Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plumes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Differential Yields and Uncertainty Assessments for Electric Propulsion Plume Impingement Sputter Redeposition Contamination

Redeposition of sputtered erosion products from electric propulsion plume impingement is a contamination concern for spacecraft. Calculation of expected deposition quantities requires accurate characterization of the angular distribution of differential yields. An evaluation of available expressions is performed as well as a derivation of an alternate form that can better match experimental measurements through more general inclusion of anisotropic effects. The derivation is extended to the dependence of the total yield on incident angle. Considerations of the inherent uncertainty in both total and differential yields and accounting of subsequent margins for end applications are also discussed.

sputtering↗
NASA NTRSDate not supplied

Plume Surface Interaction (PSI) Instrumentation

The Importance of Plume Surface Interaction Ejecta Velocity Measurements for Planetary Landers. Note: pdf is accompanied by the PowerPoint presentation which contain videos on slide 7, 9, and 10

PSI↗
NASA NTRS2022

Perturbations in Stratospheric Aerosol Evolution Due to the Water-Rich Plume of the 2022 Hunga-Tonga Eruption

The January 2022 Hunga Tonga-Hunga Ha'apai (HTHH) volcanic eruption injected a relatively small amount of SO2, but significantly more water into the stratosphere than previously seen in the modern satellite record. Here we show that the large amount of water resulted in large perturbations to stratospheric aerosol evolution. Our Community Earth System Model simulation reproduces the enhanced water vapor observed by the Microwave Limb Sounder at pressure levels between 10 and 50 hPa for three months. Compared with a simulation without a water injection, this additional source of water vapor increases OH, which halves the SO2 lifetime. Subsequent coagulation creates larger sulfate particles that double the stratospheric aerosol optical depth. A seasonal forecast of volcanic plume transport in the southern hemisphere indicates this eruption will greatly enhance the aerosol surface area and water vapor near the polar vortex until at least October 2022, suggesting that there will continue to be an impact of the HTHH eruption on the climate system.

Atmospheric science↗
NASA NTRSDate not supplied

Gulf of Mexico Health & Air Quality: Mapping Methane Emission Plumes Using Sunglint-configured Imagery for Monitoring Offshore Oil and Gas Activity

We had three project objectives that we set out to accomplish. The first objective is to demonstrate how remote sensing can complement the current bottom-up methane emission assessments. Currently, quantities of disposed gas vented and flared are self-reported by operators to BOEM and BSEE. Meanwhile, inspections are uncommon, and ground sensors are non-existent. Therefore, remote sensing may be the agencies' best bet in verifying these operator accounts. The second objective is to identify methane plumes in the Gulf of Mexico, Asia, and elsewhere using Sentinel-2, LandSat, and PRISMA images, and then present an estimate of their emission rate. While methane retrievals from oil and gas infrastructure on-shore has been relatively well-documented, doing so on the offshore oil and gas platforms is more difficult, less prevalent, and contingent on the presence of specific conditions. The final objective is to give our partners, BOEM and BSEE, a more robust understanding of methane emissions from oil and gas production in the Gulf of Mexico. This increased knowledge, paired with a demonstration of methane monitoring, is intended to help our partners think about how they can incorporate remote sensing into their monitoring, regulatory and enforcement framework.

Ben Dahan↗
NASA NTRSDate not supplied

Qualitative Comparison of Pathfinder Three-Dimensional Transient Gas Granular Simulation Results to Imagery from a Subscale, Reduced Pressure Plume Surface Interaction Ground Test

NASA’s Game Changing Development Program, funded by NASA’s Space Technology Mission Directorate, the development of simulation capability for the prediction of extra-terrestrial Plume Surface Interaction (PSI) environments has been undertaken by the Fluid Dynamics Branch at NASA/MSFC. The PSI Project, planned to be completed over a four year period, contains a Predictive Simulation Capability (PSC) Element focused on creating simulation capability for the reliable and accurate prediction of PSI in Martian (~600 Pa) and Lunar (vacuum) ambient environments. In addition to the PSC Element, the PSI Project also contains a companion Ground Testing Element for development of focused datasets for validation of predictive capability as well as a Flight-focused Instrumentation Element. This paper describes the first Pathfinder three-dimensional, transient simulation of the test configuration used to acquire erosion and cratering test data as part of the Physics Focused Ground Test conducted by the PSI Project in FY2021. This first pathfinder simulation was conducted using the Loci/GGFS (Gas Granular Flow Solver), a computational fluid dynamics tool developed in part with funding provided by the PSI Project. Crater growth and ejecta flow paths from the pathfinder simulation is compared to raw high-speed imagery PFGT results of the crater growth. There is significant similarity of test and simulation to warrant expending resources on a more rigorous quantitative Validation Assessment.

J S West↗
NASA NTRSDate not supplied

Qualitative Comparison of Pathfinder Three-Dimensional Transient Gas Granular Simulation Results to Imagery from a Subscale, Reduced Pressure Plume Surface Interaction Ground Test

NASA’s Game Changing Development Program, funded by NASA’s Space Technology Mission Directorate, the development of simulation capability for the prediction of extra-terrestrial Plume Surface Interaction (PSI) environments has been undertaken by the Fluid Dynamics Branch at NASA/MSFC. The PSI Project, planned to be completed over a four year period, contains a Predictive Simulation Capability (PSC) Element focused on creating simulation capability for the reliable and accurate prediction of PSI in Martian (~600 Pa) and Lunar (vacuum) ambient environments. In addition to the PSC Element, the PSI Project also contains a companion Ground Testing Element for development of focused datasets for validation of predictive capability as well as a Flight-focused Instrumentation Element. This paper describes the first Pathfinder three-dimensional, transient simulation of the test configuration used to acquire erosion and cratering test data as part of the Physics Focused Ground Test conducted by the PSI Project in FY2021. This first pathfinder simulation was conducted using the Loci/GGFS (Gas Granular Flow Solver), a computational fluid dynamics tool developed in part with funding provided by the PSI Project. Crater growth and ejecta flow paths from the pathfinder simulation is compared to raw high-speed imagery PFGT results of the crater growth. There is significant similarity of test and simulation to warrant expending resources on a more rigorous quantitative Validation Assessment.

Jeff West↗
NASA NTRSDate not supplied

Mantle Plume Magmatism in Elysium Planitia as Constrained by InSight Seismic Observations

Based on cratering statistics, there has been active volcanism in the last 100 Ma and possibly the last 1 to 10 Ma in both central Elysium Planitia and in the Cerberus Fossae region of south-eastern Elysium. Seismic measurements by the InSight mission show a strong concentration of seismicity in Cerberus Fossae which are interpreted as due to magma transport along dike systems. Together, these observations strongly support the existence of geologically recent and possibly of currently active magmatism in Elysium. InSight seismic observations were also used to construct seismic velocity models for the martian mantle. These models are effectively a regional aver-age of the seismic velocity structure for the Elysium region, where both the InSight lander and most of the measured seismic events are located. These seismic velocity models have been interpreted in terms of the lithospheric thickness and mantle potential temperature. Khan et al. found a lithospheric thickness of 400 to 600 km and a mantle potential temperature of 1325 to 1425 °C. Durán et al. found a lithospheric thickness of ~450 km and a mantle potential tempera-ture of 1375-1475 °C. Drilleau et al. found a thermal lithosphere of 420-660 km and a mantle potential temperature of 1380-1560 °C. In this study, we combine these InSight seismic observations with finite element mantle plume magma production models to place new constraints on the properties of the mantle beneath Elysium Planitia.

Walter S Kiefer↗
NASA NTRS2021

Three-Dimensional Measurement of the Crater Formation During Plume–Surface Interactions Using Stereo-Photogrammetry

The present investigation focused on adapting and validating stereo-photogrammetry for obtaining 3-D, time-resolved, non-intrusive, full-domain measurements of crater evolution during the plume-surface interaction (PSI) process. An atmospheric experimental facility was designed and constructed to facilitate the development of the stereo-photogrammetry technique for PSI applications. Stereo-photogrammetry was then used to measure the dynamic crater evolution process at nozzle heights of 25, 40, 55, and 70 nozzle diameters above the sand simulant bed. From the stereo-photogrammetry data, time-resolved 3-D reconstructions of the crater geometry were generated, and crater depth, radius, and volume time histories were extracted. Crater depth was observed to grow logarithmically for the two highest nozzle heights, and the depth growth rate for the lower two nozzle heights was more rapid. Crater volume growth was well characterized by a power law fit. The slope of the collapsed crater post nozzle flow was found to increase with nozzle height, along with the final crater volume. The results show that stereo-photogrammetry can be used to successfully measure the crater geometry in cases where optical access to the crater is not completely degraded by ejected particles.

DC Stubbs↗
NASA NTRSDate not supplied

Moving Beyond Apollo: Vacuum Ground Testing to Reduce Plume-Surface Interaction Risks to Lunar Landers

NASA’s Artemis Program will return humans to the surface of the Moon for the first time since Apollo using the Human Landing System (HLS). Plume-surface interactions (PSI) pose a potential hazard to all propulsive landing vehicles and future nearby assets that will be part of a sustained lunar architecture. Risks due to uncertainty in PSI predictions have challenged lunar landers since the 1960s, and understanding these phenomena further remains critical to enabling NASA’s lunar exploration goals. To this end, the HLS Program has funded a risk reduction ground test to obtain data relevant for application to environments produced by large landing systems. New data are needed to understand PSI and effects with the potential to differ from those experienced by the Apollo landers. This presentation will discuss the test concept, facility, research goals, methods, and planned data products.

Moon↗
NASA NTRSDate not supplied

Attenuation of Solar Energetic Particles By Wave-Particle Interaction With an Ion Thruster Plume

Solar energetic particles (SEP) are a significant concern for interplanetary human spaceflight. This work investigates wave-particle interactions caused by the incidence of a beam of energetic protons, representing a notional SEP event, onto a cloud of xenon ions, representing a notional ion thruster plume. The resulting electromagnetic ion/ion instability is developed to investigate the degree to which energetic protons can be scattered out of the initial beam.

space weather↗
NASA NTRSDate not supplied

Multi-Spectral Lidar Observations and Balloon Borne Validation of SO 2 -O 3 During the SOWLETS Campaign: An Examination of Local Incinerator Plume

The Langley Mobile O3 Lidar (LMOL) was stationed at NASA's Langley Research Center for the initiation of the SO 2 -O 3 Water Land Environment study (SOWLETS). The primary focus of the campaign was to examine the capabilities of a novel four-wavelength detection technique to measure the concentrations of sulfur dioxide (SO2) and ozone (O3). The exact location of the lidar, near the NASA/CAPABLE site, was optimized to intercept the plume emissions from a proximate incinerator facility using historical weather data for the month of the campaign. A novel four-wavelength lidar technique focused on the detection of sulfur dioxide (SO2) and ozone (O3) was employed, and its capabilities were thoroughly examined. The technique is built upon the standard DIAL. While 3 wavelengths would be enough to retrieve both SO2 and O3, the 4 wavelengths allow to provide data on aerosol backscattering. In parallel, SO 2 -O 3 sondes were launched and installed in the nearby NASA Landing and Impact research facility, providing validation for the lidar's atmospheric measurements. In conclusion, this campaign offers an improved understanding of SO2 emissions in the local environment and a validation of a novel technique to facilitate pollution observations. It shows the promise of this new kind of lidar to better understand and validate the observations by NASA/TEMPO ("Tropospheric Emissions: Monitoring of Pollution").

G. Gronoff↗
NASA NTRSDate not supplied

Simulating Sulfate Aerosol Size in the Hunga Tonga Plume: Comparisons with Observations

Using the NASA GEOS Chemistry Climate Model (CCM) coupled to a detailed sectional aerosol microphysical model, we have simulated the January 2022 Hunga Tonga-Hunga Ha’apai (HTHH) plume. We have developed a version of the Global Modeling Initiative (GMI) chemistry mechanism to include the requisite sulfur chemistry and coupled it to the Community Aerosol and Radiation Model for Atmospheres (CARMA) sectional aerosol microphysics within the GEOS CCM. Our simulations focus on the lifecycle of stratospheric sulfur injected by the eruption–from the oxidation of the injected sulfur dioxide to the nucleation, growth, coagulation, hydration, and eventual settling of the volcanic sulfate aerosol particles. In order to constrain the simulated microphysics, we focus on comparing our model to observations with aerosol size information, namely in-situ particle counter observations and multi-wavelength satellite observations from OMPS-LP and SAGE-III. This eruption provides an interesting test case for our model; both the modeled gas-phase chemistry as well as the modeled aerosol microphysics are perturbed by the massive injection of water that accompanied the primary sulfur emissions from the eruption.

aerosols↗
NASA NTRSDate not supplied

Initial Validation of a Gas-Granular Flow Solver Using a Subscale, Reduced Pressure Plume Surface Interaction Ground Test

With NASA’s goal to land the next humans on the lunar surface in the next few years, it is vitally important to have a better understanding of the plume surface interaction (PSI) between the landing vehicles and the lunar regolith. The Fluid Dynamics Branch at NASA/MSFC has previously used the gas-granular flow solver Loci/GGFS to qualitatively predict crater formation due to PSI effects in a lunar (near vacuum) ambient environment. In this paper, validation of Loci/GGFS crater width and depth predictions in ambient near-lunar conditions are provided using experimental data collected at MSFC during the Physics-Focused Ground Test 1 (PFGT-1) campaign in 2022. To observe sensitivity to soil models, simulations were conducted with both monodisperse glass bead (MGB) and BP-1 lunar regolith simulant soil models in Loci/GGFS. Crater depth and width comparisons are made with PFGT-1 Run 56, which used BP-1 soil. The Loci/GGFS BP-1 soil model performed slightly better with a mean predicted crater depth within 10% of the experiment. Both soil models predicted crater width within 10%. Cratering occurred more quickly with the MGB soil model. Mesh and spatial order sensitivity are also examined for the BP-1 soil model.

Validation↗
NASA NTRSDate not supplied

On the Interaction Between a Flow Instability and Inertial Particles in Supersonic Jet Plume-Surface Interaction

Extraterrestrial landings often require spacecraft to deploy supersonic jets directed at dusty planetary surfaces to ensure controlled descents. This interaction, termed plume-surface interaction (PSI), critically influences crater formation and the dynamics of ejected particles, which can obscure vision, damage onboard sensors, and impact nearby infrastructure with significant particle velocities. The physics of PSI remain poorly understood due to the complexities in simulating the involved multiphysics and experimentally replicating reduced atmospheric pressure conditions. This article discusses a collaborative effort to investigate PSI in reduced atmospheric pressure environments using a Mach 5.3 jet impinging on a granular bed. The results highlight observations of an azimuthal pattern in the ejecta distribution, characterized by alternating ejecta streaks of varying particle concentrations. This phenomenon suggests the presence of a low Reynolds number instability, a notable discovery given the supersonic nature of the jet.

PSI↗