Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Impacts of the Addition of Sodium Reactor Experiment (SRE) and DR-3 Fuel from H-Canyon to Tank 40 on Acid Stoichiometry and Hydrogen Production

H-Canyon plans to discard Sodium Reactor Experiment (SRE) material that is currently stored in Tanks 16.3 and 16.4. Savannah River Remediation (SRR) determined that a portion of the SRE material can be added to Sludge Batch 9 (SB9) in Tank 40 and the remainder will be added to Sludge Batch 10 (SB10) that is currently being prepared in Tank 51. A processing flowsheet for both the nitric-formic acid flowsheet and the nitric-glycolic acid flowsheet were previously developed for SB9 sludge-only and coupled operation with the Actinide Removal Process – Modular Caustic Side Solvent Extraction Unit (ARP-MCU) and the Salt Waste Processing Facility (SWPF). Due to the compositional change in Tank 40 after the addition of SRE material, it is necessary to determine the influence on the acid stoichiometry operating window and hydrogen production for SB9 processing. An assessment was completed to address the influence of an addition of SRE and DR-3 Fuel from H-Canyon on the chemistry of Tank 40, the defined acid stoichiometry window (with and without SWPF streams) for the nitric-formic and nitric-glycolic acid flowsheets, and the resulting influence of the hydrogen production. Hydrogen production during the SRAT/SME cycles consists of thermolytic, radiolytic, and catalytic hydrogen. For the nitric-formic acid flowsheet, catalytic hydrogen dominates the hydrogen production during DWPF operation mode for the SRAT and SME vessels. This report was written to summarize that assessment. No SRNL testing is needed prior to adding up to 7,100 additional gallons of SRE and DR-3 Fuel from H-Canyon to Tank 40. Also, the addition of SRE will not exceed the Shielded Cells reported values for catalytic hydrogen for either the nitric-formic acid flowsheet (Technical Safety Requirement (TSR) limit of 0.15 lb/h) or the nitric-glycolic acid flowsheet (TSR limit 0.024 lb/h). The addition of the ARP stream from SWPF and the use of the nitric-glycolic acid flowsheet are both expected to decrease hydrogen generation, leading to a larger safety margin in the CPC.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Applied Science Investigations to Facilitate Closure of the F-Area and H-Area Seepage Basins

This report provides a roadmap of applied science studies that will facilitate reaching long term monitoring end state corrective actions for groundwater contamination at the F-Area Seepage Basins and the H-Area Seepage Basins at the Savannah River Site in Aiken, SC. The F-Area and H-Area Seepage Basins are waste units on the Savannah River Site in Aiken, SC at which low-level radioactive solutions were disposed into unlined basins, resulting in groundwater contamination. The current contaminants of interest in the groundwater are tritium, iodine-129, strontium-90, uranium isotopes and nitrate. Remediation at both sites has continued since 1988, consisting of closure and capping of the basins, operation of a groundwater pump-and-treat system from 1997 to 2004, and replacement of this system with a comprehensive in situ attenuation-based remedy. This report was requested by the U.S. Department of Energy - Office of Environmental Management in consultation with the Savannah River National Laboratory and Savannah River Nuclear Solutions - Area Completions Projects to provide a scientific basis for proactively addressing groundwater issues that may need to be resolved prior to final corrective actions at the F-Area and H-Area Seepage Basins.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

H-Canyon exhaust tunnel LiDAR data request for information review and release

This request is to release LiDAR data files acquired by SRNL R&D Engineering and H-Area Operations and Engineering while performing scans of the interior of the H-Canyon Exhaust tunnel. LiDAR data includes 3-dimensional (3D) point cloud data sets and panoramic digital images of the interior tunnel wall surfaces. Presently two deployments have been completed, the first in November 2019, Fig. 1, and the second in June of 2020. This request is for the release of the data collected during those two deployments. Detailed information on the deployment and data collected can be found in SRS document C-ESR-H-00072, “November 2019 Initial Deployment of LiDAR”. It is planned to perform ongoing scans at approximately 6-month intervals, the purpose of the deployments is to evaluate the usefulness of the data collected to enable quantitative measurements such as tunnel dimensions and rate of surface erosion and as a precursor to a potential deployment of a LiDAR system on the tunnel inspection crawler.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Fundamental Understanding of Methane-Carbon Dioxide-Water (CH 4 -CO 2 - H 2 O) Interactions in Shale Nanopores under Reservoir Conditions (Quarterly Report)

Shale is characterized by the predominant presence of nanometer-scale (1-100 nm) pores. The behavior of fluids in those pores directly controls shale gas storage and release in shale matrix and ultimately the wellbore production in unconventional reservoirs. Recently, it has been recognized that a fluid confined in nanopores can behave dramatically differently from the corresponding bulk phase due to nanopore confinement. CO 2 and H 2 O, either preexisting or introduced, are two major components that coexist with shale gas (predominately CH 4 ) during hydrofracturing and gas extraction. Note that liquid or supercritical CO 2 has been suggested as an alternative fluid for subsurface fracturing such that CO 2 enhanced gas recovery can also serve as a CO 2 sequestration process. Limited data indicate that CO 2 may preferentially adsorb in nanopores (particularly those in kerogen) and therefore displace CH 4 in shale. Similarly, the presence of water moisture seems able to displace or trap CH 4 in shale matrix. Therefore, fundamental understanding of CH 4 -CO 2 -H 2 O behavior and their interactions in shale nanopores is of great importance for gas production and the related CO 2 sequestration. This project focuses on the systematic study of CH 4 -CO 2 -H 2 O interactions in shale nanopores under high-pressure and high temperature reservoir conditions. The proposed work will help develop new stimulation strategies to enable efficient resource recovery from fewer and less environmentally impactful wells.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2023

Analysis of H-Canyon Process Tanks in Preparation of Consolidation and Blending for HALEU Fuels

High-Assay Low- Enriched Uranium (HALEU) fuels are being developed to support the replacement of Highly Enriched Uranium (HEU) fuels used in U.S. High-Performance Research Reactors (USHPRR) as well as advanced nuclear power reactor designs. The projected demand for HALEU far exceeds the supply and studies are underway to assess various options to partially mitigate the potential short supply. The H Canyon facility at the Savannah River Site (SRS) Low Enriched Uranium (LEU) containing 4.95% U-235 from the reprocessing of highly enriched foreign and domestic research reactor fuel for the Tennessee Valley Authority’s (TVA) commercial power reactor market for several decades. The production of LEU at the H-Canyon facility can be readily transitioned to produce 19.75% HALEU solutions from the current separated inventory of purified HEU solutions in H-Canyon storage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

IER-580 CED-3b: Experiment Execution Summary for the Pulsed-Neutron Die-Away Experiments (PNDA) with H 2 O

This report summarizes new experiments performed with H 2 O for IER-580, a testbed for pulsed-neutron die-away (PNDA) experiments at Lawrence Livermore National Laboratory (LLNL). The experiments will become high-quality benchmarksthat serve to optimize and validate thermal neutron scattering laws (TSLs) of H 2 O, which are high-priority nuclear data for the Department of Energy’s Nuclear Criticality Safety Program (NCSP). The report presents the details of the measurements conducted in October of 2023, including the experimental set-up (PNDA equipment and H 2 O targets) and all experimentally measured data. The report gives the fitted decay constants for the die-away curves of each target sample. It also provides the tabulated data for the die-away curves in the appendices.

42 ENGINEERING↗
DOE OSTI2024

Advanced Oxygen-Free Electrolyzer for Ultra-Low-Cost H 2 Storage for Fossil Plants (Final Technical Report)

DOE’s Office of Fossil Energy and Carbon Management has determined that long-duration energy storage solutions co-located with fossil energy assets offer significant benefits to the fossil industry, electric utilities, and customers. T2M Global has developed an Advanced O 2 -Free Electrolyzer System (AES) Technology for low-cost, long-duration H 2 energy storage for fossil plants. The MW-class AES Module conceptual design aims to upgrade stranded assets (dilute/waste syngas streams, excess electricity, and waste heat) at fossil plants to higher value H 2 for additional revenue and greater sustainability. The H 2 energy storage equips fossil plants with the load following capability needed for the lucrative grid-support services market created by Variable Renewable Energy resources.

08 HYDROGEN↗
DOE OSTI2025

Data Integration and Visualization for Enhanced Resilience and Sustainability in Hydropower (DIVERS-H)

U.S. hydropower plants face potential threats from shrinking water supply, rising demands, and warmer stream temperatures from various causes. Power plant owners, operators, and regulators require new tools to take advantage of and interpret the diverse range of scientific data being produced by both observational methods (for example, satellite, radar, stream gauges) and computer modeling methods that evaluate and predict how earth's dynamic systems (atmosphere, oceans, land surface, and sea ice) are changing and interacting. Combining datasets such as these with AI-based analyses introduces a novel decision support system to help users anticipate and address potential impacts on power generation stations. This new technology has been named DIVERS-H for "Data Integration and Visualization for Enhanced Resilience and Sustainability in Hydropower." In Phase I, technical feasibility was established with the development and demonstration of all the new technologies that are required. Most notably, DIVERS-H will use new artificial intelligence (AI) methods to capture the complex dynamics of water availability, demand, and environmental changes. In addition, new data management software was developed, and a prototype user interface was implemented as the precursor to a full scale decision support system. With technical research complete, the project focus now shifts to development of a commercial software product to provide users with actionable insight into water availability and the risk/resilience of critical systems at their locations of interest. Although DIVER-H was originally conceived as a tool for hydroelectric power applications, the same underlying technology can be readily applied to other water-consuming systems including coal, natural gas, oil, and nuclear power plants.

Chaudhary, Aashish [Kitware, Inc., Clifton Park, N↗
DOE OSTI2025

Investigating the Impact of Absorbed Surface Impurities (CO, CO 2 , CH 4 , and H 2 O) on Getter Rate Performance

This report provides an overview of engineering and experimental efforts to establish a new capability for measuring H2 uptake rates for Tritium Producing Abosrber Rod (TPBAR) getter materials. This new system was used to gain a better understanding of the impact of contaminant species (CO 2 , CO, CH 4 , and H 2 O) on getter performance under relevant hydrogen uptake conditions (350 °C, 20 torr). Herein, we successfully established a high-resolution gravimetric sorption (HRGS) system in a flow through configuration that can measure sample mass changes with high resolution (1 µg or 10 µg) over long experiment times (days), high temperature, and varying pressures. We coupled this capability with an in-line universal gas analyzer (UGA) system to characterize potential surface chemistry side reactions occurring after contaminant gas exposure. The major findings of this study suggest that methane and CO have the most detrimental effects on getter H 2 uptake performance showing large changes in rate after exposure compared to CO 2 and water. The effect of these contaminant species did not influence getter sample capacity (~ 1.8 wt% H 2 ). After CO and methane exposure, changes in getter rate were accompanied by observable Ni-surface defects and pinholes via SEM imaging suggesting possible Ni- layer corrosion. Additionally, the increase in C and O signal in the zircaloy layer, observed via EDX, point to C and O species transport through the getter sample resulting in the formation of carbides and oxide species. Thus, co-exposure studies where mixed gases or water vapor are introduced together will be important to further understand what mechanisms are contributing to Ni-layer corrosion and changes in getter performance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Hydrogen Education for a Decarbonized Global Economy (H 2 EDGE) (Final Technical Report)

The energy sector is undergoing rapid growth and transformation, creating urgent demand for a skilled workforce to support emerging technologies and resilient systems. Hydrogen is an emerging solution for “hard to abate” sectors, including heavy industry and transportation that also provides optionality for the electric system and enables long‑duration energy storage. As hydrogen scales from traditional industrial uses to new applications, success depends on knowledgeable engineers, technicians, planners, and operators safely deploying hydrogen technologies across the full value chain: production, delivery, storage, and end use. The H 2 EDGE initiative, funded by the U.S. Department of Energy’s Hydrogen and Fuel Cell Technologies Office from 2020 to 2025, was launched to prepare people for careers hydrogen and related technologies. Through its interactive approach, H 2 EDGE equipped stakeholders with knowledge and tools to build a reliable and sustainable energy future together. H 2 EDGE built a national network of academic and industry partners to deliver modular training, share open-access curricula, and engage diverse talent pipelines. The program leveraged EPRI’s extensive industry membership and expanded on the train-the-trainer model of the GridEd program to connect educators, employers, and community organizations across all regions of the U.S. New methods were introduced to more systematically map hydrogen competencies and assess curricula using traditional and AI-assisted approaches. Outcomes included delivery of professional short courses, developing university curriculum, sponsoring faculty and student projects, and engaging stakeholders through workshops, site tours, and webinars.

08 HYDROGEN↗
DOE OSTI2026

Catalytic Membrane Reactors Based on Carbon Molecular Sieve Hollow Fiber Membranes for Sustainable and Modular H 2 Production

We aimed to develop a catalytic membrane reactor (CMR) that couples water–gas shift (WGS) reaction with in-situ H 2 separation to produce blue H 2 and a CO 2 -rich stream from coal- and biomass-derived syngas. Our core approach employs high-permeance carbon molecular sieve (CMS) hollow-fiber membranes (HFMs) with strong gas separation ability, which we further integrate into catalytic membrane reactors to intensify H 2 production and CO 2 capture in a single unit. Three organizations with complementary skills collaborated to achieve the goal, including the University at Buffalo (UB), Los Alamos National Laboratory (LANL), and Trimeric Corporation (Trimeric).

08 HYDROGEN↗
DOE OSTI2026

Technology Maturation Plan for Catalytic Membrane Reactors Based on Carbon Molecular Sieve Hollow Fiber Membranes for Sustainable and Modular H 2 Production

The overarching objective of the proposed project was to demonstrate a process-intensified approach to economically viable, modular H 2 production from waste biomass using catalytic membrane reactors (CMRs) based on carbon molecular sieve (CMS) hollow-fiber membranes. Specifically, the CMRs were developed to selectively remove H 2 during the high-temperature water-gas shift (WGS) reaction to circumvent thermodynamic limitations on converting CO to CO 2 and H 2 . To this end, our core technical activities were to (1) develop high-performance CMRs based on thermally stable, processible polymer-derived CMS membranes and (2) design and prepare new multicomponent CO 2 -tolerant nano-catalysts using a unique flame-based aerosol process for WGS reaction.

08 HYDROGEN↗
DOE OSTI2024

TCR-H: explainable machine learning prediction of T-cell receptor epitope binding on unseen datasets

Artificial-intelligence and machine-learning (AI/ML) approaches to predicting T-cell receptor (TCR)-epitope specificity achieve high performance metrics on test datasets which include sequences that are also part of the training set but fail to generalize to test sets consisting of epitopes and TCRs that are absent from the training set, i.e., are ‘unseen’ during training of the ML model. We present TCR-H, a supervised classification Support Vector Machines model using physicochemical features trained on the largest dataset available to date using only experimentally validated non-binders as negative datapoints. TCR-H exhibits an area under the curve of the receiver-operator characteristic (AUC of ROC) of 0.87 for epitope ‘hard splitting’ (i.e., on test sets with all epitopes unseen during ML training), 0.92 for TCR hard splitting and 0.89 for ‘strict splitting’ in which neither the epitopes nor the TCRs in the test set are seen in the training data. Furthermore, we employ the SHAP (Shapley additive explanations) eXplainable AI (XAI) method for post hoc interrogation to interpret the models trained with different hard splits, shedding light on the key physiochemical features driving model predictions. TCR-H thus represents a significant step towards general applicability and explainability of epitope:TCR specificity prediction.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Importance of the Rotational Transform for L–H Transitions in the TJ-II Stellarator

We study the effect of the rotational transform profile on the L–H confinement transitions in the neutral beam-heated plasmas in the TJ-II stellarator. The rotational transform profile in the vacuum is determined by the external coil currents but is modified by the plasma current, Ip. We find that L–H confinement transitions systematically occur when the configuration and plasma current are such that a low-order rational is placed in the plasma edge region, with a distribution centered around ρ=0.8±0.05. It is suggested that magnetohydrodynamic turbulence plays an important role in triggering the L–H transitions at TJ-II.

van Milligen, Boudewijn Philip (ORCID:000000015344↗
DOE OSTI2022

Effects of unique band structure of h -BN probed by photocurrent excitation spectroscopy

Here, by employing a photocurrent excitation spectroscopy measurement, a direct bandgap of ~6.46 eV has been resolved for the first time in thick B-10 enriched h-BN films. Together with previous band calculations, an unconventional energy diagram has been constructed to capture the unique features of h-BN: h-BN has a minimum direct bandgap of ~6.5 eV and a bandgap of ~6.1 eV which is indirect with the conduction band minimum (CBM) at M-point and valence band maximum (VBM) at K-point in the Brillouin zone, and the energy levels of the donor and acceptor impurities are measured relative to CBM and VBM, respectively.

42 ENGINEERING↗
DOE OSTI2020

Using the Baryonic Tully–Fisher Relation to Measure H{sub o}

We explore the use of the baryonic Tully–Fisher relation (bTFR) as a new distance indicator. Advances in near-IR imaging and stellar population models, plus precise rotation curves, have reduced the scatter in the bTFR such that distance is the dominant source of uncertainty. Using 50 galaxies with accurate distances from Cepheids or the tip magnitude of the red giant branch, we calibrate the bTFR on a scale independent of H {sub o}. We then apply this calibrated bTFR to 95 independent galaxies from the SPARC sample, using CosmicFlows-3 velocities, to deduce the local value of H {sub o}. We find H {sub o} = 75.1 ± 2.3 (stat) ±1.5 (sys) km s{sup −1} Mpc{sup −1}.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

The Arecibo Galaxy Environment Survey. XII. Optically Dark H i Clouds in the Leo I Group

Using data from the Arecibo Galaxy Environment Survey, we report the discovery of five H i clouds in the Leo I group without detected optical counterparts. Three of the clouds are found midway between M96 and M95, one is only from the southeast side of the well-known Leo Ring, and the fifth is relatively isolated. H i masses range from 2.6 × 10 6 M ⊙ to 9.0 × 10 6 M ⊙ , and velocity widths (W50) range from 16 to 42 km s -1 . Although a tidal origin is the most obvious explanation, this formation mechanism faces several challenges. For the most isolated cloud, the difficulties are its distance from neighboring galaxies and the lack of any signs of disturbance in the H i disks of those systems. Some of the clouds also appear to follow the baryonic Tully–Fisher relation between mass and velocity width for normal, stable galaxies, which is not expected if they are tidal in origin. Three clouds are found between M96 and M95 that have no optical counterparts but have otherwise similar properties and locations to the optically detected galaxy LeG 13. While overall we favor a tidal debris scenario to explain the clouds, we cannot rule out a primordial origin. If the clouds were produced in the same event that gave rise to the Leo Ring, they may provide important constraints on any model attempting to explain that structure.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Elucidating the Formation of Ethynylbutatrienylidene (HCCCHCCC; X 1 A′) in the Taurus Molecular Cloud (TMC-1) via the Gas-phase Reaction of Tricarbon (C 3 ) with the Propargyl Radical (C 3 H 3 )

Abstract The recent astronomical detection of ethynylbutatrienylidene (HCCCHCCC)—a high-energy isomer of triacetylene (HCCCCCCH) and hexapentaenylidene (H 2 CCCCCC)—in TMC-1 puzzled the laboratory astrophysics community since proposed reaction pathways could not synthesize the ethynylbutatrienylidene (HCCCHCCC) under cold molecular cloud conditions. Exploiting a retrosynthesis coupled with electronic structure calculations and astrochemical modeling, we reveal that observed fractional abundance of ethynylbutatrienylidene (HCCCHCCC) of 1.3 ± 0.2 × 10 −11 can be quantitatively replicated though the barrierless and exoergic reaction of tricarbon (C 3 ) with the resonantly stabilized propargyl radical (C 3 H 3 ) after a few 10 5 yr—typical ages of cold molecular clouds. Our study provides persuasive evidence that previously assumed “dead” reactants such as tricarbon (C 3 ) and the propargyl radical (C 3 H 3 ) provide fundamental molecular building blocks in molecular mass growth processes leading to exotic, high-energy isomers of hydrocarbons: ethynylbutatrienylidene (HCCCHCCC).

79 ASTRONOMY AND ASTROPHYSICS↗