Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Opportunities and Challenges of High-Energy Lithium Metal Batteries for Electric Vehicle Applications

Lithium metal batteries have great advantages over state-of-the-art lithium ion batteries in terms of energy density and cost, which present huge opportunities for long-range and low-cost electric vehicles in the future. However, the automotive industry has critical requirements on specific characteristics of battery cells, including but not limited to cycle life, working temperature range, fast discharge–charge capability, volume change, safety, and so on. In this Focus Review, we discuss both the cell- and system-level requirements and challenges of high-energy-density lithium metal batteries for future electrical vehicle applications and highlight some recent key progress in these aspects. Furthermore, our main objective is to identify key strategies on how to solve these challenges and inspire more research and development effort to accelerate the practical applications of lithium metal batteries.

25 ENERGY STORAGE↗
NASA NTRS1975

The Mariner 10 radio occultation measurements of the ionosphere of Venus

Data from the Mariner 10 radio occultation experiment have been utilized to determine the vertical electron density distribution in the ionosphere of Venus. The ingress measurements, which were made at latitude 1.3 deg N on the nightside of the planet, show two distinct layers. The main layer was located at 142 km altitude and had a peak density of 9000 electrons per cu cm. A secondary layer with a peak density of 7000/cu cm was detected at 124 km altitude. During egress, the ionosphere was probed at latitude 56.0 deg S on the dayside of Venus. The solar zenith angle in this region was 67.0 deg. The dayside ionosphere consisted of a main layer with a peak density of 290,000 per cu cm at 142 km altitude and several minor layers. At the top of the dayside ionosphere, the measurements showed an abrupt drop in the density from 2000 per cu cm at 335 km altitude to below the level of detectability, i.e., less than 200 per cu cm, at 360 km altitude. This abrupt density change may be the ionopause where the solar wind plasma interacts with the ionized components of the atmosphere.

Fjeldbo, G.↗
NASA NTRS1991

Quantitative determination of the mineral distribution in different collagen zones of calcifying tendon using high voltage electron microscopic tomography

High voltage electron microscopic tomography was used to make the first quantitative determination of the distribution of mineral between different regions of collagen fibrils undergoing early calcification in normal leg tendons of the domestic turkey, Meleagris gallopavo. The tomographic 3-D reconstruction was computed from a tilt series of 61 different views spanning an angular range of +/- 60 degrees in 2 degrees intervals. Successive applications of an interactive computer operation were used to mask the collagen banding pattern of either hole or overlap zones into separate versions of the reconstruction. In such 3-D volumes, regions specified by the mask retained their original image density while the remaining volume was set to background levels. This approach was also applied to the mineral crystals present in the same volumes to yield versions of the 3-D reconstructions that were masked for both the crystal mass and the respective collagen zones. Density profiles from these volumes contained a distinct peak corresponding only to the crystal mass. A comparison of the integrated density of this peak from each profile established that 64% of the crystals observed were located in the collagen hole zones and 36% were found in the overlap zones. If no changes in crystal stability occur once crystals are formed, this result suggests the possibilities that nucleation of mineral is preferentially and initially associated with the hole zones, nucleation occurs more frequently in the hole zones, the rate of crystal growth is more rapid in the hole zones, or a combination of these alternatives. All lead to the conclusion that the overall accumulation of mineral mass is predominant in the collagen hole zones compared to overlap zones during early collagen fibril calcification.

NASA Program Space Biology↗
NASA NTRS2011

Energy Storage Technology Development for Space Exploration

The National Aeronautics and Space Administration is developing battery and fuel cell technology to meet the expected energy storage needs of human exploration systems. Improving battery performance and safety for human missions enhances a number of exploration systems, including un-tethered extravehicular activity suits and transportation systems including landers and rovers. Similarly, improved fuel cell and electrolyzer systems can reduce mass and increase the reliability of electrical power, oxygen, and water generation for crewed vehicles, depots and outposts. To achieve this, NASA is developing non-flow-through proton-exchange-membrane fuel cell stacks, and electrolyzers coupled with low permeability membranes for high pressure operation. The primary advantage of this technology set is the reduction of ancillary parts in the balance-of-plant fewer pumps, separators and related components should result in fewer failure modes and hence a higher probability of achieving very reliable operation, and reduced parasitic power losses enable smaller reactant tanks and therefore systems with lower mass and volume. Key accomplishments over the past year include the fabrication and testing of several robust, small-scale non-flow-through fuel cell stacks that have demonstrated proof-of-concept. NASA is also developing advanced lithium-ion battery cells, targeting cell-level safety and very high specific energy and energy density. Key accomplishments include the development of silicon composite anodes, lithiatedmixed- metal-oxide cathodes, low-flammability electrolytes, and cell-incorporated safety devices that promise to substantially improve battery performance while providing a high level of safety.

Mercer, Carolyn R.↗
DOE OSTI2021

Accurate Thermochemistry of Complex Lignin Structures via Density Functional Theory, Group Additivity, and Machine Learning

A molecular-level understanding of lignin structures and bond dissociation energies could facilitate depolymerization technologies. Still, this information is currently limited due to the lack of databases and the simplification of surrogate models. Here, substitution effects on seven common linkages in lignin polymers are systematically investigated. An automated reaction network generator is employed to create a database of structures. A new group additivity (GA) model based on principal component analysis (PCA) descriptors is introduced and trained on gas-phase density functional theory data of 4100 species at the M06-2X/6-311++G(d,p) level. Hydrogen bonds, local steric, and nonaromatic ring contributions are also incorporated. Lastly, we improve the accuracy of the group additivity model to reach the G4 theory by computing a data set of 770 species at this level and using a data fusion approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

The effect of wave-particle interactions on the polar winds O(+)

The escape of the polar wind plasma is an important element in the ionosphere-magnetosphere coupling. Both theory and observations indicate that the wave-particle interactions (WPI) play a significant role in the dynamics of ion outflow along open geomagnetic field lines. A Monte Carlo simulation was developed in order to include the effect of the WPI in addition to the factors that are traditionally included in the 'classical' polar wind (i.e. gravity, electrostatic field, and divergence of geomagnetic field lines). The ion distribution function (f(sub j)), as well as the profiles of its moments (density, drift velocity, temperature, etc.) were found for different levels of WPI, that is, for different values of the normalized diffusion rate in the velocity space (D(tilde) (sub j perpendicular). Although the model included O(=), H(+) and eletrons, we presented only the results related to the O(+) ion. We found that (1) both the density and drift velocity of O(+) increased with the WPI strength, and consequently, the O(+) escape flux was enhanced by a factor of up to 10(exp 5), (2) The O(+) ions could be energized up to a few electron volts; (3) for moderate and high levels of WPI D(tilde) (sub perpendicular) (O(+) greater than (tilde) 1, the distribution function f(O(+)) displayed very pronounced conic features at altitudes around 3 R(sub e). Finally, the interplay between the downward body force, the upward mirror force, and the perpendicular heating resulted in the formation of the 'pressure cooker' effect. This phenomena explained some interesting features of our solution, such as, the peak in the O(=) temperature, and the formation of 'ears' and conics for f(O(+)) around 2.5 R(sub e).

Barakat, A. R.↗
NASA NTRS1994

The effect of wave-particle interactions on the polar wind: Preliminary results

A Monte Carlo simulation was developed in order to study the effects of wave-particle interactions (WPI) on the plasma outflow in the polar wind. The simulation also considered the other mechanisms included in the `classical' polar wind studies such as gravity, the polarization electrostatic field, and the divergence of geomagnetic field lines. Although the plasma consisted of electrons, H(+) and O(+) ions, we emphasized the behavior of H(+) in this preliminary study. The ion distribution function, as well as the profiles of its moments (density, drift velocity, temperatures, etc.) were found for different levels of WPI, that is, for different values of normalized diffusion rates in the velocity space (normalized D(sub perpendicular) H(+)). We found that as the WPI strength increases: (1) the ion drift velocity increases and its density decreases; (2) the perpendicular temperature T(sub perpendicular) (H(+)) increases; (3) the parallel temperature T(sub parallel) (H(+)) first decreases and then increases due to the balance between the parallel adiabatic cooling and the transfer of the energy from the perpendicular to the parallel direction; and (4) the temperature anisotropy ((T(sub parallel) (H(+))/T(sub perpendicular) (H(+)) is reduced and even reversed in some cases. For strong WPI (normalized D(sub perpendicular) (H(+) much greater than 1), the ion distribution function shows weak conic features at high altitudes.

Barakat, A. R.↗
NASA NTRS2011

Energy Storage Project

NASA's Exploration Technology Development Program funded the Energy Storage Project to develop battery and fuel cell technology to meet the expected energy storage needs of the Constellation Program for human exploration. Technology needs were determined by architecture studies and risk assessments conducted by the Constellation Program, focused on a mission for a long-duration lunar outpost. Critical energy storage needs were identified as batteries for EVA suits, surface mobility systems, and a lander ascent stage; fuel cells for the lander and mobility systems; and a regenerative fuel cell for surface power. To address these needs, the Energy Storage Project developed advanced lithium-ion battery technology, targeting cell-level safety and very high specific energy and energy density. Key accomplishments include the development of silicon composite anodes, lithiated-mixed-metal-oxide cathodes, low-flammability electrolytes, and cell-incorporated safety devices that promise to substantially improve battery performance while providing a high level of safety. The project also developed "non-flow-through" proton-exchange-membrane fuel cell stacks. The primary advantage of this technology set is the reduction of ancillary parts in the balance-of-plant--fewer pumps, separators and related components should result in fewer failure modes and hence a higher probability of achieving very reliable operation, and reduced parasitic power losses enable smaller reactant tanks and therefore systems with lower mass and volume. Key accomplishments include the fabrication and testing of several robust, small-scale nonflow-through fuel cell stacks that have demonstrated proof-of-concept. This report summarizes the project s goals, objectives, technical accomplishments, and risk assessments. A bibliography spanning the life of the project is also included.

Mercer, Carolyn R.↗
DOE OSTI2020

Accessing the Single-Particle Structure of the Pygmy Dipole Resonance in 208 Pb

New experimental data on the neutron single-particle character of the Pygmy Dipole Resonance (PDR) in Pb 208 are presented. They were obtained from ( d , p ) and resonant proton scattering experiments performed at the Q3D spectrograph of the Maier-Leibnitz Laboratory in Garching, Germany. The new data are compared to the large suite of complementary, experimental data available for Pb 208 and establish ( d , p ) as an additional, valuable, experimental probe to study the PDR and its collectivity. Furthermore, besides the single-particle character of the states, different features of the strength distributions are discussed and compared to large-scale shell model (LSSM) and energy-density functional plus quasiparticle-phonon model theoretical approaches to elucidate the microscopic structure of the PDR in Pb 208 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2018

Rayleigh Scattering Density Measurements from Ultrafast Lasers in High-Pressure, Cryogenic Wind Tunnels

The Rayleigh scattering signal from femtosecond laser pulses is examined for its utility at making instantaneous density measurements in the NASA Langley 0.3-m Transonic Cryogenic Tunnel. An electron-multiplying CCD camera is used to visualize Rayleigh scattering signal taken concurrently with velocity measurements utilizing the femtosecond laser tagging velocimetry technique (FLEET). The results indicate a strong potential for making instantaneous measurements. Viable single-shot images are obtained over the full operational envelope of the facility, and shot-to-shot variations are found to be on average 6 percent (at 95 percent confidence level) and tend to decrease as the facility density is increased. The Rayleigh scattering signals observed before the optical focus exhibit a characteristically linear dependence on the mass-density of the gas, while signals after the focus exhibit a nonlinear (sublinear) density dependence, indicative of stronger absorption at higher densities. The measured Rayleigh scattering signals compare favorably to theoretical assessments made at the tunnel operating conditions.

Burns, Ross A.↗
NASA NTRS1982

A global model of the neutral thermosphere in magnetic coordinates based on OGO 6 data

Data from the OGO 6 satellite have been analyzed in magnetic latitude and magnetic local time coordinates for various seasons and magnetic activity levels. These measurements show considerable detail, particularly in the auroral regions where the energy inputs are well organized in this coordinate system. This detail is not readily observed in models based on geographic coordinates. Atomic oxygen and helium densities and a parameter related to the molecular nitrogen density were analyzed. The long-term averages of these quantities are presented in graphical form and as analytic functions to provide models of these thermospheric parameters. The atomic oxygen and helium densities show minima at high latitudes in the postmidnight sector for nearly all seasons and magnetic activity levels. The exospheric temperature inferred from the N2 density increases toward high latitudes for all seasons and all magnetic activity levels. This inferred temperature is about 300 deg K higher at the summer magnetic pole than at the winter magnetic pole.

Stehle, C. G.↗
NASA NTRS2001

Theory and Simulation of Self- and Mutual-Diffusion of Carrier Density and Temperature in Semiconductor Lasers

Carrier diffusion and thermal conduction play a fundamental role in the operation of high-power, broad-area semiconductor lasers. Restricted geometry, high pumping level and dynamic instability lead to inhomogeneous spatial distribution of plasma density, temperature, as well as light field, due to strong light-matter interaction. Thus, modeling and simulation of such optoelectronic devices rely on detailed descriptions of carrier dynamics and energy transport in the system. A self-consistent description of lasing and heating in large-aperture, inhomogeneous edge- or surface-emitting lasers (VCSELs) require coupled diffusion equations for carrier density and temperature. In this paper, we derive such equations from the Boltzmann transport equation for the carrier distributions. The derived self- and mutual-diffusion coefficients are in general nonlinear functions of carrier density and temperature including many-body interactions. We study the effects of many-body interactions on these coefficients, as well as the nonlinearity of these coefficients for large-area VCSELs. The effects of mutual diffusions on carrier and temperature distributions in gain-guided VCSELs will be also presented.

Li, Jian-Zhong↗
DOE OSTI2023

Exploration, Prediction, and Experimental Verification of Structure and Optoelectronic Properties in I 2 -Eu-IV-X 4 (I = Li, Cu, Ag; IV = Si, Ge, Sn; X = S, Se) Chalcogenide Semiconductors

Recently, there has been extensive research into photovoltaic, thermoelectric, and nonlinear optical applications of chalcogenide semiconductors within the large set of defect-resistant I 2 -II-IV-X4 (I = Li, Cu, Ag; II = Ba, Sr, Eu, Pb; IV = Si, Ge, Sn; X = S, Se) compounds. Five Eu-including compounds have previously been reported within this family, but a comparative study of possible structures and electronic properties of all 18 Eu-based combinations is still absent. Herein, we use hybrid density functional theory to study rare-earth-including I 2 -II-IV-X 4 semiconductors with Eu on the II site, in order to further understand this family and test the geometric tolerance factor approach (reported in our previous work) as a tool for predicting potential stable structures. We investigate how the exchange mixing parameter of the HSE06 density functional, α, affects the energetic positions of electronic levels, especially of the localized f-electron orbitals near the band edges of the extended semiconductor structures, using literature photoemission and band gap data of EuS for comparison. Lowest-energy quaternary structure candidates, energy band structures, and densities of states are computationally predicted for all 18 materials. Based on its predicted photovoltaics-relevant band gap, the previously unknown compound Cu 2 EuSnSe 4 was selected and synthesized. Furthermore, the experimental structure, lattice parameters, and band gap of Cu 2 EuSnSe 4 are consistent with the computational predictions, confirming a 1.55 eV band gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1972

Spectrocopic measurements of water vapor plasmas at high resolution: The optical transition probabilities for OH (A 2 Sigma - X 2 Pi)

Emission and absorption spectra of water vapor plasmas generated in a wall-stabilized arc at atmospheric pressure and 4 current, and at 0.03 atm and 15 to 50 A, were measured at high spatial and spectral resolution. The gas temperature was determined from the shape of Doppler-broadened rotational lines of OH. The observed nonequilibrium population distributions over the energy levels of atoms are interpreted in terms of a theoretical state model for diffusion-controlled arc plasmas. Excellent correlation is achieved between measured and predicted occupation of hydrogen energy levels. It is shown that the population distribution over the nonpredissociating rotational-vibrational levels of the A 2 Sigma state of OH is close to an equilibrium distribution at the gas temperature, although the total density of this state is much higher than its equilibrium density. The reduced intensities of the rotational lines originating in these levels yielded Boltzmann plots that were strictly linear.

Klein, L.↗
DOE OSTI2021

Inverted metamorphic GaInAs solar cell grown by dynamic hydride vapor phase epitaxy

We present an inverted metamorphic rear heterojunction ~1.0 eV GaInAs solar cell deposited by dynamic hydride vapor phase epitaxy (D-HVPE) with high growth rate. This device uses a Ga 1-x In x P compositionally graded buffer (CGB) to bridge the lattice constant gap between the GaAs substrate and the Ga0.71In0.29As emitter layer. High-resolution x-ray diffraction and transmission electron microscopy confirm that the Ga 0.71 In 0.29 As emitter is grown lattice-matched to the in-plane lattice constant of the CGB with minimal generation of defects at the GaInAs/GaInP interface. The device contains a threading dislocation density of 2.3 × 10 6 cm -2 , a level that enables high-performance minority carrier devices and is comparable to previously demonstrated GaInP CGBs grown by D-HVPE. The device exhibits an open-circuit voltage of 0.589 V under a one-sun AM1.5G illumination condition and a bandgap-voltage offset of 0.407 V, indicating metamorphic epitaxial performance nearly equal to state-of-the-art devices. We analyze the dark current of the device and determine that reducing recombination in the depletion region, which can be achieved by reducing the threading dislocation density and optimizing the device doping density, will improve the device performance. Furthermore, the CGB and device layers, comprising ~8 µm of thickness, are grown in under 10 min, highlighting the ability of D-HVPE to produce high-quality metamorphic devices of all types with the potential for dramatically higher throughput compared to present technology.

14 SOLAR ENERGY↗
NASA NTRS1991

Bounds on intergalactic compact objects from observations of compact radio sources

The constraints that can be imposed on the cosmic density of uniformly distributed intergalactic compact objects in the mass range of 10 million to 1 billion solar masses, using VLBI observations of compact radio sources. A compact object at a sufficiently small angular separation from a compact radio source produces a deamplified and inverted secondary image. No such cases are known. Using published maps of compact radio sources and assuming an Einstein-de Sitter cosmology, a density parameter for mass in this range greater than 0.4 is excluded at the 99.7 percent confidence level. Observations using the VLBA should allow one to exclude or discover a density parameter greater than about 0.001 for compact objects in the mass range of 0.1-100 solar masses.

Kassiola, Aggeliki↗
NASA NTRS2004

Volume and Mass Estimation of Three-Phase High Power Transformers for Space Applications

Spacecraft historically have had sub-1kW(sub e), electrical requirements for GN&C, science, and communications: Galileo at 600W(sub e), and Cassini at 900W(sub e), for example. Because most missions have had the same order of magnitude power requirements, the Power Distribution Systems (PDS) use existing, space-qualified technology and are DC. As science payload and mission duration requirements increase, however, the required electrical power increases. Subsequently, this requires a change from a passive energy conversion (solar arrays and batteries) to dynamic (alternator, solar dynamic, etc.), because dynamic conversion has higher thermal and conversion efficiencies, has higher power densities, and scales more readily to higher power levels. Furthermore, increased power requirements and physical distribution lengths are best served with high-voltage, multi-phase AC to maintain distribution efficiency and minimize voltage drops. The generated AC-voltage must be stepped-up (or down) to interface with various subsystems or electrical hardware. Part of the trade-space design for AC distribution systems is volume and mass estimation of high-power transformers. The volume and mass are functions of the power rating, operating frequency, the ambient and allowable temperature rise, the types and amount of heat transfer available, the core material and shape, the required flux density in a core, the maximum current density, etc. McLyman has tabulated the performance of a number of transformers cores and derived a "cookbook" methodology to determine the volume of transformers, whereas Schawrze had derived an empirical method to estimate the mass of single-phase transformers. Based on the work of McLyman and Schwarze, it is the intent herein to derive an empirical solution to the volume and mass estimation of three-phase, laminated EI-core power transformers, having radiated and conducted heat transfer mechanisms available. Estimation of the mounting hardware, connectors, etc. is not included.

Kimnach, Greg L.↗
NASA NTRS2017

Enabling Airspace Integration for High Density Urban Air Mobility

Aviation technologies and concepts have reached a level of maturity that may soon enable an era of on-demand mobility (ODM) fueled by quiet, efficient, and largely automated air taxis. However, successfully bringing such a system to fruition will require introducing orders of magnitude more aircraft to a given airspace volume than can be accommodated by the traditional air traffic control system, among other important technical challenges. The airspace integration problem is further compounded by requirements to set aside appropriate ground infrastructure for take-off and landing areas and ensuring these new aircraft types and their operations do not burden traditional airspace users and air traffic control. These challenge for ODM may be significantly reduced by extending the concepts and technologies developed to manage small unmanned aircraft systems (UAS) at low altitude the UAS traffic management (UTM) system to higher altitudes and aircraft with humans onboard in controlled airspace, or by equipping ODM aircraft with advanced sensors, algorithms, and interfaces. The precedent of operational freedom inherent in visual flight rules and the technologies developed for large UAS and commercial aircraft automation will contribute to the evolution of an ODM system enabled by UTM. This paper describes the set of air traffic services, normally provided by the traditional air traffic system, that an ODM system would implement to achieve the high densities needed for ODMs economic viability. Finally, the paper proposes a framework for integrating, evaluating, and deploying low-, medium-, and high-density ODM concepts that build on each other to ensure operational and economic feasibility at every step.

Mueller, Eric Richard↗