Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Ferroelectric phase transitions in three-component short-period superlattices studied by ultraviolet Raman spectroscopy

Vibrational spectra of three-component BaTiO{sub 3}/SrTiO{sub 3}/CaTiO{sub 3} short-period superlattices grown by pulsed laser deposition with atomic-layer control have been investigated by ultraviolet Raman spectroscopy. Monitoring the intensity of the first-order phonon peaks in Raman spectra as a function of temperature allowed the determination of the ferroelectric phase transition temperature T{sub c}. Raman spectra indicate that all superlattices remain in the tetragonal ferroelectric phase with out-of-plane polarization in the entire temperature range below T{sub c}. The dependence of T{sub c} on the relative thicknesses of ferroelectric (BaTiO{sub 3}) to nonferroelectric materials (SrTiO{sub 3} and CaTiO{sub 3}) has been studied. The highest T{sub c} was found in superlattices having the largest relative amount of BaTiO{sub 3}, provided that the superlattice maintains its coherency with the substrate. Strain relaxation leads to a significant decrease in the ferroelectric phase transition temperature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Energetic recoils in UO2 simulated using five different potentials

This report presents the results of classical molecular dynamics simulations of the diffuse pre-melting transition, melting, and defect production by 1 keV U recoils in UO2 using five different rigid-ion potentials. The experimentally-observed pre-melting transition occurred for all five cases. For all the potentials studied, dynamic defect annealing is highly effective and is accompanied by replacement events on the anion sublattice. The primary damage state after ~15 ps consists of isolated Frenkel pairs and interstitial and vacancy clusters of various sizes. The average displacement energy varies from ~28 to ~83 eV and the number of Frenkel pairs is different by a factor of three depending on the choice of potential. The size and spatial distribution of vacancy and interstitial clusters is drastically different for the potentials studied. The results provide statistics of defect production. They point to a pressing need to determine defect formation, migration and binding energies in UO2 from first principles and to develop reliable potentials based on this data for simulating microstructural evolution in nuclear fuel under operating conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The role of He in enhancing the intensity and lifetime of H and D emissions from laser-induced atmospheric-pressure plasma

A series of measurements have been performed on the time dependences of the intensities of helium, hydrogen, and deuterium emission lines from the corresponding laser-induced helium plasma at atmospheric pressure for two different He flow rates. The prolonged H{sub a}lpha and H{sub b}eta emissions along with their constant intensity ratio over a relatively extended period indicate the need to provide an alternative excitation mechanism other than the well-known thermal excitation process in a hot plasma. This additional excitation mechanism is also related to the metastable excited state of a He atom as indicated by the similar characteristics of the observed time dependence of the emission intensities. The enhanced intensity and lifetime of He emission at a high He flow rate was explained in terms of the collision-induced increase in the number of He atoms excited to above the 2 {sup 1}S{sub 0} metastable state, which was also responsible for the delayed excitation of H and D atoms via an energy transfer mechanism involving a Penning-like chemi-ionization process. Finally, the benefits of He-assisted delayed excitation of H and D atoms and the aforementioned enhanced intensity and lifetime at a high He flow rate were demonstrated by the achievement of clearly resolved H{sub a}lpha and D{sub a}lpha emission lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Intensity distributions of enhanced H emission from laser-induced low-pressure He plasma and a suggested He-assisted excitation mechanism

An experimental study was conducted on the spatial distributions of hydrogen emission intensities from low-pressure plasmas generated by laser ablation of zircaloy-4 and black stone targets in nitrogen and helium ambient gases. In addition to confirming the previously observed intensity enhancement effect in ambient helium gas, the hydrogen and helium emission intensities measured along the plasma expansion direction revealed remarkable extended spatial distributions featuring unexpected maxima near the far end of the plasma where the available shock-wave generated thermal excitation energy should have been significantly reduced. This 'anomalous' feature necessarily implied the presence of an additional excitation process beside the well known shock-wave excitation process which is responsible for the plasma emission of heavy atoms in low-pressure ambient gas. Further analysis of the data led to a suggested physical mechanism explaining the possible contribution of a helium metastable excited state to the unusual phenomenon observed in this experiment.

36 MATERIALS SCIENCE↗

Particle Motion and Energization in a Chaotic Magnetic Field

In nature there are many systems where macroscopic and time varying currents exist. For example, in solar flares, currents in the form of filaments and/or loops have been observed. In a simple asymmetric configuration where steady state currents flow through a straight wire and a loop, a somewhat surprising feature is that the resulting magnetic field can become chaotic depending on the relative size of the currents. This implies that studying particle motion in a time-dependent chaotic magnetic field is a fundamental problem in space plasma physics and it has profound implications to astrophysical phenomena as the solar flares. Because these currents are time dependent, they induce electric fields. Consequently, electrons and ions moving in the field can experience alternating acceleration and deceleration, leading to a second order Fermi acceleration. We discuss here charged particle motion in a chaotic magnetic fields and the energization process. Particle trajectories are obtained by following single particle motion using the Lorentz equation by a 4-th order Runge-Kutta scheme. Implications of our results to particle acceleration and heating at a flare site are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron Transport by Radio Frequency Waves in Tokamak Plasmas

A relativistic kinetic description for momentum and spatial diffusion of electrons by radio frequency (RF) waves and non-axisymmetric magnetic field perturbations in a tokamak is formulated. The Lie perturbation technique is used to obtain a non-singular, time dependent evolution equation for resonant and non-resonant electron diffusion in momentum space and diffusion in configuration space. The kinetic equation for the electron distribution function is different from the usual quasilinear equations as it includes interactions that are non-Markovian. It is suitable for studying wave-particle interaction in present tokamaks and in ITER. A primary goal of RF waves, and, in particular, of electron cyclotron waves, in ITER is to control instabilities like the neoclassical tearing mode (NTM). Non-axisymmetric effects due to NTMs are included in the kinetic formalism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fokker-Planck description of the scattering of radio frequency waves at the plasma edge

In magnetic fusion devices, radio frequency (rf) waves in the electron cyclotron (EC) and lower hybrid (LH) range of frequencies are being commonly used to modify the plasma current profile. In ITER, EC waves are expected to stabilize the neoclassical tearing mode (NTM) by providing current in the island region [R. Aymar et al., Nucl. Fusion 41, 1301 (2001)]. The appearance of NTMs severely limits the plasma pressure and leads to the degradation of plasma confinement. LH waves could be used in ITER to modify the current profile closer to the edge of the plasma. These rf waves propagate from the excitation structures to the core of the plasma through an edge region, which is characterized by turbulence--in particular, density fluctuations. These fluctuations, in the form of blobs, can modify the propagation properties of the waves by refraction. In this paper, the effect on rf due to randomly distributed blobs in the edge region is studied. The waves are represented as geometric optics rays and the refractive scattering from a distribution of blobs is formulated as a Fokker-Planck equation. The scattering can have two diffusive effects--one in real space and the other in wave vector space. The scattering can modify the trajectory of rays into the plasma and it can affect the wave vector spectrum. The refraction of EC waves, for example, could make them miss the intended target region where the NTMs occur. The broadening of the wave vector spectrum could broaden the wave generated current profile. The Fokker-Planck formalism for diffusion in real space and wave vector space is used to study the effect of density blobs on EC and LH waves in an ITER type of plasma environment. For EC waves the refractive effects become important since the distance of propagation from the edge to the core in ITER is of the order of a meter. The diffusion in wave vector space is small. For LH waves the refractive effects are insignificant but the diffusion in wave vector space is important. The theoretical model is general enough to study the effect of density blobs on all propagating cold plasma waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Image Quality and Radiation Dose Assessment of a Digital Mammography System

Image quality and radiation dose of a direct amorphous selenium digital mammography system were considered in terms of contrast to noise ratio (CNR) and average glandular dose (AGD). They were measured for various qualities and breast phantom thicknesses with different types of breast tissue composition to determine optimal radiation quality and dose. Three sets of breast tissue equivalent slabs (30%:70%, 50%:50% and 70%:30% glandular-adipose) with thickness of 2 cm to 7 cm and 0.2 mm aluminum foil were used to provide certain CNR. Two different combinations of anode/ilter material and a wide range of tube voltages were employed for each phantom thickness. Phantom images with grid were acquired using automatic exposure control (AEC) mode for each thickness. Phantom images without grid were also obtained in manual exposure mode by selecting the same anode/filter combination and kVp as the image obtained with grid at the same thickness, but varying mAs of 10 to 200 mAs. Optimization indicated that relatively high energy beam qualities should be used with a greater dose to compensate for lower energy x-rays. The results also indicate that current AEC setting for a fixed detector is not optimal.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Photon Irradiation Response on Ge and Al-Doped SiO{sub 2} Optical Fibres

Recently, research groups have reported a number of radiation effects on the applications of SiO{sub 2} optical fibres with possible use as dosimeter material because these optical fibre provide a good basis for medical radiation dosimetry. The objective of this study is to investigate the thermoluminescence response and fading characteristic for germanium and aluminium doped SiO{sub 2} optical fibres with photon irradiation. These optical fibres are placed in solid phantom and irradiated to 6 and 10 MV photon beam at dose ranging from 0.06 Gy to 0.24 Gy using Primus MLC 3339 linear accelerator at Hospital Sultan Ismail, Johor Bahru. In fading studies, the TL measurements were continued up to 14 days period. The optical fibres will produce glow curves whereby the information is then analyzed. Al and Ge-doped optical fibres have a linear dose-TL signal relationship that is proportionality between the TL signal and the doses. Comparison for TL response between different linear accelerator showed a good agreement because these optical fibres also have a linear dose-TL signal relationship even using different equipments.

36 MATERIALS SCIENCE↗

Dynamics of charged particles in spatially chaotic magnetic fields

The spatial topology of magnetic field lines can be chaotic for fields generated by simple current configurations. This is illustrated for a system consisting of a circular current loop and a straight current wire. An asymmetric configuration of the current system leads to three-dimensional spatially chaotic magnetic fields. The motion of charged particles in these fields is not necessarily chaotic and exhibits intriguing dynamical properties. Particles having initial velocities closely aligned with the direction of the local magnetic field are likely to follow chaotic orbits in phase space. Other particles follow coherent and periodic orbits; these orbits being the same as in the symmetric current configuration for which the field lines are not chaotic. An important feature of particles with chaotic motion is that they undergo spatial transport across magnetic field lines. The cross-field diffusion is of interest in a variety of magnetized plasmas including laboratory and astrophysical plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Note: A portable pulsed neutron source based on the smallest sealed-type plasma focus device

Development and operation of a portable and compact pulsed neutron source based on sealed-type plasma focus (PF) device are reported. The unit is the smallest sealed-type neutron producing PF device. The effective volume of the PF unit is 33 cm{sup 3} only. A compact size single capacitor (4 {mu}F) is used as the energy driver. A battery based power supply unit is used for charging the capacitor and triggering the spark gap. The PF unit is operated at 10 kV (200 J) and at a deuterium gas filling pressure of 8 mb. The device is operated over a time span of 200 days and the neutron emissions have been observed for 200 shots without changing the gas in between the shots. The maximum yield of this device is 7.8 x 10{sup 4} neutrons/pulse. Beyond 200 shots the yield is below the threshold (1050 neutrons/pulse) of our {sup 3}He detector. The neutron energy is evaluated using time of flight technique and the value is (2.49 {+-} 0.27) MeV. The measured neutron pulse width is (24 {+-} 5) ns. Multishot and long duration operations envisage the potentiality of such portable device for repetitive mode of operation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Radiation Effects In Space

Protecting space missions from severe exposures from radiation, in general, and long duration/deep space human missions, in particular, is a critical design driver, and could be a limiting factor. The space radiation environment consists of galactic cosmic rays (GCR), solar particle events (SPE), trapped radiation, and includes ions of all the known elements over a very broad energy range. These ions penetrate spacecraft materials producing nuclear fragments and secondary particles that damage biological tissues and microelectronic devices. One is required to know how every element (and all isotopes of each element) in the periodic table interacts and fragments on every other element in the same table as a function of kinetic energy ranging over many decades. In addition, the accuracy of the input information and database, in general and nuclear data in particular, impacts radiation exposure health assessments and payload penalty. After a brief review of effects of space radiation on materials and electronics, human space missions to Mars is discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamic modelling of a double-pendulum gantry crane system incorporating payload

The natural sway of crane payloads is detrimental to safe and efficient operation. Under certain conditions, the problem is complicated when the payloads create a double pendulum effect. This paper presents dynamic modelling of a double-pendulum gantry crane system based on closed-form equations of motion. The Lagrangian method is used to derive the dynamic model of the system. A dynamic model of the system incorporating payload is developed and the effects of payload on the response of the system are discussed. Extensive results that validate the theoretical derivation are presented in the time and frequency domains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Relation between crystallinity and chemical nature of surface on wettability: A study on pulsed laser deposited TiO{sub 2} thin films

Pure titania (TiO{sub 2}) polycrystalline thin films in rutile, anatase and mixed phase have been grown on amorphous glass substrates by pulsed laser deposition method at various oxygen gas pressure. Wettability investigations have been carried out on these films. Consistent with our previous report [J. Phys. D: Appl. Phys. 41, 155308 (2008)] it has been observed that for nearly same surface roughness large contact angle or superhydrophobicity is present when sample has a pure single phase and lower contact angle or hydrophobicity when mixed phases were present. Structural characterizations suggest that in addition to roughness, pure phase film surface associated with hydrophobic sites and mixed phase film surface show association of both hydrophobic and hydrophilic sites, which might be inducing specific wetting character. UV treatment induces superhydrophilicity in the films. It was observed that UV irradiation causes nonequilibrium state on the TiO{sub 2} surface, leading to changes in the electron density, which in turn produces decrement in the crystallinity and lattice expansion. Reversible changes in the wetting state on the pure phase surfaces were observed to be faster than those on the mixed phase surfaces. We tried to establish the possible relation between crystalline phases, chemical nature of surface on reversible wettability besides the main governing parameter viz. surface roughness.

36 MATERIALS SCIENCE↗

Direct observation of fatigue in epitaxially grown Pb(Zr,Ti)O 3 thin films using second harmonic piezoresponse force microscopy

In this study, we present a direct observation of fatigue phenomena in epitaxially grown Pb(Zr 0.2 Ti 0.8 )O 3 (PZT)thin films using second harmonic piezoresponse force microscopy (SH-PFM). We observed strong correlation between the SH-PFM amplitude and phase signals with the remnant piezoresponse at different switching cycles. The SH-PFM results indicate that the average fraction of switchable domains decreases globally and the phase delays of polarization switching differ locally. In addition, we found that the fatigue developed uniformly over the whole area without developing region-by-region suppression of switchable polarization as in polycrystalline PZTthin films.

36 MATERIALS SCIENCE↗

Deuterium analysis in zircaloy using ps laser-induced low pressure plasma

An experimental study on picosecond laser induced plasma spectroscopy of a zircaloy sample with low-pressure surrounding helium gas has been carried out to demonstrate its potential applicability to three-dimensional quantitative micro-analysis of deuterium impurities in zircaloy. This was achieved by adopting the optimal experimental condition ascertained in this study, which is specified as 7 mJ laser energy, 1.3 kPa helium pressure, and 50 {mu}s measurement window, and which was found to result in consistent D emission enhancement. Employing these operational parameters, a linear calibration line exhibiting a zero intercept was obtained from zircaloy-4 samples doped with various concentrations of D impurity, regarded as surrogates for H impurity. An additional measurement also yielded a detection limit of about 10 {mu}g/g for D impurity, well below the acceptable threshold of damaging H concentration in zircaloy. Each of these measurements was found to produce a crater size of only 25 {mu}m in diameter, promising its application for performing less-destructive measurements. The result of this study has thus paved the way for conducting a further experiment with hydrogen-doped zircaloy samples and the further technical development of a three-dimensional quantitative micro-analysis of detrimental hydrogen impurity in zircaloy vessels used in nuclear power plants.

36 MATERIALS SCIENCE↗