SEARCH · Engineering Papers

Results for “Fast charge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Nucleation mechanism of multiple-order parameter ferroelectric domain wall motion in hafnia

Ferroelectric hafnia exhibits promising robust polarization and silicon compatibility for ferroelectric devices. Unfortunately, it suffers from difficult polarization switching. Methods to enable easier polarization switching are needed, and the underlying reason for this switching difficulty is not understood. Here, we investigated the 180° domain walls of hafnia and their motion through nucleation. We found that the domains of multiple-order parameter hafnia possess complicated three-dimensional dipole patterns and lead to domain walls of different symmetry. The most common domain wall type is a complex domain wall involving reversal of both polarization and tetragonality order parameters. This domain wall symmetry ensures a good matching of the dipoles perpendicular to the domain wall, which leads to low domain wall energy. However, this ensures a sharp, high-energy, charged domain wall on the edges of nuclei that results in difficult nucleation. Thus, this domain wall is too stable to move, which explains the switching difficulty of hafnia. By contrast, another simple domain wall, involving only polarization reversal, has a poor matching of dipoles perpendicular to the domain wall. This leads to higher domain wall energy and ensures a diffusive and low-energy charged domain wall that enables easier nucleation. This simple domain wall is thus not too stable and easier to move. Our theory advances domain wall nucleation theory from the field of conventional single-order parameter to multiple-order parameters. We propose controlling the populations of different domain wall types in hafnia as a way to enable fast polarization switching and lower coercive fields.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Lone Pairs of Carbogenic Center Enable Thermally Activated Delayed Fluorescence from Carbon to Ligand Charge Transfer Excited States

Carbogenic compounds of the type L→C(0)←L, where L represents various ligands such as phosphines or carbenes, and C(0) denotes zerovalent carbon with two orthogonal lone pairs, are widely utilized in organic and coordination chemistry; however, in-depth photophysical and optical properties remain largely unknown. In the following work, we report detailed luminescent properties of one of the most prominent examples of carbogenic compounds, hexaphenylcarbodiphosphorane (CDP). Combined spectroscopic/TD-DFT studies demonstrate that both lone pairs of CDP participate in the observed visible light absorption and emission, which are associated with carbon lone pairs π*(PPh3) carbon to ligand charge transfer states (CLCTs). The CLCT exhibits a considerably decoupled electron-hole pair, resulting in a small S1-T1 gap and thermally assisted delayed fluorescence (TADF). Moreover, two lone pairs teamed up around C(0) provide numerous close-lying σ- and π-CLCT singlet and triplet states, which allow, for organic TADF emitters, extremely fast rates of exergonic intersystem crossing up to 1.27×109 s-1, competitive with some 3d and 4d metal-based TADF luminophores. These results open fresh directions for innovative design of novel luminescent materials for high-end photonic applications, utilizing lone pairs of carbogenic centers as donors of electron density in the excited states.

Mrózek, Ondřej [University of Southern California]↗

NASA NTRS2009

Direct-Solve Image-Based Wavefront Sensing

A method of wavefront sensing (more precisely characterized as a method of determining the deviation of a wavefront from a nominal figure) has been invented as an improved means of assessing the performance of an optical system as affected by such imperfections as misalignments, design errors, and fabrication errors. The method is implemented by software running on a single-processor computer that is connected, via a suitable interface, to the image sensor (typically, a charge-coupled device) in the system under test. The software collects a digitized single image from the image sensor. The image is displayed on a computer monitor. The software directly solves for the wavefront in a time interval of a fraction of a second. A picture of the wavefront is displayed. The solution process involves, among other things, fast Fourier transforms. It has been reported to the effect that some measure of the wavefront is decomposed into modes of the optical system under test, but it has not been reported whether this decomposition is postprocessing of the solution or part of the solution process.

Lyon, Richard G.↗

DOE OSTI2020

Generation of High-Charge Magnetized Electron Beams Consistent With JLEIC Electron Cooling Requirements

The proposed Jefferson Lab Electron-Ion Collider (JLEIC), currently under design, relies on electron cooling in order to achieve the desired luminosity. This includes an electron beam with >55 Mev, 3.2 nC bunches that cools hadron beams with energies up to 100 GeV. To enhance the cooling, the electron beam must be magnetized with a specific eigen-emittance partition. This paper explores the use of the Fermilab Accelerator Science and Technology (FAST) facility to demonstrate the generation of an electron beam with parameters consistent with those required in the JLEIC high-energy cooler. We demonstrate via simulations the generation of the required electron-beam parameters and perform a preliminary experiment to validate FAST capabilities to produce such beams.

43 PARTICLE ACCELERATORS↗

DOE OSTI2019

Influence of Electronic Polarization on the Spectral Density

Accurate spectral densities are necessary for computing realistic exciton dynamics and nonlinear optical spectra of chromophores in condensed-phase environments, including multichromophore pigment–protein systems. However, due to the significant computational cost of computing spectral densities from first principles, requiring many thousands of excited-state calculations, most simulations of realistic systems rely on treating the environment as fixed-point charges. In this work, using a number of representative systems ranging from solvated chromophores to the photoactive yellow protein (PYP), we demonstrate that the quantum mechanical (QM) electronic polarization of the environment is key to obtaining accurate spectral densities and line shapes within the cumulant framework. We show that the QM environment can enhance or depress the coupling of fast chromophore degrees of freedom to the energy gap, altering the electronic–vibrational coupling and the resulting vibronic progressions in the absorption spectrum. In analyzing the physical origin of peaks in the spectral density, we identify vibrational modes that couple the electron and the hole as being particularly sensitive to the QM screening of the environment. For PYP, we reveal the need for careful determination of the appropriate QM region to obtain reliable spectral densities. Our findings suggest that the QM polarization of the environment can be crucial not just for excitation energies but also for electronic–vibrational coupling in complex systems with implications for the correct modeling of linear and nonlinear optical spectroscopy in the condensed phase as well as energy transfer in pigment–protein complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Observation of an intermediate state during lithium intercalation of twisted bilayer MoS2

Abstract Lithium intercalation of MoS 2 is generally believed to introduce a phase transition from H phase (semiconducting) to T phase (metallic). However, during the intercalation process, a spatially sharp boundary is usually formed between the fully intercalated T phase MoS 2 and non-intercalated H phase MoS 2 . The intermediate state, i.e ., lightly intercalated H phase MoS 2 without a phase transition, is difficult to investigate by optical-microscope-based spectroscopy due to the narrow size. Here, we report the stabilization of the intermediate state across the whole flake of twisted bilayer MoS 2 . The twisted bilayer system allows the lithium to intercalate from the top surface and enables fast Li-ion diffusion by the reduced interlayer interaction. The E 2g Raman mode of the intermediate state shows a peak splitting behavior. Our simulation results indicate that the intermediate state is stabilized by lithium-induced symmetry breaking of the H phase MoS 2 . Our results provide an insight into the non-uniform intercalation during battery charging and discharging, and also open a new opportunity to modulate the properties of twisted 2D systems with guest species doping in the Moiré structures.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Commissioning of the LCLS-II Prototype HOM Detectors with Tesla-Type Cavities at Fast

Experiments at the Fermilab Accelerator Science and Technology* (FAST) facility detected electron beam-induced high order mode (HOM) signals from Tesla superconducting cavities. This paper describes some of the signal detection hardware used in this experiment, as well as measurements of the HOM signal magnitude versus beam trajectory. These measurements were made both with a single bunch and with a train of 50 bunches at bunch charges from 400 pC/b down to 10 pC/b. The detection hardware is designed for use with the Tesla superconducting cavities of LCLS-II at SLAC** and is based on a prototype already in use at Fermilab. The HOM signal passes through a bandpass filter that is centered on several cavity dipole modes and a zero bias Schottky diode detects its magnitude. Direct comparisons were made between the FNAL chassis and the SLAC prototype for identical beam steering conditions. To support measurements with bunch charges as low as 10 pC, the SLAC detector has RF amplification between the bandpass filter and the diode detector. With this hardware, usable HOM signal measurements are obtained with a single bunch of 10 pC in cryomodule cavities as will be needed for LCLS-II.

43 PARTICLE ACCELERATORS↗

NASA NTRS1978

ISEE-C solar wind plasma experiment

Two 135 deg spherical section electrostatic analyzers furnish electron and ion measurements of the solar wind on ISEE-C. Each of these instruments utilizes a divided secondary emitter system to intercept the analyzed particles. Secondary electrons selected from all of the emitters simultaneously provide fast two-dimensional measurements of the particle fluxes integrated over polar angle; at a slower rate secondary electrons are successively selected from individual emitters to provide three-dimensional measurements. Speed of the ion measurements is increased by a factor of two by using an active proton peak tracking system to reduce the total range of energy per charge which has to be covered.

Bame, S. J.↗

NASA NTRS1993

Vorticity equation for MHD fast waves in geospace environment

The MHD vorticity equation is modified in order to apply it to nonlinear MHD fast waves or shocks when their extent along the magnetic field is limited. Field-aligned current (FAC) generation is also discussed on the basis of this modified vorticity equation. When the wave normal is not aligned to the finite velocity convection and the source region is spatially limited, a longitudinal polarization causes a pair of plus and minus charges inside the compressional plane waves or shocks, generating a pair of FACs. This polarization is not related to the separation between the electrons and ions caused by their difference in mass, a separation which is inherent to compressional waves. The resultant double field-aligned current structure exists both with and without the contributions from curvature drift, which is questionable in terms of its contribution to vorticity change from the viewpoint of single-particle motion.

Yamauchi, M.↗

NASA NTRS2016

ACES M and S: Unmitigated Factorial Encounter Study on DAA/TCAS Interoperability

Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements for DAA alerting and guidance systems. This presentation contains the results of two combinatorial encounter analysis studies using NASA's SAA Control fast-time simulation capability for this purpose. In these studies, encounters between two aircraft were simulated one at a time for the full factorial combination of encounter geometries (e.g., encounter angle, CPA offset) and aircraft performance (e.g., ownership and intruder ground speeds and vertical rates). The first study analyzes the relationships (e.g., timeline) between the different alerting-safety regions in the SC-228 MOPS (in order of increasing severity): 1) DAA warning alert, 2) well clear recovery (WCR) guidance, 3) DAA-Collision Avoidance (CA), and 4) TCAS RA. This study will focus primarily on encounter situations in which TCAS RA occurs prior to any of the other alerting-safety boundaries. In particular, this study will investigate whether using vertical distance or vertical distance at closest point of approach (i.e., vertical miss distance or VMD) is more appropriate for the definition of the DAA-CA region. In addition, cases where transitions between different regions skip an intermediate region will be analyzed. The second study in this presentation explores a proposal to use an altitude rate error threshold to determine if vertical maneuvers are acceptable for DAA WCR guidance against non-cooperative intruders. This study incorporates the radar from the Honeywell sensor model and examines a series of pairwise encounters between a non-cooperative intruder and a UAS ownship, with different combinations of intruder states and ownship performance levels. The study uses SAA Control as a simulation platform and pilot model, and Omnibands to provide DWC recovery guidance. Two simulation sets, one that allows vertical DWC recovery guidance and one that does not, are compared to determine if encounters with altitude rate errors above 250 feet-per-minute are more likely to have more severe losses of well clear, as determined by the Loss of Well-Clear Severity metric.

SaaControl↗

NASA NTRSDate not supplied

A Parametric Battery Model for the Conceptual Design of Electric Aircraft

Electric aircraft conceptual designs usually have an assumed specific power and specific energy for the aircraft’s energy storage system that dictates the total capacity and the peak power available. The specific energy and power are inherently linked to the state-of-charge and discharge rate from which they were derived; therefore, they will not directly correspond to the diverse circumstances encountered in various aircraft missions and flight segments. These parameters turn the battery system into a black box, disregard potential electrical restrictions, and disallow the aircraft and battery to be optimized as a system. Peering into this box, this study highlights the importance of incorporating a parametric battery model into the conceptual design workflow by splitting high-level terms such as power into voltage and current and investigating their variability during the discharge process. Through the modeling of these more detailed parameters, this methodology shows the feasibility of using low states-of-charge for contingency operations, including the end of the reserve mission, expanding the amount of usable capacity for electric aircraft. Stark differences in aircraft capabilities can arise between varying fidelity battery models due to late-mission, high-power flight operations. This parametric battery model effectively captures these differences by evaluating the limitations that arise within the individual battery cells and the aircraft powertrain. This paper shows that the unusable charge of a battery is set by the balked landing power requirement and can realistically range from 5% to 44% based on assumptions. This sets the analog to unusable fuel capacity in aircraft with liquid fuel systems. Needing only aircraft- and mission-level inputs and only seconds of run time, this model is a prime fit for the fast, accurate exploration of the electric aircraft conceptual design space.

Battery↗

DOE OSTI2022

A Nonaqueous Redox‐Matched Flow Battery with Charge Storage in Insoluble Polymer Beads**

Abstract We describe the nonaqueous redox‐matched flow battery (RMFB), where charge is stored on redox‐active moieties covalently tethered to non‐circulating, insoluble polymer beads and charge is transferred between the electrodes and the beads via soluble mediators with redox potentials matched to the active moieties on the beads. The RMFB reported herein uses ferrocene and viologen derivatives bound to crosslinked polystyrene beads. Charge storage in the beads leads to a high (approximately 1.0–1.7 M) effective concentration of active material in the reservoirs while preventing crossover of that material. The relatively low concentration of soluble mediators (15 mM) eliminates the need for high‐solubility molecules to create high energy density batteries. Nernstian redox exchange between the beads and redox‐matched mediators was fast relative to the cycle time of the RMFB. This approach is generalizable to many different redox‐active moieties via attachment to the versatile Merrifield resin.

25 ENERGY STORAGE↗

DOE OSTI2024

A meshless stochastic method for Poisson–Nernst–Planck equations

A plethora of biological, physical, and chemical phenomena involve transport of charged particles (ions). Its continuum-scale description relies on the Poisson–Nernst–Planck (PNP) system, which encapsulates the conservation of mass and charge. The numerical solution of these coupled partial differential equations is challenging and suffers from both the curse of dimensionality and difficulty in efficiently parallelizing. We present a novel particle-based framework to solve the full PNP system by simulating a drift–diffusion process with time- and space-varying drift. We leverage Green’s functions, kernel-independent fast multipole methods, and kernel density estimation to solve the PNP system in a meshless manner, capable of handling discontinuous initial states. The method is embarrassingly parallel, and the computational cost scales linearly with the number of particles and dimension. We use a series of numerical experiments to demonstrate both the method’s convergence with respect to the number of particles and computational cost vis-à-vis a traditional partial differential equation solver.

Chemistry↗

NASA NTRS2000

The Observational Consequences of Proton-Generated Waves at Shocks

In the largest solar energetic particle (SEP) events, acceleration takes place at shock waves driven out from the Sun by fast coronal mass ejections. Protons streaming away from strong shocks generate Alfven waves that trap particles in the acceleration region, limiting outflowing intensities but increasing the efficiency of acceleration to higher energies. Early in the events, with the shock still near the Sun, intensities at 1 AU are bounded and spectra are flattened at low energies. Elements with different charge-to-mass ratios, Q/A, differentially probe the wave spectra near shocks, producing abundance ratios that vary in space and time. An initial rise in He/H, while Fe/O declines, is a typical symptom of the non-Kolmogorov wave spectra in the largest events. Strong wave generation can cause cross-field scattering near the shock and unusually rapid reduction in anisotropies even far from the shock. At the highest energies, shock spectra steepen to form a "knee." For protons, this spectral knee can vary from approx. 10 MeV to approx. 1 GeV depending on shock conditions for wave growth. In one case, the location of the knee scales approximately as Q/A in the energy/nucleon spectra of other species.

Reames, Donald V.↗

DOE OSTI2023

Engineering Functionalized 2D Metal-Organic Frameworks Nanosheets with Fast Li + Conduction for Advanced Solid Li Batteries

Solid-state batteries can ensure high energy density and safety in lithium metal batteries, while polymer electrolytes are plagued by slow ion kinetics and low selective transport of Li + . Metal-organic frameworks (MOFs) are proposed as emerging fillers for solid-state poly(ethylene oxide)(PEO) electrolytes, however, developing functionalized MOFs and understanding their roles on ion transfer has proven challenging. Herein, combining computational and experimental results, the functional group regulation in MOFs can effectively change surficial charge distribution and limit anion movement is revealed, providing a potential solution to these issues. Specifically, functionalized 2D MOF sheets are designed through molecular engineering to construct high-performance composite electrolytes, where the electron-donating effect of substituents in 2D-MOFs effectively limits the movement of ClO 4 - and promotes mechanical properties and ion migration numbers (0.36 up to 0.64) of PEO. As a result, Li/Li cells with composite electrolyte exhibit superior cyclability for 1000 h at a current density of 0.2 mA cm -2 . Meanwhile, the solid LiFePO 4 /Li battery delivers highly reversible capacities of 148.8 mAh g -1 after 200 cycles. In conclusion, these findings highlight a new approach for anion confinement through the use of functional group electronic effects, leading to enhanced ionic conductivity, and a feasible direction for high-performance solid-state batteries.

25 ENERGY STORAGE↗

DOE OSTI2023

Design and additive manufacturing of optimized electrodes for energy storage applications

Supercapacitors exhibit fast charging/discharging ability and have attracted considerable attention within the automotive, aerospace, and telecommunication industries. Porous carbons, prized for their high electrical conductivity and high surface area, have been attractive candidates for supercapacitor electrodes. Moving to thick electrodes is one strategy to further increase energy density due to a higher volume fraction of active material. However, thick electrodes suffer from sluggish charged species transport, which is why thin electrodes are currently favored. In this work, we investigate the use of computational optimization and additive manufacturing to design and fabricate thick porous electrodes with improved performance. Electrode performance was maximized by designing their morphologies via topology optimization and printing by projection micro stereolithography (PμSL) using commercial resin (PR48). The PR48 resin was then pyrolyzed (PR48-P) to create the final conductive electrode. The optimized PR48-P electrodes exhibited 99% improvement in capacitance compared to control electrodes printed with cubic lattice morphologies. To further improve performance, we formulated a resin combining graphene oxide (GO) and trimethylolpropane triacrylate (TMPTA). Electrodes printed with 3 wt% GO in TMPTA exhibited improved capacitance retention after pyrolysis compared to the PR48-P electrodes. Finally, this work demonstrates the benefits of using topology optimization to design electrodes and material development to improve functional properties of 3D printable electrodes.

25 ENERGY STORAGE↗

DOE OSTI2025

Enabling the Acquisition of Electron Beam-Induced Current (EBIC) Images in Conventional SEM and STEM Instruments

Electron beam-induced current (EBIC) imaging is a well-established scanning electron microscope (SEM) technique used to analyze the behavior of microelectronic devices including solar cells. Recently, the application of EBIC imaging in an aberration-corrected scanning transmission electron microscope (STEM) has been demonstrated and offers great potential for the in situ study of electronic materials, correlating charge transport properties to atomic structural and elemental information. Here, this work presents two ways to implement EBIC imaging in conventional SEM and STEM systems: one relying on the instrument's inherent scanning and imaging electronics and the other involving third-party systems usually available in electron microscopes. The implementation of lock-in EBIC in systems equipped with a fast beam blanker is also described. In addition, this work shows and discusses the different mechanisms at play in EBIC imaging and their dependence on beam energy, sample impedance, and electrical measurement configuration, providing researchers with the basic information needed to apply the technique to their research.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS2014

GCR Environmental Models III: GCR Model Validation and Propagated Uncertainties in Effective Dose

This is the last of three papers focused on quantifying the uncertainty associated with galactic cosmic rays (GCR) models used for space radiation shielding applications. In the first paper, it was found that GCR ions with Z>2 and boundary energy below 500 MeV/nucleon induce less than 5% of the total effective dose behind shielding. This is an important finding since GCR model development and validation have been heavily biased toward Advanced Composition Explorer/Cosmic Ray Isotope Spectrometer measurements below 500 MeV/nucleon. Weights were also developed that quantify the relative contribution of defined GCR energy and charge groups to effective dose behind shielding. In the second paper, it was shown that these weights could be used to efficiently propagate GCR model uncertainties into effective dose behind shielding. In this work, uncertainties are quantified for a few commonly used GCR models. A validation metric is developed that accounts for measurements uncertainty, and the metric is coupled to the fast uncertainty propagation method. For this work, the Badhwar-O'Neill (BON) 2010 and 2011 and the Matthia GCR models are compared to an extensive measurement database. It is shown that BON2011 systematically overestimates heavy ion fluxes in the range 0.5-4 GeV/nucleon. The BON2010 and BON2011 also show moderate and large errors in reproducing past solar activity near the 2000 solar maximum and 2010 solar minimum. It is found that all three models induce relative errors in effective dose in the interval [-20%, 20%] at a 68% confidence level. The BON2010 and Matthia models are found to have similar overall uncertainty estimates and are preferred for space radiation shielding applications.

Slaba, Tony C.↗