Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Results of analyses performed on basalt adjacent to penetrators emplaced into volcanic rock at Amboy, California, April 1976

The physical and chemical modifications found in the basalt after impact of four penetrators were studied. Laboratory analyses show that mineralogical and elemental changes are produced in the powdered and crushed basalt immediately surrounding the penetrator. Optical microscopy studies of material next to the skin of the penetrator revealed a layer, 0-2 mm thick, of glass and abraded iron alloy mixed with fractured mineral grains of basalt. Elemental analysis of the 0-2 mm layer revealed increased concentrations of Fe, Cr, Ni, No, and Mn, and reduced concentrations of Mg, Al, Si, and Ca. The Fe, Cr, Ni, and Mo were in fragments abraded from the penetrator. Mineralogical changes occurring in the basalt sediment next to the penetrator include the introduction of micron-size grains of alpha-iron, magnetite, and hematite. The newly formed silicate minerals include metastable phases of silica (tridymite and cristobalite). An increased concentration of Fe, Cr, Ni, and Mo occurred in the 2-mm to 1-cm layer of penetrator no. 1, which impacted at the highest velocity. No elemental concentration increase was noted for penetrators nos. 2 and 3 in the 2-mm to 1-cm layer. Contaminants introduced by the penetrator occur up to 1 cm away from the penetrator's skin. Although volatile elements do migrate and new minerals are formed during the destruction of host minerals in the crushed rock, no changes were observed beyond the 1-cm distance.

Blanchard, M.↗

Shock metamorphic effects in lunar microcraters

Detailed petrographic descriptions and results of electron microprobe analyses are presented for impact glasses as well as shocked and unshocked minerals associated with individual lunar microcraters (diameters of 0.4 to 4.4 mm). Rocks of four typical lunar lithologies are studied: anorthosite, anorthositic norite, ophitic basalt, and polymict breccia. Textures, mineralogies, and chemical compositions are examined along a radial traverse through each microcrater; i.e., across the impact glasses lining the crater wall, the shock-metamorphosed zone immediately underlying the glass liner, and the unshocked host rock. The microcraters are discussed in a sequence of increasing mineralogical complexity of the host rock (from anorthosite to polymict breccia) in order to distinguish shock effects among mineral types. The shock metamorphic features observed are found to be comparable to those reported in shocked basalt from Lonar Crater, India, and are categorized into five shock-intensity classes with pressures experimentally calibrated.

Schaal, R. B.↗

Petrology and origin of Boulders no. 2 and no. 3, Apollo 17 Station 2

The paper presents petrographic and mineralogical data for five samples from Boulder 2 (72315, 72335, 72355, 72375, and 72395) and sample 72435 from Boulder 3 at Apollo 17 Station 2. All the samples were found to consist of a few percent megaclasts set in a fine-grained matrix, which is comprised of microclasts and a poikilitic to subophitic-textured groundmass that crystallized from a melt. The samples have similar modal mineralogies, mineral compositions, and bulk-chemical compositions.

Dymek, R. F.↗

The application of Fourier transform spectroscopy to the remote identification of solids in the solar system

The techniques of Fourier transform spectroscopy combined with large aperture telescopes and advances in detector technology now permit infrared (at a wavelength greater than 1 micron) observations of the surfaces of small solar system objects such as asteroids and satellites. The results demonstrate that this activity can produce important new compositional information related to the origin and evolution of the solar system. The detection of water ice in Saturn's rings and on some of the satellites of Jupiter and Saturn confirm expectations that ices are important mineralogical components in the chemistry of the outer solar system. More recent studies of the mineralogical composition of the surfaces of asteroids provide a new observational link to the origin of meteorites and the early thermal history of the solar system. These results have been dependent upon supporting laboratory studies of the spectral behavior of ices and minerals to define the potential, and limitations, of the method. Since many of the astronomical observations have been exploratory in nature, prospects are good that continued refinement of the techniques will lead to additional insights.

Larson, H. P.↗

Infrared observations of asteroids from earth and space

Infrared reflectances at wavelength between 1 and 4 micrometers are used for determining asteroid surface mineralogy, surface composition, diameters, and albedos. Thermal models were developed for analyzing infrared observations at longer wavelengths. The discovery of a spectral feature due to water of hydration on Ceres seems to contradict the mineralogy inferred from spectrophotometry.

Matson, D. L.↗

Petrology of crystalline matrix breccias from Apollo 17 rake samples

The petrology, mineralogy, and composition of 13 crystalline matrix breccias from the Apollo 17 rake samples are described. The breccias have matrices of uniform modal mineralogy (plagioclase, 50-54%; olivine and pyroxene, 41-46%) but diverse textures. Clast characteristics, including the proportion of plagioclase, the composition in comparison with matrix, and the textures of different clast types, are reported. The majority of bulk matrix compositions plot on or very near the plagioclase-olivine cotectic in the system olivine-anorthite-silica. If the matrix compositions represent impact total melts, the inferred cotectic control requires that the source material was itself an igneous differentiate with compositions along the plagioclase-olivine cotectic. Alternatively, the proximity of the matrix compositions to the plagioclase-olivine cotectic could be accounted for if the breccia matrices represent a suite of impact-generated partial melts.

Warner, R. D.↗

Infrared spectroscopy of simulated Martian surface materials

Mineralogy inferred from the Viking X-ray fluorescence spectrometry (XRFS) is compared with mineralogy indicated by spectral data. The comparison is done by taking laboratory spectra of Viking analog minerals. Both XRFS and infrared data are consistent with clays as the dominant SiO2 containing minerals on Mars. The X-ray fluorescence data might also be consistent with the dominance of certain mafic SiO2 igneous minerals, but the spectral data are probably inconsistent with such materials. Sulfates, inferred by XRFS, are consistent with the spectral data. Inferences following Mariner 9 that high-SiO2 minerals were important on Mars may have been biased by the presence of sulfates. Calcium carbonate, in the quantities indirectly suggested by XRFS are inconsistent with the spectral data, but smaller quantities of CaCO3 are consistent, as are large quantities of other carbonates.

Toon, O. B.↗

Petrographic and petrological studies of lunar rocks

Thin sections and polished electron probe mounts of Apollo 15 glasscoated breccias 15255, 15286, 15466, and 15505 were examined optically and analyzed by sem/microprobe. Sections from breccias 15465 and 15466 were examined in detail, and chemical and mineralogical analyses of several larger lithic clasts, green glass, and partly crystallized green glass spheres are presented. Area analyses of 33 clasts from the above breccias were also done using the SEM/EDS system. Mineralogical and bulk chemical analyses of clasts from the Apollo 15 glass-coated breccias reveal a diverse set of potential rock types, including plutonic and extrusive igneous rocks and impact melts. Examination of the chemistry of the clasts suggests that many of these clasts, like those found in 61175, are impact melts. Their variability suggests formation by several small local impacts rather than by a large basin-forming event.

Winzer, S. R.↗

The Moho as a magnetic boundary

Magnetism in the crust and the upper mantle and magnetic results indicating that the seismic Moho is a magnetic boundary are considered. Mantle derived rocks - peridotites from St. Pauls rocks, dunite xenoliths from the Kaupulehu flow, and peridotite, dunite, and eclogite xenoliths from Roberts Victor and San Carlos diatremes - are weakly magnetic with saturation magnetization values from 0.013 emu/gm to less than 0.001 emu/gm which is equivalent to 0.01 to 0.001 wt% Fe304. Literature on the minerals in mantle xenoliths shows that metals and primary Fe304 are absent, and that complex Cr, Mg, Al, and Fe spinels are dominant. These spinels are non-magnetic at mantle temperatures, and the crust/mantle boundary can be specified as a magnetic mineralogy discontinuity. The new magnetic results indicate that the seismic Moho is a magnetic boundary, the source of magnetization is in the crust, and the maximum Curie isotherm depends on magnetic mineralogy and is located at depths which vary with the regional geothermal gradient.

Wasilewski, P. J.↗

Meteoroid ablation spheres from deep-sea sediments

The paper deals with an examination of spheres that are magnetically extracted from mid-Pacific abyssal clays that are up to half a million years old. The spheres are divided into three groups using their dominant mineralogy - namely, iron, glassy, and silicate. Most spheres were formed from particles that completely melted as they separated from their parent meteoroids during the ablation process. It is concluded that the mineralogy and composition of the deep-sea spheres are identical in many respects to the meteorite fusion crusts, laboratory-created ablation debris, and the ablated interplanetary dust particles in the stratospheric collection.

Blanchard, M. B.↗

Cumberland Falls chondritic inclusions - Mineralogy/petrology of a forsterite chondrite suite

The mineralogy and petrology of a suite of chondritic inclusions from the Cumberland Falls aubrite are investigated in order to clarify the relation of the inclusions to each other, forsterite chondrites, and the aubrites. Thin sections of nine chondritic inclusions and the achondritic matrix of Cumberland Falls were examined in reflected light, then analyzed for up to 12 elements by electron microprobe techniques. Minerals detected in abundant quantities include low-Ca pyroxene, olivine, plagioclase, kamacite, taenite, schreibersite, troilite, ferroan alabandite and daubreelite; diospide, oldhamite and a Ti-rich sulfide are found in one or two inclusions. The mineralogic compositions indicate similar degrees of reduction for the inclusions in the Cumberland Falls meteorites and in four meteorites identified as forsterite chondrites (Kakangari, Mt. Morris, Pontlyfni and Winona). The inclusions are found to be of a primitive composition, corresponding to petrological types 2 or 3, while the identification of jadeitic pyroxene in nearly all inclusions indicates a substantial degree of shock. The results suggest that the inclusions formed from nebular material that condensed and accreted over a broad redox range, and experienced tertiary shock in a collision with an enstatite meteorite in which the Cumberland Falls meteorite formed.

Neal, C. W.↗

Lunar and Planetary Science Conference, 12th, Houston, TX, March 16-20, 1981, Proceedings. Section 1 - The moon. Section 2 - Planets, asteroids and satellites

Topics related to the mineralogy and petrology of lunar pristine rocks are considered, along with subjects concerning the mineralogy and geochemistry of lunar breccias. Other studies considered are connected with the lunar regolith, lunar surface geology, and aspects of lunar structure and evolution. Investigations regarding meteorites are reported, and a description is provided of explorations of Mars and Venus, giving attention to regional geology, surface properties, and the composition of Venus. Studies of the Galilean satellites are related to an Io thermal model with intermittent volcanism, the microstructure and particulate properties of the surfaces of Io and Ganymede, the structures on Europa, the sputter-generation of planetary coronae, the tectonic deformation of Galileo Regio and limits to the planetary expansion of Ganymede, and dark-ray craters on Ganymede. Experimental and theoretical studies concerning impact cratering are also considered.

Merrill, R. B.↗

Airborne infrared mineral mapping survey of Marysvale, Utah

Infrared spectroradiometer survey results from flights over the Marysvale, Utah district show that hydrothermal alteration mineralogy can be mapped using very rapid and effective airborne techniques. The system detects alteration mineral absorption band intensities in the infrared spectral region with high sensitivity. The higher resolution spectral features and high spectral differences characteristic of the various clay and carbonate minerals are also readily identified by the instrument allowing the mineralogy to be mapped as well as the mineralization intensity.

Collins, W.↗

The role of geological surfaces in determining visible-near infra red spectral signatures

The goal of the study described here is to determine new criteria for improved target discrimination in areas of hydrothermal mineralization. It is noted that the portion of materials, that is, geological surfaces detected by sensing devices, must be accurately determined before elemental and mineralogical characterization. The depth from which visible-near infrared radiation is reflected from target surfaces depends on composition and fabric. Reflectance spectra are obtained from binary mixtures of hematite, goethite, kaolinite and montmorillonite with a reflecting sphere spectrometer over a wavelength range of 400-2500 nm. The reflection (or absorption) intensity is plotted vs. the sample thickness (determined by scanning electron microscopy) to determine the sample thickness at which absorption saturates. The optical depth is seen to vary as a function of mineralogy and wavelength. In general, the maximum depth from which reflection features are discerned is from 12 to 47 microns measured in the visible-near infrared spectral region.

Sommer, S. E.↗

The Tucson iron and its relationship to enstatite meteorites

The Tucson meteorite was studied in order to search for the origin of its silicates and to explore a possible relationship between Tucson and the enstatite meteorites. All samples were analyzed with an electron microprobe. The silicate inclusions are described in terms of size and texture, and the silicate mineralogy, which is that of a highly reduced assemblage, is described. The bulk composition of the silicate inclusions is discussed. The results provide evidence of fast cooling. The textural and mineralogical data all point to the presence of a high temperature melt followed by rapid cooling and quenching. Several hypotheses for the origin of the Tucson are discussed, and it is concluded that the preferred hypothesis is that the meteorite formed by the high temperature impact mixing of a forsterite-enstatite silicate assemblage with Si-bearing metal, both having formed in a highly reduced environment.

Nehru, C. E.↗

The magma ocean from the Fra Mauro shoreline - An overview of the Apollo 14 crust

Petrographic and mineralogical studies of coarse grained, polymineralic, texturally monominct igneous clasts from the Apollo 14 breccias show troctolite and troctolitic anorthosite to be the most abundant rock types. The second most abundant group consists of plagioclase cumulates with more evolved mineral compositions than the Mg-rich trend anorthosite cumulates. Coarse grained ilmenite gabbros and mineralogically evolved monzonoritic and granitic clasts are widespread in occurrence, but not abundant. The present data provide further support for widespread regional heterogeneities within the early lunar crust.

Hunter, R. H.↗

Transmission electron microscopy of the 'LOW-CA' hydrated interplanetary dust particle

Transmission electron microscopy of a hydrated interplanetary dust particle indicates that it consists largely of a poorly crystalline phyllosilicate containing Fe, Mg and Al with an interlayer spacing of 10 to 12 A and so is distinct from the major phyllosilicate in CI and CM carbonaceous chondrites. The silicate is probably an Fe- and Mg-rich smectite or mica. Submicron, spherical to euhedral pyrrhotite and pentlandite are prominent. Unusual, low-Ni pentlandite is also common and typically occurs as rectangular platelets. Unlike many chondritic interplanetary dust particles, olivine is rare and pyroxene was not observed. Other less abundant phases are magnetite, chromite, and an unidentified phase containing Fe, Mg, Si, Ca, and Mn. This particle differs from a hydrated micrometeorite described previously by Brownlee (1978), indicating there are mineralogically different subsets of hydrated interplanetary dust particles. Despite gross similarities in mineralogy between the particle and the carbonaceous chondrites, they show appreciable differences in detail.

Tomeoka, K.↗