Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINORITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Identification of the limiting factors for high-temperature GaAs, GaInP, and AlGaInP solar cells from device and carrier lifetime analysis

We analyze the temperature-dependent dark saturation current density and open-circuit voltage (VOC) for GaAs, GaInP, and AlGaInP solar cells from 25 to 400 degrees C. As expected, the intrinsic carrier concentration, ni, dominates the temperature dependence of the dark currents. However, at 400 degrees C, we measure VOC that is ~50 mV higher for the GaAs solar cell and ~60-110 mV lower for the GaInP and AlGaInP solar cells compared to what would be expected from commonly used solar cell models that consider only the ni2 temperature dependence. To better understand these deviations, we measure the carrier lifetimes of p-type GaAs, GaInP, and AlGaInP double heterostructures (DHs) from 25 to 400 degrees C using time-resolved photoluminescence. Temperature-dependent minority carrier lifetimes are analyzed to determine the relative contributions of the radiative recombination, interface recombination, Shockley-Read-Hall recombination, and thermionic emission processes. We find that radiative recombination dominates for the GaAs DHs with the effective lifetime approximately doubling as the temperature is increased from 25 degrees C to 400 degrees C. In contrast, we find that thermionic emission dominates for the GaInP and AlGaInP DHs at elevated temperatures, leading to a 3-4x reduction in the effective lifetime and ~40x increase in the surface recombination velocity as the temperature is increased from 25 degrees C to 400 degrees C. These observations suggest that optimization of the minority carrier confinement layers for the GaInP and AlGaInP solar cells could help to improve VOC and solar cell efficiency at elevated temperatures. We demonstrate VOC improvement at 200-400 degrees C in GaInP solar cells fabricated with modified AlGaInP window and back surface field layers.

14 SOLAR ENERGY↗
DOE OSTI2018

Photodissociation dynamics of the simplest alkyl peroxy radicals, CH 3 OO and C 2 H 5 OO, at 248 nm

The photodissociation dynamics of the simplest alkyl peroxy radicals, methyl peroxy (CH 3 OO) and ethyl peroxy C 2 H 5 OO , are investigated using fast beam photofragment translational spectroscopy. A fast beam of CH 3 OO - or C 2 H 5 OO - anions is photodetached to generate neutral radicals that are subsequently dissociated using 248 nm photons. The coincident detection of the photofragment positions and arrival times allows for the determination of mass, translational energy, and angular distributions for both two-body and three-body dissociation events. CH 3 OO exhibits repulsive O loss resulting in the formation of O( 1 D) + CH 3 O with high translational energy release. Minor two-body channels leading to OH + CH 2 O and CH 3 O + O( 3 P) formation are also detected. In addition, small amounts of H + O( 3 P) + CH 2 O are observed and attributed to O loss followed by CH 3 O dissociation. C 2 H 5 OO exhibits more complex dissociation dynamics, in which O loss and OH loss occur in roughly equivalent amounts with O( 1 D) formed as the dominant O atom electronic state via dissociation on a repulsive surface. Minor two-body channels leading to the formation of O 2 + C 2 H 5 and HO 2 + C 2 H 4 are also observed and attributed to a ground state dissociation pathway following internal conversion. Additionally, C 2 H 5 OO dissociation yields a three-body product channel, CH 3 + O( 3 P) + CH 2 O, for which the proposed mechanism is repulsive O loss followed by the dissociation of C 2 H 5 O over a barrier. These results are compared to a recent study of tert-butyl peroxy (t-BuOO) in which 248 nm excitation results in three-body dissociatio n and ground state two-body dissociation but no O( 1 D) production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

High p-type doping, mobility, and photocarrier lifetime in arsenic-doped CdTe single crystals

Here, Group-V element doping is promising for simultaneously maximizing the hole concentration and minority carrier lifetime in CdTe for thin film solar cells, but there are roadblocks concerning point defects including the possibility of self-compensation by AX metastability. Herein, we report on doping, lifetime, and mobility of CdTe single crystals doped with As between 10 16 and 10 20 cm –3 grown from the Cd solvent by the travelling heater method. Evidence consistent with AX instability as a major contributor to compensation in samples doped below 10 17 cm –3 is presented, while for higher-doped samples, precipitation of a second phase on planar structural defects is also observed and may explain spatial variation in properties such as lifetime. Rapid cooling after crystal growth increases doping efficiency and mobility for times up to 20–30 days at room temperature with the highest efficiencies observed close to 45% and a hole mobility of 70 cm 2 /Vs at room temperature. A doping limit in the low 10 17 /cm 3 range is observed for samples quenched at 200–300 °C/h. Bulk minority carrier lifetimes exceeding 20 ns are observed for samples doped near 10 16 cm –3 relaxed in the dark and for unintentionally doped samples, while a lifetime of nearly 5 ns is observed for 10 18 cm –3 As doping. These results help us to establish limits on properties expected for group-V doped CdTe polycrystalline thin films for use in photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2018

The charge exchange recombination spectroscopy diagnostic on the upgraded Lithium Tokamak eXperiment (LTX-β)

The Lithium Tokamak eXperiment has undergone an upgrade to LTX-β, a major part of which is the addition of neutral beam injection (NBI). NBI has allowed for a new charge exchange recombination spectroscopy (CHERS) system to be installed in order to measure impurity concentrations, ion temperature, and toroidal velocity. Previously on LTX measuring these parameters relied on passive spectroscopy and inversion techniques and had large uncertainty. The CHERS system has 52 total views, split into four groups of 13, half facing toward the beam and half symmetrically facing away from the beam, so the background non-beam related emission can be simultaneously subtracted. Both sets of views sample a major radius of 27-59 cm, with resolution through the beam of 1.5-2.5 cm. LTX-β is expected to have its magnetic axis near 35 cm, with minor radii of 18-23 cm. Three separate spectrometers will be used for the diagnostic, giving the system great flexibility to simultaneously measure emission from multiple impurity lines. The viewing optics are f/1.8, allowing all of the spectrometers to be fully illuminated. Design and calibration of the system as well as the advantages of various configurations of the spectrometers will be highlighted.

Elliott, Drew↗
DOE OSTI2018

Importance of microstructural features in mechanical response of cast-cured HMX formulations

We report that cast-cure formulations of plastic-bonded explosives (PBX) present some advantages in manufacturing and application compared to traditional pressed slurry formulated materials. For example, these formulations can be cast to specific shapes and then cured in place, avoiding the need for machining precision parts. However, the microstructure of these materials can be greatly affected by the specific manufacturing process. Here, we evaluate the effect of minor changes to the formulation and manufacturing process on several cyclotetramethylene-tetranitramine (HMX) PBXs. The binders were based on hydroxyl-terminated polybutadiene (HTPB) and cast-cured using diphenylmethane diisocyanate (isonate) as a curing agent. We examined the materials using X-ray computed tomography (CT) imaging and uniaxial compression testing. The isonate content was found to significantly affect the modulus and strength of the binder. The presence of significant void content could be controlled by adding a centrifuging step during the curing process, but the resulting effect on mechanical properties was relatively minor. Finally, mesoscale simulations showed that differences in the mechanical strength of the binder were not sufficient to describe the differences observed in mechanical testing, indicating that the HMX-binder adhesion was also being changed by the manufacturing process.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Reactor design and integration with product detection to accelerate screening of electrocatalysts for carbon dioxide reduction

Identifying new catalyst materials for complex reactions such as the electrochemical reduction of CO 2 poses substantial instrumentation challenges due to the need to integrate reactor control with electrochemical and analytical instrumentation. Performing accelerated screening to enable exploration of a broad span of catalyst materials poses additional challenges due to the long time scales associated with accumulation of reaction products and the detection of the reaction products with traditional separation-based analytical methods. The catalyst screening techniques that have been reported for combinatorial studies of (photo)electrocatalysts do not meet the needs of CO 2 reduction catalyst research, prompting our development of a new electrochemical cell design and its integration to gas and liquid chromatography instruments. To enable rapid chromatography measurements while maintaining sensitivity to minor products, the electrochemical cell features low electrolyte and head space volumes compared to the catalyst surface area. Additionally, the cell is operated as a batch reactor with electrolyte recirculation to rapidly concentrate reaction products, which serves the present needs for rapidly detecting minor products and has additional implications for enabling product separations in industrial CO 2 electrolysis systems. To maintain near-saturation of CO 2 in aqueous electrolytes, we employ electrolyte nebulization through a CO 2 -rich headspace, achieving similar gas-liquid equilibration as vigorous CO 2 bubbling but without gas flow. The instrument is demonstrated with a series of electrochemical experiments on an Au-Pd combinatorial library, revealing non-monotonic variations in product distribution with respect to catalyst composition. The highly integrated analytical electrochemistry system is engineered to enable automation for rapid catalyst screening as well as deployment for a broad range of electrochemical reactions where product distribution is critical to the assessment of catalyst performance.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Spontaneous multi-keV electron generation in a low-RF-power axisymmetric mirror machine

X-ray emission reflects the existence of multikilo-electron-volt electrons in low-temperature, low-power, capacitively coupled RF-heated magnetic-mirror plasmas that also contain a warm (300 eV) minority electron population. Though these warm electrons are initially passing particles, we imply that collisionless scattering—μ nonconservation in the static vacuum field—is responsible for a minority of them to persist in the mirror cell for thousands of transits during which time a fraction is energized to a characteristic temperature of 3 keV, with some electrons reaching energies above 30 keV. A heuristic model of the heating by a Fermi-accelerationlike mechanism is shown, with μ nonconservation in the static vacuum field as an essential feature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Geodesic modes driven by untrapped resonances of NB energetic ions in tokamaks

Geodesic modes are typically excited by a minor concentration of energetic ions, but unstable mode frequencies are substantially different from Geodesic Acoustic Modes (GAMs) and are named EGAM (Energetic particle GAM). The EGAM instability driven by Neutral Beam Injection (NBI) has been observed in DIII-D tokamak experiments. The problem of the geodesic mode instability is analytically studied using a full drift kinetic equation. To analyze the instability condition, an ionization NBI location is assumed to be on the high field side of tokamaks. Here, a minority NBI ion distribution is modeled by an energetic ion tail in the untrapped-passing region that remains between a magnetic axis and the trapped NBI boundary. The EGAM instability condition is defined by the parallel NBI ion velocity v | | ≈ ( 1.2 – 1.5 ) ω R 0 q 0 that has to be above the effective EGAM phase velocity. In this case, the EGAM frequency is ≈ 50 % below the standard stable GAM frequency, which is reduced by a small concentration of energetic NBI ions. Qualitative comparison of the developed geodesic mode theory with NBI heating experiments in the midregion of the tokamak plasma is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Defect-mediated metastability and carrier lifetimes in polycrystalline (Ag,Cu)(In,Ga)Se 2 absorber materials

Using a combination of optical and electrical measurements, we develop a model for metastable defects in Ag-alloyed Cu(In,Ga)Se 2 , one of the leading thin film photovoltaic materials. By controlling the pre-selenization conditions of the back contact prior to the growth of polycrystalline (Ag,Cu)(In,Ga)Se 2 absorbers and subsequently exposing them to various stresses (light soaking and dark-heat), we explore in this paper the nature and role of metastable defects on the electro-optical and photovoltaic performance of high-efficiency solar cell materials and devices. Positron annihilation spectroscopy indicates that dark-heat exposure results in an increase in the concentration of the selenium–copper divacancy complex (V Se –V Cu ), attributed to depassivation of donor defects. Deep-level optical spectroscopy finds a corresponding increase of a defect at Ev+0.98 eV, and deep-level transient spectroscopy suggests that this increase is accompanied by a decrease in the concentration of mid-bandgap recombination centers. Time-resolved photoluminescence excitation spectroscopy data are consistent with the presence of the V Se –V Cu divacancy complex, which may act as a shallow trap for the minority carriers. Light-soaking experiments are consistent with the V Se –V Cu optical cycle proposed by Lany and Zunger, resulting in the conversion of shallow traps into recombination states that limit the effective minority carrier recombination time (and the associated carrier diffusion length) and an increase in the doping density that limits carrier extraction in photovoltaic devices.

14 SOLAR ENERGY↗
DOE OSTI2020

Photodissociation dynamics of the tert -butyl perthiyl radical

Here, the photodissociation dynamics of the tert-butyl perthiyl (t-BuSS) radical are investigated by fast-beam coincidence translational spectroscopy. A fast (6 keV-8 keV) beam of neutral t-BuSS radicals is produced via photodetachment of the corresponding anion, followed by photodissociation at 248 nm (5.00 eV) or 193 nm (6.42 eV) and coincident detection of the neutral products. Photofragment mass and translational energy distributions are obtained at both wavelengths. At 248 nm, the dominant product channel (90%) is found to be S loss, with a product translational energy distribution that peaks close to the maximum available energy and an anisotropic photofragment angular distribution, indicating dissociation along a repulsive excited state. A minor channel (10%) leading to the formation of S 2 + t-Bu is also observed. At 193 nm, both two- and three-body dissociation are observed. The formation of S 2 + t-Bu is the dominant two-body product channel, with multiple electronic states of the S 2 molecule produced via excited-state dissociation processes. The formation of S + t-BuS is a minor two-body channel at this dissociation energy. The three-body channels are S 2 + H + isobutene, S 2 + CH 3 + propene, and S + SH + isobutene. The first two of these channels result from a sequential dissociation process in which the loss of S 2 from t-BuSS results in ground-state t-Bu with sufficient internal energy to undergo secondary fragmentation. The third three-body channel, S + SH + isobutene, is attributed to the loss of internally excited HS 2 from t-BuSS, which then rapidly dissociates to form S + SH in an asynchronous concerted dissociation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Looking at the bigger picture: Identifying the photoproducts of pyruvic acid at 193 nm

Here, photodissociation of pyruvic acid (PA) was studied in the gas-phase at 193 nm using two complementary techniques. The time-sliced velocity map imaging arrangement was used to determine kinetic energy release distributions of fragments and estimate dissociation timescales. The multiplexed photoionization mass spectrometer setup was used to identify and quantify photoproducts, including isomers and free radicals, by their mass-to-charge ratios, photoionization spectra, and kinetic time profiles. Using these two techniques, it is possible to observe the major dissociation products of PA photodissociation: CO 2 , CO, H, OH, HCO, CH 2 CO, CH 3 CO, and CH 3 . Acetaldehyde and vinyl alcohol are minor primary photoproducts at 193 nm, but products that are known to arise from their unimolecular dissociation, such as HCO, H 2 CO, and CH 4 , are identified and quantified. A multivariate analysis that takes into account the yields of the observed products and assumes a set of feasible primary dissociation reactions provides a reasonable description of the photoinitiated chemistry of PA despite the necessary simplifications caused by the complexity of the dissociation. These experiments offer the first comprehensive description of the dissociation pathways of PA initiated on the S 3 excited state. Most of the observed products and yields are rationalized on the basis of three reaction mechanisms: (i) decarboxylation terminating in CO 2 + other primary products (~50%); (ii) Norrish type I dissociation typical of carbonyls (~30%); and (iii) O—H and C—H bond fission reactions generating the H atom (~10%). The analysis shows that most of the dissociation reactions create more than two products. This observation is not surprising considering the high excitation energy (~51 800 cm –1 ) and fairly low energy required for dissociation of PA. We find that two-body fragmentation processes yielding CO 2 are minor, and the expected, unstable primary co-fragment, methylhydroxycarbene, is not observed because it probably undergoes fast secondary dissociation and/or isomerization. Norrish type I dissociation pathways generate OH and only small yields of CH 3 CO and HOCO, which have low dissociation energies and further decompose via three-body fragmentation processes. Experiments with d 1 -PA (CH 3 COCOOD) support the interpretations. The dissociation on S 3 is fast, as indicated by the products’ recoil angular anisotropy, but the roles of internal conversion and intersystem crossing to lower states are yet to be determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Incorporation of GTR (generation–transport–recombination) in semiconductor simulations

With the emergence of phase change memory, where the devices experience extreme thermal gradients (~100 K/nm) during transitions between low and high resistive states, the study of thermoelectric effects at small scales becomes particularly relevant. We had earlier observed asymmetric melting of self-heated nano-crystalline silicon micro-wires, where current densities of ~10 7 A/cm 2 were forced through the wires by 1 μs, ~30 V pulses. The extreme asymmetry can be explained by the generation of considerable amount of minority carriers, transport under the electric field, and recombination downstream, a heat transfer process we termed as generation–transport–recombination, which is in opposite direction of the electronic-convective heat carried by the majority carriers. Here, we present a full semiconductor physics treatment of this carrier-lattice heat transport mechanism and the contribution of the minority carriers on the evolution of the melt–solid interface, which can be applied to various high-temperature electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Determining the electrical conductivity of metals using the 2 MA Thor pulsed power driver

We present the development of a pulsed power experimental technique to infer the electrical conductivity of metals from ambient to high energy density conditions. The method is implemented on Thor, a moderate scale (1–2 MA) pulsed power driver. The electrical conductivity of copper at elevated temperature (>4000 K) and pressure (>10 GPa) is determined, and a new tabular material model is developed, guided by density functional theory, which preserves agreement with existing experimental data. Minor modifications (<10%) are found to be necessary to the previous Lee–More–Desjarlais model isotherms in the vicinity of the melt transition in order to account for observed discrepancies with the new experimental data. An analytical model for magnetic direct drive flyer acceleration and Joule heating induced vaporization based on the Tsiolkovsky “rocket equation” is presented to assess sensitivity of the method to minor changes in electrical conductivity.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Transition from ITG to MTM linear instabilities near pedestals of high density plasmas

Here, investigation of linear gyrokinetic ion-scale modes ( k θ ρ s = 0.3) finds that a transition from ion temperature gradient to microtearing mode (MTM) dominance occurs as the density is increased near the pedestal region of a parameterized DIII-D sized tokamak. H-modes profile densities, temperatures, and equilibria are parameterized utilizing the OMFIT PRO_create module. With these profiles, linear gyrokinetic ion-scale instabilities are predicted with CGYRO. This transition (nMTM) has a weak dependence on radial location in the region near the top of the pedestal ( ρ = 0.7 – 0.9), which allows simulating single radii to examine the approximate scaling of nMTM with global parameters. The critical nMTM is found to scale with plasma current. Additionally, increasing the minor radius by decreasing the aspect ratio and increasing the major radius are found to reduce nMTM. However, any relationship between nMTM and density limit physics remains unclear as nMTM increases relative to the Greenwald density with larger minor radius and with larger magnetic field, suggesting that the transport due to MTM may be less important for a reactor. Additionally, nMTM is sensitive to the pedestal temperature, the local electron and ion gradients, the ratio of ion to electron temperature T i / T e, and the current profile. MTMs are predicted to be the dominant instability in the core at similar Greenwald fractions for DIII-D, NSTX, and NSTX-U H-mode experiments, supporting the results of the parameterized study. Additionally, MTMs continue to be the dominant linear instability in a DIII-D L-mode after an H–L transition as the plasma approaches a density limit disruption despite the large change in plasma profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Electronic, magnetic, and structural properties of CoVMnSb: Ab initio study

We present computational results on electronic, magnetic, and structural properties of CoVMnSb, a quaternary Heusler alloy. Our calculations indicate that this material may crystallize in two energetically close structural phases: inverted and regular cubic. The inverted cubic phase is the ground state, with ferrimagnetic alignment, and around 80% spin polarization. Despite having a relatively large bandgap in the minority-spin channel close to the Fermi level, this phase does not undergo a half-metallic transition under pressure. This is explained by the “pinning” of the Fermi level at the minority-spin states at the Γ point. At the same time, the regular cubic phase is half-metallic and retains its perfect spin polarization under a wide range of mechanical strain. Transition to a regular cubic phase may be attained by applying uniform pressure (but not biaxial strain). In practice, this pressure may be realized by an atomic substitution of non-magnetic atoms (Sb) with another non-magnetic atom (Si) of a smaller radius. Our calculations indicate that 25% substitution of Sb with Si results in a half-metallic regular cubic phase being the ground state. In addition, CoVMnSb0.5Si0.5 retains its half-metallic properties under a considerable range of mechanical pressure, as well as exhibits thermodynamic stability, thus making this alloy attractive for potential spintronic applications. We hope that the presented results will stimulate experimental efforts to synthesize this compound.

Physics↗
DOE OSTI2024

The motional Stark effect diagnostic for ITER

An overview of the plans for the motional Stark effect (MSE) diagnostic installation on the International Thermonuclear Experimental Reactor (ITER) is presented. The MSE diagnostic uniquely provides spatially localized magnetic field measurements inside the plasma. These are used to constrain equilibrium reconstructions to determine q(r), the safety factor as a function of minor radius. Meeting the system requirements to deliver q-profiles and related quantities with the specified radial resolution of 20 points over the minor radius, 10 ms time resolution, and better than 10% accuracy is challenging. MSE systems observe the D/H-α emission near 656.3 nm from neutral beams. As the beam atoms traverse the magnetic field, B⃗, at high velocity, v⃗, they experience a Lorentz electric field, v⃗×B⃗, which causes the spectral emission to be split and polarized due to the Stark effect. Traditional MSE-LP (line polarization) measurements determine the direction of the magnetic field in the observation volume using polarimetric analysis of the detected light. The harsh conditions of ITER are expected to deposit thin films of contaminants on the first mirror, which would alter the polarization state of reflected light significantly. On ITER, the combination of high magnetic field strength and high energy beams makes the Stark spectrum resolution suitable for the determination of the magnetic field magnitude from the line shift, so this approach has been selected. Every aspect of the measurement system must be planned for the burning plasma environment and carefully analyzed ahead of time. Current status and plans for the system are presented.

Instruments & Instrumentation↗
DOE OSTI2025

Prevention of resistive wall tearing mode major disruptions with feedback

Resistive wall tearing modes (RWTMs) can cause major disruptions. A signature of RWTMs is that the rational surface is sufficiently close to the wall to interact with it. For (m,n) = (2,1) modes, a RWTM requires normalized minor radius of the rational surface ρ q2 ≥ 0.75, which can also be expressed as q 75 ≤ 2. Major disruptions can occur when the criterion is satisfied. This is confirmed in simulations and theory and in a DIII-D locked mode disruption database. The q 75 < 2 criterion is valid at high β as well as at low β. A very important feature of RWTMs is that they can be feedback stabilized. If the ρ q2 criterion is not satisfied, or if the wall is ideally conducting, then the mode does not produce a major disruption, although it can produce a minor disruption. Feedback, or rotation of the mode at the wall by complex feedback, can emulate an ideal wall, preventing major disruptions. The ρ q2 criterion depends weakly on the wall radius. A simple geometric model of its dependence on wall radius is given.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Comparison of time-resolved photoluminescence and deep-level transient spectroscopy defect evaluations in an InAs nBn detector subjected to in situ and ex situ 63 MeV proton irradiation

Deep-level transient spectroscopy and temperature-dependent time-resolved photoluminescence experiments are performed on identical InAs nBn photodetector structures as a function of in situ and ex situ 63 MeV proton irradiation to assess their generation and recombination dynamics. Pre-irradiation, the n-type InAs absorbing region, exhibits a steadily increasing minority carrier lifetime with increasing temperature, providing evidence that excited minority carriers may be recombining via shallow defect levels. From deep-level transient spectroscopy, two features are found between 10 and 275 K: a low temperature broad “shoulder,” which suggests emission from multiple shallow electron defect levels with energies <29 meV and a high temperature minimum occurring at ∼230 K with an activation energy of 539 meV, which suggests a defect in the barrier layer in the device. Two similar nBn detectors are then subjected to 63 MeV proton irradiation in step doses and measured between steps. One experiment is performed in situ with an nBn held at ∼10 K during dosing, and the other experiment is performed ex situ with a similar nBn held at room temperature for dosing. The ex situ dosing results in an evaluation of the defect introduction rate that is three to four times lower than in situ due to partial annealing of the proton-induced displacement damage at room temperature. The results of these two experiments are then compared with the dose-dependent recombination rate analysis, resulting in an estimated recombination defect cross section of 1.6 × 10 −13 cm 2 for the shallow shoulder defect.

Carrasco, Rigo A. [Air Force Research Laboratory (↗