Power supplies.
Power supplies for spacecraft including static and dynamic solar systems, batteries, fuel cells and nuclear systems
SOLAR POWER SOURCE↗
SEARCH · Engineering Papers
Results for “Fuel Cells”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Space Electrochemical Research and Technology
This document contains the proceedings of NASA's third Space Electrochemical Research and Technology (SERT) Conference, held at the NASA Lewis Research Center on April 9-10, 1991. The objective of the conference was to assess the present status and general thrust of research and development in those areas of electrochemical technology required to enable NASA missions into the next century. The conference provided a forum for the exchange of ideas and opinions of those actively involved in the field, in order to define new opportunities for the application of electrochemical processes in future NASA missions. Papers were presented in three technical areas: the electrochemical interface, the next generation in aerospace batteries and fuel cells, and electrochemistry for nonenergy storage applications. This document contains the abstracts of the papers presented.
Electrochemistry↗
Electrical power and sequential systems
Power sources for Gemini spacecraft electrical systems, load sharing of fuel cells during flight, and sequential system for electrical control of spacecraft
POWER SUPPLY↗
Sealing of silver oxide-zinc storage cells Quarterly report, 23 Jun. - 23 Sep. 1967
Microminiature fuel cell design and tests, and gas discharge data on silver zinc cells
Source record↗
A flooded-starved design for nickel-cadmium cells
A somewhat analogous situation among groupings of alkaline fuel cells is described where the stochastic aspects were much more accurately documented and then it was illustrated how this problem was eliminated using straight forward principles of pore size engineering. This is followed by a suggested method of adapting these same design principles to nickel-cadmium cells. It must be kept in mind that when cells are cycled to typically twenty percent depth of discharge that eighty percent of the weight of the cell is simply dead weight. Some of this dead weight might be put to better use by trading it for a scheme that would increase the time during which the cell would be working more closely to its optimum set of operating parameters.
Thaller, L. H.↗
A transient heat transfer and thermodynamic analysis of the Apollo service module propulsion system. Vol. I, phase I - Transient thermal analysis Final report, 28 Jul. 1964 - 28 Jul. 1965
Transient heat transfer and thermodynamic behavior analysis for Apollo service module propulsion system - fuel cell effect on overheating
THERMODYNAMIC PROPERTY↗
Apollo logistics support systems molab studies. radioisotope power systems for a lunar surface vehicle
Combination of fuel cell system and nuclear radio isotope system to provide electric power for lunar surface exploration mission
LUNAR SURFACE↗
Cryogenic Fuel Aviation – Challenges and Opportunities
NASA aeronautics goals include pioneering new technology to increase efficiency and reduce emissions from air travel. The feasibility of using of on-board cryogenic fuels systems in combination with fuel cells, high efficiency engines, and electric motors for high efficiency commercial transport aircraft is being examined at NASA in collaborations with external partners. Growing emphasis on next generation air transportation resulted in the development of strategic investigations into cryogenic fuels aviation, including roadmaps for maturing new technologies, needs to improve testing and manufacturing capabilities, and the requirements for establishing regulatory and certification standards. A NASA cross-organizational multidisciplinary project team is exploring new aircraft architectures, enabling materials, and the engineering challenges associated with cryogenic fuels for aircraft. The engineering challenges include high performance cryogenic, thermal management, and power/propulsion components and subsystems to tackle the challenging problem of development of commercially viable aircraft that would radically transform air transportation.
liquid natural gas↗
ELECTRICAL ENERGY FROM BIOLOGICAL SYSTEMS
Biochemical fuel cell - an answer to waste management in closed ecological systems - electric energy source
WASTE DISPOSAL↗
Energy Storage for Lunar Surface Exploration
This paper presents the updated results of a previous NASA study funded under the Advanced Exploration Systems (AES) Modular Power Systems (AMPS) project. This work focuses on generating high-level system sizing relationships for two lunar surface locations that serve as bounding conditions for most other locations. Four critical parameters are considered to provide sizing data: specific energy, energy density, specific power, and power density. Given the energy storage requirements or customer power demand for a lunar mission location, the data presented in this paper provides a method to determine the critical parameter values of a Regenerative Fuel Cell (RFC) system in order to perform high-level mission architecture trades.
surface power systems↗
Power Systems Research at MSFC
Power system developments for rockets and space flights - fuel cells, improved zinc-silver oxide battery, brushless dc motors, switching transformer regulator, and Pegasus electricity
ELECTRIC MOTOR↗
Sealing of silver oxide-zinc storage cells Quarterly report, 23 Sep. - 23 Dec. 1967
Rechargeable micro fuel cells in controlling internal pressure of secondary silver oxide-zinc cells for operation in hermetically sealed condition
Source record↗
An assessment of advanced technology for industrial cogeneration
The potential of advanced fuel utilization and energy conversion technologies to enhance the outlook for the increased use of industrial cogeneration was assessed. The attributes of advanced cogeneration systems that served as the basis for the assessment included their fuel flexibility and potential for low emissions, efficiency of fuel or energy utilization, capital equipment and operating costs, and state of technological development. Over thirty advanced cogeneration systems were evaluated. These cogeneration system options were based on Rankine cycle, gas turbine engine, reciprocating engine, Stirling engine, and fuel cell energy conversion systems. The alternatives for fuel utilization included atmospheric and pressurized fluidized bed combustors, gasifiers, conventional combustion systems, alternative energy sources, and waste heat recovery. Two advanced cogeneration systems with mid-term (3 to 5 year) potential were found to offer low emissions, multi-fuel capability, and a low cost of producing electricity. Both advanced cogeneration systems are based on conventional gas turbine engine/exhaust heat recovery technology; however, they incorporate advanced fuel utilization systems.
Moore, N.↗
Center for High-Efficiency Electrical Technologies for Aircraft: Phase I Final Report
Under the University Leadership Initiative (ULI), the Center for High-Efficiency for Electrical Technologies (CHEETA) was established to develop and mature early-stage technologies pertaining to hydrogen-electric power and energy systems for aircraft. In particular, integration of these technologies on an aircraft system is envisioned to leverage the high specific energy content of liquid hydrogen (LH2) with fuel cell energy conversion and an electrically driven ducted fan system to provide an ultra-efficient propulsion drivetrain. For this concept, the LH2 system is not just used as an energy storage mechanism, but also as a cryogen to enable highly efficient superconducting electric systems. The end result of this concept is an integrated aircraft system with a quiet, efficient propulsion architecture that produces zero CO2, NOx, SOx, and particulate matter emissions at the vehicle level.
Hydrogen↗
Results from Symposium on Future Orbital Power Systems Technology Requirements
Technology deficiencies, adequacy of current programs, and recommendations for reducing the testing and risks involved in future orbital energy systems made at the NASA Symposium are summarized. Photovoltaic space power system problems, including structural dynamics and attitude control problems due to solar array flexing; solar cell radiation resistance, manufacturing capability, and cost reduction; solar arrays including inflatable arrays, spectrum selection to increase efficiency, and polymer coatings for cells; battery technology; the endurance data base for fuel cell and electrolysis technology, and power management were discussed. Other topics considered were laser/microwave power transmission, thermal management, nuclear power systems, and environmental interactions. It was concluded that a 'front end' system study is needed in each area and current programs for multi-hundred-kW power systems are underscoped.
Gorland, S.↗
The molten carbonate carbon dioxide concentrator - Cathode performance at high CO2 utilization
An experimental study of the cathode performance of the molten carbonate carbon dioxide concentrator (MCCDC) at typical gas concentrations is reported, and the behavior is described in terms of standard electrochemical kinetic analysis. Theoretical aspects of the MCCDC are discussed, including the current-generating processes, the overpotential, and the reaction kinetics. A final working equation is derived, and the electrochemical cell is described. The parameters determined by the experiments include cathode overpotentials and removal and current efficiency as a function of current density, as well as carbon dioxide removal rate as a function of flow rate. The results are compared with data for other cells; the agreement with data for the molten carbonate fuel cell suggests that the major difference between the two cells is in the wetting characteristics. The MCCDC achieves high removal efficiencies at high current efficiencies. The lowest current efficiency recorded was 80 percent, and at most current densities, current efficiencies were above 100 percent.
Weaver, J. L.↗
Study of multi-megawatt technology needs for photovoltaic space power systems, volume 2
Possible missions requiring multimegawatt photovoltaic space power systems in the 1990's time frame and power system technology needs associated with these missions are examined. Four specific task areas were considered: (1) missions requiring power in the 1-10 megawatt average power region; (2) alternative power systems and component technologies; (3) technology goals and sensitivity trades and analyses; and (4) technology recommendations. Specific concepts for photovoltaic power approaches considered were: planar arrays, concentrating arrays, hybrid systems using Rankine engines, thermophotovoltaic approaches; all with various photovoltaic cell component technologies. Various AC/DC power management approaches, and battery, fuel cell, and flywheel energy storage concepts are evaluated. Interactions with the electrical ion engine injection and stationkeeping system are also considered.
Peterson, D. M.↗
Fuel Reformer Nozzle Development
The fellowship work this summer will be in support of the development of a fuel mixer for a liquid fuel reformer that is upstream of a fuel cell. Tasks for the summer shall consist of design of a fuel mixer, setup of the laser diagnostics for determining the degree of fuel mixing, and testing of the fuel mixer. The fuel mixer shall be a venturi section with fuel injected at or near the throat, and an air swirler upstream of the venturi. Data to determine the performance of the mixer shall be taken using a Phase Doppler Particle Analyzer (PDPA).
Lai, Ming-Chia D.↗