Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEADING ABSTRACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Surface Treatment Strategies for Mitigating Gas Hydrate & Asphaltene Formation, Growth, and Deposition in Flowloops

Abstract Numerous solids including gas hydrates, waxes, and asphaltenes have the potential to form in the production lines of gas and oil fields. This creates a highly non-ideal scenario as the accumulation of said species leads to flow assurance issues, especially with long-term processes like deposition. Since an ever-increasing amount of material is deposited in place at the pipe surface, production stoppage or active mitigation efforts become inevitable. The latter production issues result in increased safety risks and operational expenditures. Therefore, a cost-effective, passive deposition mitigation technology, such as a pipeline coating or surface treatment is especially appealing. The ability to address multiple pipeline flow assurance issues simultaneously without actively disrupting production would represent a dramatic step forward in this area. This study is part of a long-term ongoing effort that evaluates the performance and application of an omniphobic surface treatment for solids deposition prevention in industrially relevant systems. In particular, this specific work concentrates on the efficacy and robustness of the treatment under fully flowing conditions. The apparatuses utilized for this include two flowloops: a lab-scale, high-pressure flowloop for gas hydrate and surface treatment durability studies, and a bench-scale, atmospheric pressure loop for crude oil and asphaltene experiments. Film growth in high-pressure flowloop tests corroborated previous reports of delayed gas hydrate nucleation observed in rocking cells. Without the aid of the memory effect, treated oil-dominated experiments never experienced hydrate formation, spending upwards of a week in the hydrate stability zone (at the subcooled/fluid test conditions). Subsequent tests which utilized the memory effect then revealed that the hydrate formation rate reduced in the presence of the surface treatment compared to a bare stainless-steel surface. This testing was part of a larger set of trials conducted in the flowloop, which lasted about one year. The surface treatment durability under flowing conditions was evaluated during this time. Even after experiencing ∼4000 operating hours and 2 full pressure cycles, no evidence of delamination or damage was detected. Finally, as part of an extension to previous work, corroded surface asphaltene deposition experiments were performed in a bench-top flowloop. Treated experiments displayed an order of magnitude reduction in both total oil (all fractions of crude oil) and asphaltene fraction deposited.

03 NATURAL GAS↗
DOE OSTI2019

Separating physical impacts from natural variability using piggybacking technique

Abstract. In a chaotic system, like moist convection, it is difficult to separate the impact of a physical process from effects of natural variability. This is because modifying even a small element of the system physics typically leads to a different system evolution and it is difficult to tell whether the difference comes from the physical impact or it merely represents a different flow realization. This paper discusses a relatively simple and computationally efficient modelling methodology that allows separation of the two. The methodology is referred to as the piggybacking approach. The idea is to use two sets of thermodynamic variables (the temperature, water vapor, and all aerosol, cloud, and precipitation variables) in a single cloud simulation. The two sets differ in a specific element of the physics, such as aerosol properties, microphysics parameterization, large-scale forcing, environmental profiles, etc. One thermodynamic set is coupled to the dynamics and drives the simulated flow, and the other set piggybacks the flow, that is, thermodynamic variables are carried by the flow but they do not affect it. By switching the two sets (i.e. the set driving the simulation becomes the piggybacking one, and vice versa), the impact on the cloud dynamics can be evaluated. This paper provides details of the method and reviews results of its application to such problems as the postulated deep convection invigoration in polluted environments, the impact of changes in environmental profiles (e.g., due to climate change) on convective dynamics, and the role of cloud-layer heterogeneities for shallow convective cloud field evolution. Prospects for applying piggybacking technique to other areas of atmospheric simulation (e.g., weather prediction or geoengineering) are also mentioned.

Grabowski, Wojciech W.↗
DOE OSTI2018

Enhanced piezoelectric properties in (Ba1-xCax)(Ti0.90Sn0.10)O3-0.08Dy2O3 lead-free ceramics

Highlights: • MPB exists in the BCTSD ceramics with x = 0.06–0.10. • BCTSD ceramics exhibit typical diffuse phase transition behavior, which is not sensitive to the amount of Ca{sup 2+} ions. • Remarkable improvement on piezoelectric properties (d{sub 33} = 675 pC/N, k{sub p} = 55%) were achieved at x = 0.06. - Abstract: (Ba{sub 1-x}Ca{sub x})(Ti{sub 0.90}Sn{sub 0.10})O{sub 3}-0.08Dy{sub 2}O{sub 3} ceramics (BCTSD-x, x = 0.02–0.10) were fabricated by conventional solid state sintering method. The effect of Ca{sup 2+} ions addition on the phase structure, microstructure, and electric properties of ceramics were studied. X-ray diffraction analysis reveals the replacement of Ba{sup 2+} ions in the perovskite structure by Ca{sup 2+} ions. Rhombohedral phase and tetragonal phase coexist in the composition with x = 0.06–0.10. Both d{sub 33} and K{sub p} of the ceramics increase with increasing Ca concentration, and attain maximum values of 675 pC/N and 55.0%, respectively, for x = 0.06. All the ceramics present typical diffuse phase transition behavior, and the feature is not sensitive to the amount of Ca{sup 2+} ions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Neutron Leakage Spectra of the EUCLID Experiment [Abstract]

Integral experiments with sub-critical and critical configurations of special nuclear material are performed in support of nuclear data validation and adjustment. Different nuclear data evaluations may have different values for individual cross sections due to uncertainties in (or lack of) differential experiments, but compensating errors in these data sets can lead to the same k eff results for one application while vastly different for another application. One example of this is 239 Pu, where both ENDF/B-VIII.0 and JEFF-3.3 correctly compute k eff of the Jezebel critical assembly, but the individual contributions from each reaction are vastly different. To help resolve this specific case, the Experiments Underpinned by Computational Learning for Improvements in Nuclear Data (EUCLID) project used machine learning to design a set of experiments to help resolve the compensating errors in 239 Pu. A total of six responses were measured during the experimental campaign, which constrain the data in ways that k eff alone cannot and will be used for adjustment of the nuclear data. One of these responses is the neutron leakage spectrum, which recent work has shown to be useful for constraining the prompt fission neutron spectrum and inelastic scattering. The neutron leakage spectra were measured utilizing a 3 in. right cylinder EJ-301D detector. The measured signal in the detector was deconvoluted using spectrum unfolding techniques, which are presented and compared to simulations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

Metallic phase change material thermal storage for Dish Stirling

Dish-Stirling systems provide high-efficiency solar-only electrical generation and currently hold the world record at 31.25%. This high efficiency results in a system with a high possibility of meeting the DOE SunShot goal of $0.06/kWh. However, current dish-Stirling systems do not incorporate thermal storage. For the next generation of non-intermittent and cost-competitive solar power plants, we propose adding a thermal energy storage system that combines latent (phase-change) energy transport and latent energy storage in order to match the isothermal input requirements of Stirling engines while also maximizing the exergetic efficiency of the entire system. This paper reports current findings in the area of selection, synthesis and evaluation of a suitable high performance metallic phase change material (PCM) as well as potential interactions with containment alloy materials. The metallic PCM's, while more expensive than salts, have been identified as having substantial performance advantages primarily due to high thermal conductivity, leading to high exergetic efficiency. Systems modeling has indicated, based on high dish Stirling system performance, an allowable cost of the PCM storage system that is substantially higher than SunShot goals for storage cost on tower systems. Several PCM's are identified with suitable melting temperature, cost, and performance.

14 SOLAR ENERGY↗
DOE OSTI2015

Linkages of Remote Sea Surface Temperatures and Atlantic Tropical Cyclone Activity Mediated by the African Monsoon

Warm sea surface temperatures (SSTs) in North Atlantic and Mediterranean (NAMED) can influence tropical cyclone (TC) activity in the tropical East Atlantic by modulating summer convection over western Africa. Analysis of 30 years of observations show that the NAMED SST is linked to a strengthening of the Saharan heat low and enhancement of moisture and moist static energy in the lower atmosphere over West Africa, which favors a northward displacement of the monsoonal front. These processes also lead to a northward shift of the African easterly jet that introduces an anomalous positive vorticity from western Africa to the main development region (50W–20E; 10N–20N) of Atlantic TC. By modulating multiple processes associated with the African monsoon, this study demonstrates that warm NAMED SST explains 8% of interannual variability of Atlantic TC frequency. Thus NAME SST may provide useful predictability for Atlantic TC activity on seasonal-to-interannual time scale.

African↗
DOE OSTI2021

Reaching the Excitonic Limit in 2D Janus Monolayers by In Situ Deterministic Growth

Abstract Named after the two‐faced Roman god of transitions, transition metal dichalcogenide (TMD) Janus monolayers have two different chalcogen surfaces, inherently breaking the out‐of‐plane mirror symmetry. The broken mirror symmetry and the resulting potential gradient lead to the emergence of quantum properties such as the Rashba effect and the formation of dipolar excitons. Experimental access to these quantum properties, however, hinges on the ability to produce high‐quality 2D Janus monolayers. Here, these results introduce a holistic 2D Janus synthesis technique that allows real‐time monitoring of the growth process. This prototype chamber integrates in situ spectroscopy, offering fundamental insights into the structural evolution and growth kinetics, that allow the evaluation and optimization of the quality of Janus monolayers. The versatility of this method is demonstrated by synthesizing and monitoring the conversion of SWSe, SNbSe, and SMoSe Janus monolayers. Deterministic conversion and real‐time data collection further aid in conversion of exfoliated TMDs to Janus monolayers and unparalleled exciton linewidth values are reached, compared to the current best standard. The results offer an insight into the process kinetics and aid in the development of new Janus monolayers with high optical quality, which is much needed to access their exotic properties.

2D materials↗
DOE OSTI2017

Circumventing UV Light Induced Nanomorphology Disorder to Achieve Long Lifetime PTB7‐Th:PCBM Based Solar Cells

Abstract Large area flexible electronics rely on organic or hybrid materials prone to degradation limiting the device lifetime. For many years, photo‐oxidation has been thought to be one of the major degradation pathways. However, intense illumination may lead to a burn‐in or a rapid decrease in performance for devices completely isolated from corrosive elements as oxygen or moisture. The experimental studies which are presented in here indicate that a plausible triggering for the burn‐in is a spin flip after a UV photon absorption leading to the accumulation of electrostatic potential energy that initiates a rapid destruction of the nanomorpholgy in the fullerene phase of a polymer cell. To circumvent this and achieve highly stable and efficient devices, a robust nanocrystalline ordering is induced in the PCBM phase prior to UV illumination. In that event, PTB7‐Th:PC 71 BM cells are shown to exhibit T 80 lifetimes larger than 1.6 years under a continuous UV‐filtered 1‐sun illumination, equivalent to 7 years for sunlight harvesting at optimal orientation and 10 years for vertical applications.

Liu, Quan↗
DOE OSTI2019

Dimethyl‐methylphenyl copolysiloxanes by dimethylsilanolate‐initiated ring opening polymerization. Evidence for linearity of the resulting polymer structures

ABSTRACT Recently, we reported that dimethylsilanolate‐initiated anionic ring opening polymerization of dimethylsiloxy‐ and diphenylsiloxy‐cyclic siloxanes results in polymer chain branching by dimethylsilanolate‐induced cleavage of only one Si‐C Ar side bond in diphenylsiloxy repeat units, leading to formation of “Ph‐T‐branches”, and not extending to the cleavage of the second phenyl group. We attributed this behavior to electronic structures of the participating dimethylsiloxy‐, diphenylsiloxy and Ph‐T‐branch silicons and predicted that copolymers prepared by this synthetic route from dimethylsiloxy‐ and methylphenylsiloxy‐cyclics should not undergo branching at all but should have perfect linear chain configuration. Here, we describe results of a study of two such dimethylsilanolate‐initiated ring opening polymerizations of dimethylsiloxy‐ and methyphenylsiloxy‐cyclic tetramers and characterization of the resulting polymers by SEC‐MALS‐VIS, Mark‐Houwink‐Sakurada relationship and 29 Si NMR. The results obtained clearly confirmed our prediction of expected linearity of these polymer chains and also indicated that the resulting polymers were completely amorphous even at as low methylphenylsiloxy‐content as 3.9 mol %. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1122–1129

Zlatanic, Alisa↗
DOE OSTI2022

Hidden Sectors from Multiple Line Bundles for the B−L$B-L$ MSSM

Abstract We give a formalism for constructing hidden sector bundles as extensions of sums of line bundles in heterotic M‐theory. Although this construction is generic, we present it within the context of the specific Schoen threefold that leads to the physically realistic MSSM model. We discuss the embedding of the line bundles, the existence of the extension bundle, and a number of necessary conditions for the resulting bundle to be slope‐stable and thus supersymmetric. An explicit example is presented, where two line bundles are embedded into the factor of the maximal subgroup of the hidden sector E 8 gauge group, and then enhanced to a non‐Abelian bundle by extension. For this example, there are in fact six inequivalent extension branches, significantly generalizing that space of solutions compared with hidden sectors constructed from a single line bundle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Enhanced Quantum Synchronization via Quantum Machine Learning

Abstract The quantum synchronization between a pair of two‐level systems inside two coupled cavities is studied. By using a digital–analog decomposition of the master equation that rules the system dynamics, it is shown that this approach leads to quantum synchronization between both two‐level systems. Moreover, in this digital–analog block decomposition, the fundamental elements of a quantum machine learning protocol can be identified, in which the agent and the environment (learning units) interact through a mediating system, namely, the register. If the algorithm can be additionally equipped with a classical feedback mechanism, which consists of projective measurements in the register, reinitialization of the register state, and local conditional operations on the agent and environment subspace, a powerful and flexible quantum machine learning protocol emerges. Indeed, numerical simulations show that this protocol enhances the synchronization process, even when every subsystem experiences different loss/decoherence mechanisms, and gives the flexibility to choose the synchronization state. Finally, an implementation is proposed, based on current technologies in superconducting circuits.

Cárdenas‐López, Francisco A.↗
DOE OSTI2013

Lithium prevents early cytosolic calcium increase and secondary injurious calcium overload in glycolytically inhibited endothelial cells

Highlights: •We investigate free calcium as a central signalling element in endothelial cells. •Inhibition of glycolysis with 2-deoxy-D-glucose reduces cellular ATP. •This manoeuvre leads to a biphasic increase and overload of free calcium. •Pre-treatment with lithium for 24 h abolishes both phases of the calcium increase. •This provides a new strategy to protect endothelial calcium homeostasis and barrier function. -- Abstract: Cytosolic free calcium concentration ([Ca{sup 2+}]{sub i}) is a central signalling element for the maintenance of endothelial barrier function. Under physiological conditions, it is controlled within narrow limits. Metabolic inhibition during ischemia/reperfusion, however, induces [Ca{sup 2+}]{sub i} overload, which results in barrier failure. In a model of cultured porcine aortic endothelial monolayers (EC), we addressed the question of whether [Ca{sup 2+}]{sub i} overload can be prevented by lithium treatment. [Ca{sup 2+}]{sub i} and ATP were analysed using Fura-2 and HPLC, respectively. The combined inhibition of glycolytic and mitochondrial ATP synthesis by 2-desoxy-D-glucose (5 mM; 2-DG) plus sodium cyanide (5 mM; NaCN) caused a significant decrease in cellular ATP content (14 ± 1 nmol/mg protein vs. 18 ± 1 nmol/mg protein in the control, n = 6 culture dishes, P < 0.05), an increase in [Ca{sup 2+}]{sub i} (278 ± 24 nM vs. 71 ± 2 nM in the control, n = 60 cells, P < 0.05), and the formation of gaps between adjacent EC. These observations indicate that there is impaired barrier function at an early state of metabolic inhibition. Glycolytic inhibition alone by 10 mM 2-DG led to a similar decrease in ATP content (14 ± 2 nmol/mg vs. 18 ± 1 nmol/mg in the control, P < 0.05) with a delay of 5 min. The [Ca{sup 2+}]{sub i} response of EC was biphasic with a peak after 1 min (183 ± 6 nM vs. 71 ± 1 nM, n = 60 cells, P < 0.05) followed by a sustained increase in [Ca{sup 2+}]{sub i}. A 24-h pre-treatment with 10 mM of lithium chloride before the inhibition of ATP synthesis abolished both phases of the 2-DG-induced [Ca{sup 2+}]{sub i} increase. This effect was not observed when lithium chloride was added simultaneously with 2-DG. We conclude that lithium chloride abolishes the injurious [Ca{sup 2+}]{sub i} overload in EC and that this most likely occurs by preventing inositol 3-phosphate-sensitive Ca{sup 2+}-release from the endoplasmic reticulum. Though further research is needed, these findings provide a novel option for therapeutic strategies to protect the endothelium against imminent barrier failure.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

The effect of Cerium addition on microstructure and mechanical properties of high pressure die cast Mg-5Sn alloy

Highlights: • The alloying additive has good grain refinement effect. • The addition of Ce to the Mg-5Sn alloy led to the formation of the new intermetallic phases CeMgSn and Ce{sub 5}Sn{sub 4}. • The hardness, yield and tensile strength of Mg-5Sn alloy were improved with addition of Ce. • The elongation of Mg-5Sn was increased up to 5wt.%Ce addition, and then decreased with addition of 7 wt.%Ce. • The yield and tensile strength of the Ce added alloy were higher than those of the base alloy at elevated temperatures. - Abstract: The effect of Cerium addition to Mg-5Sn alloy and its influence on the microstructure and mechanical properties of the alloy were investigated in this work. The microstructural investigations indicate that the alloying addition of Ce leads to effective grain refinement. Also, it was observed that adding Ce to the Mg-5Sn alloy results in the formation of new phases in the alloy such as Ce{sub 5}Sn{sub 4} and CeMgSn. These intermetallic phases were considered to be effective on the enhancement of the hardness of Mg-5Sn alloy. Furthermore, the tensile test results at room temperature and elevated temperatures revealed that the yield and tensile strength of the Ce added alloy were higher than those of the base alloy. The elongation was also improved up to 5 wt% Ce addition while higher amounts decreased the elongation both at room and elevated temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Non-equilibrium approach to prediction of microstructure evolution for metals undergoing severe plastic deformation

Highlights: • New consistent physically-based model of dynamic recrystallization. • The model is based on evolution of fraction of high-angle grain boundaries. • Possibility to predict the evolution of dislocation cells and grain boundaries. • The model is implemented for FEM simulations. • Results demonstrate inhomogeneous distribution of strain within the sample. - Abstract: Available models of dynamic recrystallization have a number of disadvantages that in most cases make them inapplicable for practical predictions of material microstructure evolution. Both the microstructural and the empirically based approaches do not reflect physical processes leading to evolution of material defect structure in the process of plastic deformation. This work presents an attempt to develop a consistent physically-based model of dynamic recrystallization. This model, accounting for physical nature of processes of material defect structure evolution, should provide a possibility to predict evolution of several different experimentally measurable parameters of material microstructure without introduction of big number of fitting parameters. It is suggested that such a model should be based on equation for evolution of fraction of high-angle grain boundaries (HAGBs) in the process of deformation. It is shown, that the new model gives a possibility to predict the evolution of dislocation cells and grain boundaries in copper-based alloys providing good coincidence with experimental observations. Full 3-dimensional numerical simulation of multidirectional forging of copper is performed utilizing the developed dynamic recrystallization model. The same 3D simulations demonstrate new noteworthy effects connected to inhomogeneous distribution of plastic strain within the bulk of the material and material strain hardening.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Characterization of biochar prepared from biogas digestate

Highlights: • Solid digestate (SD) is a potential feedstock for preparing biochars. • The optimal BET surface area of resulting biochar from SD is over 100 m{sup 2}/g. • The higher temperature leads to the increase in true density of resulting biochar, but exhibited a decreased higher heating value. • The SD-based biochar may be used as a biofertilizer due to the mesoporosity and the abundant in nutrient minerals. - Abstract: In the study, the biogas digestate was evaluated as a potential feedstock for preparing biochars at a broad temperature range of 300–900 °C. The physico-chemical and pore properties of the resulting biochars (denoted as SDBC, solid digestate biochar), including calorific value (higher heating value), surface area/pore volume/pore size distribution, true density, scanning electron microscopy – energy dispersive X-ray spectroscopy (SEM-EDS) and X-ray powder diffraction (XRD), were studied. It was found that the higher heating values of the SDBC products were on a decreasing trend as pyrolysis temperature increased, but they indicated an increase in true density. The results are probably associated with the active pyrolysis of the lignocellulosic fragments and the calcination (or shrinkage) processes, thus resulting in the increased contents of aromatic carbon clusters and main mineral constituents remained. Based on the pore properties, pyrolysis temperature at around 800 °C seemed to be the optimal condition for producing SDBC, where its Brunauer-Emmet-Teller (BET) surface area (>100 m{sup 2}/g) largely increased as compared to that of the digestate feedstock (<1 m{sup 2}/g). Furthermore, the main compositions of mineral ash in the resulting biochar could exist as phosphates, carbonates, or oxides of calcium and other alkali/alkaline earth elements. According to the data on EDS and XRD, more pores could be significantly generated under severe pyrolysis (>700 °C) due to the high aromaticity via the thermal decomposition of lignocelluloses and the volatilization of inorganic minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Acoustic Energy Release During the Laboratory Seismic Cycle: Insights on Laboratory Earthquake Precursors and Prediction

Abstract Machine learning can predict the timing and magnitude of laboratory earthquakes using statistics of acoustic emissions. The evolution of acoustic energy is critical for lab earthquake prediction; however, the connections between acoustic energy and fault zone processes leading to failure are poorly understood. Here, we document in detail the temporal evolution of acoustic energy during the laboratory seismic cycle. We report on friction experiments for a range of shearing velocities, normal stresses, and granular particle sizes. Acoustic emission data are recorded continuously throughout shear using broadband piezo‐ceramic sensors. The coseismic acoustic energy release scales directly with stress drop and is consistent with concepts of frictional contact mechanics and time‐dependent fault healing. Experiments conducted with larger grains (10.5 μm) show that the temporal evolution of acoustic energy scales directly with fault slip rate. In particular, the acoustic energy is low when the fault is locked and increases to a maximum during coseismic failure. Data from traditional slide‐hold‐slide friction tests confirm that acoustic energy release is closely linked to fault slip rate. Furthermore, variations in the true contact area of fault zone particles play a key role in the generation of acoustic energy. Our data show that acoustic radiation is related primarily to breaking/sliding of frictional contact junctions, which suggests that machine learning‐based laboratory earthquake prediction derives from frictional weakening processes that begin very early in the seismic cycle and well before macroscopic failure.

58 GEOSCIENCES↗