Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electrochemical Li intercalation in b-As y P 1–y alloys: In-situ Raman spectroscopy study

Structural evolution of b-As y P 1-y alloys with varying As concentration, y was studied during Li-intercalation using in-situ Raman spectroscopy. A monotonic redshift of all the vibrational modes corresponding to P-P bonds (A 1 g , A 2 g , B 2g ), As-As bonds (A 1 g , A 2 g , B 2g ), and As-P bonds of all the samples was observed during the initial stages of the intercalation process due to the softening of each mode caused by the intercalation driven donor-type charge-transfer from Li to b-As y P 1-y . The emergence of a new peak identified as the E g mode of gray As, above an intercalation threshold, is indicative of the presence of an intercalation-driven structural phase segregation process. Further, the A 1g mode of gray As emerging after this intercalation threshold lies in close proximity of the A 2 g Raman mode of b-As y P 1-y . All the peaks beyond the intercalation threshold show an upshift due to the co-existence of gray As with b-As y P 1-y alloys causing strain and thus hardening of the phonon modes. In the sample with the highest As concentration phase segregation takes place during the synthesis process. Computational modeling reveals the co-existence of gray As in the b-As y P 1-y alloys with high As concentrations. It also confirms the existence of a local structural segregation taking place at a critical Li concentration during the intercalation process. Furthermore, this work shows the significance of intercalation on structural changes in the search for new phases of b-As y P 1-y alloys.

2D Materials↗
DOE OSTI2023

Scalable simulation of coupled adsorption and transport of methane in confined complex porous media with density preconditioning

The growing significance of shales and tight formations in the transition to less carbon-intensive and clean energy drives the research endeavor to understand the physics of gas flow within these systems. However, shales are composed of massively heterogeneous physical and chemical features. Most nano-sized pores connect to millimeter-scale fractures, leading to multiscale transport. These nano-scale pore throats demonstrate non-classical flow behavior, such as non-negligible slip velocities and adsorbed gas layers at the boundary. As a result, classical computational fluid dynamics models do not capture the physics. In this work, we develop a coupling scheme for the multiple-relaxation-time (MRT) lattice Boltzmann (LB) method that integrates the Peng-Robinson equation of state into a pseudo-potential interaction model to capture the physics of methane flow in irregular networks of channels that represent nano-scale porous media. We use atomistic simulations to calibrate and validate our model in slit nano-channels. We propose a preconditioning scheme to initialize the coupled transport and adsorption simulation of methane in complex porous media. The results of this implementation of LB agree with Direct Simulation Monte Carlo (DSMC) and Molecular Dynamics (MD) simulations. We then scale up the LB implementation through vectorization and indirect addressing. We parallelize it using Message Passing Interface (MPI) and OpenMP frameworks to simulate transport and adsorption in complex media with a million lattices. Additionally, we analyze the differences between coupled and transport-only simulations in two case studies and show that considering phase behavior, i.e., adsorption, can significantly change the flow behavior. This work constitutes an important step towards bridging the gap between molecular flow and system-scale behavior of complex disordered porous media.

42 ENGINEERING↗
DOE OSTI2025

Hydration and Restructuring of Polar Polymer Interfaces: Implications in Antifouling and Responsive Materials

Manipulating polymer interfaces is crucial for understanding how structure influences function in applications spanning biofouling prevention to energy storage. Moreover, observing how polymers adapt their microscopic structure to changes in their local environment can reveal essential properties that govern their performance in such applications, providing key insights into how to design more effective interfaces. Here, in this study, a series of “grafting-from” polymer brushes with side chains varying in charge, are probed by sum frequency generation (SFG) and modeled using all-atom molecular dynamics (MD) simulations to elucidate how chemical makeup and charge mediate interfacial restructuring in dry versus hydrated states. Results show that charge, in progressing from nonpolar to cationic to zwitterionic, results in dramatic changes in interfacial structure and overall hydration. While net neutral systems, regardless of bulk phase polarity, show minimal interfacial water structuring, the cationic species exhibits strong bulk water signals from the surface potential. Meanwhile, the polymer brushes themselves restructure in water differently independent of charge, impacting the functional groups that are presented to the aqueous phase. Nonpolar and cationic species for instance undergo a change in alkyl group orientations to accommodate hydrating water molecules, whereas the zwitterionic polymer becomes completely disordered in water. Overall, the structure-based behavior trends presented herein have implications in antifouling applications and responsive material interfaces.

biointerface↗
DOE OSTI2023

Fabrication-robust silicon photonic devices in standard sub-micron silicon-on-insulator processes

Perturbations to the effective refractive index from nanometer-scale fabrication variations in waveguide geometry plague high index-contrast photonic platforms; this includes the ubiquitous sub-micron silicon-on-insulator (SOI) process. Such variations are particularly troublesome for phase-sensitive devices, such as interferometers and resonators, which exhibit drastic changes in performance as a result of these fabrication-induced phase errors. In this Letter, we propose and experimentally demonstrate a design methodology for dramatically reducing device sensitivity to silicon width variations. We apply this methodology to a highly phase-sensitive device, the ring-assisted Mach–Zehnder interferometer (RAMZI), and show comparable performance and footprint to state-of-the-art devices, while substantially reducing stochastic phase errors from etch variations. This decrease in sensitivity is directly realized as energy savings by significantly reducing the required corrective thermal tuning power, providing a promising path toward ultra-energy-efficient large-scale silicon photonic circuits.

Rizzo, Anthony (ORCID:000000034752797X)↗
DOE OSTI2020

Structural and electronic switching of a single crystal 2D metal-organic framework prepared by chemical vapor deposition

The incorporation of metal-organic frameworks into advanced devices remains a desirable goal, but progress is hindered by difficulties in preparing large crystalline metal-organic framework films with suitable electronic performance. We demonstrate the direct growth of large-area, high quality, and phase pure single metal-organic framework crystals through chemical vapor deposition of a dimolybdenum paddlewheel precursor, Mo 2 (INA) 4 . These exceptionally uniform, high quality crystals cover areas up to 8600 µm 2 and can be grown down to thicknesses of 30 nm. Moreover, scanning tunneling microscopy indicates that the Mo 2 (INA) 4 clusters assemble into a two-dimensional, single-layer framework. Devices are readily fabricated from single vapor-phase grown crystals and exhibit reversible 8-fold changes in conductivity upon illumination at modest powers. Moreover, we identify vapor-induced single crystal transitions that are reversible and responsible for 30-fold changes in conductivity of the metal-organic framework as monitored by in situ device measurements. Gas-phase methods, including chemical vapor deposition, show broader promise for the preparation of high-quality molecular frameworks, and may enable their integration into devices, including detectors and actuators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Null geodesics and thermodynamic phase transition of four-dimensional Gauss–Bonnet AdS black hole

Highlights: • Modified gravity theories. • Null geodesics and the thermodynamic phase transition. • Four-dimensional Gauss–Bonnet AdS black hole. • Correlation between gravity and thermodynamics. Modified gravity theories are of great interest in both observational and theoretical studies. In this article, we study the correlation between the null geodesics and the thermodynamic phase transition of a four-dimensional Gauss–Bonnet AdS black hole. Firstly, we study the phase structure of the black hole, using the coexistence and spinodal curves, to understand the phase transition in an extended phase space. The imprints of these phase transition features can be clearly observed from the functional dependence of photon orbit radius and minimum impact parameter with respect to the Hawking temperature and pressure. The change in these two quantities during the phase transition serve as order parameters which characterise the critical behaviour. The correlation shows that thermodynamic phase transition can be studied by observing the effects of strong gravitational field on the photon orbit and vice versa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Unraveling the nature of Fe-doping mediated inter- and intra-chain interactions in Ca 3 Co 2 O 6

The structural and magnetic properties of quasi-one-dimensional (1D) spin-chain compounds Ca 3 Co 2-x Fe x O 6 (x = 0, 0.1, 0.2 and 0.3) synthesized by a sol-gel method have been systematically studied by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), neutron powder diffraction (NPD), dc and ac magnetization measurements. The samples adopt a rhombohedral crystal structure with the space group R-3c in a temperature range of 5–100 K. Fe ions are found to locate at the trigonal prism Co2 crystallographic sites. Fe doping converts some of low-spin Co 3+ ions at Co1 octahedral sites into Co 2+ ions. For the high-temperature paramagnetic phase, the Curie paramagnetic temperature θp changes its sign from positive to negative at x = 0.2, implying that the dominant magnetic interaction is driven from ferromagnetic (FM) to antiferromagnetic (AFM) upon Fe substitution. A partial low-spin to high-spin state crossover of the Co1 ions is observed at high Fe-doping level x = 0.3. All the samples exhibit a long-range spin-density wave (SDW) AFM ordering below TN, followed by a spin-glass-like transition at Tf. These low-temperature magnetic phases were significantly suppressed upon Fe doping. The Fe substitution in Ca 3 Co 2-x Fe x O 6 weakened both intrachain and interchain magnetic interactions, caused by enhanced magnetic disorder due to the different magnetic characters of Ising Co and Heisenberg Fe spins.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of Sucrose on Phase Transitions of Organic/Inorganic Aerosols

Aerosol morphology influences the interactions of particles with light, water uptake, and heterogeneous chemistry. Through these mechanisms, morphology may be important to the role of aerosol particles on the climate system. A factor that impacts morphology is the diverse and complex mixture of organic compounds that make up the aerosol particles in the atmosphere. In this paper, we investigate the effect of sucrose on liquid-liquid phase separation. As the amount of sucrose is increased, the oxygen to carbon ratio (O:C) of the particles increases. We demonstrate that the morphology of the particle changes as O:C is increased with phase separation causing the particle to take on a textured appearance due to large or small inclusions, as opposed to a core-shell particle. As a result of the increased O:C ratio, the separation relative humidity (SRH) of the particles decreases and, in all cases, the SRH can be completely arrested with the addition of a sufficiently large concentration of sucrose. The quantity of sucrose required to arrest phase separation of the particles shows a direct correlation with the SRH of the system without sucrose. The identity of the salt further impacts the amount of sucrose required to arrest phase separation and is controlled more strongly by the identity of the anion. When the mixture contains an organic/inorganic combination that is strongly phase separating, phase separation is observed at an O:C of 0.92 which is a higher O:C value than previously shown (O:C > 0.8). Sucrose is compared with several other high O:C compounds to confirm the influence of the average O:C ratio. In all, these effects could drastically influence aerosol processes in the climate system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Regional environmental controllers influence continental scale soil carbon stocks and future carbon dynamics

Abstract Understanding the influence of environmental factors on soil organic carbon (SOC) is critical for quantifying and reducing the uncertainty in carbon climate feedback projections under changing environmental conditions. We explored the effect of climatic variables, land cover types, topographic attributes, soil types and bedrock geology on SOC stocks of top 1 m depth across conterminous United States (US) ecoregions. Using 4559 soil profile observations and high-resolution data of environmental factors, we identified dominant environmental controllers of SOC stocks in 21 US ecoregions using geographically weighted regression. We used projected climatic data of SSP126 and SSP585 scenarios from GFDL-ESM 4 Earth System Model of Coupled Model Intercomparison Project phase 6 to predict SOC stock changes across continental US between 2030 and 2100. Both baseline and predicted changes in SOC stocks were compared with SOC stocks represented in GFDL-ESM4 projections. Among 56 environmental predictors, we found 12 as dominant controllers across all ecoregions. The adjusted geospatial model with the 12 environmental controllers showed an R 2 of 0.48 in testing dataset. Higher precipitation and lower temperatures were associated with higher levels of SOC stocks in majority of ecoregions. Changes in land cover types (vegetation properties) was important in drier ecosystem as North American deserts, whereas soil types and topography were more important in American prairies. Wetlands of the Everglades was highly sensitive to projected temperature changes. The SOC stocks did not change under SSP126 until 2100, however SOC stocks decreased up to 21% under SSP585. Our results, based on environmental controllers of SOC stocks, help to predict impacts of changing environmental conditions on SOC stocks more reliably and may reduce uncertainties found in both, geospatial and Earth System Models. In addition, the description of different environmental controllers for US ecoregions can help to describe the scope and importance of global and local models.

58 GEOSCIENCES↗
DOE OSTI2020

Observed metallization of hydrogen interpreted as a band structure effect

A recent experimental study of the metallization of hydrogen tracked the direct band gap and vibron frequency via infrared measurements up to ~425 GPa (Loubeyre et al (2020 Nature 577 631). Above this pressure, the direct gap has a discontinuous drop to below the minimum experimentally accessible energy (~0.1 eV). The authors suggested that this observation is caused by a structural phase transition between the C2/c-24 molecular phase to another molecular phase such as Cmca-12. Here, through ab initio calculations of pressure dependent vibron frequency and direct band gap, we find that the experimental data is consistent with the C2/c-24 phase up to 425 GPa, and suggest that this consistency extends beyond that pressure. Specifically, we find that qualitative changes in the band structure of the C2/c-24 phase lead to a discontinuous drop of the direct band gap, which can explain the observed drop without a structural transition. In conclusion, this alternative scenario, which naturally explains the absence of hysteresis in the measurements, will hopefully motivate further experimental studies to ascertain the structure of the phase above the high pressure 'phase transition'.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Nature of the ferromagnetic-antiferromagnetic transition in Y 1- x La x TiO 3

In this work, we explore the magnetically ordered ground state of the isovalently substituted Mott insulator Y 1- x La x TiO 3 for x≤ 0.3 via single-crystal growth, magnetometry, neutron diffraction, x-ray magnetic circular dichroism, muon spin rotation, and small-angle neutron scattering (SANS). We find that the decrease in the magnetic transition temperature on approaching the ferromagnetic-antiferromagnetic phase boundary at the La concentration xc ≈ 0.3 is accompanied by a strong suppression of both bulk and local ordered magnetic moments, along with a volume wise separation into magnetically ordered and paramagnetic regions. The thermal phase transition does not show conventional second-order behavior since neither a clear signature of dynamic critical behavior nor a power-law divergence of the magnetic correlation length is found for the studied substitution range; this finding becomes increasingly obvious with increasing La substitution. We find no evidence for a spin-glass phase. Finally, from SANS and magnetometry measurements, we discern a crossover from easy-axis to easy-plane magnetocrystalline anisotropy with increasing La substitution. These results indicate complex changes in magnetic structure upon approaching the phase boundary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Quantum oscillations and transport properties of layered single-crystal SrCu 4 ⁢As 2

Here, we report a systematic investigation of the physical properties and Fermi-surface topology of layered single-crystal SrCu 4⁢ As 2 using electrical transport, magnetotransport, and quantum-oscillation experiments plus band-structure calculations. The temperature-dependent electrical resistivity reveals a hysteretic phase transition at 𝑇 𝑃 =59 K, most likely associated with a structural change. Hall resistivity data suggest a marked change in the average hole density resulting from the latter phase transition near 𝑇 𝑃 . A large, linear, and nonsaturating magnetoresistance is observed at low temperatures in SrCu 4 ⁢As 2 , likely attributable to the multipocket Fermi surface. Quantum-oscillation data measured in magnetic fields of up to 60 T show several oscillation frequencies exhibiting low effective masses, indicating the presence of Dirac-like band dispersion in SrCu 4 ⁢As 2 , as suggested by the band structure calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

An Extratropical Pathway for the Madden–Julian Oscillation’s Influence on North Atlantic Tropical Cyclones

Abstract This study investigates the combined impacts of the Madden–Julian oscillation (MJO) and extratropical anticyclonic Rossby wave breaking (AWB) on subseasonal Atlantic tropical cyclone (TC) activity and their physical connections. Our results show that during MJO phases 2–3 (enhanced Indian Ocean convection) and 6–7 (enhanced tropical Pacific convection), there are significant changes in basinwide TC activity. The MJO and AWB collaborate to suppress basinwide TC activity during phases 6–7 but not during phases 2–3. During phases 6–7, when AWB occurs, various TC metrics including hurricanes, accumulated cyclone energy, and rapid intensification probability decrease by ∼50%–80%. Simultaneously, large-scale environmental variables, like vertical wind shear, precipitable water, and sea surface temperatures become extremely unfavorable for TC formation and intensification, compared to periods characterized by suppressed AWB activity during the same MJO phases. Further investigation reveals that AWB events during phases 6–7 occur in concert with the development of a stronger anticyclone in the lower troposphere, which transports more dry, stable extratropical air equatorward, and drives enhanced tropical SST cooling. As a result, individual AWB events in phases 6–7 can disturb the development of surrounding TCs to a greater extent than their phases 2–3 counterparts. The influence of the MJO on AWB over the western subtropical Atlantic can be attributed to the modulation of the convectively forced Rossby wave source over the tropical eastern Pacific. A significant number of Rossby waves initiating from this region during phases 5–6 propagate into the subtropical North Atlantic, preceding the occurrence of AWB events in phases 6–7.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Radiation effects in Mn+1AXn phases

M n+1 AX n phases exhibit unique laminated atomic structures that result in properties typical of both ceramics and metals. Due to their unusual characteristics, these materials have been proposed for use in a wide variety of industrial applications, including in nuclear reactors—both fission and fusion systems—where they will be exposed to extreme irradiation conditions and high temperatures. Recently, numerous studies have investigated radiation effects on the M n+1 AX n phases, revealing complex behavior—phase transformations, surface modification, and mechanical property changes—induced by ion or neutron irradiation over a range of temperatures. This review summarizes recent experimental and theoretical work on the response of the M n+1 AX n phases to irradiation and discusses the intrinsic controls on the radiation tolerance of these materials. Based on the review of the present body of work, a comprehensive understanding of the mechanisms of irradiation-induced structural modification and defect evolution in M n+1 AX n phases is developed, as well as proposed strategies for designing novel M n+1 AX n phases with enhanced performance under extreme irradiation conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Projected Changes in Temperature and Precipitation Over the United States, Central America, and the Caribbean in CMIP6 GCMs

The Coupled Model Intercomparison Project Phase 6 (CMIP6) dataset is used to examine projected changes in temperature and precipitation over the United States (U.S.), Central America and the Caribbean. The changes are computed using an ensemble of 31 models for three future time slices (2021–2040, 2041–2060, and 2080–2099) relative to the reference period (1995–2014) under three Shared Socioeconomic Pathways (SSPs; SSP1-2.6, SSP2-4.5, and SSP5-8.5). The CMIP6 ensemble reproduces the observed annual cycle and distribution of mean annual temperature and precipitation with biases between – 0.93 and 1.27 °C and – 37.90 to 58.45%, respectively, for most of the region. However, modeled precipitation is too large over the western and Midwestern U.S. during winter and spring and over the North American monsoon region in summer, while too small over southern Central America. Temperature is projected to increase over the entire domain under all three SSPs, by as much as 6 °C under SSP5-8.5, and with more pronounced increases in the northern latitudes over the regions that receive snow in the present climate. Annual precipitation projections for the end of the twenty-first century have more uncertainty, as expected, and exhibit a meridional dipole-like pattern, with precipitation increasing by 10–30% over much of the U.S. and decreasing by 10–40% over Central America and the Caribbean, especially over the monsoon region. Seasonally, precipitation over the eastern and central subregions is projected to increase during winter and spring and decrease during summer and autumn. Over the monsoon region and Central America, precipitation is projected to decrease in all seasons except autumn. The analysis was repeated on a subset of 9 models with the best performance in the reference period; however, no significant difference was found, suggesting that model bias is not strongly influencing the projections.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Modeling the Effect of Hydrogen on Tungsten Grain Boundary Properties

The objective of this study is to assess the effect of hydrogen isotopes on mechanical properties of tungsten that are relevant to first-wall applications in a tokamak. We focus on the effects of hydrogen segregation to grain boundaries and its impact on the grain boundary structure and properties. Through molecular dynamics and other atomistic techniques, we are able to make predictions of grain boundary structure and properties related to it, including grain boundary mobility and impurity diffusivity along the grain boundary. The grain boundary structure can change significantly and abruptly as conditions change, including due to heating and radiation damage. These grain boundary phase transformations can have a pronounced effect on mobility and impurity diffusivity, even when no hydrogen is present. How this behavior changes in the presence of hydrogen is not known. The phase may affect the level of hydrogen segregation and hydrogen storage, and the hydrogen may induce significant grain boundary structure changes. Our objective is to predict whether they do. The results inform thermomechanical modeling of tungsten at tokamak conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Causes of Reduced Climate Sensitivity in E3SM From Version 1 to Version 2

The effective climate sensitivity in the Department of Energy's Energy Exascale Earth System Model (E3SM) has decreased from 5.3 K in version 1 to 4.0 K in version 2. This reduction is mainly due to a weaker positive cloud feedback that leads to a stronger negative radiative feedback. Present-day atmosphere-only experiments with uniform 4 K sea surface temperature warming are used to separate the contributions of individual model modifications to the reduced cloud feedback. We find that the reduced cloud feedback is mostly driven by changes over the tropical marine low cloud regime, mainly related to a new trigger function for the deep convection scheme and modifications in the cloud microphysics scheme. The new trigger function helps weaken the low cloud reduction by increasing the cloud water detrainment at low levels from deep convection under warming. Changes to the formula of autoconversion rate from liquid to rain and an introduced minimum cloud droplet number concentration threshold in cloud microphysical calculations help sustain clouds against dissipation by suppressing precipitation generation with warming. In the midlatitudes, the increased Wegener-Bergeron-Findeisen (WBF) efficiency strongly reduces present-day liquid water and leads to a stronger negative cloud optical depth feedback. The reduced trade cumulus cloud feedback in v2 is closer to estimates from recent observational and large-eddy modeling studies but might not be due to the right physical reasons. The reduced mid-latitude cloud feedback may be more plausible because more realistic present-day mixed-phase clouds are produced through the change in the WBF efficiency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Enhanced magnetocaloric effects in metastable phases of Mn 1- x Co x NiGe generated through thermal quenching and high-pressure annealing

Metastable phases were formed in Mn 1-x Co x NiGe (x = 0.05 and 0.08) by annealing at 800 °C followed by rapid cooling, i.e., quenching, at ambient pressure (P = 0) and under a pressure of P = 3.5 GPa, and their phase transitions and associated magnetocaloric properties were investigated. The crystal cell volumes of the metastable phases decreased, and their structural transitions significantly shifted to lower temperatures relative to those of the slow-cooled compounds, with a greater reduction observed in the samples where the rapid cooling occurred under high pressures. The magnetic and structural transitions coupled to form a magnetostructural transition in the metastable phases, resulting in large magnetic entropy changes up to -79.6 J kg -1 K -1 (x = 0.08 ) for a 7-T field change. As a result, the experimental results demonstrate thermal quenching and high-pressure annealing as alternative methods to create magnetostructural transitions, without modifying the compositions of the materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗