Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Estimating GATE rainfall with geosynchronous satellite images

A method of estimating GATE rainfall from either visible or infrared images of geosynchronous satellites is described. Rain is estimated from cumulonimbus cloud area by the equation R = a sub 0 A + a sub 1 dA/dt, where R is volumetric rainfall, A cloud area, t time, and a sub 0 and a sub 1 are constants. Rainfall, calculated from 5.3 cm ship radar, and cloud area are measured from clouds in the tropical North Atlantic. The constants a sub 0 and a sub 1 are fit to these measurements by the least-squares method. Hourly estimates by the infrared version of this technique correlate well (correlation coefficient of 0.84) with rain totals derived from composited radar for an area of 100,000 sq km. The accuracy of this method is described and compared to that of another technique using geosynchronous satellite images. It is concluded that this technique provides useful estimates of tropical oceanic rainfall on a convective scale.

Stout, J. E.↗

Comparison of stability and control parameters for a light, single-engine, high-winged aircraft using different flight test and parameter estimation techniques

The longitudinal and lateral stability and control parameters for a high wing, general aviation, airplane are examined. Estimations using flight data obtained at various flight conditions within the normal range of the aircraft are presented. The estimations techniques, an output error technique (maximum likelihood) and an equation error technique (linear regression), are presented. The longitudinal static parameters are estimated from climbing, descending, and quasi steady state flight data. The lateral excitations involve a combination of rudder and ailerons. The sensitivity of the aircraft modes of motion to variations in the parameter estimates are discussed.

Suit, W. T.↗

Maximum likelihood estimation of label imperfections and its use in the identification of mislabeled patterns

The problem of estimating label imperfections and the use of the estimation in identifying mislabeled patterns is presented. Expressions for the maximum likelihood estimates of classification errors and a priori probabilities are derived from the classification of a set of labeled patterns. Expressions also are given for the asymptotic variances of probability of correct classification and proportions. Simple models are developed for imperfections in the labels and for classification errors and are used in the formulation of a maximum likelihood estimation scheme. Schemes are presented for the identification of mislabeled patterns in terms of threshold on the discriminant functions for both two-class and multiclass cases. Expressions are derived for the probability that the imperfect label identification scheme will result in a wrong decision and are used in computing thresholds. The results of practical applications of these techniques in the processing of remotely sensed multispectral data are presented.

Chittineni, C. B.↗

Estimating crop proportions from remotely sensed data

The classification/pixel-count method for estimating the proportion of wheat in each segment is theoretically biased even if all distributional assumptions are met. Alternative ways to estimate crop proportions are examined and their performance testing is considered. Topics covered include general linear functional estimates, the method of moments, and maximum likelihood estimators.

Feiveson, A. H.↗

Evaluation of Bayesian Sequential Proportion Estimation Using Analyst Labels

The author has identified the following significant results. A total of ten Large Area Crop Inventory Experiment Phase 3 blind sites and analyst-interpreter labels were used in a study to compare proportional estimates obtained by the Bayes sequential procedure with estimates obtained from simple random sampling and from Procedure 1. The analyst error rate using the Bayes technique was shown to be no greater than that for the simple random sampling. Also, the segment proportion estimates produced using this technique had smaller bias and mean squared errors than the estimates produced using either simple random sampling or Procedure 1.

Lennington, R. K.↗

The use of radar at non-attenuating wavelengths as a tool for the estimation of rain attenuation at frequencies above 10 GHz

The paper describes radar techniques and modeling procedures for estimating slant path attenuation and site diversity performance. The estimation results of an ongoing experiment at Wallops Island, Virginia are examined. At this location a high resolution S-band radar (0.4 deg beamwidth) monitors the reflectivity at contiguous pulse volumes approximately colocated with an earth space-path along which the Comstar beacon signal at 28.56 GHz is received. Radar estimated levels of rain attenuation at 28.56 GHz are compared with directly measured values both on a case by case basis as well as statistically for summer and winter periods. Use is made of ground disdrometer measurements in the radar estimation scheme.

Goldhirsh, J.↗

Landsat-based multiphase estimation of California's irrigated lands

Currently, inventory of California's irrigated lands is performed on a seven year cycle. Since 1975, the University of California in cooperation with NASA and the California Department of Water Resources has been developing and testing techniques to utilize a Landsat based remote sensing system to produce statewide estimates in a single year. The proposed system utilizes multiphase sampling, stratification and multitemporal Landsat imagery to produce the estimate. Early research concentrated on regional estimates to develop the techniques. This year, an inventory of the entire state of California is being performed. In addition, research on the utilization of digital analysis for estimating irrigated acreage and the determination of specific crop types (manual and digital analysis) is also underway.

Wall, S. L.↗

Simulation study of geometric shape factor approach to estimating earth emitted flux densities from wide field-of-view radiation measurements

A study was performed on the use of geometric shape factors to estimate earth-emitted flux densities from radiation measurements with wide field-of-view flat-plate radiometers on satellites. Sets of simulated irradiance measurements were computed for unrestricted and restricted field-of-view detectors. In these simulations, the earth radiation field was modeled using data from Nimbus 2 and 3. Geometric shape factors were derived and applied to these data to estimate flux densities on global and zonal scales. For measurements at a satellite altitude of 600 km, estimates of zonal flux density were in error 1.0 to 1.2%, and global flux density errors were less than 0.2%. Estimates with unrestricted field-of-view detectors were about the same for Lambertian and non-Lambertian radiation models, but were affected by satellite altitude. The opposite was found for the restricted field-of-view detectors.

Weaver, W. L.↗

Radar estimation of slant path rain attenuation at frequencies above 10 GHz and comparisons with measured multi-season results

Techniques and results pertaining to estimating Earth satellite path rain attenuation events and statistics using radar at nonattenuating wavelengths are presented. The radar formulation and beam scanning methods are described and the procedure for relating the radar measured Rayleigh reflectivity to the high frequency Mie attenuation coefficient are given. Examples of radar derived single terminal statistics and estimation criteria as they relate to path angle and frequency are reviewed. Radar derived space diversity statistics and their dependence on terminal spacing and frequency are described. Site diversity performance curves obtained by radar and radiometry are compared with each other demonstrating the utility of radar methods. Results of a multi-year experiment to test, refine, and establish accuracies of radar methods for arriving at estimates of rain attenuation along an Earth-satellite path are discussed. Comparisons of measured and radar estimated fade events are presented and found to be good. Comparisons of cumulative fade distributions show agreement to be excellent giving an rms deviation of 1 dB.

Goldhirsh, J.↗

The estimation of decay coefficient in pulsed transient data

The problem of estimation and interpretation of a decay coefficient in a pulsed transient signal is considered. Two methods are proposed in estimating the decay coefficient of pulsed decay transient data. The methods are derived through a spectral analysis for a parametric model of impulse response function of signal frequency. The several pulsed response data from T burner tests as well as some synthesized data are analyzed and the performance of the estimation procedures are examined. Suggestions for further research in this area are offered. The estimation procedures presented can be extended to the case of multiple frequencies in pulse response function and time dependent decay or growth coefficients.

Park, T. W.↗

Cross-bispectrum computation and variance estimation

A method for the estimation of cross-bispectra of discrete real time series is developed. The asymptotic variance properties of the bispectrum are reviewed, and a method for the direct estimation of bispectral variance is given. The symmetry properties are described which minimize the computations necessary to obtain a complete estimate of the cross-bispectrum in the right-half-plane. A procedure is given for computing the cross-bispectrum by subdividing the domain into rectangular averaging regions which help reduce the variance of the estimates and allow easy application of the symmetry relationships to minimize the computational effort. As an example of the procedure, the cross-bispectrum of a numerically generated, exponentially distributed time series is computed and compared with theory.

Lii, K. S.↗

Estimation of the propagation delay through the troposphere from microwave radiometer data

Microwave propagation delay through the troposphere is studied as a means of estimating the adverse effect of atmospheric water vapor on the accuracy of measurements made with very long baseline interferometry. Vertical profiles of temperature and water vapor density were obtained from a total of 240 radiosonde launches taken simultaneously at three New England locations in 1974; all studies were made at the 19 and 22.2 GHz frequency operating range of the radiometers. The wet path length in the zenith direction could be estimated from the surface water vapor density to an accuracy of 5 cm for the summer data and 2 cm for winter data, and with the brightness temperatures, it could be estimated to an accuracy of 0.3 cm. Two dual-frequency radiometers were also used to determine the accuracy of prediction of the path length from real radiometry data. The rms error for the estimation of wet path length from surface meteorological parameters was 3.2 cm, and for the radiometer brightness temperatures the rms error was 1.5 cm.

Moran, J. M.↗

Maximum likelihood estimation of label imperfection probabilities and its use in the identification of mislabeled patterns

Estimating label imperfections and the use of estimations in the identification of mislabeled patterns are discussed. Expressions are presented for the asymptotic variances of the probability of correct classification and proportion, and for the maximum likelihood estimates of classification errors and a priori probabilities. Models are developed for imperfections in the labels and classification errors, and expressions are derived for the probability of imperfect label identification schemes resulting in wrong decisions. The expressions are used in computing thresholds and the techniques are given practical applications. The imperfect label identification scheme in the multiclass case is found to amount to establishing a region around each decision surface, and decisions of the label correction scheme are found in close agreement with the analyst-interpreter interpretations of the imagery films. As an example, the application of the maximum likelihood estimation to the processing of Landsat MSS data is discussed.

Chittineni, C. B.↗

Sampling Landsat classifications for crop area estimation

An investigation was conducted to evaluate the effect of several sampling alternatives on the accuracy of crop area estimates made from classification of Landsat Multispectral Scanner (MSS) data. The specific objective was to assess the precision and the bias associated with alternative sampling schemes involving different numbers of several sampling unit sizes. The estimates achieved using the 5 by 6 nm segments were found to have the least precision of any sampling scheme tested. The estimates become more precise as the segment size decreases and more segments are taken. The precision of the 5 by 6 nm segments was significantly less than that of the pixel samples. None of the sampling schemes was significantly biased on the average, and none of the average estimates differed significantly from the population parameter. The maximum absolute deviation, however, was directly related to sampling unit size and should be considered in selection of a sampling unit.

Hixson, M. M.↗

Improved Estimates of Thermodynamic Parameters

Techniques refined for estimating heat of vaporization and other parameters from molecular structure. Using parabolic equation with three adjustable parameters, heat of vaporization can be used to estimate boiling point, and vice versa. Boiling points and vapor pressures for some nonpolar liquids were estimated by improved method and compared with previously reported values. Technique for estimating thermodynamic parameters should make it easier for engineers to choose among candidate heat-exchange fluids for thermochemical cycles.

Lawson, D. D.↗

Evaluation of a segment-based LANDSAT full-frame approach to corp area estimation

As the registration of LANDSAT full frames enters the realm of current technology, sampling methods should be examined which utilize other than the segment data used for LACIE. The effect of separating the functions of sampling for training and sampling for area estimation. The frame selected for analysis was acquired over north central Iowa on August 9, 1978. A stratification of he full-frame was defined. Training data came from segments within the frame. Two classification and estimation procedures were compared: statistics developed on one segment were used to classify that segment, and pooled statistics from the segments were used to classify a systematic sample of pixels. Comparisons to USDA/ESCS estimates illustrate that the full-frame sampling approach can provide accurate and precise area estimates.

Bauer, M. E.↗

Determination of the optimal level for combining area and yield estimates

Several levels of obtaining both area and yield estimates of corn and soybeans in Iowa were considered: county, refined strata, refined/split strata, crop reporting district, and state. Using the CCEA model form and smoothed weather data, regression coefficients at each level were derived to compute yield and its variance. Variances were also computed with stratum level. The variance of the yield estimates was largest at the state and smallest at the county level for both crops. The refined strata had somewhat larger variances than those associated with the refined/split strata and CRD. For production estimates, the difference in standard deviations among levels was not large for corn, but for soybeans the standard deviation at the state level was more than 50% greater than for the other levels. The refined strata had the smallest standard deviations. The county level was not considered in evaluation of production estimates due to lack of county area variances.

Bauer, M. E.↗

Estimation of distributed parameter systems

The estimation and control of large flexible space structures pose significant new control technology problems. One major problem area is the closed-loop stability of a structure that has been modeled with truncated modal dynamics. Stability problems arise due to the control design process beginning with a deficient model. This work provides the necessary conditions for the optimal estimation of infinite dimensional (partial-differential equation) systems. This approach can be particularly useful for initial control studies and for gaining considerable insight into what the optimal estimator for a truly infinite dimensional system should be. A detailed example of the estimation of the continuous shape of a string in tension is presented.

Schaechter, D. B.↗