Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter Identifiability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Sub-nanosecond signal propagation in anisotropy-engineered nanomagnetic logic chains

Energy efficient nanomagnetic logic (NML) computing architectures propagate binary information by relying on dipolar field coupling to reorient closely spaced nanoscale magnets. In the past, signal propagation in nanomagnet chains were characterized by static magnetic imaging experiments; however, the mechanisms that determine the final state and their reproducibility over millions of cycles in high-speed operation have yet to be experimentally investigated. Here we present a study of NML operation in a high-speed regime. We perform direct imaging of digital signal propagation in permalloy nanomagnet chains with varying degrees of shape-engineered biaxial anisotropy using full-field magnetic X-ray transmission microscopy and time-resolved photoemission electron microscopy after applying nanosecond magnetic field pulses. Moreover, an intrinsic switching time of 100 ps per magnet is observed. In conclusion these experiments, and accompanying macrospin and micromagnetic simulations, reveal the underlying physics of NML architectures repetitively operated on nanosecond timescales and identify relevant engineering parameters to optimize performance and reliability.

97 MATHEMATICS AND COMPUTING↗

Formation pathways of mesoporous silica nanoparticles with dodecagonal tiling

Considerable progress in the fabrication of quasicrystals demonstrates that they can be realized in a broad range of materials. However, the development of chemistries enabling direct experimental observation of early quasicrystal growth pathways remains challenging. Here, we report the synthesis of four surfactant-directed mesoporous silica nanoparticle structures, including dodecagonal quasicrystalline nanoparticles, as a function of micelle pore expander concentration or stirring rate. We demonstrate that the early formation stages of dodecagonal quasicrystalline mesoporous silica nanoparticles can be preserved, where precise control of mesoporous silica nanoparticle size down to <30 nm facilitates comparison between mesoporous silica nanoparticles and simulated single-particle growth trajectories beginning with a single tiling unit. Our results reveal details of the building block size distributions during early growth and how they promote quasicrystal formation. This work identifies simple synthetic parameters, such as stirring rate, that may be exploited to design other quasicrystal-forming self-assembly chemistries and processes.

36 MATERIALS SCIENCE↗

Higher-order factorization machine for accurate surrogate modeling in material design

Efficient and robust optimization is important in material science for identifying optimal structural parameters and enhancing material performance. Surrogate-based active learning algorithms have recently gained great attention for their ability to efficiently navigate large, high-dimensional design spaces. Among surrogate models, 2 nd -order factorization machine (FM) models are widely employed as the surrogate model in active learning algorithms due to their balance between simplicity and effectiveness. However, their quadratic nature limits their capacity to capture complex, higher-order interactions among variables, often leading to suboptimal solutions. To overcome this limitation, we propose an active learning scheme integrating a 3 rd -order FM model, capable of modeling three-variable interactions and more intricate relationships in material systems. We comprehensively evaluate the surrogate modeling performance of the 3 rd -order FM case using various objective functions. Furthermore, we examine the optimization reliability and efficiency of the 3 rd -order FM-based active learning in a real-world material design task (e.g., nanophotonic structures for transparent radiative cooling). Our study shows that the 3 rd -order FM outperforms the 2 nd -order model in both surrogate accuracy and optimization performance, highlighting higher-order models’ promises for material design and optimization problems.

Factorization machine↗

Bayesian stability and force modeling for uncertain machining processes

Accurately simulating machining operations requires knowledge of the cutting force model and system frequency response. However, this data is collected using specialized instruments in an ex-situ manner. Bayesian statistical methods instead learn the system parameters using cutting test data, but to date, these approaches have only considered milling stability. This paper presents a physics-based Bayesian framework which incorporates both spindle power and milling stability. Initial probabilistic descriptions of the system parameters are propagated through a set of physics functions to form probabilistic predictions about the milling process. The system parameters are then updated using automatically selected cutting tests to reduce parameter uncertainty and identify more productive cutting conditions, where spindle power measurements are used to learn the cutting force model. The framework is demonstrated through both numerical and experimental case studies. Results show that the approach accurately identifies both the system natural frequency and cutting force model.

42 ENGINEERING↗

Complete catalog of ground-state diagrams for the general three-state lattice-gas model with nearest-neighbor interactions on a square lattice

Here, the ground states of the general three-state lattice-gas (equivalently, S = 1 Ising) model with nearest-neighbor interactions on a square lattice are explored in the full, five-dimensional parameter space of three interaction constants and two generalized chemical potentials or fields. The complete catalog of fifteen topologically different ground-state diagrams (zero-temperature phase diagrams), which show the regions of stability of the different ground states in the full parameter space of the model, is obtained and discussed in both lattice-gas and Ising-spin language. The results extend those of a recent study in a reduced parameter space, which identified six topologically different ground-state diagrams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hard superellipse phases: particle shape anisotropy & curvature

In this work, we report computer simulations of two-dimensional convex hard superellipse particle phases vs. particle shape parameters including aspect ratio, corner curvature, and sidewall curvature. Shapes investigated include disks, ellipses, squares, rectangles, and rhombuses, as well as, shapes with non-uniform curvature including rounded squares, rounded rectangles, and rounded rhombuses. Using measures of orientational order, order parameters, and a novel stretched bond orientational order parameter, we systematically identify particle shape properties that determine liquid crystal and crystalline phases including their coarse boundaries and symmetry. We observe phases including isotropic, nematic, tetratic, plastic crystals, square crystals, and hexagonal crystals (including stretched variants). Our results catalog known benchmark shapes, but include new shapes that also interpolate between known shapes. Our results indicate design rules for particle shapes that determine two-dimensional liquid, liquid crystalline, and crystalline microstructures that can be realized via particle assembly.

42 ENGINEERING↗

Field emission from vertically aligned few-layer graphene

The electric field emission behavior of vertically aligned few-layer graphene was studied in a parallel plate-type setup. Few-layer graphene was synthesized in the absence of any metallic catalyst by microwave plasma enhanced chemical vapor deposition with gas mixtures of methane and hydrogen. The deposit consists of nanostructures that are several micrometers wide, highly crystalline stacks of four to six atomic layers of graphene, aligned vertically to the substrate surface in a high density network. The few-layer graphene is found to be a good field emitter, characterized by turn-on fields as low as 1 V/{mu}m and field amplification factors up to several thousands. We observe a clear dependence of the few-layer graphene field emission behavior on the synthesis parameters: Hydrogen is identified as an efficient etchant to improve field emission, and samples grown on titanium show lower turn-on field values and higher amplification factors when compared to samples grown on silicon.

36 MATERIALS SCIENCE↗

The effect of a magnetic field on a cylindrical object in a plasma

A two fluid model is applied to the presheath of a cylindrical object immersed in plasma under the influence of an axial magnetic field. The impact of the magnetic field on presheath behavior is studied and quantified by calculating the sheath edge potential and floating potential of the object. The latter is of great interest since it determines the cylinder's charge. It is found that the density distribution in the presheath deviates significantly from the Boltzmann relation for electrons due to the presence of the magnetic field. This occurs because B opposes the radial flow of charge. However, the field not only inhibits transport of charge to the cylinder, but also deflects both fluids, setting up currents in the system, which increase the externally applied field. This effect can alter the field topology around the object significantly and makes it necessary to solve for the magnetic field self-consistently in some situations. The relevant parameter range is identified and a sample calculation with nonuniform B is shown. Interestingly, the magnetic field contribution due to the cylinder adds to the applied field, such that the object behaves as if it were ferromagnetic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of zonal flows in trapped electron mode turbulence through nonlinear gyrokinetic particle and continuum simulation

Trapped electron mode (TEM) turbulence exhibits a rich variety of collisional and zonal flow physics. This work explores the parametric variation of zonal flows and underlying mechanisms through a series of linear and nonlinear gyrokinetic simulations, using both particle-in-cell and continuum methods. A new stability diagram for electron modes is presented, identifying a critical boundary at {eta}{sub e}=1, separating long and short wavelength TEMs. A novel parity test is used to separate TEMs from electron temperature gradient driven modes. A nonlinear scan of {eta}{sub e} reveals fine scale structure for {eta}{sub e} > or approx. 1, consistent with linear expectation. For {eta}{sub e}<1, zonal flows are the dominant saturation mechanism, and TEM transport is insensitive to {eta}{sub e}. For {eta}{sub e}>1, zonal flows are weak, and TEM transport falls inversely with a power law in {eta}{sub e}. The role of zonal flows appears to be connected to linear stability properties. Particle and continuum methods are compared in detail over a range of {eta}{sub e}=d ln T{sub e}/d ln n{sub e} values from zero to five. Linear growth rate spectra, transport fluxes, fluctuation wavelength spectra, zonal flow shearing spectra, and correlation lengths and times are in close agreement. In addition to identifying the critical parameter {eta}{sub e} for TEM zonal flows, this paper takes a challenging step in code verification, directly comparing very different methods of simulating simultaneous kinetic electron and ion dynamics in TEM turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bridge Testing With Ground-Based Interferometric Radar: Experimental Results

The research of innovative non-contact techniques aimed at the vibration measurement of civil engineering structures (also for damage detection and structural health monitoring) is continuously directed to the optimization of measures and methods. Ground-Based Radar Interferometry (GBRI) represents the more recent technique available for static and dynamic control of structures and ground movements.Dynamic testing of bridges and buildings in operational conditions are currently performed: (a) to assess the conformity of the structure to the project design at the end of construction; (b) to identify the modal parameters (i.e. natural frequencies, mode shapes and damping ratios) and to check the variation of any modal parameters over the years; (c) to evaluate the amplitude of the structural response to special load conditions (i.e. strong winds, earthquakes, heavy railway or roadway loads). If such tests are carried out by using a non-contact technique (like GBRI), the classical issues of contact sensors (like accelerometers) are easily overtaken.This paper presents and discusses the results of various tests carried out on full-scale bridges by using a Stepped Frequency-Continuous Wave radar system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Regimes for experimental tests of kinetic effects in dust acoustic waves

The low frequency responses of a kinetic model of dusty plasma, taking into account the absorption of the plasma particles on the dust particles and fluctuations of dust charge, are evaluated numerically in order to identify realistic experimental parameter regimes where charging effects are dominant. A range of parameters in terms of dust number density and size as well as plasma densities, where significant differences with the multicomponent approach can be found, is proposed. General expressions for the imaginary parts of the low frequency responses are derived and numerical results for the damping rate in the corresponding ranges are provided to ensure that observations of dust-acoustic waves in those conditions are plausible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coherent femtosecond low-energy single-electron pulses for time-resolved diffraction and imaging: A numerical study

We numerically investigate the properties of coherent femtosecond single electron wave packets photoemitted from nanotips in view of their application in ultrafast electron diffraction and non-destructive imaging with low-energy electrons. For two different geometries, we analyze the temporal and spatial broadening during propagation from the needle emitter to an anode, identifying the experimental parameters and challenges for realizing femtosecond time resolution. The simple tip-anode geometry is most versatile and allows for electron pulses of several ten of femtosecond duration using a very compact experimental design, however, providing very limited control over the electron beam collimation. A more sophisticated geometry comprising a suppressor-extractor electrostatic unit and a lens, similar to typical field emission electron microscope optics, is also investigated, allowing full control over the beam parameters. Using such a design, we find {approx}230 fs pulses feasible in a focused electron beam. The main limitation to achieve sub-hundred femtosecond time resolution is the typical size of such a device, and we suggest the implementation of more compact electron optics for optimal performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Controlled nanostructuration of polycrystalline tungsten thin films

Nanostructured tungsten thin films have been obtained by ion beam sputtering technique stopping periodically the growing. The total thickness was maintained constant while nanostructure control was obtained using different stopping periods in order to induce film stratification. The effect of tungsten sublayers' thicknesses on film composition, residual stresses, and crystalline texture evolution has been established. Our study reveals that tungsten crystallizes in both stable {alpha}- and metastable {beta}-phases and that volume proportions evolve with deposited sublayers' thicknesses. {alpha}-W phase shows original fiber texture development with two major preferential crystallographic orientations, namely, {alpha}-W<110> and unexpectedly {alpha}-W<111> texture components. The partial pressure of oxygen and presence of carbon have been identified as critical parameters for the growth of metastable {beta}-W phase. Moreover, the texture development of {alpha}-W phase with two texture components is shown to be the result of a competition between crystallographic planes energy minimization and crystallographic orientation channeling effect maximization. Controlled grain size can be achieved for the {alpha}-W phase structure over 3 nm stratification step. Below, the {beta}-W phase structure becomes predominant.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen at zinc vacancy of ZnO: An EPR and ESEEM study

An electron paramagnetic resonance (EPR) spectrum, labeled S1, with small-splitting doublet accompanied by weak satellites is observed in ZnO irradiated with 2 MeV electrons. The obtained structure is shown to be the hyperfine structure due to the dipolar interaction between an unpaired electron spin and a nuclear spin of hydrogen (H). The observation of the nuclear Zeeman frequency of H in electron spin echo envelope modulation experiments further confirmed the presence of a hydrogen atom in S1. From the observed spin-Hamiltonian parameters, S1 is identified to be the partly H-passivated Zn vacancy, V{sub Zn}{sup −}H{sup +}, with the H{sup +} ion making a short O-H bond with only one nearest O neighbor of V{sub Zn} in the basal plane, being off the substitutional site, while the unpaired electron spin, which gives rise to the observed EPR signal, is localized on the p orbital of another O neighbor also in the basal plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modelling morphology evolution during solidification of IPP in processing conditions

During polymer processing, crystallization takes place during or soon after flow. In most of cases, the flow field dramatically influences both the crystallization kinetics and the crystal morphology. On their turn, crystallinity and morphology affect product properties. Consequently, in the last decade, researchers tried to identify the main parameters determining crystallinity and morphology evolution during solidification In processing conditions. In this work, we present an approach to model flow-induced crystallization with the aim of predicting the morphology after processing. The approach is based on: interpretation of the FIC as the effect of molecular stretch on the thermodynamic crystallization temperature; modeling the molecular stretch evolution by means of a model simple and easy to be implemented in polymer processing simulation codes; identification of the effect of flow on nucleation density and spherulites growth rate by means of simple experiments; determination of the condition under which fibers form instead of spherulites. Model predictions reproduce most of the features of final morphology observed in the samples after solidification.

36 MATERIALS SCIENCE↗

Spin-Hall nano-oscillator: A micromagnetic study

This Letter studies the dynamical behavior of spin-Hall nanoscillators from a micromagnetic point of view. The model parameters have been identified by reproducing recent experimental data quantitatively. Our results indicate that a strongly localized mode is observed for in-plane bias fields such as in the experiments, while predict the excitation of an asymmetric propagating mode for large enough out-of plane bias field similarly to what observed in spin-torque nanocontact oscillators. Our findings show that spin-Hall nanoscillators can find application as spin-wave emitters for magnonic applications where spin waves are used for transmission and processing information on nanoscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reduction of scattering using thin all-dielectric shells designed by stochastic optimizer

Adaptive differential evolution method has been used for optimization of all-dielectric multilayer coatings in order to reduce total scattering from spherical targets. The optimal refractive index profiles have been found for various sizes of targets and thicknesses of coatings. Few profile types that appear to be optimal for various geometrical parameters have been identified. Scattering of the target with diameter of 0.75 λ has been reduced by 85% using 0.16 λ thick coating formed by isotropic dielectric materials. For larger targets, scattering reduction becomes smaller, but it still reaches 50% for targets with the diameter of 1.5 λ. The obtained designs provide a route to implement cloaking without the use of magnetic and anisotropic metamaterials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical tailoring of linear response from plasmonic nano-resonators grown on a layer of polystyrene spheres

We developed a geometrical method to reproduce the morphology of hybrid structures composed by self-ordered dielectric nanospheres covered by anisotropic plasmonic structures. Numerical analysis allowed to investigate the optical response of the considered system, and to identify the relevant parameters to achieve efficient and versatile light manipulation. In particular, we show that the overall structure, acting as a hybrid plasmonic-photonics meta-surface, can be engineered in order to maximize its linear and circular dichroic behavior at optical frequencies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗