Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High operating temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Ultra High Voltage Propellant Isolators and Insulators for JIMO Ion Thrusters

Within NASA's Project Prometheus, high specific impulse ion thrusters for electric propulsion of spacecraft for the proposed Jupiter Icy Moon Orbiter (JIMO) mission to three of Jupiter's moons: Callisto, Ganymede and Europa will require high voltage operation to meet mission propulsion. The anticipated approx.6,500 volt net ion energy will require electrical insulation and propellant isolation which must exceed that used successfully by the NASA Solar Electric Propulsion Technology Readiness (NSTAR) Deep Space 1 mission thruster by a factor of approx.6. Xenon propellant isolator prototypes that operate at near one atmosphere and prototypes that operate at low pressures (<100 Torr) have been designed and are being tested for suitability to the JIMO mission requirements. Propellant isolators must be durable to Paschen breakdown, sputter contamination, high temperature, and high voltage while operating for factors longer duration than for the Deep Space 1 Mission. Insulators used to mount the thrusters as well as those needed to support the ion optics have also been designed and are under evaluation. Isolator and insulator concepts, design issues, design guidelines, fabrication considerations and performance issues are presented. The objective of the investigation was to identify candidate isolators and insulators that are sufficiently robust to perform durably and reliably during the proposed JIMO mission.

Banks, Bruce A.↗

High-throughput, super-resolution 3D reconstruction of nano-structured solid oxide fuel cell electrodes and quantification of microstructure-property relationships

Nano-structuring methods are actively applied to solid oxide fuel cell electrodes to reduce the operating temperature while preserving a high electro-catalytic activity. The unique nanoscale microstructure is vital to electrochemical performance, yet not well quantified in three dimensions. Here, with a multi-stage recovering principle of distance correlation functions, the three-dimensional microstructures of La 0.8 Sr 0.2 MnO 3-δ nanoparticles infiltrated porous Y 0.16 Zr 0.84 O 2-δ electrodes are reconstructed with a dimension of 1024 × 1024 × 1024 voxels at a resolution of 7.5 nm from one two-dimensional micrograph. The key geometric characteristics, such as tortuosity factors, active surface/interface areas and three-phase boundary length, are calculated from the reconstructed three-dimensional microstructures at various loadings of La 0.8 Sr 0.2 MnO 3-δ . Combining with the analysis of distribution of relaxation times, the active three-phase boundary length is shown to be the main factor governing the electrode impedance, and is related quantitatively to the electrochemical process at high frequency. The accuracy of capturing nanoscale features is validated by the focused ion beam sectioning dataset of a Ni-Y 0.16 Zr 0.84 O 2-δ electrode at nanoscale resolution. Lastly, this work provides a promising strategy for reconstructing three-dimensional heterogeneous nanostructures from one super-resolution two-dimensional micrograph, and demonstrates a quantitative approach for uncovering processing-structure-property relationships of nanostructured electrodes and beyond.

25 ENERGY STORAGE↗

Gigawatt-year nuclear-geothermal energy storage for light-water and high-temperature reactors

Capital-intensive, low-operating cost nuclear plants are most economical when operated under base-load conditions. However, electricity demand varies on a daily, weekly, and seasonal basis. In deregulated utility markets this implies high prices for electricity at times of high electricity demand and low prices for electricity at times of low electricity demand. We examined coupling nuclear heat sources to geothermal heat storage systems to enable these power sources to meet hourly to seasonal variable electricity demand. At times of low electricity demand the reactor heats a fluid that is then injected a kilometer or more underground to heat rock to high temperatures. The fluid travels through the permeable-rock heat-storage zone, transfers heat to the rock, is returned to the surface to be reheated, and re-injected underground. At times of high electricity demand the cycle is reversed, heat is extracted, and the heat is used to power a geothermal power plant to produce intermediate or peak power. When coupling geothermal heat storage with light-water reactors (LWRs), pressurized water (<300 deg. C) is the preferred heat transfer fluid. When coupling geothermal heat storage with high temperature reactors at higher temperatures, supercritical carbon dioxide is the preferred heat transfer fluid. The non-ideal characteristics of supercritical carbon dioxide create the potential for efficient coupling with supercritical carbon dioxide power cycles. Underground rock cannot be insulated, thus small heat storage systems with high surface to volume ratios are not feasible because of excessive heat losses. The minimum heat storage capacity to enable seasonal storage is {approx}0.1 Gigawatt-year. Three technologies can create the required permeable rock: (1) hydro-fracture, (2) cave-block mining, and (3) selective rock dissolution. The economic assessments indicated a potentially competitive system for production of intermediate load electricity. The basis for a nuclear geothermal system with LWRs exists today; but, there is need for added research and development before deployment. There are significantly greater challenges for geothermal heat storage at higher temperatures. Such systems are strongly dependent upon the local geology. (authors)

15 GEOTHERMAL ENERGY↗

High Toughness Cermets for Molten Salt Pumps

The DOE seeks major reductions in the cost of concentrated solar power (CSP) to achieve subsidy-free, cost-competitive solar power by 2020. A significant step in achieving lower cost is the evolution to higher temperature operation. Molten chloride salts, and in particular KCl-MgCl2 currently appear to be to be the materials of choice to operate at these temperatures. The high working temperature and corrosive properties of these salts present an aggressive environment for CSP components. Valves seat and seals, bearings and impellers for pumps have additional requirements because of the dynamic mechanical loads that these components must survive. Alloys do not have good compatibility with salt and are expensive. Ceramic composites are difficult to form. This project offers a proof of concept for the use of ceramic, metal matrix nanocomposite materials to enable the economical construction and operation of molten salt pumps.

14 SOLAR ENERGY↗

Final Scientific/Technical Report for "A Novel,Highly Efficient and Economic Purification Process Revolutionizing PTA Production"

GTC Technology, Inc., under a cooperative agreement with the DOE’s Industrial Technologies Program and in collaboration with Montana State University, has completed pilot scale testing of a revolutionary new process to produce purified terephthalic acid (PTA), a crucial chemical commodity manufactured worldwide. Purified terephthalic acid (PTA) is a starting material for the formation of polyester resin. Polyester resin is used to make many valuable commercial products, including clothing, plastic containers and films. In traditional PTA production, critical reactions are carried out at high temperatures and pressures, creating physically harsh and economically costly operating conditions. The chemical halide bromine is an essential ingredient for part of the conventional process. As a result of using bromine, the highly toxic and environmentally insidious compound methyl bromide is formed. The corrosive nature of bromine also mandates the use of specialized and expensive corrosion-resistant materials for plant construction. Plants processing PTA conventionally must also use copious amounts of precious water resources and manage costly water treatment operations. GTC’s new TA purification method employs a unique two-step crystallization process capable of operating at lower temperatures and pressures than traditional methods. Utilization of a highly selective, proprietary organic solvent blend also allows for the flexibility of accepting higher levels of impurities in the initial purification feedstock. The relaxed physical operating conditions combined with the effectiveness of the blended organic solvent allow for the efficient purification of feedstock created in a bromine free manner. Along with the elimination of bromine, the new purification technology drastically reduces energy costs and expensive wastewater treatment. Industry wide implementation in the United States alone could yield energy savings of 22 trillion BTU per year. In 2007, using the aforementioned innovative and novel approaches to purification, GTC successfully produced PTA at the pilot scale. The product was sent to a major polyester manufacturer for commercial evaluation. The findings from the resin manufacturer noted that polymerization characteristics of GTC-PTA were identical to that of commercially available PTA. Global production of PTA is predicted to grow significantly over the next decade, as consumers demand lighter, more disposable goods and products. The potential environmental and economic benefits of implementing GTC’s new terephthalic acid purification technology are phenomenal in scope. Reduced capital and operating costs, combined with the ability to easily integrate into existing facilities and handle less pure feedstock make this revolutionary new technology incredibly valuable to polyester consumers worldwide.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advanced Electrical Materials and Components Being Developed

All aerospace systems require power management and distribution (PMAD) between the energy and power source and the loads. The PMAD subsystem can be broadly described as the conditioning and control of unregulated power from the energy source and its transmission to a power bus for distribution to the intended loads. All power and control circuits for PMAD require electrical components for switching, energy storage, voltage-to-current transformation, filtering, regulation, protection, and isolation. Advanced electrical materials and component development technology is a key technology to increasing the power density, efficiency, reliability, and operating temperature of the PMAD. The primary means to develop advanced electrical components is to develop new and/or significantly improved electronic materials for capacitors, magnetic components, and semiconductor switches and diodes. The next important step is to develop the processing techniques to fabricate electrical and electronic components that exceed the specifications of presently available state-of-the-art components. The NASA Glenn Research Center's advanced electrical materials and component development technology task is focused on the following three areas: 1) New and/or improved dielectric materials for the development of power capacitors with increased capacitance volumetric efficiency, energy density, and operating temperature; 2) New and/or improved high-frequency, high-temperature soft magnetic materials for the development of transformers and inductors with increased power density, energy density, electrical efficiency, and operating temperature; 3) Packaged high-temperature, high-power density, high-voltage, and low-loss SiC diodes and switches.

Schwarze, Gene E.↗

An advanced high energy-efficiency rechargeable aluminum-selenium battery

We report that aluminum-ion batteries (AIBs) are considered as a promising alternative to traditional rechargeable batteries due to their high theoretical capacity, low cost, and multivalent-ion/multi-electron transfer, but are hindered from commercialization by the lack of suitable cathode materials. Herein, an aluminum-selenium (Al-Se) battery that operates at room temperature with high energy efficiency is reported. This Al-Se battery exhibits high selenium utilization with a discharge capacity of 607 mAh g -1 , a reduced overpotential, and high volumetric capacity for over 100 cycles. Furthermore, ex-situ spectroscopic and microscopic investigations of the Se cathodes indicated the existence of an aluminum selenide component as the discharge product. Additionally, in-situ transmission electron microscopy provided not only insights into understanding the Al-Se electrochemistry, but also a real-time characterization technique to evaluate the electrochemistry of AIBs in general.

25 ENERGY STORAGE↗

Pressure Composition Temperature Curves of Hydride Moderators

Microreactors are compact and mobile reactors which operate at low power and high temperatures. These reactors generate heat which is then converted to electricity for use in a variety of special purpose applications. Microreactors are of interest due to their light weight, compact size and the ability to meet the needs for high energy in difficult or remote areas. Metal hydrides have been studied for nuclear and aviation applications. The emergence of microreactors the interest in metal hydrides is significant due to their ability to moderate neutrons in a light weight and solid form. In case of an off normal event, more accurate data is needed for the absorption/desorption rates of the hydrides due to the high uncertainties on hydrogen redistribution in the moderator. The literature shows considerable discrepancies in the PCT curves for yttrium and zirconium. The uncertainty is much more notable at higher stoichiometries of the hydride phase at high temperature. To understand the in-pile performance, a detailed understating of the impurities and microstructure is needed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

An Anaylsis of Control Requirements and Control Parameters for Direct-Coupled Turbojet Engines

Requirements of an automatic engine control, as affected by engine characteristics, have been analyzed for a direct-coupled turbojet engine. Control parameters for various conditions of engine operation are discussed. A hypothetical engine control is presented to illustrate the use of these parameters. An adjustable speed governor was found to offer a desirable method of over-all engine control. The selection of a minimum value of fuel flow was found to offer a means of preventing unstable burner operation during steady-state operation. Until satisfactory high-temperature-measuring devices are developed, air-fuel ratio is considered to be a satisfactory acceleration-control parameter for the attainment of the maximum acceleration rates consistent with safe turbine temperatures. No danger of unstable burner operation exists during acceleration if a temperature-limiting acceleration control is assumed to be effective. Deceleration was found to be accompanied by the possibility of burner blow-out even if a minimum fuel-flow control that prevents burner blow-out during steady-state operation is assumed to be effective. Burner blow-out during deceleration may be eliminated by varying the value of minimum fuel flow as a function of compressor-discharge pressure, but in no case should the fuel flow be allowed to fall below the value required for steady-state burner operation.

Novik, David↗

Evaluation of 10V Chip Polymer Tantalum Capacitors for Space Applications

Due to low ESR and safe failure mode, new technology chip polymer tantalum capacitors (CPTC) have gained popularity in the electronics design community, first in commercial applications, and now in hi-rel and space systems. The major drawbacks of these parts are high leakage currents, degradation under environmental stresses, and a relatively narrow temperature range of operating and storage conditions. Several studies have shown that a certain amount of moisture in polymer cathodes is necessary for a normal operation of the parts. This might limit applications of CPTCs in space systems and requires analysis of long-term exposure to deep vacuum conditions on their performance and reliability. High leakage currents and limited maximum operational temperature complicate accelerated testing that is necessary to assess long-term reliability and require new screening and qualification procedures for quality assurance. A better understanding of behavior of CPTCs as compared to traditional, MnO2, capacitors is necessary to develop adequate approaches for QA system for space applications. A specific of CPTCs is that different materials and processes might be used for low-voltage (10 V and less) and high-voltage (above 10 V) capacitors, so performance and degradation processes in these groups require separate analysis. In this work, that is a part of the NASA Electronic Parts and Packaging (NEPP) program, degradation of AC and DC characteristics under environmental stresses at different temperatures and voltages have been studied in nine lots of commercial and automotive grade capacitors rated to 10 V. Results of analysis of leakage currents, high temperature storage (HTS) up to 5000 hrs in vacuum and air at different temperatures, and Highly Accelerated Life Testing (HALT) in the range from 85 C to 145 C are presented. Temperature and voltage acceleration factors were calculated based on approximation of distributions of degradation rates with a general log-linear Weibull model. Mechanisms of degradation and failures, and requirements for screening and qualification testing are discussed.

Tantalum Capacitors↗

An Active and Resilient Bilayer Oxygen Electrode for Intermediate Temperature Reversible Solid Oxide Cells

High temperature solid oxide cells (SOCs) have intrinsic advantage in efficiency over conventional internal combustion engines for power generation and low-temperature electrolysis cells for H2 production. This efficiency advantage could potentially lead to cost saving and emission reduction. However, commercialization of the current SOCs technology is hindered by its poor durability. One major component with the durability issue is oxygen electrode (OE). For example, the durability of OEs can be negatively affected by the gaseous Cr-species originated from the air oxidation of high-temperature alloy interconnect. For electrolysis operation, on the other hand, delamination of OE from electrolyte, particularly at high current densities, has been identified as a major cause for the performance degradation. Therefore, developing robust and active OEs is of critical importance to SOC technology. WE have previously demonstrated a new bilayer OE with strong activity and stability. Here in this presentation, we present recent results of electrochemical characterization on bilayer OE operating under both fuel cell and electrolysis modes. We will first show the optimization of bilayer OE in terms of thickness, morphology, and calcination temperature and their impacts on cell area specific resistance (ASR). With three-electrode symmetric cell configuration, we also show the results of charge transfer ASR of bilayer OE as a function of current density, temperature, and time in different atmospheres. The results are further compared with the baseline OE (LSCF+GDC) to demonstrate the advantage of bilayer OE.

Huang, Kevin↗

Temperature compensated transfer function for probability of detection (POD) in high temperature ultrasonic NDE using low temperature signals - 249

Ultrasonic piezoelectric based transducers offer the potential for in-coolant NDT measurements and imaging required at high temperature for the safe operation of advanced small modular reactors (SMRs). Current work estimates a significant 97% reduction in the probability of detection (POD) for an artificial flaw size of 2{lambda} due to degradation of the transducer performance at elevated temperature. The source of variability for POD in the current work is the temperature dependence of material matrix of piezoelectric material PZT-5A used in the sensor. The physics based model developed using finite element method quantifies reduction in the scattering amplitude for the side drilled hole (SDH) from 15 C to 195 C. Using model assisted probability of detection (MAPOD) approach, sensor temperature effect on the POD is demonstrated for SDHs in the low carbon steel specimen. Scattering amplitudes for the room temperature simulated data is validated with the experimental data. A temperature correction factor and transfer factors are reported to transform the simulated temperature effect from physics based model to the experimental data for estimation of high temperature POD using low temperature ultrasonic measurements. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Two-temperature effects in Hall-MHD simulations of the HIT-SI experiment

A two-temperature Hall-magnetohydrodynamic (Hall-MHD) model, which evolves the electron and ion temperatures separately, is implemented in the PSI-Tet 3D MHD code and used to model plasma dynamics in the Helicity Injected Torus–Steady Inductive (HIT-SI) experiment. The two-temperature model is utilized for HIT-SI simulations in both the PSI-Tet and NIMROD codes at a number of different injector frequencies in the 14.5–68.5 kHz range. At all frequencies, the NIMROD two-temperature model results in increased toroidal current, lower chord-averaged density, higher average temperatures, outward radial shift of the current centroid, and axial symmetrization of the current centroid, relative to the single-temperature NIMROD simulations. The two-temperature PSI-Tet model illustrates similar trends, but at high frequency operation, it exhibits lower electron temperature, smaller toroidal current, and decreased axial symmetrization with respect to the single-temperature PSI-Tet model. With all models, average temperatures and toroidal currents increase with the injector frequency. Power balance and heat fluxes to the wall are calculated for the two-temperature PSI-Tet model and illustrate considerable viscous and compressive heating, particularly at high injector frequency. Parameter scans are also presented for artificial diffusivity, wall temperature, and density. Both artificial diffusivity and the density boundary condition significantly modify the plasma density profiles, leading to larger average temperatures, toroidal current, and relative density fluctuations at low densities. As a result, a low density simulation achieves sufficiently high current gain (G > 5) to generate significant volumes of closed flux lasting 1–2 injector periods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Negative Charge Confined Amine Carriers within the Nanowire Network for Stable and Efficient Membrane Carbon Capture

Membrane-based carbon dioxide (CO 2 ) capture has attracted great research interest owing to its potential for higher separation efficiency and lower energy consumption. However, it is still a challenging task to capture CO 2 with membrane from flue gas, especially under moderate-temperature and high-humidity conditions. Here, a stable CO 2 -selective membrane that can operate at temperatures up to 90 °C and under high humidity is reported. The positively charged amine carriers for CO 2 are confined within the negatively charged polymer modified carbon nanotube (CNT) network. In this structure, interconnected CNTs act as the framework for the selective layer and provide numerous nanochannels for gas transport. The negatively charged polymer ensures the carrier stability and further regulates the size of nanochannels in the CNT network. By virtue of carrier-facilitated transport, high CO 2 permeance (up to 3300 gas permeation units) and high CO 2 /N 2 selectivity (400) are achieved under simulated flue gas conditions. Moreover, theoretical calculations verify that the stable separation performance is due to the strong electrostatic interaction between the amine carriers and polymer matrix. The high performance and good stability indicate the great potential of this novel membrane structure for practical application in CO 2 capture.

36 MATERIALS SCIENCE↗

Cardinal: A Lower Length-scale Simulator for Fluoride Cooled High Temperature Reactors

The new DOE-NE “Center of Excellence for Thermal-fluids applications in Nuclear Energy” inaugurated in April 2018 considers and researches novel new solution strategies for historically challenging flow issues that still plague the current fleet of deployed Light Water Reactor (LWR) nuclear reactors as well as predicting various fluid flow and fluid related issues with advanced reactor technologies. Our advanced thermal-fluids research and development approach synergistically combines three natural, though overlapping, length and time scales in a hierarchal multi-scale approach to avoid the temptation and pitfalls of attempting to develop a single “solve all” algorithm for physical fluid flow problems that will span 109 in spatial and temporal scales. The demonstrate the multi-scale philosophy of the center we focus first on Fluoride Cooled High Temperature Reactors (FHRs), and in particular on the Berkeley’s PB-FHR design Mark-I design. The Fluoride salt cooled High temperature Reactor (FHR) is a class of advanced nuclear reactors that combine the robust coated particle fuel form from high temperature gas cooled reactors, direct reactor auxiliary cooling system (DRACS) passive decay removal of liquid metal fast reactors, and the transparent, high volumetric heat capacitance liquid fluoride salt working fluids - Flibe - from molten salt reactors. This combination of fuel and coolant enables FHRs to operate in a high-temperature low-pressure design space that has beneficial safety and economic implications. The PB-FHR reactor relies on a pebble bed approach and pebble bed reactors are in a sense the poster child for multiscale analysis. The lower length-scale simulator for pebble reactor cores comprises three physics: neutronics (OpenMC), thermal-fluids (Nek5000) and fuel performance (BISON). As part of center of excellence ongoing research efforts we have developed “Cardinal”, a new tool platform for lower length-scale simulation. Cardinal tightly couples all three physics and leverages advances in MOOSE such as the MultiApp system and the concept of MOOSE-wrapped Apps. Moreover it is designed from the ground-up to scale on massively parallel architectures and perform well on world-class super-computing architectures. In this report we describe the design of Cardinal and present a demo of the application of Cardinal to an FHR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Wellbore Leakage Mitigation Using Advanced Mineral Precipitation Strategies (Final Scientific/Technical Report)

This research project, entitled Wellbore Leakage Mitigation using Advanced Mineral Precipitation Strategies, was directed toward advancing mineral precipitation technologies to seal wellbore leaks and other potential carbon dioxide (CO 2 ) leakage pathways, including compromised wellbore cement and fracture networks of varying geometries throughout the wellbore and surrounding formation. The advanced mineral sealing techniques were evaluated in the laboratory and the field to expand the range of temperature, pressure, and chemical conditions where mineral precipitation could be used. Rates of enzymatically or thermally induced calcium carbonate precipitation (EICP, TICP) were determined as well as rates of enzyme inactivation at elevated temperatures (>60 °C). Immobilization was shown to enhance the thermal stability of urease enzyme and provide protection from inhibition in low pH conditions. Mineral seals promoted by EICP and TICP were used to seal fractured composite (cement/sandstone) and shale cores in high pressure reactors operated at temperatures greater than 55 °C and 130 °C, respectively. A computational model was updated to model processes of EICP and TICP. The work resulted in a successful field test, which showed that EICP in the presence of low pH fluids (CO 2 -impacted brine) could promote permeability reduction and seal a channel in the near-wellbore environment.

54 ENVIRONMENTAL SCIENCES↗

Next Generation Nuclear Plant Phenomena Identification and Ranking Tables (PIRTs) Volume 2: Accident and Thermal Fluids Analysis PIRTs

An accident, thermal fluids, and reactor physics phenomena identification and ranking process was conducted by a panel of experts on the next generation nuclear plant (NGNP) design (consideration given to both pebble-bed and prismatic gas-cooled reactor configurations). Safety-relevant phenomena, importance, and knowledge base were assessed for the following event classes: (1) normal operation (including some reactor physics aspects), (2) general loss of forced circulation (G-LOFC), (3) pressurized loss-of-forced circulation (P-LOFC), (4) depressurized loss-of-forced circulation (D-LOFC), (5) air ingress (following D-LOFC), (6) reactivity transients - including anticipated transients without scram (ATWS), (7) processes coupled via intermediate heat exchanger (IHX) (IHX failure with molten salt), and (8) steam/water ingress. The panel's judgment of the importance ranking of a given phenomenon (or process) was based on the effect it had on one or more figures of merit or evaluation criteria. These included public and worker dose, fuel failure, and primary (and other safety) system integrity. The major phenomena of concern that were identified and categorized as high importance combined with medium to low knowledge follow: (1) core coolant bypass flows (normal operation), (2) power/flux profiles (normal operation), (3) outlet plenum flows (normal operation), (4) reactivity-temperature feedback coefficients for high-plutonium-content cores (normal operation and accidents), (5) fission product release related to the transport of silver (normal operation), (6)emissivity aspects for the vessel and reactor cavity cooling system (G-LOFC), (7) reactor vessel cavity air circulation and heat transfer (G-LOFC), and (8)convection/radiation heating of upper vessel area (P-LOFC).

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗