Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FUSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

View factor estimation of hot spot velocities in inertial confinement fusion implosions at the National Ignition Facility

nertial confinement fusion (ICF) experiments at the National Ignition Facility (NIF) suffer from asymmetries in thex-ray drive that degrade capsule performance compared to expectations for a symmetric one-dimensional implosion.Mode 1, or pole-to-pole, drive asymmetry can reduce confinement and implosion efficiency, driving a bulk motion ofthe hot spot that is detectable with neutron diagnostics. Understanding and removing sources of mode 1 asymmetry inICF implosions is important for improving performance, and the three-dimensional nature of the problem makes high-resolution radiation-hydrodynamic modeling extremely computationally expensive. This work describes a reducedorder view factor model that calculates the drive asymmetry induced by beam-to-beam variations in laser delivery andhohlraum diagnostic windows along the equator. Capsule response is estimated by coupling to a Green’s function thatrelates final hot spot velocity to the applied time-varying mode 1 asymmetry. The model makes several predictionsabout the impact of mode 1 drivers such as laser delivery and target misalignment, and achieves good agreementin both magnitude and vector direction for several shots in three families of high-performance platforms. However,notable discrepancies suggest other potential sources of mode 1 asymmetry not captured by the model are also at play

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Fill tube dynamics in inertial confinement fusion implosions with high density carbon ablators

Plasma jets, such as γ-ray burst jets, Herbig–Haro jets, μ-quasar jets, and active galactic nuclei jets, are found throughout the universe [S. Mendoza et al., Rev. Mex. Astron. Astrofis. 41, 453 (2005)]. Plasma jets are also present in indirect drive inertial confinement fusion experiments originating from the capsule's fill tube and occasionally from divots and voids in the capsules, particles on the exterior of the capsule, or from the tent holding the capsule in the target. This paper looks at two different gas-filled capsule implosions containing a plasma jet resulting from a capsule fill tube and fill channel, both of which utilized high density carbon ablators. Two models were developed, a drag and a snowplow model, which use the time-dependent motion of the injected mass through the hotspot to estimate the mass injected into the hotspot from the fill tube and channel, arriving at an average injected mass of ~84.5 ± 25.5 ng for the first experiment and 91 ± 20 ng for the second experiment. Furthermore, unlike previous methods to estimate fill tube injected mass, these techniques do not assume that the mixed mass is in thermal equilibrium with the hotspot or that the x-ray emission is only coming from within the hotspot itself. This paper also discusses the features seen in these experiments which include limb brightening in the shell for undoped ablators and flattening in the ablator from shadowing by the fill tube.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Characterizing laser preheat for laser-driven magnetized liner inertial fusion using soft x-ray emission

Laser heating of a gas in a cylindrical liner held in by a thin foil window is a critical process in the MagLIF (magnetized liner inertial fusion) concept. Window burn-through and gas heating for OMEGA scale MagLIF cylinders as a function of time have been determined using spectrally integrated soft x-ray diagnostics. Window laser absorption is classified in terms of the emitted x-rays from the window plasma as a function of laser energy, and shows that laser energy absorbed is weakly dependent on incident intensity. Radiation-hydrodynamic simulations overestimate the amount of laser energy absorbed by the window as evidenced by the increase in x-ray radiation across several photon energy bands compared to experiments. Gas temperatures inferred from soft x-ray emission from the front 1 mm of the liner are shown to evolve in time in a similar manner to simulation predictions. In conclusion, soft x-ray emission from the gas within the region of the liner that is normally imploded is shown to meet the 100 eV requirements set by the initial point design for laser-driven MagLIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Transient magnetic field diffusion considerations relevant to magnetically assisted indirect drive inertial confinement fusion

We report application of a magnetic field to an indirect drive inertial confinement fusion target requires diffusion of the field through the high-Z and electrically conducting Hohlraum. The onset of the external field generates eddy currents in the Hohlraum wall that result in (1) a reduction of the peak field at the capsule, (2) heating of the Hohlraum wall through Ohmic dissipation, and (3) wall movement due to the inward force from the eddy current interacting with the field. Heating of the wall causes an increase in blackbody radiation which can preheat the capsule and frozen deuterium–tritium fuel, while wall motion leads to potential misalignment of the lasers at the Hohlraum wall. Limiting these detrimental effects sets requirements on the tolerable magnitude of each effect. We present a nonlinear model for B-field diffusion through an infinitely long thin-walled cylinder with a temperature dependent resistivity, to show that a 15 μm thick wall of pure gold fails to meet these requirements. A new Hohlraum material made from an alloy of Au and Ta has a measured resistivity of ≥60 times that of Au and is shown with the nonlinear model to meet the requirements for magnetization. We compare the nonlinear model to simulations of the actual Hohlraum target using a finite element code which includes temperature-dependent Hohlraum resistivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Magnetic field effects on laser energy deposition and filamentation in magneto-inertial fusion relevant plasmas

We report on experimental measurements of how an externally imposed magnetic field affects plasma heating by kJ-class, nanosecond laser pulses. The experiments reported here took place in gas cells analogous to magnetized liner inertial fusion targets. We observed significant changes in laser propagation and energy deposition scale lengths when a 12T external magnetic field was imposed in the gas cell. We find evidence that the axial magnetic field reduces radial electron thermal transport, narrows the width of the heated plasma, and increases the axial plasma length. Reduced thermal conductivity increases radial thermal gradients. This enhances radial hydrodynamic expansion and subsequent thermal self-focusing. Our experiments and supporting 3D simulations in helium demonstrate that magnetization leads to higher thermal gradients, higher peak temperatures, more rapid blast wave development, and beam focusing with an applied field of 12T.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Cognitive simulation models for inertial confinement fusion: Combining simulation and experimental data

The design space for inertial confinement fusion (ICF) experiments is vast, and experiments are extremely expensive. Researchers rely heavily on computer simulations to explore the design space in search of high-performing implosions. However, ICF multiphysics codes must make simplifying assumptions, and thus deviate from experimental measurements for complex implosions. For more effective design and investigation, simulations require input from past experimental data to better predict future performance. In this work, we describe a cognitive simulation method for combining simulation and experimental data into a common, predictive model. This method leverages a machine learning technique called “transfer learning,” the process of taking a model trained to solve one task, and partially retraining it on a sparse dataset to solve a different, but related task. In the context of ICF design, neural network models are trained on large simulation databases and partially retrained on experimental data, producing models that are far more accurate than simulations alone. Here, we demonstrate improved model performance for a range of ICF experiments at the National Ignition Facility and predict the outcome of recent experiments with less than 10% error for several key observables. We discuss how the methods might be used to carry out a data-driven experimental campaign to optimize performance, illustrating the key product—models that become increasingly accurate as data are acquired.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Entropy generation from hydrodynamic mixing in inertial confinement fusion indirect-drive targets

The increase in entropy from the physical mixing of two adjacent materials in inertial confinement fusion (ICF) implosions and gas-filled hohlraums is analytically assessed. An idealized model of entropy generation from the mixing of identical ideal-gas particles across a material interface in the presence of pressure and temperature gradients is applied. Physically, mix-driven entropy generation refers to the work done by the gases in expanding into a larger common volume from atomic mixing under the condition of no internal energy change, or work needed to restore the initial unmixed state. Furthermore, the effect of a mix-generated entropy increase is analytically shown to lead to less compression of the composite ICF fluid under adiabatic conditions. The amount of entropy generation is estimated to be ~10 J for a Rayleigh–Taylor-induced micrometer-scale annular mixing layer between the solid deuterium–tritium fuel and (undoped) high-density carbon pusher of an imploding capsule at the National Ignition Facility (NIF). This level of entropy generation is consistent with lower-than-expected fuel compressions measured on the NIF [Hurricane et al., Phys. Plasmas 26, 052704 (2019)]. The degree of entropy increase from mixing of high-Z hohlraum wall material and low-Z, moderate- to high-density gas fills is estimated to lead to ~100 kJ of heat generation for NIF-scale experiments [Moody et al., Phys. Plasmas 21, 056317 (2014)]. This value represents a significant fraction of the inferred missing x-ray drive energy based on observed delays in capsule implosion times compared with mainline simulations [Jones et al., Phys. Plasmas 19, 056315 (2012)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Experimental characterization of hot-electron emission and shock dynamics in the context of the shock ignition approach to inertial confinement fusion

We report on planar target experiments conducted on the OMEGA-EP laser facility performed in the context of the shock ignition (SI) approach to inertial confinement fusion. The experiment aimed at characterizing the propagation of strong shock in matter and the generation of hot electrons (HEs), with laser parameters relevant to SI (1-ns UV laser beams with I ~10 16 W/cm 2 ). Time-resolved radiographs of the propagating shock front were performed in order to study the hydrodynamic evolution. The hot-electron source was characterized in terms of Maxwellian temperature, T h , and laser to hot-electron energy conversion efficiency η using data from different x-ray spectrometers. The post-processing of these data gives a range of the possible values for T h and η [i.e., T h [keV] ϵ (20, 50) and η ϵ (2%, 13%)]. These values are used as input in hydrodynamic simulations to reproduce the results obtained in radiographs, thus constraining the range for the HE measurements. According to this procedure, we found that the laser converts ~10% ± 4% of energy into hot electrons with T h = 27 ± 8 keV. The paper shows how the coupling of different diagnostics and numerical tools is required to sufficiently constrain the problem, solving the large ambiguity coming from the post-processing of spectrometers data. The effect of the hot electrons on the shock dynamics is then discussed, showing an increase in the pressure around the shock front. Furthermore, the low temperature found in this experiment without pre-compression laser pulses could be advantageous for the SI scheme, but the high conversion efficiency may lead to an increase in the shell adiabat, with detrimental effects on the implosion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

High yields in direct-drive inertial confinement fusion using thin-ice DT liner targets

In this work, we report simulation results that suggest record neutron yields above 3 x 10 14 can be achieved in laser-driven fusion on OMEGA by imploding large-outer-diameter targets (~1010μm) containing ice layers as thin as 34μm. Historically, the performance of thin and fast capsules is thought to be highly degraded by hydrodynamic instabilities. We present pulse designs that push implosion velocities above 650 km/s while maintaining enough ablative stabilization and low enough in-flight aspect ratios to survive the acceleration phase. We show these targets also possess improved stability during deceleration stemming from augmented core temperatures and low fuel convergence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Effect of laser preheat in magnetized liner inertial fusion at OMEGA

Integrated magnetized liner inertial fusion (MagLIF) experiments on the OMEGA laser system are modeled to investigate the effects of laser preheat on implosion performance. In both simulations and experiments, preheating the fuel with a laser enhances the neutron yield, with the maximum yield occurring at an optimal preheat laser energy. Increasing the preheat energy past the optimal value reduces the neutron yield. In simulations, the rate of the drop in neutron yield depends on the inclusion of the Nernst effect. The Nernst effect advects the magnetic field away from the center of the fuel region during the preheat stage of MagLIF on OMEGA and weakens magnetic-flux compression. If the Nernst effect is not included, the simulated drop in yield past the optimal preheat laser energy is more gradual as opposed to the sharper drop seen in experiments. Simulations are able to model trend in measured ion temperatures seen in experiments. Here, a mix model is used to show that including mix from the wall in the simulated fuel region further degrades the yield and lowers the optimal preheat laser energy. Simulations with mix predict that increasing the initial axial magnetic field may still enhance yield performance in integrated implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Analysis of limited coverage effects on areal density measurements in inertial confinement fusion implosions

Accurate diagnosis of areal density ($\textit{ρR}$) is critical for the inference of performance metrics in inertial confinement fusion implosions. One potential source of error in this diagnosis is the existence of low mode perturbations in the imploding target, which lead to asymmetries in the inference of the $\textit{ρR}$ from different lines of sight. Here, the error accrued as a result of limited coverage of the sphere due to a finite number of detectors is quantified, and the development of a forward scatter measurement from the OMEGA neutron time-of-flight detectors is motivated. In this work, a method by which the 1D-equivalent 4 π-averaged $\langleρR\rangle$ can be reconstructed, if accurate mode information can be diagnosed by other means, is validated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Instability seeding mechanisms due to internal defects in inertial confinement fusion targets

Performance degradation in laser-driven inertial confinement fusion (ICF) implosions is caused by several effects, one of which is Rayleigh–Taylor instability growth. Defects in ICF targets, such as internal voids and surface roughness, create instability seeds in the shell as shocks propagate through the target. A comprehensive understanding of seeding mechanisms is essential to characterize the impact of target defects on inflight shell integrity and mass injection into the central, lower-density vapor region. An analysis of early-time behavior of both single-mode shell mass modulations and isolated voids is performed by examining the evolution of the acoustic waves launched by these target imperfections. A systematic study of localized perturbation growth as a function of defect placement and size is presented. Furthermore, the use of low-density ablator materials (such as foams) is suggested as a potential mitigation strategy to improve target robustness against the impact of defect-initiated growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Transfer learning driven design optimization for inertial confinement fusion

Transfer learning is a promising approach to create predictive models that incorporate simulation and experimental data into a common framework. In this technique, a neural network is first trained on a large database of simulations and then partially retrained on sparse sets of experimental data to adjust predictions to be more consistent with reality. Previously, this technique has been used to create predictive models of Omega [Humbird et al., IEEE Trans. Plasma Sci. 48, 61–70 (2019)] and NIF [Humbird et al., Phys. Plasmas 28, 042709 (2021); Kustowski et al., Mach. Learn. 3, 015035 (2022)] inertial confinement fusion (ICF) experiments that are more accurate than simulations alone. Here, in this work, we conduct a transfer learning driven hypothetical ICF campaign in which the goal is to maximize experimental neutron yield via Bayesian optimization. The transfer learning model achieves yields within 5% of the maximum achievable yield in a modest-sized design space in fewer than 20 experiments. Furthermore, we demonstrate that this method is more efficient at optimizing designs than traditional model calibration techniques commonly employed in ICF design. Such an approach to ICF design could enable robust optimization of experimental performance under uncertainty.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Modeling of a spatially resolved ion temperature diagnostic for inertial confinement fusion

Here, the performance of modern laser-driven inertial confinement fusion (ICF) experiments is degraded by contamination of the deuterium–tritium (DT) fuel with high-Z material during compression. Simulations suggest that this mix can be described by the ion temperature distribution of the implosion, given that such contaminants deviate in temperature from the surrounding DT plasma. However, existing neutron time-of-flight (nTOF) diagnostics only measure the spatially integrated ion temperature. This paper describes the techniques and forward modeling used to develop a novel diagnostic imaging system to measure the spatially resolved ion temperature of an ICF implosion for the first time. The technique combines methods in neutron imaging and nTOF diagnostics to measure the ion temperature along one spatial dimension at yields currently achievable on the OMEGA laser. A detailed forward model of the source and imaging system was developed to guide instrument design. The model leverages neutron imaging reconstruction algorithms, radiation hydrodynamics and Monte Carlo simulations, optical ray tracing, and more. The results of the forward model agree with the data collected on OMEGA using the completed diagnostic. The analysis of the experimental data is still ongoing and will be discussed in a separate publication.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

The importance of laser wavelength for driving inertial confinement fusion targets. I. Basic physics

We reinvestigate the role that laser wavelength plays in driving inertial confinement fusion (ICF) targets. Different assumptions underlie previous analytic frameworks that provide predictions for wavelength scaling of many important target parameters. These are explored and compared to radiation-hydrodynamics simulations of laser-driven targets. We are particularly interested here in lasers with wavelengths between 0.193 μm [wavelength of the Argon Flouride (ArF) excimer laser] and 0.527 μm (the frequency-doubled glass Nd:glass laser). Short-wavelength drivers have significant advantages for directly driven ICF targets, which are summarized here. We show that constraints such as providing a certain pressure or avoiding laser-plasma instability thresholds allow shorter laser wavelengths to provide energy savings, pressure enhancements, and/or higher hydrodynamic efficiencies. We also consider potential disadvantages, such as increased laser imprint or exposure to the Landau–Darrieus instability. These are shown to be either minor and/or can be easily remediated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

The importance of laser wavelength for driving inertial confinement fusion targets. II. Target design

We describe details of radiation-hydrodynamics simulations of directly driven targets for inertial confinement fusion using laser drivers with different laser wavelengths. Of particular interest here are comparisons of frequency-tripled glass (laser wavelength 351 nm) lasers with the argon fluoride (193 nm) and krypton fluoride (248 nm) excimer lasers and the effects that these laser wavelengths have on the target designs. We explore the effect these drivers have on the compromise involved between lowering laser plasma instabilities (LPIs) or hydrodynamic instabilities while providing high gains and seek to quantify this trade-off. Short-wavelength drivers have significant advantages, primarily in using less power and energy to drive targets. Additionally, they expand the allowed operating regime that is constrained by LPI avoidance and the production of higher pressures needed for more hydrodynamically stable targets. Potential disadvantages to shorter drive wavelengths, such as increased imprint, are examined and found to be unimportant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Invited article: X-ray phase contrast imaging in inertial confinement fusion and high energy density research

X-ray phase contrast imaging (XPCI) provides enhanced image contrast beyond absorption-based x-ray imaging alone due to refraction and diffraction from gradients in the object material density. It is sensitive to small variations in density, such as internal voids, cracks, grains, defects, and material flow, as well as to stronger density variations such as from a shock wave. Beyond its initial use in biology and materials science, XPCI is now routinely used in inertial confinement fusion (ICF) and high energy density (HED) research, first to characterize ICF capsules and targets, and later applied in dynamic experiments, where coherent x-ray sources, ultrafast x-ray pulses, and high temporal and spatial resolution are required. In this Review article, XPCI image formation theory is presented, its diverse use in ICF and HED research is discussed, the unique requirements for ultrafast XPCI imaging are given, as well as current challenges and issues in its use.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

The competing effects of wave amplitude and collisions on multi-ion species suppression of stimulated Brillouin scattering in inertial confinement fusion Hohlraums

Reduction in stimulated Brillouin scattering (SBS) from National Ignition Facility Hohlraums has been predicted through the use of multi-ion species materials on Hohlraum walls. This approach to controlling SBS is based upon introducing a lighter ion species to the heavier ion species Hohlraum wall in order to greatly increase the ion Landau damping of ion acoustic waves (IAWs). In a collisionless plasma, if the IAWs driven by SBS reach sufficient amplitudes, this increased damping is reduced or even eliminated by ion trapping in the IAWs. Here, the nonlinear behavior of IAWs is simulated with a multi-ion species Vlasov code, including interspecies ion–ion collisions, self-collisions, and electron–ion pitch-angle collisions. The effect of collisions on the trapping of ions and electrons in a large-amplitude IAW is studied in a regime of relevance to current Inertial Confinement Fusion experiments. Our simulations show that collisions can scatter trapped particles out of resonance with the IAW, suppressing trapping and helping to maintain an effective Landau damping of the IAW. The IAW amplitude required to trap particles in the presence of strong collisions is estimated analytically. These estimates are tested for strongly damped IAWs in tantalum oxide and pure helium plasmas. Here our simulations show that, above a threshold amplitude, the damping is reduced by an amount inversely proportional to the wave amplitude. Thus, the success of controlling SBS using a multispecies plasma may depend sensitively on laser power and pulse length.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗