Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Intelligent Change Detection System: Autonomous Intelligent Machine Agent Model Development

NASA’s significant role in facilitating the harmonious integration of unmanned aircraft systems (UAS), with other aerial vehicles operating in the National Airspace System (NAS), has revealed a need for more advanced technological tools than are being utilized currently. This technology would lend itself to significantly assisting Direct-Action Aviation Personnel (DAAP) with the ingress and egress of UAS operations within the NAS. Providing research findings that would reduce technical barriers, associated with UAS-NAS integration, has been a persistent effort by both NASA and the FAA. One such research effort, pursued by NASA’s Transformative Tools and Technologies – Revolutionary Aviation Mobility (T3-RAM) project, is the development of an autonomous intelligent machine (AIM) agent that would aid DAAP functioning as implemented in remote ground control stations (RGCS). This evolution of the “human-machine” symbiosis, within the aviation environment, is necessary for many reasons. For example, there are projections of large increases to the 864,000 registered UAS and 45,000 aviation operations taking place in the NAS each day. With a data output range from 1 to 20 terabytes per flight or each aerial vehicle, which is projected to have proportional rate increase to that of registered UASs. It is evident, that due to the projected increase of UASs and their generated data, the human-agent’s data managing capabilities will be quickly overwhelmed by the enormous amounts of data emanating in the NAS. The research efforts presented in this paper puts forward results from the development, assessment, and verification of a previously conceptualized AIM-Agent that combats actionable-data (information) errors resulting from the visual perception phenomenon known as “change blindness” (CB). CB has been identified as one of the main culprits of information erroring encountered within the ground control station operator (GCSO) community.

Change Blindness↗

Overview of Results from the MISSE 9-15 Polymers and Composites Experiment 1-4 (PCE 1-4)

Spacecraft in low Earth orbit (LEO) and other planetary orbits are subjected to harsh environmental conditions that can result in erosion, embrittlement and optical property degradation of susceptible materials threatening spacecraft performance and durability. To increase our understanding of space environmental effects on spacecraft materials, NASA Glenn Research Center has developed a series of experiments flown as part of the Materials International Space Station Experiment (MISSE) missions on the exterior of the International Space Station (ISS). Four Glenn experiments with 365 flight samples were flown on ISS’s MISSE-Flight Facility (MISSE-FF). These experiments are the Polymers and Composites Experiment-1 (PCE-1) flown as part of the MISSE-9 mission, the PCE-2 flown as part of the MISSE-10 mission, the PCE-3 flown as part of the MISSE-12 and MISSE-15 missions, and the PCE-4 flown as part of the MISSE-13 mission. The PCE 1-4 flight samples were flown in either ram, wake, zenith or nadir flight orientations. The primary objectives of the PCE 1-4 experiments are to determine the LEO atomic oxygen (AO) erosion yield, Ey (volume loss per incident oxygen atom) and radiation durability of spacecraft polymers, composites and coatings. In addition, each experiment has a wide variety of materials with numerous sample objectives. This presentation provides an overview of the PCE 1-4 experiments, the numerous sample collaborators, the space environmental exposure of the flight samples, and an overview of the post-flight observations and results. The results include AO fluence and contamination analyses for each mission flight orientation, erosion data for the PCE 1-4 AO Ey samples, optical property data, and tensile results for the MISSE-9 and MISSE-13 tensile samples. In addition, an introduction of results from other unique samples such as indium tin oxide (ITO) coated thermal control samples, shape memory polymer composites, melanin based composites, and specialty coatings, will be provided.

Atomic oxygen↗

Passive Cooling for Mercury Surface Lander Electronics

A significant barrier to operation of a mission on the surface of Mercury is the temperature. At Mercury’s perihelion distance of 0.313 AU, the solar intensity is 10.6 times the solar flux at Earth orbit, and at the subsolar point, the maximum surface temperature reaches 427°C. For a mission landing on the surface of Mercury at latitude of 40°S, we analyzed using passive thermal control to reduce the temperature of the critical electronics to within the operation temperature limits of silicon devices. The thermal control requires reducing the thermal conductance and infrared flux from the high temperature surface and surrounding spacecraft, and moderating the solar heat input using a surface coating with high solar reflectivity, and maximizing thermal cooling with high infrared emissivity. Using this approach, we find that we can passively cool an electronics box to a temperature of 393K (120°C) using a radiator-white surface with solar absorptivity 0.11 and infrared emissivity 0.91. This temperature is well under 175C target we use for the limits of high-temperature silicon integrated circuits, including RAM and microcontrollers. We could further reduce this operating temperature to as low as 321K (48°C) with an advanced thermal coating, a temperature well within the operational limits of conventional electronics.

Mercury↗

A Call To Action To Engage The Community To Meet The Challenges That Must Be Tackled To Make Electrified Aircraft Propulsion Real

Technology risk reduction is essential, as it is necessary to demonstrate the potential of Electrified Aircraft Propulsion (EAP). However, more is needed for implementation. The industry is leading EAP by developing a diverse community of novel vehicles from short-haul, small, urban-focused electric vertical takeoff and landing (eVTOL) to regional air mobility (RAM) and hybrid-electric, single-aisle transport category airplanes. There are a variety of novel EAP technologies for each of these novel vehicles. And the industry is not only looking at novel technology to advance the state of the art. Instead, the industry is looking to certify these novel aircraft through their regulatory authorities, such as the US Federal Aviation Administration (FAA), the European Union Aviation Safety Authority (EASA), Transport Canada Civil Aviation (TCCA), and Brazil’s Agência Nacional de Aviação Civil (National Civil Aviation Agency, ANAC), as well as other regulatory authorities. The NASA Electrified Powertrain Flight Demonstration (EPFD) project has partnered with two industry partners to advance integrated MW-class powertrain system technology demonstration that includes an assessment of their regulatory and standards gaps in their technology. The EPFD has conducted a generic regulatory gap analysis of hybrid electric engines that aligns with the industry partners’ efforts. The EPFD regulations and standards team is integrated into the industry standards community. The international industry standards community is wrestling with critical key challenges to certification. While some certification elements are proprietary, several technology elements cut across company propriety in aircraft engines (US 14 CFR Part 33 and EASA CS-E, regulations that only reflect reciprocating and turbine engines). The approach that several of these regulatory authorities have taken is to collaborate to address their challenges. The Certification Management Team (CMT) consists of the EASA, FAA, TCCA, and ANAC, and they have begun to address common questions, such as the Loss of Power Control (LOPC) for electric engines. They have reached out to the standards community to seek answers. The industry standards development organizations (SDO) have also looked ahead to address current regulations and standards gaps. The ASTM has built key committees in its ASTM F44 General Aviation Committee and F39 Aircraft Systems Committee. The SAE has established the E-40 Electric Propulsion and AE-10 High Voltage committees.

Standards↗

A Call To Action To Engage The Community To Meet The Challenges That Must Be Tackled To Make Electrified Aircraft Propulsion Real

Technology risk reduction is essential, as it is necessary to demonstrate the potential of Electrified Aircraft Propulsion (EAP). However, more is needed for implementation. The industry is leading EAP by developing a diverse community of novel vehicles from short-haul, small, urban-focused electric vertical takeoff and landing (eVTOL) to regional air mobility (RAM) and hybrid-electric, single-aisle transport category airplanes. There are a variety of novel EAP technologies for each of these novel vehicles. And the industry is not only looking at novel technology to advance the state of the art. Instead, the industry is looking to certify these novel aircraft through their regulatory authorities, such as the US Federal Aviation Administration (FAA), the European Union Aviation Safety Authority (EASA), Transport Canada Civil Aviation (TCCA), and Brazil’s Agência Nacional de Aviação Civil (National Civil Aviation Agency, ANAC), as well as other regulatory authorities. The NASA Electrified Powertrain Flight Demonstration (EPFD) project has partnered with two industry partners to advance integrated MW-class powertrain system technology demonstration that includes an assessment of their regulatory and standards gaps in their technology. The EPFD has conducted a generic regulatory gap analysis of hybrid electric engines that aligns with the industry partners’ efforts. The EPFD regulations and standards team is integrated into the industry standards community. The international industry standards community is wrestling with critical key challenges to certification. While some certification elements are proprietary, several technology elements cut across company propriety in aircraft engines (US 14 CFR Part 33 and EASA CS-E, regulations that only reflect reciprocating and turbine engines). The approach that several of these regulatory authorities have taken is to collaborate to address their challenges. The Certification Management Team (CMT) consists of the EASA, FAA, TCCA, and ANAC, and they have begun to address common questions, such as the Loss of Power Control (LOPC) for electric engines. They have reached out to the standards community to seek answers. The industry standards development organizations (SDO) have also looked ahead to address current regulations and standards gaps. The ASTM has built key committees in its ASTM F44 General Aviation Committee and F39 Aircraft Systems Committee. The SAE has established the E-40 Electric Propulsion and AE-10 High Voltage committees.

Standards↗

Final Report on Radiation Measurements Performed Inside of the BEAM Module

Measurements of the radiation environment inside of the Bigelow Expandable Activity Module (BEAM) have been made on a pseudo-continuous basis since June 6, 2016 using both passive and active instrumentation. Passive detectors yield a single cumulative dose value (or average daily dose) over the measurement period from deploy to return to ground. Active Radiation Environment Monitor (REM) sensors yield dose rate, Linear Energy Transfer (LET) spectra, and particle-specific dose, all on a 1-minute cadence. From the initial install in 2016 until early 2018, BEAM was an empty module. In 2018, further testing was approved and stowage began to be moved into BEAM. As a result, it was decided to stop measurements with RAM detectors to avoid potential difficulties with access after stowage was added. The REM sensors remained however in the original deploy locations.

radiation exposure↗

A Break In the Size-Stellar Mass Relation: Evidence for Quenching and Feedback in Dwarf Galaxies

Mapping stars and gas in nearby galaxies is fundamental for understanding their growth and the impact of their environment. This issue is addressed by comparing the stellar ‘edges’ of galaxies D stellar, defined as the outermost diameter where in situ star formation significantly drops, with the gaseous distribution parameterized by the neutral atomic hydrogen diameter measured at 1M⊙/pc2,DHI. By sampling a broad HI mass range 105M⊙< MHI<1011M⊙, we find several dwarf galaxies withMHI<109M⊙from the field and Fornax Cluster which are distinguished by D stellar>> DHI. For the cluster dwarfs, the average HI surface density near D stellar is∼0.3M⊙/pc2, reflecting the impact of quenching and outside-in gas removal from ram pressure and tidal interactions. In comparison, D stellar/DHI ranges between 0.5–2 in dwarf field galaxies, consistent with the expectations from stellar feedback. Only more massive disk galaxies in the field can thus be characterized by the common assumption that D stellar≲DHI. We discover a break in the D stellar−M⋆relation atm break∼4×108M⊙that potentially differentiates the low mass regime where the influence of stellar feedback and environmental processes more prominently regulates the sizes of nearby galaxies. Our results highlight the importance of combining deep optical and HI imaging for understanding galaxy evolution.

Scaling relations↗

Passive Cooling for Mercury Surface Lander Electronics

A significant barrier to operation of a mission on the surface of Mercury is the temperature. At Mercury’s perihelion distance of 0.313 AU, the solar intensity is 10.6 times the solar flux at Earth orbit, and at the subsolar point, the maximum surface temperature reaches 427°C. For a mission landing on the surface of Mercury at latitude of 40°S, we analyzed using passive thermal control to reduce the temperature of the critical electronics to within the operation temperature limits of silicon devices. The thermal control requires reducing the thermal conductance and infrared flux from the high temperature surface and surrounding spacecraft, and moderating the solar heat input using a surface coating with high solar reflectivity, and maximizing thermal cooling with high infrared emissivity. Using this approach, we find that we can passively cool an electronics box to a temperature of 393K (120°C) using a radiator-white surface with solar absorptivity 0.11 and infrared emissivity 0.91. This temperature is well under 175C target we use for the limits of high-temperature silicon integrated circuits, including RAM and microcontrollers. We could further reduce this operating temperature to as low as 321K (48°C) with an advanced thermal coating, a temperature well within the operational limits of conventional electronics

Mercury↗

Manifold Integrated Pyrovalve

The Manifold Integrated Pyrovalve (MI-PV) provides a state-of-the-art, low mass, low volume, normally-closed (NC) pyrotechnic isolation valve configuration which is optimized for small free-flier applications. Small scale free-flier (e.g. CubeSat) applications require high pressure fluid isolation valves with leak rates low enough to endure long pad stays, and often have severe mass and volume limitations. The MI-PV utilizes a unique configuration where the shear section and the pyrotechnic ram assembly (PRA) are installed directly into a ported gas manifold, allowing elimination of heavy fluid fittings and connections. This configuration can be readily scaled and adapted to the needs of other long duration missions.

valve pyrovalve pyrotechnic↗

Exposure of Highly Reflective Far-Ultraviolet Coatings to LEO Environment for TRL Advancement for the Habitable Worlds Observatory

Over the past several years, our team at the NASA Goddard Space Flight Center (GSFC), in collaboration with the Jet Propulsion Laboratory (JPL) and the Naval Research Laboratory (NRL), have developed several new protected Al coating technologies with improved Far-Ultraviolet (FUV) reflectance performance and more robust environmental stability. These include Al protected with lithium-based fluoride (LiF) coatings such as hot deposited LiF (eLiF), XeF 2 -passivated LiF coatings (XeLiF), Li 3 AlF 6 overcoats, AlF 3 (plasma passivated), and XeF 2 passivated MgF 2 coatings (XeMgF 2 ). However, despite these developments, relatively little experimental information exists regarding the long-term stability of these coatings after simultaneous exposure to the Low Earth Orbit (LEO) environment. To evaluate their environmental durability and advance their Technology Readiness Level (TRL), representative samples of these coating technologies, Al+XeLiF, Al+eLiF, Al+Li 3 AlF 6 , Al+AlF 3 , Al+XeMgF 2 , and bare Al as reference samples, were flown onboard the International Space Station (ISS) as part of the Materials International Space Station Experiment 20 (MISSE-20). The MISSE platform is operated by Aegis Aerospace for relatively long-duration (e.g. 6 months) external exposure experiments in a space environment. The coatings were deposited on ULE and Zerodur substrates, and witness samples deposited on the same coatings runs, but on glass slides were left on Earth as control. A subset of the flight samples were fitted with MgF 2 windows to reduce direct exposure to atomic oxygen (AO) and charged particles, and still let through UV and other types of radiation on these samples. After approximately 6 months of exposure in the forward-facing (RAM) direction, the samples were returned to Earth and characterized by performing FUV/NUV/VIS/NIR reflectance measurements to quantify degradation, spectroscopic ellipsometry to evaluate coating thickness and optical constants, atomic force microscopy (AFM) to quantify surface roughness evolution during the flight in the ISS. The MgF 2 protective windows were also analyzed through FUV transmission measurements. Comparison with the witness samples left on the ground and with the flown bare Al samples (with just the naturally occurring Al 2 O 3 layer) provided a quantitative assessment of coating thickness variations, optical performance degradation, and morphological changes induced by prolonged exposure to the LEO environment.

Far Ultraviolet (FUV)↗

Implications of pressure diffusion for shock waves

The report deals with the possible implications of pressure diffusion for shocks in one dimensional traveling waves in an ideal gas. From this new hypothesis all aspects of such shocks can be calculated except shock thickness. Unlike conventional shock theory, the concept of entropy is not needed or used. Our analysis shows that temperature rises near a shock, which is of course an experimental fact; however, it also predicts that very close to a shock, density increases faster than pressure. In other words, a shock itself is cold.

Ram, Ram Bachan↗

Noise analysis of nucleate boiling

The techniques of noise analysis have been utilized to investigate nucleate pool boiling. A simple experimental setup has been developed for obtaining the power spectrum of a nucleate boiling system. These techniques were first used to study single bubbles, and a method of relating the two-dimensional projected size and the local velocity of the bubbles to the auto-correlation functions is presented. This method is much less time consuming than conventional methods of measurement and has no probes to disturb the system. These techniques can be used to determine the contribution of evaporation to total heat flux in nucleate boiling. Also, these techniques can be used to investigate the effect of various parameters upon the frequency response of nucleate boiling. The predominant frequencies of the power spectrum correspond to the frequencies of bubble generation. The effects of heat input, degree of subcooling, and liquid surface tension upon the power spectra of a boiling system are presented. It was found that the degree of subcooling has a more pronounced effect upon bubble size than does heat flux. Also the effect of lowering surface tension can be sufficient to reduce the effect of the degree of subcooling upon the size of the bubbles.

Mcknight, R. D.↗

Blade planform for a quiet helicopter

The effects of blade planform and tip speed on noise and performance for a Hughes 500 C rotor system were studied. A cursory examination of the effects of such planform shapes as regular, inverse, and no taper on the noise and performance of the rotor was conducted. It was found that a constant width wide chord planform at tower tip speed provided the best performance and lowest noise. The tapered planforms had lower performance figures due to the reduced solidity. However, some noise reductions were achieved.

Ram, D. S. J.↗

Hybrid approach to steady transonic normal-shock compressible laminar boundary-layer interactions over airfoils

A simulation of steady transonic viscous-inviscid interactions through a combination of zonal solution methods (involving different equation sets and numerical regions for various flow regions) is used in an investigation of a fluid mechanics problem in which the pressure distribution is determined by the interaction between transonic inviscid flow and an inner laminar viscous layer. The results obtained are in good agreement with laminar experimental data. Both attached and separated boundary layer flows are considered for either weak or strong interactions.

Ram, R. B.↗