Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Measurement Science Laboratory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

C 12 ( n , n 1 ′ γ ) partial γ -ray cross section measured using the GENESIS array

Improved neutron inelastic scattering cross sections have repeatedly been identified as a top priority nuclear data need, important for basic science and a range of applications in nuclear energy, stockpile stewardship, and proliferation detection. For the C 12 ( n , n ′ γ ) reaction in particular, recent measurements have unveiled some structural discrepancies, demonstrating incongruities among themselves and in relation to the ENDF/B-VIII.0 nuclear data evaluation. To help resolve these disagreements, a measurement was performed at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory using a broad-spectrum neutron beam and a 99.8% pure natural carbon target. The Gamma Energy Neutron Energy Spectrometer for Inelastic Scattering (GENESIS) was employed to measure energy-differential γ -ray emission spectra as a function of incident neutron energy in the energy range of 5.5 to 16.7 MeV. The C 12 partial γ -ray cross sections were extracted at 63 ∘ , 122 . 5 ∘ , and 150 ∘ with respect to the incoming neutron beam and integrated using angular distribution data available in the literature. The data show agreement with a recent literature measurement and evaluation from 11 to 15 MeV, but indicate a larger cross section for incident neutron energies between 5.5 and 8.5 MeV. The measured relative angular distributions are also reported and were found to agree with evaluation. Published by the American Physical Society 2025

Gordon, J. M. (ORCID:0009000789886897)↗

Assessing Performance and Tradeoffs of Bioforensic Signature Systems

Chemical and biological forensic programs rely heavily on laboratory measurements to determine how a threat agent may have been produced. In addition to laboratory analyses, it may also be useful to identify institutions where the same threat agent has been produced by the same or a very similar process, since the producer of the agent may have learned methods at a university or similar institution. We developed a Bayesian network framework that combines the results of laboratory measurements with evidence from scientific literature to probabilistically rank institutions that have published papers on the agent of interest. As an example, we consider a network of three laboratory assays that are used to estimate the probabilities that a forensic sample of Yersinia pestis was produced using one of three culture media. We then apply techniques from multi-attribute decision science to assess and compare the performance of the various implementations of the Bayesian network in terms of three attributes: fidelity, document curation intensity, and consumption of the forensic sample. The mathematical approach we use to compare the various implementations is generalizable to the evaluation of other signature systems.

Watkins, Daniel M.↗

Accurate expressions for the dew point and frost point derived from the Rankine-Kirchhoff approximations

Accurate, explicit, and analytic expressions are derived for the dew point and frost point as functions of temperature and relative humidity. These are derived theoretically in terms of physical constants using the Rankine-Kirchhoff approximations, which assume an ideal gas, fixed heat capacities, and zero specific volume of condensates. Compared to modern laboratory measurements, the expressions are accurate to within a few hundredths of a degree over the full range of Earth-relevant temperatures, from 180 to 273 K for the frost point and 230 to 330 K for the dew point.

54 ENVIRONMENTAL SCIENCES↗

Canopy spectra, Feb2017, PA-SLZ: Panama

Canopy spectra of sunlit canopy of Guarea kunthiana, Brosimum utile, Terminalia amazonia (TERMAM), Vochysia ferruginea (VOCHFE), Miconia borealis (MICOBO) and Guatteria dumetorum (GUATDU) species from the Smithsonian Tropical Research Institute (STRI) canopy crane site in the San Lorenzo National Park, Republic of Panama (PA-SLZ: Bosque Protector San Lorenzo). Canopy spectra were measured at 1:20 – 2 pm on 22 February 2017, using a SVC spectroradiometer. This data package includes the raw SVC data (*.sig), processed data of individual spectra, and processed spectra averaged over the canopy of each of the six trees measured (*.csv). The package also includes photographs of the canopy spectral targets, metadata and the instrument manual. This data was collected as part of the 2017 Brookhaven National Laboratory – Smithsonian Tropical Research Institute leaf traits by age campaign.

54 ENVIRONMENTAL SCIENCES↗

Cognitive Foundations for Visual Analytics

In this report, we provide an overview of scientific/technical literature on information visualization and VA. Topics discussed include an update and overview of the extensive literature search conducted for this study, the nature and purpose of the field, major research thrusts, and scientific foundations. We review methodologies for evaluating and measuring the impact of VA technologies as well as taxonomies that have been proposed for various purposes to support the VA community. A cognitive science perspective underlies each of these discussions.

99 GENERAL AND MISCELLANEOUS↗

Environmental Surveillance at Los Alamos during 2009

Environmental Surveillance at Los Alamos reports are prepared annually by the Los Alamos National Laboratory (the Laboratory) environmental organization, as required by US Department of Energy Order 5400.1, General Environmental Protection Program, and US Department of Energy Order 231.1A, Environment, Safety, and Health Reporting. These annual reports summarize environmental data that are used to determine compliance with applicable federal, state, and local environmental laws and regulations, executive orders, and departmental policies. Additional data, beyond the minimum required, are also gathered and reported as part of the Laboratory’s efforts to ensure public safety and to monitor environmental quality at and near the Laboratory. Chapter 1 provides an overview of the Laboratory’s major environmental programs and explains the risks and the actions taken to reduce risks at the Laboratory from environmental legacies and waste management operations. Chapter 2 reports the Laboratory’s compliance status for 2009. Chapter 3 provides a summary of the maximum radiological dose the public and biota populations could have potentially received from Laboratory operations and discusses chemical exposures. The environmental surveillance and monitoring data are organized by environmental media (air in Chapter 4; water and sediments in Chapters 5 and 6; soils in Chapter 7; and foodstuffs and biota in Chapter 8) in a format to meet the needs of a general and scientific audience. Chapter 9 provides a summary of the status of environmental restoration work around LANL. The new Chapter 10 describes the Laboratory’s environmental stewardship efforts and provides an overview of the health of the Rio Grande. A glossary and a list of acronyms and abbreviations are in the back of the report. Appendix A explains the standards for environmental contaminants, Appendix B explains the units of measurements used in this report, Appendix C describes the Laboratory’s technical areas and their associated programs, and Appendix D provides web links to more information.

54 ENVIRONMENTAL SCIENCES↗

UV-Vis Spectroscopy as a Tool for Safeguards; Instrumentation installation and fundamental data collection

Two spectrophotometric process monitors, one optimized for high concentration (approximately 10 g/L) and one for trace levels (approximately 10 ppm),were developed at Argonne and installed at the SRS H-Canyon facility for field testing. These systems were built of Commercial-Off-The-Shelf components utilizing a custom, facility-specific hardware interface. The systems directly provide a qualitative measurement of process chemistry (i.e. valence state). With appropriate calibrations the systems could provide quantitative data. Laboratory tests were performed to determine the spectrophotometric molar absorptivity coefficients for relevant actinide and transition metals of interest.

36 MATERIALS SCIENCE↗

Proper use of HHDRIFT in surveillance and production conditions

With higher quality optics, newer benchtop DRIFT (diffuse reflectance infrared Fourier transform) spectroscopy systems with modern electronic circuitries should be the preferred choice if detection sensitivity, intensity, and reliability are top priorities. However, when space consideration or other restrictions require the use of a HHDRIFT (handheld DRIFT), it is possible to convert the measurements of the HHDRIFT to those obtained from any benchtop DRIFT and vice versa. In this report, the conversion of the measurements between a HHDRIFT and a benchtop DRIFT at LLNL (Lawrence Livermore National Laboratory) are shown to be linear in both production and surveillance conditions. A similar methodology can be used to obtain the measurement correlations between any HHDRIFT and any benchtop DRIFT at other sites.

36 MATERIALS SCIENCE↗

CONFIDANTE Demonstration Prototype Report

This report summarizes design optimization and performance evaluation studies for a new prototype CONFIDANTE (CONfirmation using a Fast-neutron Imaging Detector with Anti-image Null-positive Time Encoding) warhead confirmation system. It was found that a spherical mask geometry and a 2” diameter cylindrical central detector is expected to best discriminate between the parametrically varied source distributions that were evaluated. The optimized design as fabricated and its performance was evaluated in a series of laboratory measurements. The performance was in good agreement with the design studies, with demonstrated discrimination between objects with differences in scale on the order of 5 centimeters or better at 1 meter stand-off

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of Real-Time, In-pile Creep Test Rigs for Characterizing the Structural Materials of Nuclear Components

New and improved materials are being considered for supporting both existing and next-generation nuclear reactors. Reactor materials can significantly degrade with time, thus limiting or altering their properties in harsh reactor environments. To accurately understand such material degradation, real-time data obtained under prototypic irradiation conditions are required. In particular, understanding the creep behavior of materials exposed to irradiation and elevated temperatures is essential for safety concern evaluations. To provide these capabilities, Idaho National Laboratory (INL)’s High Temperature Test Laboratory (HTTL) developed several instrumented test rigs for obtaining real-time data from specimens in well-controlled pressurized-water reactor (PWR) coolant conditions at the Materials Test Reactor. This technical report focuses on INL’s efforts to evaluate and enhance the former creep test rig prototype that relied on linear variable differential transformers in laboratory settings. Specifically, the test rig can detect changes in the length of creep specimens, which is useful for measuring thermal expansion and creep deformation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Determination of Constraint-Independent Crack Tip Opening Angle for Stable Crack Growth in High-Strength Ductile Steels

The crack tip opening angle (CTOA) is one of fracture toughness parameters that has been used for decades in describing large stable crack growth in thin-walled aerospace structures under the low-constraint conditions. Recently, the pipeline industry has developed a growing interest in using the CTOA parameter to serve as the minimum required fracture toughness to arrest dynamic crack propagation in modern gas transmission pipelines made of high-strength ductile steel. To meet this industrial need, the CTOA test standard ASTM E3039 was therefore developed for measuring the constant critical CTOA. ASTM E3039 recommends a drop weight tearing test (DWTT) specimen with a shallow crack for standard CTOA testing, but its CTOA may depend on the low constraint condition of the DWTT specimen at the crack tip. Verifying the constraint independence of the DWTT-measured CTOA thus becomes indispensable for applying CTOA toughness to the running fracture control in the pipeline design. For this purpose, the present paper evaluates critical CTOA values in a set of fracture toughness tests on single-edge notched bend (SENB) specimens with shallow and deep cracks, based on four CTOA estimation models. Among these, the Ln(P)-LLD linear fit model is similar to that recommended by ASTM E3039 for CTOA calculation. Fracture test data for X80 pipeline steel and HY80 structural steel were considered in the CTOA evaluation. The results showed that the four CTOA models were able to determine a constraint independent CTOA value for stable crack growth in the SENB specimens. As a result, a single, reliable, constant CTOA value could be determined regardless of the specimen geometry or the crack-tip constraint conditions. Therefore, the CTOA measured using ASTM E3039 is constraint-independent and transferable to use in cases of actual cracks propagating in gas transmission pipelines.

36 MATERIALS SCIENCE↗

A PROTOSOLAR NEBULA ORIGIN FOR THE ICES AGGLOMERATED BY COMET 67P/CHURYUMOV–GERASIMENKO

The nature of the icy material accreted by comets during their formation in the outer regions of the protosolar nebula (PSN) is a major open question in planetary science. Some scenarios of comet formation predict that these bodies agglomerated from crystalline ices condensed in the PSN. Concurrently, alternative scenarios suggest that comets accreted amorphous ice originating from the interstellar cloud or from the very distant regions of the PSN. On the basis of existing laboratory and modeling data, we find that the N{sub 2}/CO and Ar/CO ratios measured in the coma of the Jupiter-family comet 67P/Churyumov–Gerasimenko by the Rosetta Orbiter Spectrometer for Ion and Neutral Analysis instrument on board the European Space Agency’s Rosetta spacecraft match those predicted for gases trapped in clathrates. If these measurements are representative of the bulk N{sub 2}/CO and Ar/CO ratios in 67P/Churyumov–Gerasimenko, it implies that the ices accreted by the comet formed in the nebula and do not originate from the interstellar medium, supporting the idea that the building blocks of outer solar system bodies have been formed from clathrates and possibly from pure crystalline ices. Moreover, because 67P/Churyumov–Gerasimenko is impoverished in Ar and N{sub 2}, the volatile enrichments observed in Jupiter’s atmosphere cannot be explained solely via the accretion of building blocks with similar compositions and require an additional delivery source. A potential source may be the accretion of gas from the nebula that has been progressively enriched in heavy elements due to photoevaporation.

79 ASTRONOMY AND ASTROPHYSICS↗

Findings of the African Combustion Aerosol Collaborative Intercomparison Analysis (ACACIA) Pilot Project to Understand the Optical Properties of Biomass Burning Smoke

Africa is a critical source of biomass burning (BB) aerosols, and its importance is increasing. The African Combustion Aerosol Collaborative Intercomparison Analysis (ACACIA) Pilot Project set to optically characterize BB aerosol generated from sub-Saharan African fuels. We used a photoacoustic spectrometer as a reference instrument to determine the multiple-scattering correction factor C λ for an AE33 aethalometer at three wavelengths, which produced weighted mean values of C 370 =3.69, C 470 =5.65, and C 520 =6.39. C λ increased with wavelength and C 370 was statistically independent of the others, suggesting a single C λ is insufficient, especially in BB scenarios. While a dependence of C λ on burning state was not found, C λ was shown to strongly relate to particle single scattering albedo (SSA, ω). When Cλ was plotted against SSA, values slowly rose at low SSA values, followed by a sharp rise around an SSA of ∼ 0.9; indicating a larger correction needed for less absorbing aerosol. A number of functions operating on either SSA or C λ were explored and the best function was -C λ /(1-C λ )=Aω+B. This is an important parametrization of C λ specifically geared towards BB aerosol from African fuels under different aging states, and is of particular importance for future field work in that continent. An Ångström matrix plot shows that African BB aerosol can have values more akin to dust, which demonstrates that these fuels are distinct in their wavelength dependence from more typical BB aerosol. Lastly, we examined the mass extinction and absorbance cross sections for BB aerosol generated for the same fuels with two different tube furnace setups. Not only is this combustion method flexible, it was found to be reproducible between labs.

47 OTHER INSTRUMENTATION↗

MSD CoP Webinar: Metrics for Human Wellbeing

Context: This webinar was hosted by the MultiSector Dynamics Community of Practice (MSD CoP; https://multisectordynamics.org). Abstract: Human well-being is an inherently multidimensional concept that broadly refers to what constitutes the "good life". Characterizing well-being requires a wide range of measures of quality of life. Taken together, these can provide a description of well-being and better guide decision making. In this webinar, our panel will first summarize the key themes and recommendations of interdisciplinary conversations that occurred during the course of a two-day, in-person workshop convened by PNNL September 27-28, 2023, which laid the foundations for a new research direction of well-being science and application. Next, they will present research exploring several dimensions of human well-being and their links to equity: energy security, food security, and economic measures. Finally, we will introduce the new Equity Working Group, gather community input to inform its activities, and provide avenues for ongoing engagement. Presenters : Stephanie Waldhoff (Joint Global Change Research Institute, Pacific Northwest National Laboratory; Invited Speaker), Brian O'Neill (Joint Global Change Research Institute, Pacific Northwest National Laboratory; Invited Speaker), Rebecca Saari (University of Waterloo; Co-Chair), Amanda Giang (University of British Columbia; Co-Chair), Sarah Fletcher (Stanford University; Co-Chair), and Matt Sparks (University of Waterloo; Communications Officer) Moderator: Pat M. Reed (MSD CoP Facilitation Team) This webinar was held on: May 29, 2024 from 1-2:15 PM ET

Equity↗

Nimbus/TOMS Science Data Operations Support

Projected goals include the following: (1) Participate in and provide analysis of laboratory and in-flight calibration of LTV sensors used for space observations of backscattered LTV radiation; (2) Provide support to the TOMS Science Operations Center, including generating instrument command lists and analysis of TOMS health and safety data; (3) Develop and maintain software and algorithms designed to capture and process raw spacecraft and instrument data, convert the instrument output into measured radiance and irradiances, and produce scientifically valid products; (4) Process the TOMS data into Level 1, Level 2, and Level 3 data products; (5) Provide analysis of the science data products in support of NASA GSFC Code 916's research.

Source record↗

Nimbus/TOMS Science Data Operations Support

1. Participate in and provide analysis of laboratory and in-flight calibration of UV sensors used for space observations of backscattered UV radiation. 2. Provide support to the TOMS Science Operations Center, including generating instrument command lists and analysis of TOMS health and safety data. 3. Develop and maintain software and algorithms designed to capture and process raw spacecraft and instrument data, convert the instrument output into measured radiance and irradiances, and produce scientifically valid products. 4. Process the TOMS data into Level 1, Level 2, and Level 3 data products. 5. Provide analysis of the science data products in support of NASA GSFC Code 916's research.

Childs, Jeff↗

Thermal Emission Spectra of Phobos, Vesta, Ceres, and Pallas: A Comparison

Ultraviolet, visual, and near-infrared spectra of Phobos, obtained by Mariner 9 and Viking Orbiters, were interpreted to suggest a compositional similarity with carbonaceous chrondrites. Such a composition would be inconsistent with the moon's origin in the proto-Mars region, as Mars is composed chiefly of differentiated silicates. This interpretation was used to suggest that the moons originated in the main-asteroid belt, with subsequent capture and orbital evolution into their current locations. Interpretations of more recent visual and near-infrared spectra, obtained by Phobos-2 and Mars Pathfinder, have demonstrated that the Phobos spectrum is more similar to spectra of other classes of asteroids and lunar soils. If lunar mare soil is the correct analogy, then such a composition suggests a formation of Phobos from materials similar to that on Mars, i.e. basalts, and would not require a dynamically difficult capture and orbital evolution. During the science phasing orbits of the Mars Global Surveyor mission Thermal Emission Spectrometer (TES) observations of Phobos were acquired at each of four encounters. The spectral variability observed for localized surface regions on Phobos has been previously reported and is greatest near the northern wall of Stickney crater. Interpretation of the thermal infrared spectra of airless bodies, based upon most existing laboratory measurements, is complicated by the absence of interstitial gases on the celestial objects that would act to minimize potential thermal gradients in the upper layers of the surface. As an aid to interpretation of the TES Phobos spectra are compared to telescopic and airborne thermal infrared spectra of asteroids from several classes, including Ceres (G), Pallas (B), and Vesta (V). The asteroid spectra provide a direct analogy to the physical situation encountered at the surface of Phobos, albeit different thermal gradients may exist for each surface. This work is supported by NASA RTOP's 344-30-30-01 and 344-34-21-08.

Roush, Ted↗

Measurements of Oxychlorine species on Mars

Mars landed and orbiter missions have instrumentation capable of detecting oxychlorine phases (e.g. perchlorate, chlorate) on the surface. Perchlorate (~0.6 wt%) was first detected by the Wet Chemistry Laboratory in the surface material at the Phoenix Mars Landing site. Subsequent analyses by the Thermal Evolved Gas Analyser aboard the same lander detected an oxygen release (~465°C) consistent with the thermal decomposition of perchlorate. Recent thermal analysis by the Mars Science Laboratory’s Sample Analysis at Mars instrument has also indicated the presence of oxychlorine phases (up to 1.2 wt%) in Gale Crater materials. Despite being at detectable concentrations, the Chemistry and Mineralogy (CheMin) X-ray diffractometer has not detected oxychlorine phases. This suggests that Gale Crater oxychlorine may exist as poorly crystalline phases or that perchlorate/chlorate mixtures exist, so that individual oxychlorine concentrations are below CheMin detection limits (~1 wt%). Although not initially designed to detect oxychlorine phases, reinterpretation of Viking Gas Chromatography/Mass Spectrometer data also suggest that oxychlorine phases are present in the Viking surface materials. Remote near-infrared spectral analyses by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) instrument indicate that at least some martian recurring slope lineae (RSL) have spectral signatures consistent with the presence of hydrated perchlorates or chlorates during the seasons when RSL are most extensive. Despite the thermal emission spectrometer, Thermal Emission Imaging System, Observatoire pour la Minéralogie, l’Eau, les Glaces et l’Activité and CRISM detection of hundreds of anhydrous chloride (~10–25 vol%) deposits, expected associated oxychlorine phases (>5–10 vol%) have not been detected. Total Cl and oxychlorine data sets from the Phoenix Lander and the Mars Science Laboratory missions could be used to develop oxychlorine versus total Cl correlations, which may constrain oxychlorine concentrations at other locations on Mars by using total Cl determined by other missions (e.g. Viking, Pathfinder, MER and Odyssey). Development of microfluidic or ‘lab-on-a-chip’ instrumentation has the potential to be the next generation analytical capability used to identify and quantify individual oxychlorine species on future landed robotic missions to Mars.

Perchlorate↗