Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Investigation of CO 2 capture using solid sorbents in a fluidized bed reactor: Cold flow hydrodynamics

Both experimental tests and numerical simulations were conducted to investigate the fluidization behavior of a solid CO 2 sorbent with a mean diameter of 100 μm and density of about 480 kg/m, which belongs to Geldart's Group A powder. A carefully designed fluidized bed facility was used to perform a series of experimental tests to study the flow hydrodynamics. Numerical simulations using the two-fluid model indicated that the grid resolution has a significant impact on the bed expansion and bubbling flow behavior. Due to the limited computational resource, no good grid independent results were achieved using the standard models as far as the bed expansion is concerned. In addition, all simulations tended to under-predict the bubble size substantially. Effects of various model settings including both numerical and physical parameters have been investigated with no significant improvement observed. The latest filtered sub-grid drag model was then tested in the numerical simulations. Compared to the standard drag model, the filtered drag model with two markers not only predicted reasonable bed expansion but also yielded realistic bubbling behavior. As a result, a grid sensitivity study was conducted for the filtered sub-grid model and its applicability and limitation were discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Non-destructive quantification of alignment of nanorods embedded in uniaxially stretched polymer films

Among several methods developed for uniaxial alignment of metallic nanorods for optical applications, alignment by film stretching consists in embedding the rods in a transparent thin film of thermoplastic polymer, followed by simultaneous heating and uniaxial stretching of the composite film. As to the quantification of the resulting alignment, it has been limited to statistical calculations based on microscopic examination, which is incomplete, subject to errors due to geometric distortions of the scanning electron microscope images and destructive, since it involves cutting of samples. In contrast, we present in this paper a non-destructive quantification of the average orientation of the rods, based on a probabilistic approach combined with numerical simulations of absorbance spectra and spectrometric characterization of the composite film. Assuming electromagnetically non-interacting rods, we consider the longitudinal absorbance peak of their ensemble to consist of the superposition of their individual spectra that we obtain by numerical simulation using the size and shape adapted dielectric function of the metal and the finite difference time domain method. The accuracy of the solution depends on the number of discretization intervals, the accuracy of the numerical simulations, and the accurate knowledge of the polydispersity of the rods. For the sake of concreteness, we used nanorods to describe the quantification steps but the method is equally valid for any dichroic particles.

36 MATERIALS SCIENCE↗

Multi-fidelity modeling to predict the rheological properties of a suspension of fibers using neural networks and Gaussian processes

Unveiling the rheological properties of fiber suspensions is of paramount interest to many industrial applications. There are multiple factors, such as fiber aspect ratio and volume fraction, that play a significant role in altering the rheological behavior of suspensions. Three-dimensional (3D) numerical simulations of coupled differential equations of the suspension of fibers are computationally expensive and time-consuming. Machine learning algorithms can be trained on the available data and make predictions for the cases where no numerical data are available. However, some widely used machine learning surrogates, such as neural networks, require a relatively large training dataset to produce accurate predictions. Multi-fidelity models, which combine high-fidelity data from numerical simulations and less expensive lower fidelity data from resources such as simplified constitutive equations, can pave the way for more accurate predictions. Here, we focus on neural networks and the Gaussian processes with two levels of fidelity, i.e., high and low fidelity networks, to predict the steady-state rheological properties, and compare them to the single-fidelity network. High-fidelity data are obtained from direct numerical simulations based on an immersed boundary method to couple the fluid and solid motion. The low-fidelity data are produced by using constitutive equations. Multiple neural networks and the Gaussian process structures are used for the hyperparameter tuning purpose. Results indicate that with the best choice of hyperparameters, both the multi-fidelity Gaussian processes and neural networks are capable of making predictions with a high level of accuracy with neural networks demonstrating marginally better performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In situ coherent diffractive imaging

Coherent diffractive imaging (CDI) has been widely applied in the physical and biological sciences using synchrotron radiation, X-ray free-electron laser, high harmonic generation, electrons, and optical lasers. One of CDI’s important applications is to probe dynamic phenomena with high spatiotemporal resolution. Here, we report the development of a general in situ CDI method for real-time imaging of dynamic processes in solution. By introducing a time-invariant overlapping region as real-space constraint, we simultaneously reconstructed a time series of complex exit wave of dynamic processes with robust and fast convergence. We validated this method using optical laser experiments and numerical simulations with coherent X-rays. Our numerical simulations further indicated that in situ CDI can potentially reduce radiation dose by more than an order of magnitude relative to conventional CDI. With further development, we envision in situ CDI could be applied to probe a range of dynamic phenomena in the future.

47 OTHER INSTRUMENTATION↗

Dynamics of a high-current relativistic electron beam

The dynamics of a high-current relativistic electron beam is studied experimentally and by numerical simulation. The beam is formed in a magnetically insulated diode with a transverse-blade explosive-emission cathode. It is found experimentally that the radius of a 500-keV beam with a current of 2 kA and duration of 500 ns decreases with time during the beam current pulse. The same effect was observed in numerical simulations. This effect is explained by a change in the shape of the cathode plasma during the current pulse, which, according to calculations, leads to a change in the beam parameters, such as the electron pitch angle and the spread over the longitudinal electron momentum. These parameters are hard to measure experimentally; however, the time evolution of the radial profile of the beam current density, which can be measured reliably, coincides with the simulation results. This allows one to expect that the behavior of the other beam parameters also agrees with numerical simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison and investigation of production of specific nuclides by different fission yield data

Generally, passive gamma spectroscopy (PGS) is known as a useful technique for nondestructive measurement of burnup and nuclide production in normal spent nuclear fuel. However, PGS can be used not only for normal spent fuel, but also for molten fuel generated in severe accidents involving core meltdowns. In such cases, it is estimated by the radioactivity ratios of specific nuclides. At the time of the decommissioning of the Three Mile Island's unit 2 reactor, fission products (FPs) such as Cs{sup 134}, Cs{sup 137}, Ce{sup 144}, Eu{sup 154}, Ru{sup 106}, and Sb{sup 125} were concerned. The radioactivity ratios are estimated by numerical simulations. However, there are various uncertainties in numerical simulations. In this study, we evaluated the effect of the difference in fission yield data. We compared the productions of concerned nuclides of Three Mile Island's unit 2 reactor by using Tokyo-tech and JENDL FP Fission Yields Data File 2011(FPY- 2011). Tokyo-tech is newly created by Tsubakihara et al. at Tokyo Institute of Technology. FPY-2011 is currently the latest fission yield data in Japan. In the concerned nuclides, the relative difference (Tokyo-tech/FPY-2011 -1) in the production of Sb{sup 125} is 4.5% and that of Eu{sup 154} is -5.6%. The relative difference in the production of Sb{sup 125} is found to be caused by the difference in the independent yields of Sn{sup 125}, In{sup 125}, Cd{sup 125}, Ag{sup 125}, and Pd{sup 125}. The relative difference in Eu{sup 154} is found to be caused by the relative difference in the production of Sm{sup 152} and the relative difference in the cumulative yield of Eu{sup 153}.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A direct numerical simulation-based investigation and modeling of pressure Hessian effects on compressible velocity gradient dynamics

The pressure Hessian tensor plays a key role in shaping the behavior of the velocity gradient tensor, and in turn, that of many incumbent non-linear processes in a turbulent flow field. In compressible flows, the role of pressure Hessian is even more important because it represents the level of fluid-thermodynamic coupling existing in the flow field. In this work, we first perform a direct numerical simulation-based study to clearly identify, isolate, and understand various important inviscid mechanisms that govern the evolution of the pressure Hessian tensor in compressible turbulence. The ensuing understanding is then employed to introduce major improvements to the existing Lagrangian model of the pressure Hessian tensor (the enhanced Homogenized Euler equation or EHEE) in terms of (i) non-symmetric, non-isentropic effects and (ii) improved representation of the anisotropic portion of the pressure Hessian tensor. Finally, we evaluate the new model extensively by comparing the new model results against known turbulence behavior over a range of Reynolds and Mach numbers. Indeed, the new model shows much improved performance as compared to the EHEE model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental determination of radiated internal wave power without pressure field data

We present a method to determine, using only velocity field data, the time-averaged energy flux (J) and total radiated power P for two-dimensional internal gravity waves. Both (J) and P are determined from expressions involving only a scalar function, the stream function ψ. We test the method using data from a direct numerical simulation for tidal flow of a stratified fluid past a knife edge. The results for the radiated internal wave power given by the stream function method agree to within 0.5% with results obtained using pressure and velocity data from the numerical simulation. The results for the radiated power computed from the stream function agree well with power computed from the velocity and pressure if the starting point for the stream function computation is on a solid boundary, but if a boundary point is not available, care must be taken to choose an appropriate starting point. We also test the stream function method by applying it to laboratory data for tidal flow past a knife edge, and the results are found to agree with the direct numerical simulation. The supplementary material includes a Matlab code with a graphical user interface that can be used to compute the energy flux and power from two-dimensional velocity field data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of numerical and post-Newtonian waveforms for generic precessing black-hole binaries

We compare waveforms and orbital dynamics from the first long-term, fully nonlinear, numerical simulations of a generic black-hole binary configuration with post-Newtonian (PN) predictions. The binary has mass ratio q{approx}0.8 with arbitrarily oriented spins of magnitude S{sub 1}/m{sub 1}{sup 2}{approx}0.6 and S{sub 2}/m{sub 2}{sup 2}{approx}0.4 and orbits 9 times prior to merger. The numerical simulation starts with an initial separation of r{approx_equal}11M and orbital parameters determined by 2.5 PN and 3.5 PN evolutions of a quasi-circular binary starting from r=50M. The resulting binaries have very little eccentricity according to the 2.5 PN and 3.5 PN systems, but show eccentricities of e{approx}0.01-0.02 and e{approx}0.002-0.005 in the respective numerical simulations, thus demonstrating that 3.5 PN significantly reduces the eccentricity of the binary compared to 2.5 PN. We perform three numerical evolutions from r{approx_equal}11M with maximum resolutions of h=M/48, M/53.3, M/59.3, to verify numerical convergence. We observe a reasonably good agreement between the PN and numerical waveforms, with an overlap of nearly 99% for the first six cycles of the (l=2, m={+-}2) modes, 91% for the (l=2, m={+-}1) modes, and nearly 91% for the (l=3, m={+-}3) modes. The phase differences between numerical and post-Newtonian approximations appear to be independent of the (l,m) modes considered and relatively small for the first 3-4 orbits. An advantage of the 3.5 PN model over the 2.5 PN one seems to be observed, which indicates that still higher PN order (perhaps even 4.0 PN) may yield significantly better waveforms. In addition, we identify features in the waveforms likely related to precession and precession-induced eccentricity.

99 GENERAL AND MISCELLANEOUS↗

Multi-fidelity modeling to predict the rheological properties of fiber suspensions

Unveiling the rheological properties of fiber suspensions is of paramount interest to many industrial applications like biofuel production. The 3D numerical simulations of the suspension of fibers are often computationally expensive and time-consuming. Machine learning methods such as neural networks can simplify the prediction of rheological behavior; however, they require a relatively large training data set. Multi -fidelity models, which combine high-fidelity data from numerical simulations and less expensive lower fidelity data from resources such as simplified physical equations, can lead to optimized predictions. Here, we focus on a neural network with two levels of fidelity, i.e., high and low fidelity networks. To produce high-fidelity data, we perform direct numerical simulations to model the fibers as one-dimensional inextensible slender bodies that obey the Euler- Bernoulli beam equation. The Navier-Stokes equations govern the suspended fluid, and an immersed boundary method is used to couple the fluid and solid motion. The low-fidelity data is produced by using constitutive equations. Noticeable improvements have been observed in the accuracy of predicting the rheological behavior when a multi-fidelity network is used compared to the single-fidelity network.

Boodaghidizaji, Miad↗

Potential quantum advantage for simulation of fluid dynamics

Numerical simulation of turbulent fluid dynamics needs to either parametrize turbulence—which introduces large uncertainties—or explicitly resolve the smallest scales—which is prohibitively expensive. Here, we provide evidence through analytic bounds and numerical studies that a potential quantum speedup can be achieved to simulate fluid dynamics using quantum computing. Specifically, we provide a lattice Boltzmann formulation of fluid dynamics for which we give evidence that low-order Carleman linearization is much more accurate than previously believed for these systems. This is achieved via a combination of reformulating the Navier-Stokes nonlinearity (u·$\triangledown$u) to lattice-Boltzmann nonlinearity (u 2 ) and accurately linearizing the dynamical equations, which effectively trades nonlinearity for additional degrees of freedom that add negligible expense in the quantum solver. Based on this, we apply a quantum algorithm for simulating the Carleman-linearized lattice Boltzmann equation and provide evidence that its cost scales logarithmically with system size compared with polynomial scaling in the best known classical algorithms. In this paper, we suggest that a quantum advantage may exist for simulating fluid dynamics, paving the way for simulating nonlinear multiscale transport phenomena in a wide range of disciplines using quantum computing.

42 ENGINEERING↗

ANGULAR MOMENTUM TRANSPORT IN PROTOPLANETARY AND BLACK HOLE ACCRETION DISKS: THE ROLE OF PARASITIC MODES IN THE SATURATION OF MHD TURBULENCE

The magnetorotational instability (MRI) is considered a key process for driving efficient angular momentum transport in astrophysical disks. Understanding its nonlinear saturation constitutes a fundamental problem in modern accretion disk theory. The large dynamical range in physical conditions in accretion disks makes it challenging to address this problem only with numerical simulations. We analyze the concept that (secondary) parasitic instabilities are responsible for the saturation of the MRI. Our approach enables us to explore dissipative regimes that are relevant to astrophysical and laboratory conditions that lie beyond the regime accessible to current numerical simulations. We calculate the spectrum and physical structure of parasitic modes that feed off the fastest, exact (primary) MRI mode when its amplitude is such that the fastest parasitic mode grows as fast as the MRI. We argue that this 'saturation' amplitude provides an estimate of the magnetic field that can be generated by the MRI before the secondary instabilities suppress its growth significantly. Recent works suggest that the saturation amplitude of the MRI depends mainly on the magnetic Prandtl number. Our results suggest that, as long as viscous effects do not dominate the fluid dynamics, the saturation level of the MRI depends only on the Elsasser number {Lambda}{sub {eta}}. We calculate the ratio between the stress and the magnetic energy density, {alpha}{sub sat}{beta}{sub sat}, associated with the primary MRI mode. We find that for {Lambda}{sub {eta}} > 1 Kelvin-Helmholtz modes are responsible for saturation and {alpha}{sub sat}{beta}{sub sat} = 0.4, while for {Lambda}{sub {eta}} < 1 tearing modes prevail and {alpha}{sub sat}{beta}{sub sat} {approx_equal} 0.5 {Lambda}{sub {eta}}. Several features of numerical simulations designed to address the saturation of the MRI in accretion disks surrounding young stars and compact objects can be interpreted in terms of our findings.

79 ASTRONOMY AND ASTROPHYSICS↗

CHARACTERIZING MAGNETOHYDRODYNAMIC TURBULENCE IN THE SMALL MAGELLANIC CLOUD

We investigate the nature and spatial variations of turbulence in the Small Magellanic Cloud (SMC) by applying several statistical methods on the neutral hydrogen (H I) column density image of the SMC and a database of isothermal numerical simulations. By using the third and fourth statistical moments we derive the spatial distribution of the sonic Mach number (M{sub s}) across the SMC. We find that about 90% of the H I in the SMC is subsonic or transonic. However, edges of the SMC 'bar' have M{sub s}approx4 and may be tracing shearing or turbulent flows. Using numerical simulations we also investigate how the slope of the spatial power spectrum depends on both sonic and Alfven Mach numbers. This allows us to gauge the Alfven Mach number of the SMC and conclude that its hydrodynamic pressure dominates over the magnetic pressure. The trans-Alfvenic nature of the H I gas in the SMC is also highlighted by the bispectrum, a three-point correlation function which characterizes the level of non-Gaussianity in wave modes. We find that the bispectrum of the SMC H I column density displays similar large-scale correlations as numerical simulations; however, it has localized enhancements of correlations. In addition, we find a break in correlations at a scale of approx160 pc. This may be caused by numerous expanding shells of a similar size.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational studies on scattering of radio frequency waves by density filaments in fusion plasmas

In modern magnetic fusion devices, such as tokamaks and stellarators, radio frequency (RF) waves are commonly used for plasma heating and current profile control, as well as for certain diagnostics. The frequencies of the RF waves range from ion cyclotron frequency to the electron cyclotron frequency. The RF waves are launched from structures, like waveguides and current straps, placed near the wall in a very low density, tenuous plasma region of a fusion device. The RF electromagnetic fields have to propagate through this scrape-off layer before coupling power to the core of the plasma. The scrape-off layer is characterized by turbulent plasmas fluctuations and by blobs and filaments. The variations in the edge density due to these fluctuations and filaments can affect the propagation characteristics of the RF waves—changes in density leading to regions with differing plasma permittivity. Analytical full-wave theories have shown that scattering by blobs and filaments can alter the RF power flow into the core of the plasma in a variety of ways, such as through reflection, refraction, diffraction, and shadowing [see, for example, Ram and Hizanidis, Phys. Plasmas 23, 022504 (2016), and references therein]. There are changes in the wave vectors and the distribution of power–scattering leading to coupling of the incident RF wave to other plasma waves, side-scattering, surface waves, and fragmentation of the Poynting flux in the direction towards the core. However, these theoretical models are somewhat idealized. In particular, it is assumed that there is step-function discontinuity in the density between the plasma inside the filament and the background plasma. In this paper, results from numerical simulations of RF scattering by filaments using a commercial full-wave code are described. The filaments are taken to be cylindrical with the axis of the cylinder aligned along the direction of the ambient magnetic field. The plasma inside and outside the filament is assumed to be cold. There are three primary objectives of these studies. The first objective is to validate the numerical simulations by comparing with the analytical results for the same plasma description—a step-function discontinuity in density. A detailed comparison of the Poynting flux shows that numerical simulations lead to the same results as those from the theoretical model. The second objective is to extend the simulations to take into account a smooth transition in density from the background plasma to the interior of the filament. The ensuing comparison shows that the deviations from the results of the theoretical model are quite small. The third objective is to consider the scattering process for situations well beyond a reasonable theoretical analysis. This includes scattering off multiple filaments with different densities and sizes. In conclusion, simulations for these complex arrangements of filaments show that, in spite of the obvious limitations, the essential physics of RF scattering is captured by the analytical theory for a single filament

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermodynamic stability of a spin microemulsion in Rashba spin-orbit-coupled bosons

Recent finite-temperature numerical simulations have unveiled a quantum “spin” microemulsion analog, found by raising the temperature of a stripe supersolid phase in a Rashba spin-orbit coupled Bose gas. This microemulsion state is a highly correlated, isotropic normal fluid where atoms self-arrange based on their internal pseudospin into patterns that resemble bicontinuous microemulsions. This finding leaves several open questions regarding the broader accessibility of this phase in experiments. Here, we use equilibrium finite-temperature numerical simulations based on a coherent-state path integral representation to perform a computational investigation into the thermodynamic stability of the spin microemulsion state. Numerical simulations emphasize the requirement of a nearly, but not perfectly, isotropic spin-orbit coupling in order to achieve the microemulsion phase in cold-atom experiments. Moreover, the microemulsion state exists independent of miscibility of the pseudospin components and for a wide range of pseudospin population imbalance, suggesting a high degree of flexibility in choosing the atom and hyperfine states in an experimental realization. Lastly, we demonstrate this feasibility by mimicking a Rashba spin-orbit-coupled 87 Rb experiment in an isotropic harmonic trap, where we confirm the microemulsion's existence via its density profile and equilibrium quasimomentum distribution.

Complex Langevin dynamics↗

An Experimental Study of Shear-Dominated Failure in the 2013 Sandia Fracture Challenge Specimen

This report presents an experimental study motivated by results obtained during the 2013 Sandia Fracture Challenge. The challenge involved A286 steel, shear-dominated compression specimens whose load-deflection response contained a load maximum fol- lowed by significant displacement under decreasing load, ending with a catastrophic fracture. Blind numerical simulations deviated from the experiments well before the maximum load and did not predict the failure displacement. A series of new tests were conducted on specimens machined from the original A286 steel stock to learn more about the deformation and failure processes in the specimen and potentially improve future numerical simulations. The study consisted of several uniaxial tension tests to explore anisotropy in the material, and a set of new tests on the compression speci- men. In some compression specimen tests, stereo digital image correlation (DIC) was used to measure the surface strain fields local to the region of interest. In others, the compression specimen was loaded to a given displacement prior to failure, unloaded, sectioned, and imaged under the microscope to determine when material damage first appeared and how it spread. The experiments brought the following observations to light. The tensile tests revealed that the plastic response of the material is anisotropic. DIC during the shear- dominated compression tests showed that all three in-plane surface strain components had maxima in the order of 50% at the maximum load. Sectioning of the specimens revealed no signs of material damage at the point where simulations deviated from the experiments. Cracks and other damage did start to form approximately when the max- imum load was reached, and they grew as the load decreased, eventually culminating in catastrophic failure of the specimens. In addition to the steel specimens, a similar study was carried out for aluminum 7075-T651 specimens. These specimens achieved much lower loads and displacements, and failure occurred very close to the maximum in the load-deflection response. No material damage was observed in these specimens, even when failure was imminent. In the future, we plan to use these experimental results to improve numerical simu- lations of the A286 steel experiments, and to improve plasticity and failure models for the Al 7075 stock. The ultimate goal of our efforts is to increase our confidence in the results of numerical simulations of elastic-plastic structural behavior and failure.

36 MATERIALS SCIENCE↗

An approach for drag correction based on the local heterogeneity for gas-solid flows

The drag models typically used for gas-solids interaction are mainly developed based on homogeneous systems of flow passing fixed particle assembly. It has been shown that the heterogeneous structures, i.e., clusters and bubbles in fluidized beds, need to be resolved to account for their effect in the numerical simulations. Since the heterogeneity is essentially captured through the local concentration gradient in the computational cells, this study proposes a simple approach to account for the non-uniformity of solids spatial distribution inside a computational cell and its effect on the interaction between gas and solid phases. Finally, to validate this approach, the predicted drag coefficient has been compared to the results from direct numerical simulations. In addition, the need to account for this type of heterogeneity is discussed for a periodic riser flow simulation with highly resolved numerical grids and the impact of the proposed correction for drag is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical computations and optical diagnostics of unsteady partially premixed methane/air flames

The structures and dynamics of unsteady laminar partially premixed methane/air Bunsen flames are studied by means of numerical simulations, OH and CH PLIF imaging, and high speed chemiluminescence imaging employing a high framing speed intensified charge coupled device camera. The Bunsen burner has a diameter of 22 mm. Rich methane/air mixtures with an equivalence ratio of 1.5 are injected from the burner into atmosphere at different flow speeds ranging from 0.77 to 1.7 m/s, with Reynolds numbers based on the nozzle flow ranging from 1100 to 2500. The numerical simulations are based on a two-scalar flamelet manifold tabulation approach. Detailed chemistry is used to generate the flamelet manifold tabulation which relates the species concentrations, reaction rates, temperature and density to a distance function G and mixture fraction Z. Two distinct reaction zones are identified using CH and OH PLIF imaging and numerical simulations; one inner reaction zone corresponds to premixed flames on the rich side of the mixture and one outer reaction zone corresponds to mixing controlled diffusion flames on the lean side of the mixture. Under normal gravity conditions both the inner premixed flames and the outer diffusion flames are unsteady. The outer diffusion flames oscillate with a flickering frequency of about 15 Hz, which slightly increases with the burner exit velocity. The inner premixed flames are more random with much more small-scale wrinkling structures. Under zero gravity conditions the outer diffusion flames are stable whereas the inner premixed flames are unstable and highly wrinkled. It appears that the outer diffusion flames are governed by the Rayleigh-Taylor instability whereas the inner premixed flames are dictated by Landau-Darrieus instability. The two-scalar flamelet approach is shown to capture the basic structures and dynamics of the investigated unsteady partially premixed flames. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗