Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RECYCLABLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Effects of Natural and Artificial Weathering on the Physical Properties of Recycled Poly(ethylene terephthalate)

In accelerated weathering tests, specimens are exposed to higher radiation intensity, temperature and humidity than is likely under natural weathering in order to achieve rapid degradation of the polymer in a convenient short time. In the current work, a correlation between the two environments is attempted so that a prediction of lifetimes in the natural environment can be achieved. During aging, surface flaws are created due to the chain scission process. This is initiated by the absorption of ultra-violet light and directly affects visual appearance and impact strength. After natural weathering, the material shows only plastic deformation in an impact test. However, after artificial weathering to 5000 h of UV exposure, there is a decrease of 85% in impact strength. Colour change occurs at a high rate in the early stages of UV exposure. Beyond 2000 h of exposure, the colour change approaches a steady state and a correlation between the changes under natural and artificial weathering becomes apparent for a potential prediction of lifetimes. From the analysis including the specular component (SCI), taking surface roughening into account, 1 year under natural weathering was found to be equivalent to 25 days under accelerated weathering.

36 MATERIALS SCIENCE↗

Biological Recycling of Polyethylene Terephthalate: A Mini-Review

Plastics have become an inseparable part of our life in the society due to their merits such as low cost, light weight, good mechanical and thermal properties along with easy process ability. Since the last few decades, the unrestrained use of plastics in various fields like agriculture, packaging, transportation has raised a serious issue about its disposal and pollution. An efficient decomposition of plastics takes about 1000 years. Not only there is an increase in the problem of waste disposal of plastics but also they release CO{sub 2} and dioxins on burning which contributes to cause pollution. There is a growing concern for use of efficient microorganisms meant for biodegradation of non-degradable synthetic polymer because conventionally used methods for plastic disposal are ineffective for plastic waste management. This review paper focuses on one such type of plastic-polyethylene terephthalate (PET) which is widely used in a flexible packaging application, its manufacturing process and the various effects of waste generated by it on the surrounding environment. This review discusses an overview of various existing plastic disposal methods along with their limitations and mechanism of biodegradation of PET and factors affecting biodegradation.

54 ENVIRONMENTAL SCIENCES↗

Structure-property relationships and recyclability of natural fiber insulation

Thermal insulation can significantly decrease the energy required to maintain internal temperatures within buildings, saving money and decreasing environmental impacts. Many industrially available insulation options utilize petroleum-derived materials, such as polyurethane, fiberglass, and polystyrene, which can be detrimental to the environment by emitting greenhouse gases during production. A sustainable alternative to these synthetic insulations is the use of renewable feedstocks to produce comparable insulation products. In this work, natural fibers such as flax and banana were bound with an epoxy system to produce natural-fiber insulation. Key experimental parameters for this study included evaluating the fiber lengths and processing methods while varying the viscosity of the epoxy binder solvent dissolution. Insulation performance was determined by comparing density, thermal conductivity, resilience, and compressive strength; these parameters were tested to further understand and investigate the structure- property relationships within the system and to understand how these composites compare to current commercial materials. Furthermore, from this characterization and optimization, a natural fiber sample with an R/in. >5 was achieved, making these materials competitive with commercial alternatives.

Compressive strength↗

Dose-response relationships between urinary phthalate metabolites and serum thyroid hormones among waste plastic recycling workers in China

Highlights: • Maximum urinary phthalate levels of the workers are higher than those of controls. • A non-linear association of urinary MMP with total T3 was found among the workers. • The workers showed a non-linear association of urinary MMP with the T3/T4 ratio. • The workers exhibited a non-linear association of urinary MEP with the T3/T4 ratio. Exposure to phthalates may affect thyroid hormone status. However, there were inconsistent observations for the associations of phthalates exposure with altered thyroid hormones.

54 ENVIRONMENTAL SCIENCES↗

Synthesis, characterization, and recycling of bio-derivable polyester covalently adaptable networks for industrial composite applications

Fiber-reinforced polymers (FRPs) are critical for energy-relevant applications such as wind turbine blades. Despite this, the end-of-life options for FRPs are limited as they are permanently cross-linked thermosets. To enable the circularity of FRPs, we formulated a bio-derivable polyester covalently adaptable network (PECAN), sometimes referred to as a polyester vitrimer, to manufacture FRPs at >1 kg scale, which is accomplished as the resin is infusible (175-425 cP at 25 °C viscosity), can be cured at 80 °C within 5 h and is depolymerizable via methanolysis yielding high-quality fibers and recoverable hardener. The FRPs exhibit a transverse tensile modulus comparable with today's wind relevant FRPs (10.4-11.9 GPa). Modeling estimates a resin minimum selling price of $2.28/kg and, relative to an epoxy-amine resin, PECAN manufacture requires 19%-21% less supply chain energy and emits 33%-35% less greenhouse gas emissions. Overall, this study suggests that redesigned thermosets can yield beneficial circularity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D printing of a recycled copolyester of terephthalic acid, cyclohexanedimethanol and tetramethylcyclobutanediol

2,2,4,4-Tetramethyl-1,3-cyclobutanediol (TMCD) is a diol monomer for terephthalic acid (TPA) class of copolyesters that can increase the glass transition temperature and mechanical strength in comparison to conventional TPA polyesters. TMCD-modified poly (1,4-cyclohexylenedimethylene terephthalate) (PCTT) has been used to manufacture consumer products with good toughness, heat resistance and clarity. However, the suitability of PCTT in 3D printing had not been evaluated. Therefore, consumer plasticware was used as the starting material to investigate the suitability of this copolyester for fused deposition modeling (FDM). Here, chemical structure, mechanical properties, thermal behavior and viscoelastic properties of this copolyester were studied. NMR spectroscopy found that the copolyester had cyclohexanedimethanol (CHDM) and TMCD contents at 76.5 mol% and 20 mol% of total diol, respectively. 280 °C printing temperature and 110 °C bed temperature were suitable conditions for printing. T g of PCTT was 103 °C (25 °C higher than PETG). Young's modulus and impact strength of printed PCTT were at least 100% and 65% higher than printed PETG, respectively. The ease of printing, superior mechanical properties and T g (103 °C) make the PCTT random copolyester highly applicable in additive manufacturing.

36 MATERIALS SCIENCE↗

Recycling of a post-industrial printed multilayer plastic film containing polyurethane inks by solvent-targeted recovery and precipitation

The recently reported Solvent-Targeted Recovery And Precipitation (STRAP) strategy is used to deconstruct multilayer plastic packaging films into their constituent resins by selective polymer dissolution. To broaden the applicability of STRAP, we demonstrate the process with a flexible post-industrial printed multilayer plastic film used for food packaging. The material was a reverse printed film composed of polyethylene (PE), ethylene vinyl alcohol (EVOH), polyethylene terephthalate (PET), and polyurethane (PU)-based inks. Removal of all colors was observed with biomass-derived gamma-valerolactone (GVL) and the recovered polymers possessed comparable properties to the corresponding virgin resins. A technoeconomic analysis indicates that this STRAP process could be economically feasible at a processing capacity of 6,000 tons per year. Furthermore, the production of plastic films with materials recovered by this STRAP process can have a lower climate change impact than the production of films from virgin polymers.

54 ENVIRONMENTAL SCIENCES↗

Lead leaching and electrowinning in acetic acid for solar module recycling

It is imperative to recover lead (Pb) contained in end-of-life solar modules. In this paper, a two-step leaching and electrowinning process using acetic acid is investigated for Pb recovery. Acetic acid with hydrogen peroxide can dissolve Pb quickly and, under some conditions, in a matter of minutes. Pb electrowinning has been successfully demonstrated from aqueous solutions of 0.009 M lead(II) acetate with 0–10% v/v acetic acid. Pb-containing deposits are found on both the copper cathode and graphite anode. X-ray diffraction, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy confirm the presence of metallic Pb and Pb(II) oxide (PbO) co-deposits on the cathode. Further, there is also the formation of lead subacetate on the cathode under certain conditions. On the anode, the deposit consists of lead(IV) oxide and superoxide (PbO 2 and Pb 1–x O 2 ). A Pb recovery rate of 99% is achieved in 0.009 M lead(II) acetate solutions with 10% v/v acetic acid by applying a reduction potential of either –0.8 V or –1.0 V versus the silver/silver chloride reference electrode for 24h. Pb leaching with acetic acid is also demonstrated from milled silicon solar modules.

14 SOLAR ENERGY↗

Recycling of PET bottles as fine aggregate in concrete

An attempt to substitute in concrete the 5% by weight of fine aggregate (natural sand) with an equal weight of PET aggregates manufactured from the waste un-washed PET bottles (WPET), is presented. The WPET particles possessed a granulometry similar to that of the substituted sand. Specimens with different cement content and water/cement ratio were manufactured. Rheological characterization on fresh concrete and mechanical tests at the ages of 28 and 365 days were performed on the WPET/concretes as well as on reference concretes containing only natural fine aggregate in order to investigate the influence of the substitution of WPET to the fine aggregate in concrete. It was found that the WPET concretes display similar workability characteristics, compressive strength and splitting tensile strength slightly lower that the reference concrete and a moderately higher ductility.

54 ENVIRONMENTAL SCIENCES↗