Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flight dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Simulation, flight performance and control of Dynamics Explorers-A and -B spacecraft

This paper presents the results obtained from a study conducted to evaluate the dynamic behavior of Dynamics Explorers-A and -B spacecraft. The effects of environmental torques on the spacecraft motion, momentum buildup due to these torques, and the long appendages on the main body motion are studied using numerical simulations. The numerical results are compared with flight data and are found to be in good agreement. A control philosophy for DE-B to minimize the pitch axis drift is developed. The performance of DE-B in inverted mode and during the inversion maneuver as well as in the normal mode are studied. The spin ripple effect on DE-A due to the long appendages is analyzed and the results are correlated with flight data.

Sellappan, R. G.↗

Development and Testing of a Drogue Parachute System for X-37 ALTV/B-52H Separation

Multiple scenarios were identified in which the X-37 approach and landing test vehicle (ALTV) catastrophically recontacts the B-52H carrier aircraft after separation. The most cost-effective recontact risk mitigation is the prelaunch deployment of a drogue parachute that is released after the X-37 ALTV has safely cleared the B-52H. After release, a fully-inflated drogue parachute takes 30 min to reach ground and results in a large footprint that excessively restricts the days available for flight. To reduce the footprint, a passive collapse mechanism consisting of an elastic reefing line attached to the parachute skirt was developed. At flight loads the elastic is stretched, allowing full parachute inflation. After release, drag loads drop dramatically and the elastic line contracts, reducing the frontal drag area. A 50 percent drag reduction results in an approximately 75 percent ground footprint reduction. Eleven individual parachute designs were evaluated at flight load dynamic pressures in the High Velocity Airflow System (HIVAS) at the Naval Air Warfare Center (NAWC), China Lake, California. Various options for the elastic reefing system were also evaluated at HIVAS. Two best parachute designs were selected from HIVAS to be carried forward to flight test. Detailed HIVAS test results are presented in this report.

Whitmore, Stephen A.↗

Development and Testing of a Drogue Parachute System for X-37 ALTV/B-52H Separation

Multiple scenarios were identified in which the X-37 approach and landing test vehicle (ALTV) catastrophically recontacts the B-52H carrier aircraft after separation. The most cost-effective recontact risk mitigation is the prelaunch deployment of a drogue parachute that is released after the X-37 ALTV has safely cleared the B-52H. After release, a fully-inflated drogue parachute takes 30 min to reach ground and results in a large footprint that excessively restricts the days available for flight. To reduce the footprint, a passive collapse mechanism consisting of an elastic reefing line attached to the parachute skirt was developed. At flight loads the elastic is stretched, allowing full parachute inflation. After release, drag loads drop dramatically and the elastic line contracts, reducing the frontal drag area. A 50-percent drag reduction results in an approximately 75-percent ground footprint reduction. Eleven individual parachute designs were evaluated at flight load dynamic pressures in the High Velocity Airflow System (HIVAS) at the Naval Air Warfare Center (NAWC), China Lake, California. Various options for the elastic reefing system were also evaluated at HIVAS. Two best parachute designs were selected from HIVAS to be carried forward to flight test. Detailed HIVAS test results are presented in this report.

Whitmore, Stephen A.↗

Packed Bed Reactor Experiment (PBRE)-2: Pressure Drop Measurements in Microgravity

Single and two-phase flow through porous media are encountered on ground and in space in numerous applications related to life support systems, fuel cells, chemical/materials processing and transporting nutrients to plants. These systems operate differently in the microgravity environment encountered in space travel because the density differences no longer cause the phases to separate or “drain” under the body force of gravity. In the absence of gravity, the interfacial or capillary forces play a more significant role in determining the operational variables such as phase distribution, liquid holdup, and pressure drop especially when the liquid inertia and viscous forces are at minimum. Lower liquid flow rates in air-water two-phase flows represent the case for most of the space processes that depend on two-phase flows in porous media. The Packed Bed Reactor Experiment (PBRE) was developed and flown on the International Space Station (ISS) by NASA to extend a series of fundamental studies of gas-liquid flows through porous media. The goal of the this series of flight experiments (PBRE-1 and PBRE-2) is to better understand the hydrodynamics of two phase flows in porous media in flow regimes dominated by inertia and viscous effects and understanding the role of the interfacial forces and their role in determining the flow dynamics. The flight experiments were preceded by a series of low gravity experiments performed on the low gravity aircraft. These experiments led to the development of a semi-empirical two-phase pressure drop and flow pattern transition in support of a number of reactor beds planned for water reclamation processes onboard of the international space station. The PBRE flight experiment was designed to deliver a wide range of tightly controlled gas (nitrogen) and liquid (water) flows to one of two interchangeable test sections differing only in the type of internal packing material. In this paper, we describe the PBRE-2 experiment and present preliminary low gravity data on pressure drop and compare with semi-empirical model pressure drop predictions. This work is supported by the National Aeronautics and Space Administration (NASA) under grant no. 80NSSC20K0830

Suratman Number↗

Pressure Gradient and Gas Hold-Up in Two-Phase Flows through Porous Media in Microgravity

Single and two-phase flow through porous media are encountered on ground and in space in numerous applications related to life support systems, fuel cells, chemical/materials processing and transporting nutrients to plants. These systems operate differently in the microgravity environment encountered in space travel because the density differences no longer cause the phases to separate or “drain” under the body force of gravity. In the absence of gravity, the interfacial or capillary forces play a more significant role in determining the operational variables such as phase distribution, liquid holdup, and pressure drop especially when the liquid inertia and viscous forces are at minimum. Lower liquid flow rates in air-water two-phase flows represent the case for most of the space processes that depend on two-phase flows in porous media. The Packed Bed Reactor Experiment (PBRE) was developed and flown on the International Space Station (ISS) by NASA to extend a series of fundamental studies of gas-liquid flows through porous media. The goal of the this series of flight experiments (PBRE-1 and PBRE-2) is to better understand the hydrodynamics of two phase flows in porous media in flow regimes dominated by inertia and viscous effects and understanding the role of the interfacial forces and their role in determining the flow dynamics. The flight experiments were preceded by a series of low gravity experiments performed on the low gravity aircraft. These experiments led to the development of a semi-empirical two-phase pressure drop and flow pattern transition in support of a number of reactor beds planned for water reclamation processes onboard of the international space station. The PBRE flight experiment was designed to deliver a wide range of tightly controlled gas (nitrogen) and liquid (water) flows to one of two interchangeable test sections differing only in the type of internal packing material. In this presentation, we describe the PBRE-2 experiment and present preliminary low gravity data on pressure drop and gas hold-up and compare with semi-empirical model pressure drop predictions.

Brian Motil↗

Further observations on maximum likelihood estimates of stability and control characteristics obtained from flight data

A maximum likelihood estimation method for flight test data is described. Flight results based on 3000 maneuvers from 30 aircraft on the effect of resolution and sampling rate on the estimates, on understanding the discrepancies previously observed in the magnitude of the Cramer-Rao bounds, on the scale effects on the derivative estimates obtained from dynamic aircraft flight maneuvers, and on the analysis of lateral-directional maneuvers obtained in turbulence, are presented.

Iliff, K. W.↗

Obtaining consistent models of helicopter flight-data measurement errors using kinematic-compatibility and state-reconstruction methods

A new method was developed for application of Kalman Filter/Smoothers to post-flight processing of helicopter flight test dynamic measurements. This processing includes checking for kinematic compatibility among the measurements, identification of a measurement error model, and reconstruction of both measured and unmeasured time histories. Emphasis is placed on identification of a parametric measurement error model which is valid for a set of flight test data. This is facilitated through a new method of concatenating several maneuver time histories. The method also includes a model structure determination step which ensures that a physically realistic parameterization has been achieved. Application of the method to a set of BO-105 flight test data is illustrated. The resulting minimally parameterized error model is shown to characterize the measurement errors of the entire data set with very little variation in the parameter values. Reconstructed time histories are shown to have increased bandwidths and signal to noise ratios.

Fletcher, Jay W.↗

Forward Bay Cover Separation Modeling and Testing for the Orion Multi-Purpose Crew Vehicle

Spacecraft multi‐body separation events during atmospheric descent require complex testing and analysis to validate the flight separation dynamics model and to verify no recontact. NASA Orion Multi‐Purpose Crew Vehicle (MPCV) teams examined key model parameters and risk areas to develop a robust but affordable test campaign in order to validate and verify the Forward Bay Cover (FBC) separation event for Exploration Flight Test‐1 (EFT‐1). The FBC jettison simulation model is highly complex, consisting of dozens of parameters varied simultaneously, with numerous multi‐parameter interactions (coupling and feedback) among the various model elements, and encompassing distinct near‐field, mid‐field, and far‐field regimes. The test campaign was composed of component‐level testing (for example gas‐piston thrusters and parachute mortars), ground FBC jettison tests, and FBC jettison air‐drop tests that were accomplished by a highly multi‐disciplinary team. Three ground jettison tests isolated the testing of mechanisms and structures to anchor the simulation models excluding aerodynamic effects. Subsequently, two air‐drop tests added aerodynamic and parachute parameters, and served as integrated system demonstrations, which had been preliminarily explored during the Orion Pad Abort‐1 (PA‐1) flight test in May 2010. Both ground and drop tests provided extensive data to validate analytical models and to verify the FBC jettison event for EFT‐1, but more testing is required to support human certification, for which NASA and Lockheed Martin are applying knowledge from Apollo and EFT‐1 testing and modeling to develop a robust but affordable human spacecraft capability.

Ali, Yasmin↗

A flexible flight display research system using a ground-based interactive graphics terminal

Requirements and research areas for the air transportation system of the 1980 to 1990's were reviewed briefly to establish the need for a flexible flight display generation research tool. Specific display capabilities required by aeronautical researchers are listed and a conceptual system for providing these capabilities is described. The conceptual system uses a ground-based interactive graphics terminal driven by real-time radar and telemetry data to generate dynamic, experimental flight displays. These displays are scan converted to television format, processed, and transmitted to the cockpits of evaluation aircraft. The attendant advantages of a Flight Display Research System (FDRS) designed to employ this concept are presented. The detailed implementation of an FDRS is described. The basic characteristics of the interactive graphics terminal and supporting display electronic subsystems are presented and the resulting system capability is summarized. Finally, the system status and utilization are reviewed.

Hatfield, J. J.↗

Real-Time Pilot Inputs for Aircraft Dynamic Modeling

Real-time dynamic modeling and pilot displays are used to enable pilots to intuitively discover effective multi-axis inputs for aircraft dynamic modeling during flight tests. An F-16 nonlinear simulation flown by a pilot using a joystick and a laptop computer with real-time displays of relevant information is used to demonstrate the approach. Results show that pilots can use the real-time display to discover and implement effective and efficient multi-axis inputs for accurate dynamic modeling in flight. The real-time dynamic modeling results driving the pilot display can be used to certify that the acquired flight data are adequate for accurate dynamic modeling, thus avoiding postflight data analysis and modeling by an analyst to make that determination. Implications for pilot training and efficient flight testing are discussed.

Pilot Inputs↗

Space Launch System Liftoff and Separation Dynamics Analysis Tool Chain

A flexible, hierarchical tool chain that is being applied to NASA’s Space Launch System (SLS) for critical dynamics phenomena is described. This tool chain, called CLVTOPS, is used to investigate lateral liftoff movement of the vehicle as it departs and clears the mobile launch tower and separation of the two solid rocket boosters without collision with the core stage and payload. The toolset’s architecture was configured to take advantage of a modern software-engineering approach for maximum flexibility and utilization of open-source simulations and associated tools. As opposed to a “monolithic” approach, scripting languages were used to “bind” together a tool chain to configure and organize input data, execute and produce analysis results, and post-process these results to facilitate a rapid iterative analysis process to quickly address issues and pursue alternatives with emphasis on analysis automation. Key capabilities in the tool chain include processing and mining of very large data sets, a wide range of graphical depictions, and high-fidelity, physics-based simulations. The paper begins with a problem description and the motivation for liftoff and separation dynamics analysis followed by a historical survey of dynamics analyses for previous NASA human-rated launch vehicles. Details of the tool chain and its components are then introduced divided, first, into description of the scripting language architecture used to “bind” the simulation tools, programs, and scripts together and, second, the physics models and simulations. Representative analyses and data products are shown for liftoff and booster separation dynamics that provide in-depth insight to the tool chain’s capabilities. Supporting activities such as simulation tool chain verification, version archiving and data management, and training are addressed. The paper concludes with case examples on how the tool chain can be tailored to related aerospace dynamics analyses, both large and small. These patterns and techniques for SLS dynamics tool construction can be applied for other aerospace simulations.

6DOF↗

Comparison of Pre- and Post-Flight Estimations of Pitch Damping Coefficients for Unguided Entry Vehicles

Introduction: Pre-flight predictions of pitch damping coefficient (𝐶!!+𝐶!"̇)curves are used in entry simulations to determine flight readiness and if any dynamic remediation strategies are required. Accurate characterization of these pitch damping coefficient curves is crucial for mission success. Historically, pre-flight estimations of these curves are derived experimentally either via ballistic range testing or with 1-degree-of-freedom (DOF) free-or forced-oscillation wind tunnel testing. Methodology:With post-flight best-estimated trajectories, a fitting procedure as described in Karlgaard, et. al. [1] is used to compare pre-and post-flight pitch damping coefficients. This technique relies on an assumed analytical form of the trajectory, a limited 3-DOF representation described in Schoenenbergerand Queen [2], which results in anEuler-Cauchy solution form.This solution assumes constant density,thus limited amplitude multi-peak windows of the trajectory are considered to populate the pitch damping-amplitudes pace. Fig. 1 shows preliminary estimations of the pitch damping coefficients estimated using the post-flight best estimated trajectoryfor MER B, using a3-amplitude-peak window. Important to note is that the Euler-Cauchy solution also assumes planar motion, thus coning or 𝛽contribution is not included. Further,the estimated post-flight pitch damping approximations and the pre-flight predictions shown are effective representations of pitch damping, or the integrated effect of the pitch damping coefficient over one pitch cycle at the corresponding cycle’s peak amplitude. Effective pitch damping coefficient curves provide more intuitive insights about where the vehicle is stable and permits readily processed comparisons between data-sets. It is important to note that most pitch damping curves, such as those reported in aerodatabases and utilized in flight mechanics trajectory simulations, are represented in instantaneous angle-of-attack space distinct from what is presented in Fig 1. The extracted post-flight pitch damping coefficient points show a wide range of values across a narrow band of amplitudes (Fig.1a), albeit centered on the published pre-flight approximation. This also applies to the prediction as a function of Mach in Fig1b, where the post-flight scatter points are centered around the pre-flight predictions, but the pre-flight predictions notably lack data aboveMach 5.Further tuning of the technique, such as changing the number of peaks considered in each stencil, resolving density in higher resolution, and employing more accurate fitting procedures (beyond scipy.curve_fit()), will be performed. PosterFocus:This study will apply this reconstruction method to the as-flown trajectories for the following unguided entry vehicles: MER A, MER B, IRVE3, Phoenix, Insight, Pathfinder, and SIAD. The pitch damping coefficient will be derived from these trajectories and compared with the pre-flight predictions. Comparing across different missions, entry environments, and vehicle geometries can inform where our pre-flight testing methodologies accurately capture the flight dynamics. Results will provide valuable insight into the accuracy of pre-flight predicted pitch damping curves. Beyond that, this method can shed light on how accurate these curves need to be, which can inform uncertainty ranges applied to pre-flight curves for other missions.

pitch damping coefficient↗

Computer-aided design of flight control systems

A computer program is presented for facilitating the development and assessment of flight control systems, and application to a control design is discussed. The program is a computer-aided control-system design program based on direct digital synthesis of a proportional-integral-filter controller with scheduled linear-quadratic-Gaussian gains and command generator tracking of pilot inputs. The FlightCAD system concentrates on aircraft dynamics, flight-control systems, stability and performance, and has practical engineering applications.

Stengel, Robert F.↗

Design of Launch Vehicle Flight Control Systems Using Ascent Vehicle Stability Analysis Tool

A launch vehicle represents a complicated flex-body structural environment for flight control system design. The Ascent-vehicle Stability Analysis Tool (ASAT) is developed to address the complicity in design and analysis of a launch vehicle. The design objective for the flight control system of a launch vehicle is to best follow guidance commands while robustly maintaining system stability. A constrained optimization approach takes the advantage of modern computational control techniques to simultaneously design multiple control systems in compliance with required design specs. "Tower Clearance" and "Load Relief" designs have been achieved for liftoff and max dynamic pressure flight regions, respectively, in the presence of large wind disturbances. The robustness of the flight control system designs has been verified in the frequency domain Monte Carlo analysis using ASAT.

Jang, Jiann-Woei↗

Detecting Risk and Anomalies in Airplane Dynamics Through Entropic Analysis of Time Series Data

Despite recent efforts to move away from traditional threshold exceedance detection methods for aircraft state monitoring, modern aircraft still rely on safety thresholds to communicate to pilots the identification of an anomaly in the aircraft when a threshold is surpassed. Current anomaly detection methods mainly depend on uninterpretable machine learning models to learn complex patterns and relationships contained in the time series data of aircraft. Although these methods are capable of identifying known anomalies, their deficiency in interpretability presents a challenge when translating them to different aircraft. To overcome this deficiency, entropic analysis of aircraft dynamics seeks to characterize the complexity, or lack thereof, of the aircraft dynamics prior to the development of a risk scenario. This complexity characterization provides a more straightforward summary of state changes in the dynamics of flight variables. To build a foundation for entropic analysis, we analyzed the complexity of unstable approaches, an anomalous event present in many of today’s aviation accidents. The analysis revealed a statistically significant difference in the complexity distribution of flight variables under a stable approach versus an unstable approach. These differences in complexity were especially notable minutes before an approach was identified as unstable. Moreover, the multiscale entropic analysis revealed the presence of signal complexity at multiple time scales across multiple time windows before landing. By capturing state changes and corrections in the aircraft dynamics using entropy, advanced, yet still interpretable, sensor systems based on entropic frameworks from this study can be constructed in the future using classical machine learning approaches.

Risk detection↗

Best Practices for Researching and Documenting Lessons Learned

Identification, resolution, and avoidance of technical and programmatic issues are important for ensuring safe and successful space missions. Although the importance of applying lessons learned to reduce risk is frequently stressed, there is little material available to help technical and management personnel research and document lessons learned. Collecting, researching, identifying, and documenting lessons learned that will be useful to current and future management and engineering personnel is not always a straightforward task. This white paper presents lessons learned and best practices concerning the research and documentation of technical and organizational lessons learned. It is intended to enable organizations to initiate or improve lessons learned research and documentation efforts. The content of this white paper is based on four technical lessons learned projects conducted by the United Space Alliance (USA) Flight Design and Dynamics Department, in support of the NASA/Johnson Space Center (JSC) Flight Design and Dynamics Division. Each project published a report, titled as follows: (1) GPS Lessons Learned From the ISS, Space Shuttle and X-38; (2) Lessons Learned From Seven Space Shuttle Missions; (3) Space Shuttle Rendezvous and Proximity Operations Experience Report; and (4) Navigation Technical History with Lessons Learned. The four projects were different in availability of subject matter experts and primary source material, subject scope, and the level of effort required to produce the final report. However, generic lessons can be drawn from all of them. The best practices will be discussed by the phases of report research and development: (1) Defining Report Requirements, Project Organization, and Schedule; (2) Collection and Analysis of Source Material; (3) Writing and Integrating the Report; and (4) Review and Revision of the Report.

Goodman, John L.↗

Gravity Modeling Effects on Surface-Interacting Vehicles in Supersonic Flight

A vehicle simulation is "surface-interacting" if the state of the vehicle (position, velocity, and acceleration) relative to the surface is important. Surface-interacting simulations per-form ascent, entry, descent, landing, surface travel, or atmospheric flight. The dynamics of surface-interacting simulations are influenced by the modeling of gravity. Gravity is the sum of gravitation and the centrifugal acceleration due to the world s rotation. Both components are functions of position relative to the world s center and that position for a given set of geodetic coordinates (latitude, longitude, and altitude) depends on the world model (world shape and dynamics). Thus, gravity fidelity depends on the fidelities of the gravitation model and the world model and on the interaction of these two models. A surface-interacting simulation cannot treat gravitation separately from the world model. This paper examines the actual performance of different pairs of world and gravitation models (or direct gravity models) on the travel of a supersonic aircraft in level flight under various start-ing conditions.

Madden, Michael M.↗

Further Investigations of Gravity Modeling on Surface-Interacting Vehicle Simulations

A vehicle simulation is "surface-interacting" if the state of the vehicle (position, velocity, and acceleration) relative to the surface is important. Surface-interacting simulations perform ascent, entry, descent, landing, surface travel, or atmospheric flight. The dynamics of surface-interacting simulations are influenced by the modeling of gravity. Gravity is the sum of gravitation and the centrifugal acceleration due to the world s rotation. Both components are functions of position relative to the world s center and that position for a given set of geodetic coordinates (latitude, longitude, and altitude) depends on the world model (world shape and dynamics). Thus, gravity fidelity depends on the fidelities of the gravitation model and the world model and on the interaction of the gravitation and world model. A surface-interacting simulation cannot treat the gravitation separately from the world model. This paper examines the actual performance of different pairs of world and gravitation models (or direct gravity models) on the travel of a subsonic civil transport in level flight under various starting conditions.

Madden, Michael M.↗