Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Methane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Optimization of structural and energy characteristics of adsorbents for methane storage

Using numerical and analytical methods, a model for microporous carbon adsorbents with slit-shaped pores of different widths was developed. Such pores are formed during activation procedure by the removal of the hexagonal carbon layers burnt out in a graphite-like crystallites. Dubinin’s theory of volume filling of micropores was used to calculate methane adsorption equilibria on these model adsorbents. Isobaric dependences of methane adsorption on pore width, specific micropore volumes, and the specific surface were plotted in the range of pressures from 1 to 10 MPa. It was found that the isobaric adsorption curves had a maximum the position of which depends on both the structural-energy characteristics of the adsorbent and thermodynamic conditions chosen to operate the adsorption system. As pressure increased, the maximum of adsorption shifts to the porous systems with wider pores and larger micropore volume.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methane Production by Co-Digesting Vinasse and Whey in an AnSBBR: Effect of Mixture Ratio and Feed Strategy

The most common approach to deal with vinasse (sugarcane stillage) is fertigation, but this technique compromises soil structure and surrounding water bodies. A possible solution is to transport vinasse to local cheese whey producers and perform the co-digestion of these wastewaters together, reducing their organic load and generating bioenergy. Therefore, this study investigated the application of an AnSBBR (anaerobic sequencing batch biofilm reactor) operated in batch and fed-batch mode, co-digesting vinasse and whey at 30 °C. The effect of influent composition and feeding strategy was assessed. In all conditions, the system achieved high organic matter removal (approximately 83%). Increasing the percentage of vinasse from 0 to 100% in the influent resulted in a decrease in methane productivity (76.3 to 51.1 molCH{sub 4} m{sup −3} day{sup −1}) and yield (12.7 to 9.1 molCH{sub 4} kgCOD{sup −1}), but fed-batch mode operation improved reactor performance (73.0 molCH{sub 4} m{sup −3} day{sup −1} and 11.5 molCH{sub 4} kgCOD{sup −1}). From the kinetic metabolic model, it was possible to infer that, at the best condition, methane is produced in a similar way from the acetoclastic and hydrogenotrophic routes. A scheme of four parallel reactors with a volume of 16,950 m{sup 3} each was proposed in the scale-up estimation, with an energy recovery estimated in 28,745 MWh per month.

60 APPLIED LIFE SCIENCES↗

Hydrometeorological sensitivities of net ecosystem carbon dioxide and methane exchange of an Amazonian palm swamp peatland

Here, we report ecosystem-scale CO 2 and CH 4 flux observations for an Amazonian palm swamp peatland over a two-year period in relation to hydrometeorological forcings. Seasonal and short-term variations in hydrometeorological forcing had a strong effect on carbon dioxide and methane fluxes. High air temperature and vapor pressure deficit exerted an important limitation on photosynthesis during the dry season, while latent heat flux appeared to be insensitive to these climate drivers. Evidence from light-response analyses and flux partitioning support that photosynthetic activity was downregulated during dry conditions, while ecosystem respiration was either inhibited or enhanced depending on water table position. The cumulative net ecosystem carbon dioxide exchange indicated that the peatland was a significant carbon dioxide sink ranging from –465 (–279 to –651) g C m -2 y -1 in 2018 to –462 (–277 to –647) g C m -2 y -1 in 2019. The forest was a methane source of 22 (20 to 24) g C m -2 y -1 , similar in magnitude to other tropical peatlands and larger than boreal and arctic peatlands. Furthermore, the annual carbon budget of this Amazonian palm swamp peatland appears to be a major carbon sink under current hydrometeorological conditions, but evidence indicates that the sink strength is vulnerable to future climate change.

54 ENVIRONMENTAL SCIENCES↗

A re-examination of the catalyst activation and temperature hysteresis in methane combustion on Pt/Al 2 O 3

Methane combustion is an industrially important reaction that has been extensively studied. Supported Pt catalysts on Al 2 O 3 exhibit excellent activity in this reaction owing to their Csingle bondH bond activation capability. Pt/Al 2 O 3 catalyst remains almost inactive until the conversion increases abruptly at the ignition temperature (T ign ). The temperature hysteresis behavior has been reported, where after ignition, as the temperature is lowered below T ign , the catalyst continues to exhibit high activity. The activation has been previously attributed to the removal of adsorbed oxygen on Pt sites at T ign , while the hysteresis has been explained by the local temperature elevation caused by the reaction heat. Here in this work, this behavior was re-examined at a small scale in a fixed-bed flow reactor over a range of pre-treatment and reaction mixture conditions. Low-temperature activation was achieved by pre-treating the catalyst with CH 4 . Carefully designed control experiments yielded observations that cannot be rationalized by the existing theory, suggesting that it is incomplete. Based on these new results, we propose a more comprehensive theory describing the active sites in the oxidation reaction as methane-derived adsorbed carbon active sites, and their formation as the controlling factor in the catalyst activation. The hysteresis can be better explained by the enhanced stability of active sites under reaction conditions. In situ infrared spectroscopy and mass spectrometry studies were conducted in a flow cell, providing strong evidence supporting the theory. The dissociative adsorption of CH 4 was studied under a variety of pre-treatment conditions, and proved to be responsible for the active site formation. The fundamental understanding obtained in this work contributes significant insights to the understanding of reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zeolite supported Pd catalysts for the complete oxidation of methane: A critical review

This review summarizes the recent literature reports on the development of zeolite supported Pd catalysts for the complete oxidation of methane. In-depth analysis reveals that different types of zeolite framework structures, regardless of the dimensionality, pore opening structure, and channel size, have little influence on the methane oxidation activity or the on-stream stability of the supported Pd catalysts. In contrast, the Si/Al ratio of a zeolite support plays a critical role. Both the catalytic activity and the on-stream stability of a Pd/zeolite catalyst increase with the increase of the Si/Al ratio. Catalysts supported on siliceous zeolites consistently show excellent light-off activity and remarkable on-stream stability whether in a dry or wet feed. Silanol nest defect sites in a siliceous zeolite are proposed to be the anchoring sites promoting the formation and minimizing the sintering of finely dispersed Pd nanoparticles. Remaining challenges in overcoming the sulfur poisoning effect are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of residual chlorine on Ru/TiO 2 active sites during CO 2 methanation

Titania-supported ruthenium (Ru/TiO 2 ) is an established catalyst for the hydrogenation of carbon dioxide to methane (Sabatier reaction). Chlorine contamination, owed to the RuCl 3 precursor, is demonstrated to have a detrimental impact on methanation activity. After calcination and reduction the catalyst contains residual chlorine, shown by XPS. An aqueous ammonia wash removes Cl without leaching Ru. The washed catalysts exhibit improvements in CH 4 site-time yields. Low Ru loading catalysts encounter the greatest activity enhancements after washing (~4.5-fold). DFT calculations indicate that chlorine and CO 2 directly compete for adsorption on Ru step sites, with Cl impeding the adsorption of CO 2 at under-coordinated sites and at higher Cl coverages. H 2 -chemisorption/TPR show that Cl removal lowers the onset of low temperature H 2 dissociation on Ru. Finally, DRIFTS provide evidence that the removal of Cl facilitates low temperature dissociative binding of CO 2 , indicated by the formation of surface bound linear CO species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic methane pyrolysis in molten MnCl 2 -KCl

Methane decomposition to produce molecular hydrogen and solid carbon was catalyzed by contact with molten KCl:MnCl 2 mixtures in a bubble column reactor from 700 to 1050 °C. The apparent activation energy decreased from approximately 300 kJ/mole for pure KCl to 161 kJ/mole in a 67:33 mol % mixture of KCl:MnCl 2 . At 30% methane conversion, pyrolysis in the KCl:MnCl 2 melt at 1050 °C had high hydrogen selectivity (˜99%) in comparison to pure molten KCl (˜90%), which was observed to produce multiple hydrocarbon co-products. The pyrolysis activity of the KCl:MnCl 2 melt remained stable for over 30 h and produced a separable, highly graphitic carbon solid that accumulated at the surface of the higher-density salt melt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic study of Ni-M/CNT catalyst in methane decomposition under microwave irradiation

Methane catalytic decomposition has been studied with catalysts that can attenuate the energy of electromagnetic waves to heat and drive the reaction. Herein, we report, for the first time, a comprehensive kinetic study of Ni-M (M=Pd, Cu, or Fe)-CNT catalysts under microwave irradiation. These binary metal alloy nanoparticles have been synthesized on multiwalled carbon nanotube support with solvothermal process. These catalysts showed incredible performance for both absorbing microwave energy and catalyzing the reaction to form carbon nanotubes and hydrogen. Ni-M-CNT has a reaction order of 0.74. 10Ni-1 Pd-CNT, 10Ni-1Cu-CNT, and 10Ni-1Fe-CNT have activation energies at 87, 75, and 69 kJ/mol. The investigation was carried out in a differential reactor. The results indicated that 10Ni-1Fe-CNT had the lowest activation energy due to the increase in microwave susceptibility. Here, this work pioneered the microwave catalytic methane decomposition field as well as paving the way for future electrification of CO x -free hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An integrated methane dehydroaromatization and chemical looping process

Most of the natural gas co-produced in oil wells is flared due to the high transportation costs of bringing it to market. Onsite upgrading of natural gas to liquid products could address this issue but there are few processes for effective direct conversion of natural gas to liquid products. Methane dehydroaromatization (DHA) over Mo/HZSM- 5 offers a potential route to a value-added liquid product, however, DHA conversion is severely limited by thermodynamics at most industrially relevant temperatures. Here we propose an integrated process coupling methane DHA, chemical looping for selective hydrogen oxidation, and subsequent water removal to achieve higher yields of aromatic products limited by the thermodynamics in one-pass systems. Here, we validate this process via the construction and operation of a one-of-a-kind multibed recirculating reactor, and achieve a combined aromatics yield of 42%. Detailed technoeconomic analysis of the process for mobile applications show that such a process could be economically viable under certain circumstances.

03 NATURAL GAS↗

Geocatalytically generated methane from low-maturity coal and shale source rocks at low temperatures (80–120 °C) over 52 months

Geocatalytic methanogenesis has been proposed to contribute to methane generation from low-maturity coal and shale source rocks. This study contributes further evidence for geocatalytic methanogenesis from low-maturity source rocks based on long-term experiments lasting up to 52 months. Samples from the Upper Devonian New Albany Shale (R o 0.54 %) and Springfield Coal No. 2 (Pennsylvanian; R o 0.54 %) were heated in glass tubes at 80, 100, and 120 °C for 52 months. Sample aliquots from the Upper Cretaceous Second White Specks Formation (R o 0.42 %) were heated in gold tubes at 80 and 100 °C for 42 months at elevated hydrostatic pressures of 100 to 300 MPa. The product gases — methane (CH 4 ) and carbon dioxide (CO 2 ) — were collected and quantified, and gas yields were corrected for leakage from imperfectly closed pores in samples during heating. The results show that longer heating produced more CH 4 . The average CH 4 yields from New Albany Shale and Springfield Coal No. 2 are 0.47 and 3.0 μmol CH 4 per gram of total organic carbon (TOC) over 52 months of heating. Elevated hydrostatic pressure caused lower CH 4 yields from the Second White Specks Formation (3.82 to 1.20 μmol g –1 TOC), suggesting that pressure can retard methanogenesis. Maceral type critically controls the methanogenesis potential of low-maturity coal and shale source rocks. Finally, results of this study provide important insights to the origin of natural gas in low-maturity sedimentary basins.

01 COAL, LIGNITE, AND PEAT↗

Flame propagation and counterflow nonpremixed ignition of mixtures of methane and ethylene

The ignition temperature of nitrogen-diluted mixtures of methane and ethylene counterflowing against heated air was measured up to five atmospheres. In addition, the stretch-corrected laminar flame speeds of mixtures of air, methane and ethylene were determined from outwardly-propagating spherical flames up to 10 atmospheres, for extensive range of the lean-to-rich equivalence ratio. These experimental data, relevant to low- to moderately-high-temperature ignition chemistry and high-temperature flame chemistry, respectively, were subsequently compared with calculations using two detailed kinetic mechanisms. A chemical explosive mode analysis (CEMA) was then conducted to identify the dominant ignition chemistry and the role of ethylene addition in facilitating nonpremixed ignition. Furthermore, the hierarchical structure of the associated oxidation kinetics was examined by comparing the sizes and constituents of the skeletal mechanisms of the pure fuels and their mixtures, derived using the method of directed relation graph (DRG). The skeletal mechanism was further reduced by time-scale analysis, leading to a 24-species reduced mechanism from the detailed mechanism of USC Mech II, validated within the parameter space of the conducted experiments. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical study on the spark ignition characteristics of a methane-air mixture using detailed chemical kinetics. Effect of equivalence ratio, electrode gap distance, and electrode radius on MIE, quenching distance, and ignition delay

The minimum ignition energy (MIE) is an important property for designing safety standards and understanding the ignition process of combustible mixtures. Even though the formation of flame kernels in quiescent methane-air mixtures has been simulated numerically, the ignition mechanism has never been satisfactorily explained. This study investigated the spark ignition of methane-air mixtures through a numerical analysis using detailed chemical kinetics consisting of 53 species and 325 elementary reactions while considering the heat loss to the electrode. The simulation was used to investigate the quenching distance and the effects on the MIE of the electrode size, electrode gap distance, ignition duration, and equivalence ratio. The effect of the equivalence ratio on the ignition delay time was also examined. The simulated results showed the same trend as previous experimental results. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Integrated solar thermochemical reaction system for steam methane reforming

Solar-aided upgrade of the energy content of fossil fuels, such as natural gas, can provide a near-term transition path towards a future solar-fuel economy and reduce carbon dioxide emission from fossil fuel consumption. Both steam and dry reforming a methane-containing fuel stream have been studied with concentrated solar power as the energy input to drive the highly endothermic reactions but the concept has not been demonstrated at a commercial scale. Under a current project with the U.S. Department of Energy, PNNL is developing an integrated solar thermochemical reaction system that combines solar concentrators with micro- and meso-channel reactors and heat exchangers to accomplish more than 20% solar augment of methane higher heating value. The objective of our three-year project is to develop and prepare for commercialization such solar reforming system with a high enough efficiency to serve as the frontend of a conventional natural gas (or biogas) combined cycle power plant, producing power with a levelized cost of electricity less than 6¢/kWh, without subsidies, by the year 2020. In this paper, we present results from the first year of our project that demonstrated a solar-to-chemical energy conversion efficiency as high as 69% with a prototype reaction system.

03 NATURAL GAS↗

Temperature evolution on Rh/Al{sub 2}O{sub 3} catalyst during partial oxidation of methane in a reverse flow reactor

Catalytic partial oxidation of methane was investigated in a reverse flow reactor with commercial Rh/Al{sub 2}O{sub 3} catalyst in pellets. The process is carried out in a catalytic fixed bed reactor and switching of feed flow direction is obtained through four electrovalves synchronized in pairs. Temperature profile along the catalyst bed was measured by fast IR thermography and product composition was measured with a continuous gas analyzer. Feed direction switching time, water to methane ratio and inert section length were investigated as process parameters. Data of catalyst bed temperature evolution during the flow cycle are presented, discussed and related to reactor performance as a function of reverse flow switching period. The effect of water addition to the reacting mixture on the dynamics of catalyst bed temperature evolution is also presented. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A shock tube study of ignition delay times in diluted methane, ethylene, propene and their blends at elevated pressures

Ignition delay times (IDT) of small hydrocarbons at elevated pressures provide a valuable constraint for the refinement of the core small-hydrocarbon sub-mechanisms used in all combustion kinetics. Current knowledge of these core mechanisms is based largely on low-pressure data, with only limited high-pressure data available. To remedy this, here the present study focuses on ignition delay times in methane, ethylene, propene and their blends at elevated pressures. IDT measurements were performed in 4% O 2 , balance Ar mixtures, over the temperature range of 950–1800 K, at pressures of 14–60 atm and equivalence ratios of 1 and 2. IDT was determined from recorded sidewall pressure, OH* emission measurements and fuel time-histories measured using laser absorption at 3.39 μm. These measurements extend the test conditions of earlier studies, with the advantage that they have all been performed at similar conditions and with the same facility and should provide a uniform set of kinetics targets for the evaluation of core small-hydrocarbon mechanisms. This dataset also allowed the temperature variation of the pressure and equivalence ratio scaling for methane and ethylene IDT to be investigated.

42 ENGINEERING↗

Enhanced activity and stability of MgO-promoted Ni/Al 2 O 3 catalyst for dry reforming of methane: Role of MgO

Highly dispersed nickel nanoparticles (NPs) were deposited on Al 2 O 3 NPs by atomic layer deposition (ALD). Various amounts of MgO were loaded on Ni/Al 2 O 3 catalysts by the incipient wetness (IW) method for dry reforming of methane. Fresh and used catalysts were systematically characterized to reveal the effects of MgO on the catalytic performance. MgO was found to increase the basic amount and basic strength of catalyst surfaces, which provided additional surface oxygen species and assisted the adsorption and activation of CO 2 . Although the formation of NiO-MgO solid solution, during the calcination of incipient wetness, did not improve the overall reducibility, the Ni NPs from NiO-MgO solid solution after reduction formed an intimate interaction with MgO, which could inhibit Ni NPs from sintering and provide sufficient metal-support interface for CO 2 activation. The MgO-promoted Ni/Al 2 O 3 reached a methane reforming rate of 1780 L CH4 g Ni -1 h -1 at 850 °C, which is 26% more than that of the pristine Ni/Al 2 O 3 . Finally, the higher CO 2 activity enhanced the oxidation rate of the surface carbon generated from side-reactions, thereby resulting in a higher reforming rate and inhibiting coke formation, especially the detrimental graphitic encapsulating carbon on the active nickel surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Skeletal reaction models for methane combustion

A local-sensitivity-analysis technique is employed to generate new skeletal reaction models for methane combustion from the foundational fuel chemistry model (FFCM-1). Here, the sensitivities of the thermo-chemical variables with respect to the reaction rates are computed via the forced-optimally time dependent (f-OTD) methodology. In this methodology, the large sensitivity matrix containing all local sensitivities is modeled as a product of two low-rank time-dependent matrices. The evolution equations of these matrices are derived from the governing equations of the system. The modeled sensitivities are computed for the auto-ignition of methane at atmospheric and high pressures with different sets of initial temperatures, and equivalence ratios. These sensitivities are then analyzed to rank the most important (sensitive) species. A series of skeletal models with different number of species and levels of accuracy in reproducing the FFCM-1 results are suggested. The performances of the generated models are compared against FFCM-1 in predicting the ignition delay, the laminar flame speed, and the flame extinction. The results of this comparative assessment suggest the skeletal models with 24 and more species generate the FFCM-1 results with an excellent accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CFD modeling of near-wall combustion and unburned methane prediction in natural gas spark ignition engines

Natural gas-powered engines play a critical role in gas drilling, compression, and transmission sectors, but methane (CH 4 ) from engine combustion slip can be significant over their lifespan, contributing to atmospheric pollution and signaling reduced engine efficiency. Here, to address this challenge, computational fluid dynamics (CFD) simulations offer valuable insights into the in-cylinder combustion process, enabling the optimization of combustion strategies and engine designs to minimize unburned CH 4 slip. This study aims to evaluate and improve combustion models for simulating the combustion process and predicting unburned CH 4 concentrations in natural gas spark-ignition (SI) engines, including engines that are part of combined reformer-engine systems. Specifically, the performance of two flamelet-based combustion models—the Extended Coherent Flame Model (ECFM) and the G-equation model—was assessed using experimental engine data collected under varying excess-air ratio (λ) conditions and fuel compositions, including natural gas and syngas blends. In addition, to enhance the predictive capabilities of the G-equation model, a flame-wall interaction (FWI) sub-model was integrated into its framework. The effects of its model parameters, such as quenching and influence distance, on combustion behavior and unburned methane predictions were analyzed in detail. The ECFM tended to predict delayed combustion phasing under diluted mixture conditions, resulting in overprediction of unburned CH 4 concentrations. In contrast, the G-equation model provided reasonable predictions of combustion pressure, while representing higher the CH 4 reduction rate across the operating condition compared to experimental data. Incorporating the FWI sub-model—with the quenching distance calculated based on a pressure-dependent relation (P -0.48 ) and a fixed influence distance of 1.5 mm—further improved the G-equation model’s accuracy in predicting CH 4 reduction rates without compromising its ability to simulate the combustion process.

Combustion model↗