Revealing the Importance of Front Interface Quality in Highly Doped CdSe x Te 1– x Solar Cells
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
An electrolyte system based on dicarbonyl solvents has been proposed and implemented in lithium metal batteries (LMBs). Among several dicarbonyl solvents explored, dimethyl dicarbonate (DMDC) emerged as the most promising electrolyte candidate. Interestingly, despite the structural similarities between DMDC and its monocarbonyl counterpart DMC, the DMDC electrolyte exhibits higher solvent coordination, even at the same lithium-to-carbonyl ratio. Further, this leads to the formation of a more robust solid-electrolyte interphase and enhances the anodic stability of the electrolyte. Notably, in various electrolyte systems, the solvation energy is typically enthalpy-driven. However, the bidentate nature of DMDC introduces a significant role for the entropy of solvation because the Li + -DMDC complexes release fewer free molecules. With the addition of non-solvating co-solvent 1,1,2,2-tetrafluoro-ethyl 2,2,3,3-tetrafluoro-propyl ether (TTE), which reduces the viscosity of the electrolyte, the DMDC-TTE system enables remarkably stable cycling of the lithium anode by manipulating the entropy of solvation. This introduces a new strategy for tailoring functional electrolyte systems.
Ni-rich layered cathode materials have attracted extensive attention due to their higher energy density and technological maturity in commercialization. As the nickel content is raised, especially surpassing 80%, the increased energy density comes with the tradeoff of diminished thermal stability and increased electrochemical structural instability of the cathode. Compared with Co, Al, B, and Ta, the introduction of high valence element Nb significantly improved the electrochemical cycling, delivering a capacity of 202 mAh/g, corresponding to a capacity retention of 92% after 200 cycles tested at 45 °C. Further, the ex situ differential scanning calorimetry and in situ isothermal microcalorimetry demonstrate that the Nb-modified cathode has the potential to enhance the safety of ultrahigh nickel (Ni) NMCs and displays remarkable resilience to extensive cycling by inhibiting high-temperature decomposition reactions and exhibiting a lower heat flow during electrochemical cycling.
Not Available
Flexible nanoscale confinement is critical to understanding the role that bending fluctuations play on biological processes where soft interfaces are ubiquitous or to exploit confinement effects in engineered systems where inherently flexible 2D materials are pervasively employed. Here, using molecular dynamics simulations, we compare the phase behavior of water confined between flexible and rigid graphene sheets as a function of the in-plane density, ρ2D. We find that both cases show commensurate mono-, bi-, and trilayered states; however, the water phase in those states and the transitions between them are qualitatively different for the rigid and flexible cases. The rigid systems exhibit discontinuous transitions between an ( n )-layer and an ( n +1)-layer state at particular values of ρ2D, whereas under flexible confinement, the graphene sheets bend to accommodate an ( n )-layer and an (n+1)-layer state coexisting in equilibrium at the same density. We show that the flexible walls introduce a very different sequence of ice phases and their phase coexistence with vapor and liquid phases than that observed with rigid walls. We discuss the applicability of these results to real experimental systems to shed light on the role of flexible confinement and its interplay with commensurability effects.
Density functional theory (DFT) is a valuable tool for calculating adsorption energies toward designing materials for hydrogen storage. However, dispersion forces being absent from the local/semi-local theory, it remains unclear as to how the consideration of van der Waals (vdW) interactions affects such calculations. For the first time, we applied diffusion Monte Carlo (DMC) to evaluate the adsorption characteristics of a hydrogen molecule on a (5,5) armchair silicon-carbide nanotube (H 2 -SiCNT). Within the DFT framework, we benchmarked various exchange-correlation functionals, including those recently developed for treating dispersion or vdW interactions. We found that the vdW-corrected DFT methods agree well with DMC, whereas the local (semilocal) functional significantly over (under)-binds. Furthermore, we fully optimized the H 2 -SiCNT geometry within the DFT framework and investigated the correlation between the structure and charge density. The vdW contribution to the adsorption was found to be non-negligible at similar to 1 kcal/mol per hydrogen molecule, which amounts to 9-29% of the ideal adsorption energy required for hydrogen storage applications.
The active site of myosin contains a group of highly conserved amino acid residues whose roles in nucleotide hydrolysis and energy transduction might appear to be obvious from the initial structural and kinetic analyses but become less clear on deeper investigation. One such residue is Ser236 (Dictyostelium discoideum myosin II numbering) which was proposed to be involved in a hydrogen transfer network during {gamma}-phosphate hydrolysis of ATP, which would imply a critical function in ATP hydrolysis and motility. The S236A mutant protein shows a comparatively small decrease in hydrolytic activity and motility, and thus this residue does not appear to be essential. To understand better the contribution of Ser236 to the function of myosin, structural and kinetic studies have been performed on the S236A mutant protein. The structures of the D. discoideum motor domain (S1dC) S236A mutant protein in complex with magnesium pyrophosphate, MgAMPPNP, and MgADP{center_dot}vanadate have been determined. In contrast to the previous structure of wild-type S1dC, the S236A{center_dot}MgAMPPNP complex crystallized in the closed state. Furthermore, transient-state kinetics showed a 4-fold reduction of the nucleotide release step, suggesting that the mutation stabilizes a closed active site. The structures show that a water molecule approximately adopts the location of the missing hydroxyl of Ser236 in the magnesium pyrophosphate and MgAMPPNP structures. This study suggests that the S236A mutant myosin proceeds via a different structural mechanism than wild-type myosin, where the alternate mechanism is able to maintain near normal transient-state kinetic values.
The diheme enzyme MauG catalyzes the posttranslational modification of a precursor protein of methylamine dehydrogenase (preMADH) to complete the biosynthesis of its protein-derived tryptophan tryptophylquinone (TTQ) cofactor. It catalyzes three sequential two-electron oxidation reactions which proceed through a high-valent bis-Fe(IV) redox state. Tyr294, the unusual distal axial ligand of one c-type heme, was mutated to His, and the crystal structure of Y294H MauG in complex with preMADH reveals that this heme now has His-His axial ligation. Y294H MauG is able to interact with preMADH and participate in interprotein electron transfer, but it is unable to catalyze the TTQ biosynthesis reactions that require the bis-Fe(IV) state. This mutation affects not only the redox properties of the six-coordinate heme but also the redox and CO-binding properties of the five-coordinate heme, despite the 21 {angstrom} separation of the heme iron centers. This highlights the communication between the hemes which in wild-type MauG behave as a single diheme unit. Spectroscopic data suggest that Y294H MauG can stabilize a high-valent redox state equivalent to Fe(V), but it appears to be an Fe(IV)=O/{pi} radical at the five-coordinate heme rather than the bis-Fe(IV) state. This compound I-like intermediate does not catalyze TTQ biosynthesis, demonstrating that the bis-Fe(IV) state, which is stabilized by Tyr294, is specifically required for this reaction. The TTQ biosynthetic reactions catalyzed by wild-type MauG do not occur via direct contact with the Fe(IV)=O heme but via long-range electron transfer through the six-coordinate heme. Thus, a critical feature of the bis-Fe(IV) species may be that it shortens the electron transfer distance from preMADH to a high-valent heme iron.
We investigated the performance of ambipolar field-effect transistors based on a series of alternating low band gap polymers of oligothiophene and diketopyrrolopyrrole (DPP). The polymers contain oligothiophene units of terthiophene [T3] and thiophene-thienothiophene-thiophene [T2TT] and DPP units carrying branched alkyl chains of 2-hexyldecyl [HD] or 2-octyldodecyl [OD]. The structural variation allows us to do a systematic study on the relationship between the interchain stacking/ordering of semiconducting polymers and their resulting device performance. On the basis of synchrotron X-ray diffraction and atomic force microscopy measurements on polymer films, we found that longer branched alkyl side chains, i.e., OD, and longer and more planar oligothiophene, i.e., T2TT, generate the more crystalline structures. Upon thermal annealing, the crystallinity of the polymers was largely improved, and polymers containing a longer branched alkyl chain responded faster because longer alkyl chains have larger cohesive forces than shorter chains. For all the polymers, excellent ambipolar behavior was observed with a maximum hole and electron mobility of 2.2 and 0.2 cm{sup 2} V{sup -1} s{sup -1}, respectively.
The use of covalently bonded molecular layers provides a way to combine the outstanding stability and electrochemical properties of carbon-based structures with the unique properties of molecular structures for applications such as electrocatalysis and solar conversion. The functionalization of vertically aligned carbon nanofibers (VACNFs) with 1-alkenes, using ultraviolet light, was investigated as a potential way to impart a variety of different functional groups onto the nanofiber sidewalls. We report how variations in the nanofiber growth rate impact both the amount of exposed edge-plane sites and the resulting electrochemical activity toward Ru(NH{sub 3}){sub 6}{sup 3+/2+} and Fe(CN){sub 6}{sup 3-/4-} redox couples. Measurements of the distribution of surface oxides show that surface oxides are unaffected by the grafting of alkenes to the nanofibers. Carbon nanofiber reactivity was also compared to multiwalled and single-walled carbon nanotubes. Our results demonstrate that edge-plane sites are preferred sites for photochemical grafting, but that the grafting of molecular layers only slightly reduces the overall electrochemical activity of the nanofibers toward the Ru(NH{sub 3}){sub 6}{sup 3+/2+} couple. These results provide new insights into the relationships between the chemical reactivity and electrochemical properties of nanostructured carbon materials and highlight the crucial role that exposed edge-plane sites play in the electrochemical properties of carbon nanotubes and nanofibers.
An extensive examination of combustion gases containing trace amounts of mercury shows unambiguously mercury's propensity for heterogeneous chemistry. Although additional mechanisms for the oxidation chemistry of mercury have been implied by the continuing inadequacy of modeling attempts, details of the specific chemistry have remained unknown. Now it is shown that mercury can efficiently chemi-deposit onto surfaces encountered in practical combustors. If sulfur is present, condensed mercuric sulfate forms momentarily. This is then converted by gaseous HCl to HgCl{sub 2} that may sublime into the flow or be retained. This elusive and efficient noncatalytic mechanism most likely explains the observed fractional conversions to the dichloride observed in coal combustors. A receptive surface acts solely as an intermediary, facilitating the conversion while disguising its role. Without sulfur, a corresponding mechanism occurs but via HgO that is similarly converted to the dihalide. Such heterogeneous dynamics have significant repercussions for both full-scale combustors and bench-type experiments, which data have been reassessed and reviewed. Conclusions imply that observations concerning mercury will be system dependent and no two combustors can be exactly alike. This fundamental understanding now lays a foundation for meaningful interpretations and program planning. It has indicated also the extreme care needed in sampling and monitoring the speciation of mercury in such combustion flows for reliable results. It now points to a simple low-cost surface-induced mitigation method for effectively converting the mercury in flue gases to the water-soluble dichloride. It is in essence no more than an optimization of the natural process that is currently occurring in combustors but to only limited degrees. 185 refs., 7 figs.
The H(NH2BH2)nH oligomers are possible products from dehydrogenation of ammonia borane (NH3BH3) and ammonium borohydride (NH4BH4), which belong to a class of boron-nitrogen-hydrogen (BNHx) compounds that are promising materials for chemical hydrogen storage. Understanding the kinetics and reaction pathways of formation of these oligomers and their further dehydrogenation is essential for developing BNHx-based hydrogen storage materials. We have performed computational modeling using density functional theory (DFT), ab initio wavefunction theory, and Car-Parrinello molecular dynamics (CPMD) simulations on the energetics and formation pathways for the H(NH2BH2)nH (n=1-4) oligomers, polyaminoborane (PAB), from NH3BH3 monomers and the subsequent dehydrogenation steps to form polyiminoborane (PIB). Through transition state searches and evaluation of the intrinsic reaction coordinates, we have investigated the B-N bond cleavage, the reactions of NH3BH3 molecule with intermediates, dihydrogen release through intra- and intermolecular hydrogen transfer, dehydrocoupling/cyclization of the oligomers, and the dimerization of NH3BH3 molecules. We discovered the formation mechanism of H(NH2BH2)n+1H oligomers through reactions of the H(NH2BH2)nH oligomers first with BH3 followed by reactions with NH3 and the release of H2, where the BH3 and NH3 intermediates are formed through dissociation of NH3BH3. We also found that the dimerization of the NH3BH3 molecules to form c-(NH2BH2)2 is slightly exothermic, with an unexpected transition state that leads to the simultaneous release of two H2 molecules. The dehydrogenations of the oligomers are also exothermic, typically by less than 10 kcal/(mol of H2), with the largest exothermicity for n=3. The transition state search shows that the one-step direct dehydrocoupling cyclization of the oligomers is not a favored pathway because of high activation barriers. The dihydrogen bonding, in which protic (HN) hydrogens interact with hydridic (HB) hydrogens, plays a vital role in stabilizing different structures of the reactants, transition states, and products. The dihydrogen interaction (DHI) within the -BH2(η2-H2) moiety accounts for both the formation mechanisms of the oligomers and for the dehydrogenation of ammonia borane. Support was provided from the U.S. Department of Energy, Office of Basic Energy Sciences, Chemical Sciences Division and from the U.S. Department of Energy, Energy Efficiency and Renewable Energy, Chemical Hydrogen Storage Center of Excellence. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.
The structural and magnetic properties of the newly crystallized CuX{sub 2}(pyzO)(H{sub 2}O){sub 2} (X = Cl, Br; pyzO = pyrazine-N,N{prime}-dioxide) coordination polymers are reported. These isostructural compounds crystallize in the monoclinic space group C2/c with, at 150 K, a = 17.0515(7) {angstrom}, b = 5.5560(2) {angstrom}, c = 10.4254(5) {angstrom}, {beta} = 115.400(2){sup o}, and V = 892.21(7) {angstrom}{sup 3} for X = Cl and a = 17.3457(8) {angstrom}, b = 5.6766(3) {angstrom}, c = 10.6979(5) {angstrom}, {beta} = 115.593(2){sup o}, and V = 950.01(8) {angstrom}{sup 3} for X = Br. Their crystal structure is characterized by one-dimensional chains of Cu{sup 2+} ions linked through bidentate pyzO ligands. These chains are joined together through OH {hor_ellipsis} O hydrogen bonds between the water ligands and pyzO oxygen atoms and Cu-X {hor_ellipsis} X-Cu contacts. Bulk magnetic susceptibility measurements at ambient pressure show a broad maximum at 7 (Cl) and 28 K (Br) that is indicative of short-range magnetic correlations. The dominant spin exchange is the Cu-X {hor_ellipsis} X-Cu supersuperexchange because the magnetic orbital of the Cu{sup 2+} ion is contained in the CuX{sub 2}(H{sub 2}O){sub 2} plane and the X {hor_ellipsis} X contact distances are short. The magnetic data were fitted to a Heisenberg 1D uniform antiferromagnetic chain model with J1D/kB = -11.1(1) (Cl) and -45.9(1) K (Br). Magnetization saturates at fields of 16.1(3) (Cl) and 66.7(5) T (Br), from which J1D is determined to be -11.5(2) (Cl) and -46.4(5) K (Br). For the Br analog the pressure dependence of the magnetic susceptibility indicates a gradual increase in the magnitude of J1D/kB up to -51.2 K at 0.84 GPa, suggesting a shortening of the Br {hor_ellipsis} Br contact distance under pressure. At higher pressure X-ray powder diffraction data indicates a structural phase transition at 3.5 GPa. Muon-spin relaxation measurements indicate that CuCl{sub 2}(pyzO)(H{sub 2}O){sub 2} is magnetically ordered with TN = 1.06(1) K, while the signature for long-range magnetic order in CuBr{sub 2}(pyzO)(H{sub 2}O){sub 2} was much less definitive down to 0.26 K. The results for the CuX{sub 2}(pyzO)(H{sub 2}O){sub 2} complexes are compared to the related CuX{sub 2}(pyrazine) materials.
Infection of cells by HIV depends upon profound structural rearrangements within the trimeric viral protein gp41. Critical to this process is the formation of a six-helix bundle in which a set of three N-terminal heptad repeat (NHR) helices assemble to form a core displaying long grooves that provide docking sites for three C-terminal heptad repeat (CHR) helices. We report experiments designed to discriminate between two alternative hypotheses regarding the source of affinity between individual CHR helices and the complementary groove: (1) affinity is dominated by interactions of a small cluster of side chains at one end of the CHR helix; or (2) affinity depends upon interactions distributed across the long CHR helix. We have employed two complementary experimental designs, and results from both favor the latter hypothesis.