncertainty can lead to challenges in accurately interpreting experimental emissions data and in implementing real-time control strategies. Quantifying the effects of the RGF can have important implications for the diagnostics and control of internal combustion engines. This paper reports on the use of a well-validated, two-zone quasi-dimensional model to compute the engine-out NO and CO emission in a gasoline engine. The effect of varying the RGF on the emissions under lean, near-stoichiometric, and rich engine conditions was investigated. Numerical results show that small uncertainties (~2–4%) in the measured/computed values of the RGF can significantly affect the engine-out NO/CO emissions.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2016

Determination of residual stress in a microtextured α titanium component using high-energy synchrotron X-rays

A shrink-fit sample is manufactured with a Ti-8Al-1Mo-1V alloy to introduce a multiaxial residual stress field in the disk of the sample. A set of strain and orientation pole figures are measured at various locations across the disk using synchrotron high-energy X-ray diffraction. Two approaches—the traditional sin 2 Ψ method and the bi-scale optimization method—are taken to determine the stresses in the disk based on the measured strain and orientation pole figures, to explore the range of solutions that are possible for the stress field within the disk. While the stress components computed using the sin 2 Ψ method and the bi-scale optimization method have similar trends, their magnitudes are significantly different. Lastly, it is suspected that the local texture variation in the material is the cause of this discrepancy.

42 ENGINEERING↗
DOE OSTI2020

Hydrogenation of Pyrolysis Oil from Loblolly Pine Residue

Loblolly pine residue prepared with and without zeolite ZSM-5 was pyrolyzed at 60°C and the pyrolysis oil was hydrogenated using formic acid as a hydrogen source, in the presence of a Ru/activated carbon catalyst. As indicated by the pyrolysis yield, addition of the zeolite ZSM-5 increased the yield of light oil but decreased the yield of heavy oil. The pyrolysis oils were analyzed by 13 C, 31 P, 19 F, and heteronuclear single quantum coherence or heteronuclear single quantum correlation nuclear magnetic resonance (HSQC-NMR), demonstrating that the zeolite ZSM-5 can efficiently induce decarboxylation reactions and decrease the content of aliphatic hydroxyl groups in the heavy oil by 57%. After hydrogenation of the pyrolysis oil, the aromatic carbon content decreased by 78%, with a significant increase in the aliphatic carbon content.

hydrogenation↗
DOE OSTI2014

Differential Function of Lip Residues in the Mechanism and Biology of an Anthrax Hemophore

To replicate in mammalian hosts, bacterial pathogens must acquire iron. The majority of iron is coordinated to the protoporphyrin ring of heme, which is further bound to hemoglobin. Pathogenic bacteria utilize secreted hemophores to acquire heme from heme sources such as hemoglobin. Bacillus anthracis, the causative agent of anthrax disease, secretes two hemophores, IsdX1 and IsdX2, to acquire heme from host hemoglobin and enhance bacterial replication in iron-starved environments. Both proteins contain NEAr-iron Transporter (NEAT) domains, a conserved protein module that functions in heme acquisition in Gram-positive pathogens. Here, we report the structure of IsdX1, the first of a Gram-positive hemophore, with and without bound heme. Overall, IsdX1 forms an immunoglobin-like fold that contains, similar to other NEAT proteins, a 3{sub 10}-helix near the heme-binding site. Because the mechanistic function of this helix in NEAT proteins is not yet defined, we focused on the contribution of this region to hemophore and NEAT protein activity, both biochemically and biologically in cultured cells. Site-directed mutagenesis of amino acids in and adjacent to the helix identified residues important for heme and hemoglobin association, with some mutations affecting both properties and other mutations affecting only heme stabilization. IsdX1 with mutations that reduced the ability to associate with hemoglobin and bind heme failed to restore the growth of a hemophore-deficient strain of B. anthracis on hemoglobin as the sole iron source. These data indicate that not only is the 3{sub 10}-helix important for NEAT protein biology, but also that the processes of hemoglobin and heme binding can be both separate as well as coupled, the latter function being necessary for maximal heme-scavenging activity. These studies enhance our understanding of NEAT domain and hemophore function and set the stage for structure-based inhibitor design to block NEAT domain interaction with upstream ligands.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2014

Incremental Slitting Residual Stress Measurements for a Hot Cell

This report describes investigations into applying the incremental slitting (a.k.a. crack compliance) method for measuring residual stress in the environment of a hot cell for future measurements of low enriched uranium (LEU) fuel plates coming out of a reactor. Results are reported for exploratory tests done at Los Alamos National Laboratory (LANL) on depleted uranium to check the most important experimental changes required for hot cell operation as compared to conventional testing. Further discussions detail other issues that need to be considered.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

System Study: Residual Heat Removal 1998–2013

This report presents an unreliability evaluation of the residual heat removal (RHR) system in two modes of operation (low-pressure injection in response to a large loss-of-coolant accident and post-trip shutdown-cooling) at 104 U.S. commercial nuclear power plants. Demand, run hours, and failure data from fiscal year 1998 through 2013 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10-year period while yearly estimates for system unreliability are provided for the entire active period. No statistically significant trends were identified in the RHR results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

System Study: Residual Heat Removal 1998-2020

This report presents an unreliability evaluation of the residual heat removal (RHR) system in two modes of operation (low-pressure injection in response to a large loss-of-coolant accident and in response to post-trip shutdown cooling) at 104 U.S. commercial nuclear reactors. Demand, run hour, and failure data from 1998–2020 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Industry Reporting and Information System (IRIS), formerly the INPO Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10-year period while yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing or decreasing trends were identified in the RHR results.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

High Strength, Encapsulated, Commercially Useful Components and Particles Made from Coal Combustion Residuals

This project has developed and demonstrated two high-volume applications for Coal Combustion Residuals (CCR) with annual usage on the order of billions of pounds. The CCR is encapsulated in a recently developed water-impervious inorganic resin coating to reduce leaching of toxic elements from CCR by more than 80% as a first step. Target commercial applications demonstrated for the encapsulated CCR were as reinforcement for high-strength structural columns composed of CCR embedded in a ceramic matrix and as filler in high-volume plastics such as polypropylene. The encapsulated particles produced columns with properties superior to concrete, and a 30% to 50% improvement in stiffness over current fillers in plastics. CCR from bituminous and lignite coal was evaluated and shown to provide high performance, with the bituminous CCR producing the strongest columns and the lignite-based CCR provided the best performance as coated filler in polypropylene. The two-year project advanced both material systems from a Technology Readiness Level (TRL) of 2 to TRL 4.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

System Study: Residual Heat Removal 1998-2022

This report presents an unreliability evaluation of the residual heat removal (RHR) system in two modes of operation (low-pressure injection in response to a large loss-of-coolant accident and in response to post-trip shutdown cooling) at 93 U.S. commercial operating nuclear reactors. New Standardized Plant Analysis Risk (SPAR) models with the most recent SPAR parameter update results were used in this report. Demand, run hour, and failure data from 1998–2022 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Industry Reporting and Information System (IRIS), formerly the INPO Consolidated Events Database. The unreliability results are trended for the most recent 10-year period while yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing or decreasing trends were identified in the RHR results.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2026

Extracting Critical Metals from Authentic Bauxite Residue

Securing domestic sources of critical minerals (CM) is paramount to ensuring a robust and self-sustaining technology infrastructure. Utilizing untapped non-conventional sources, like acid mine drainage, coal ash, bauxite residue/red mud, and more is an emerging approach that addresses this national concern while identifying new value-added pathways originating from waste streams. Red mud is a byproduct of the Bayer process that produces alumina and contains a wealth of CM – 50 µg/g Ga, 2.9 mg/g total rare earth elements plus yttrium, 12 mg/g Mn, 58 mg/g Al, and others. About 170 MM tonnes of red mud are co-produced annually alongside the 142 MM tonnes of alumina generated, highlighting the abundancy of this feedstock. In this work, different strategies were explored for extracting CM from authentic bauxite residue that involve thermal heating, microwave heating, and sonication all with different acids and buffers. CM recovery was then explored one step further by testing the adsorption of the extracted metals onto NETL’s Multi-functional Sorbent Technology (MUST). Microwave treatment of red mud proved the most effective CM extraction, whereas sonication was less desirable due to scale-up concerns. Successful recovery of CM from this leachate with MUST supports further studies toward optimizing the overall process.

bauxite residue↗
DOE OSTI2026

System Study: Residual Heat Removal 1998-2024

This report presents an unreliability evaluation of the residual heat removal (RHR) system in two modes of operation (low-pressure injection in response to a large loss-of-coolant accident and in response to post-trip shutdown cooling) at 93 U.S. commercial operating nuclear reactors. New Standardized Plant Analysis Risk (SPAR) models with the most recent SPAR parameter update results were used in this report. Demand, run hour, and failure data from 1998 to 2024 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Industry Reporting and Information System (IRIS), formerly the INPO Consolidated Events Database. The unreliability results are trended for the most recent 10 year period and yearly estimates for system unreliability are provided for the entire active period. Statistically significant and highly statistically significant decreasing trends were observed for RHR low-pressure injection mode start-only unreliability and RHR low-pressure injection model 24-hour unreliability.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗