Results for “Error estimation” — Page 62

NASA NTRS2017

FUN3D Manual: 13.2

This manual describes the installation and execution of FUN3D version 13.2, including optional dependent packages. FUN3D is a suite of computational fluid dynamics simulation and design tools that uses mixed-element unstructured grids in a large number of formats, including structured multiblock and overset grid systems. A discretely-exact adjoint solver enables efficient gradient-based design and grid adaptation to reduce estimated discretization error. FUN3D is available with and without a reacting, real-gas capability. This generic gas option is available only for those persons that qualify for its beta release status.

Biedron, Robert T.↗

NASA NTRS2018

FUN3D Manual: 13.3

This manual describes the installation and execution of FUN3D version 13.3, including optional dependent packages. FUN3D is a suite of computational fluid dynamics simulation and design tools that uses mixed-element unstructured grids in a large number of formats, including structured multiblock and overset grid systems. A discretely-exact adjoint solver enables efficient gradient-based design and grid adaptation to reduce estimated discretization error. FUN3D is available with and without a reacting, real-gas capability. This generic gas option is available only for those persons that qualify for its beta release status.

Biedron, Robert T.↗

NASA NTRS2018

Optimal Estimation-Based Algorithm to Retrieve Aerosol Optical Properties for GEMS Measurements Over Asia

The Geostationary Environment Monitoring Spectrometer (GEMS) is scheduled to be in orbit in 2019 onboard the GEO-KOMPSAT 2B satellite and will continuously monitor air quality over Asia. The GEMS will make measurements in the UV spectrum (300-500 nm) with 0.6 nm resolution. In this study, an algorithm is developed to retrieve aerosol optical properties from UV-visible measurements for the future satellite instrument and is tested using 3 years of existing OMI L1B data. This algorithm provides aerosol optical depth (AOD), single scattering albedo (SSA) and aerosol layer height (ALH) using an optimized estimation method. The retrieved AOD shows good correlation with Aerosol Robotic Network (AERONET) AOD with correlation coefficients of 0.83, 0.73 and 0.80 for heavy-absorbing fine (HAF) particles, dust and non-absorbing (NA) particles, respectively. However, regression tests indicate underestimation and overestimation of HAF and NA AOD, respectively. In comparison with AOD from the OMI/Aura Near-UV Aerosol Optical Depth and Single Scattering Albedo 1-orbit L2 Swath 13 km x 24 km V003 (OMAERUV) algorithm, the retrieved AOD has a correlation coefficient of 0.86 and linear regression equation, AOD(sub GEMS) = 1.18AOD(sub OMAERUV) + 0.09. An uncertainty test based on a reference method, which estimates retrieval error by applying the algorithm to simulated radiance data, revealed that assumptions in the spectral dependency of aerosol absorptivity in the UV cause significant errors in aerosol property retrieval, particularly the SSA retrieval. Consequently, retrieved SSAs did not show good correlation with AERONET values. The ALH results were qualitatively compared with the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) products and were found to be well correlated for highly absorbing aerosols. The difference between the attenuated-backscatter-weighted height from CALIOP and retrieved ALH were mostly closed to zero when the retrieved AOD is higher than 0.8 and SSA is lower than 0.93. Although retrieval accuracy was not significantly improved, the simultaneous consistent retrieval of AOD, SSA and ALH alone demonstrates the value of this stand-alone algorithm, given their nature for error using other methods. The use of these properties as input parameters for the air mass factor calculation is expected to improve the retrieval of other trace gases over Asia.

Geostationary Environment Monitoring Spectrometer ↗

NASA NTRS2016

Cyclotron Resonant Scattering Feature Simulations I. Thermally Averaged Cyclotron Scattering Cross Sections, Mean Free Photon-Path Tables, and Electron Momentum Sampling

Electron cyclotron resonant scattering features (CRSFs) are observed as absorption-like lines in the spectra of X-ray pulsars. A significant fraction of the computing time for Monte Carlo simulations of these quantum mechanical features is spent on the calculation of the mean free path for each individual photon before scattering, since it involves a complex numerical integration over the scattering cross section and the (thermal) velocity distribution of the scattering electrons. We aim to numerically calculate interpolation tables which can be used in CRSF simulations to sample the mean free path of the scattering photon and the momentum of the scattering electron. The tables also contain all the information required for sampling the scattering electron's final spin. The tables were calculated using an adaptive Simpson integration scheme. The energy and angle grids were refined until a prescribed accuracy is reached. The tables are used by our simulation code to produce artificial CRSF spectra. The electron momenta sampled during these simulations were analyzed and justified using theoretically determined boundaries. We present a complete set of tables suited for mean free path calculations of Monte Carlo simulations of the cyclotron scattering process for conditions expected in typical X-ray pulsar accretion columns (0.01 B/B(sub crit) is less than or equal to 0.12, where B(sub crit) = 4.413 x 1013 G, and 3 keV kBT 15 keV). The sampling of the tables is chosen such that the results have an estimated relative error of at most 1/15 for all points in the grid. The tables are available online (see link in footnote, page 1).

Schwarm, F.-W.↗

NASA NTRS2018

FUN3D Manual: 13.4

This manual describes the installation and execution of FUN3D version 13.4, including optional dependent packages. FUN3D is a suite of computational fluid dynamics simulation and design tools that uses mixed-element unstructured grids in a large number of formats, including structured multiblock and overset grid systems. A discretely-exact adjoint solver enables efficient gradient-based design and grid adaptation to reduce estimated discretization error. FUN3D is available with and without a reacting, real-gas capability. This generic gas option is available only for those persons that qualify for its beta release status.

Biedron, Robert T.↗

NASA NTRS2019

FUN3D Manual: 13.5

This manual describes the installation and execution of FUN3D (Fully-UNstructured three-dimensional CFD (Computational Fluid Dynamics) code) version 13.5, including optional dependent packages. FUN3D is a suite of computational fluid dynamics simulation and design tools that uses mixed-element unstructured grids in a large number of formats, including structured multiblock and overset grid systems. A discretely-exact adjoint solver enables efficient gradient-based design and grid adaptation to reduce estimated discretization error. FUN3D is available with and without a reacting, real-gas capability. This generic gas option is available only for those persons that qualify for its beta release status.

Biedron, Robert T.↗

NASA NTRS2019

FUN3D Manual: 13.6

This manual describes the installation and execution of FUN3D version 13.6, including optional dependent packages. FUN3D is a suite of computational fluid dynamics simulation and design tools that uses mixed-element unstructured grids in a large number of formats, including structured multiblock and overset grid systems. A discretely-exact adjoint solver enables efficient gradient-based design and grid adaptation to reduce estimated discretization error. FUN3D is available with and without a reacting, real-gas capability. This generic gas option is available only for those persons that qualify for its beta release status.

Robert T Biedron↗

NASA NTRS2020

Revisiting OSIRIS-REx Touch-And-Go (TAG) Performance Given the Realities of Asteroid Bennu

The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission is a NASA New Frontiers mission that launched in 2016 and rendezvoused with the near-Earth asteroid (101955) Bennu in late 2018. Upon arrival, the surface of Bennu was found to be much rockier than expected. The original Touch-and-Go (TAG) requirement for sample collection was to deliver the spacecraft to a site with a 25-meter radius; however, the largest hazard-free sites are no larger than 8 meters in radius. To accommodate the dearth of safe sample collection sites, the project reevaluated all aspects of flight system performance pertaining to TAG in order to account for the demonstrated performance of the spacecraft and navigation prediction accuracies. More-over, the project has base lined on board natural feature tracking instead of lidar for providing the on board navigation state update during the TAG sequence. This paper summarizes the improvements in error source estimation, enhancements in on board trajectory correction, and results of recent Monte Carlo simulation to en-able sample collection with the given constraints. TAG delivery and on board navigation performance are presented for the final four candidate TAG sites.

Berry, Kevin↗

NASA NTRSDate not supplied

AN INTRODUCTION TO THE GEONEX LEVEL-1G PRODUCTS: TOP-OF-ATMOSPHERE REFLECTANCE AND BRIGHTNESS TEMPERATURE

This paper introduces the GeoNEX (Geostationary-NASA Earth eXchange) Level-1G products of top-of-atmosphere (TOA) reflectance and brightness temperature. The products use data streams from the latest geostationary (GEO) sensors including the GOES-16/17 ABI and the Himawari-8/9 AHI. The GeoNEX processing pipeline starts by converting digital numbers to physical quantities with the latest radiometric calibration information. It integrates algorithms to automatically detect and remove residual geolocation errors, to estimate the pixel-wise data-acquisition time, and to accurately calculate the solar illumination angles for each pixel in the domain at every time step. The outputs are reprojected to a globally tiled common grid in geographic coordinates designed to facilitate inter-comparisons and/or synergies between the GeoNEX products and existing Earth observation datasets from polar-orbiting satellites. Therefore, the GeoNEX L1G products provide accurate and consistent TOA reflectance and brightness temperature datasets for scientific analyses and downstream product development.

Geostationary satellite, GOES-16, Himawari-8, NASA↗

NASA NTRSDate not supplied

Investigation of Aerodynamic Matching Sensitivities for Conceptual Design

A methodology for aerodynamic matching was implemented in the Higher fidelity Conceptual Design and structural optimization (HCDstruct) tool to support transonic flutter simulations. The Enhanced Factor Correction Technique was implemented in HCDstruct to correct the Nastran doublet lattice method using data from corresponding computational fluid dynamics simulations. In this paper, sensitivities associated with this aerodynamic matching technique were investigated using HCDstruct and a Boeing 737-200-like aircraft configuration. Specifically, sensitivities of the aerodynamic matching method were investigated with respect to changes in flight conditions, such as changes in Mach number and angle of attack, and also in key design variables for the main wing, such as changes in aspect ratio and sweep angle. The variations in flight conditions and design parameters were mapped to estimated prediction error in sectional lift for the main wing, which helps to demonstrate the extent to which a user may expect a given aerodynamic correction matrix to provide suitable aerodynamic predictions for a realistic aircraft wing.

Jesse R. Quinlan↗

NASA NTRSDate not supplied

Investigation of Aerodynamic Matching Sensitivities for Conceptual Design

A methodology for aerodynamic matching was implemented in the Higher fidelity Conceptual Design and structural optimization (HCDstruct) tool to support transonic flutter simulations. The Enhanced Factor Correction Technique was implemented in HCDstruct to correct the Nastran doublet lattice method using data from corresponding computational fluid dynamics simulations. In this paper, sensitivities associated with this aerodynamic matching technique were investigated using HCDstruct and a Boeing 737-200-like aircraft configuration. Specifically, sensitivities of the aerodynamic matching method were investigated with respect to changes in flight conditions, such as changes in Mach number and angle of attack, and also in key design variables for the main wing, such as changes in aspect ratio and sweep angle. The variations in flight conditions and design parameters were mapped to estimated prediction error in sectional lift for the main wing, which helps to demonstrate the extent to which a user may expect a given aerodynamic correction matrix to provide suitable aerodynamic predictions for a realistic aircraft wing.

Jesse Ray Quinlan↗

NASA NTRS2007

Validation of the Aura Microwave Limb Sounder middle atmosphere water vapor and nitrous oxide measurements

The quality of the version 2.2 (v2.2) middle atmosphere water vapor and nitrous oxide measurements from the Microwave Limb Sounder (MLS) on the Earth Observing System (EOS) Aura satellite is assessed. The impacts of the various sources of systematic error are estimated by a comprehensive set of retrieval simulations. Comparisons with correlative data sets from ground-based, balloon and satellite platforms operating in the UV/visible, infrared and microwave regions of the spectrum are performed. Precision estimates are also validated, and recommendations are given on the data usage. The v2.2 H2O data have been improved over v1.5 by providing higher vertical resolution in the lower stratosphere and better precision above the stratopause. The single-profile precision is ~0.2–0.3 ppmv (4–9%), and the vertical resolution is ~3–4 km in the stratosphere. The precision and vertical resolution become worse with increasing height above the stratopause. Over the pressure range 0.1–0.01 hPa the precision degrades from 0.4 to 1.1 ppmv (6–34%), and the vertical resolution degrades to ~12–16 km. The accuracy is estimated to be 0.2–0.5 ppmv (4–11%) for the pressure range 68–0.01 hPa. The scientifically useful range of the H2O data is from 316 to 0.002 hPa, although only the 82–0.002 hPa pressure range is validated here. Substantial improvement has been achieved in the v2.2 N2O data over v1.5 by reducing a significant low bias in the stratosphere and eliminating unrealistically high biased mixing ratios in the polar regions. The single-profile precision is ~13–25 ppbv (7–38%), the vertical resolution is ~4–6 km and the accuracy is estimated to be 3–70 ppbv (9–25%) for the pressure range 100–4.6 hPa. The scientifically useful range of the N2O data is from 100 to 1 hPa.

Atlas, E.↗

NASA NTRS1993

Statistical Plant Set Estimation Using Schroeder-Phased Multisinusoidal Input Design

In this paper, a frequency domain method is developed for plant set estimation.

robust↗

NASA NTRS2021

Direct Measurements of Infrared Intensities of HCN and H2O + HCN Ices for Laboratory and Observational Astrochemistry

Hydrogen cyanide (HCN) is found in a wide variety of extraterrestrial environments within and beyond the solar system, and for that reason laboratory spectroscopists have studied this compound in many spectral regions, including the infrared (IR). However, one aspect that remains to be investigated is the intrinsic IR spectral intensities of solid HCN as opposed to relative band strengths, intrinsic intensities being needed to measure HCN abundances. Here we report measurements of IR absorption coefficients and band strengths, along with supporting refractive indices and densities, of both amorphous and crystalline HCN at two temperatures, one for interstellar work and one more relevant to the outer solar system. Spectra are presented at both temperatures, along with optical constants that can be used in numerical models. Despite widespread and longstanding interest in and investigations of solid HCN, this is the first time that the properties we are reporting have been measured in a single laboratory, avoiding the need for estimates or to combine results from various authors. We find that our measured band strength of ~1 × 1017 cm molecule1 for the CN vibration of HCN, in both amorphous HCN and in an H2O-rich ice, is substantially higher than an earlier estimate. Unless errors of 100% can be tolerated then our new value requires a rescaling of earlier work. Our results shed light on why HCN and other nitriles have been so difficult to identify in the solid state, in contrast to their many detections in the gas phase.

astrochemistry – methods: laboratory – solid state↗

NASA NTRS2021

Direct Measurements of Infrared Intensities of HCN and H2O + HCN Ices for Laboratory and Observational Astrochemistry

Hydrogen cyanide (HCN) is found in a wide variety of extraterrestrial environments within and beyond the solar system, and for that reason laboratory spectroscopists have studied this compound in many spectral regions, including the infrared (IR). However, one aspect that remains to be investigated is the intrinsic IR spectral intensities of solid HCN as opposed to relative band strengths, intrinsic intensities being needed to measure HCN abundances. Here we report measurements of IR absorption coefficients and band strengths, along with supporting refractive indices and densities, of both amorphous and crystalline HCN at two temperatures, one for interstellar work and one more relevant to the outer solar system. Spectra are presented at both temperatures, along with optical constants that can be used in numerical models. Despite widespread and longstanding interest in and investigations of solid HCN, this is the first time that the properties we are reporting have been measured in a single laboratory, avoiding the need for estimates or to combine results from various authors. We find that our measured band strength of ~1 × 1017 cm molecule1 for the CN vibration of HCN, in both amorphous HCN and in an H2O-rich ice, is substantially higher than an earlier estimate. Unless errors of 100% can be tolerated then our new value requires a rescaling of earlier work. Our results shed light on why HCN and other nitriles have been so difficult to identify in the solid state, in contrast to their many detections in the gas phase.

astrochemistry – methods: laboratory – solid state↗

NASA NTRSDate not supplied

Space Needle Returns

STEP is imported into Engineering Sketch Pad. Some bodies where slightly scaled and translated in OpenCSM to create a manifold solid for the downstream meshing process. The braces at the base and columns around the core are omitted because their solids are malformed or created nonmanifold intersections. EGADS provides an initial tessellation of the surface. refine adapted the surface mesh to a curvature and feature size metric. TetGen initially filled the volume. The TetGen mesh is adapted to the Spalding Law of the Wall u+ with refine to provide the initial mesh for flow solution. Solution-based mesh adaptation is performed where FUN3D-FV computes the flow solution with the Reynolds-averaged Navier-Stokes equations coupled to the Spalart-Allmaras turbulence model. The freestream Mach number is 4 approaching 40° from the central axis of the Space Needle. The volume and surface mesh is adapted with refine to reduce estimated interpolation error in Mach number via the multiscale metric. The adapted mesh implicitly resolves the boundary layers, shocks, and expansions. The surface mesh is shown for the lee side with a slice through the volume on the left. Computational schlieren in the lower right shows density variations. A slice of the mesh is colored with Mach number in the upper right where mesh with freestream Mach number is not rendered. The volume mesh contains 64 million vertices. A NASA worm logo is sketched and extruded into a solid in OpenCSM. The worm is unioned to the Space Needle roof to produce the inset mesh image.

mesh↗

NASA NTRSDate not supplied

Aerothermodynamic Measurements in Hypersonic Non-Equilibrium Flows

High enthalpy arc-jets are unique facilities particularly suited for simulating complex flows in the aerospace field, such as the aerothermodynamics of a re-entry vehicle. Arc-jets are often used to evaluate important design factors such as heat shield materials and vehicle design. Characterization of these facilities is important, as studies often match specific in-flight environments during experiments. Due to the complex environment produced by an arc-jet, with effects such as thermodynamic and chemical non-equilibrium occurring in the flow, characterization experiments are significantly more difficult than in traditional blow-down wind tunnels. The current work aims to characterize an arc-jet facility in terms of flow temperature, velocity and unsteadiness, in a spatially-resolved analysis. To achieve this goal, a non-intrusive imaging technique called “planar laser-induced fluorescence” was performed in the NASA Langley Hypersonic Materials Environ-mental Test System arc-jet facility. The experimental data was analyzed to produce the quantitative measurements in multiple regions of the flow around a blunt body sample. A quasi-1D low fidelity solver was created to numerically simulate the flow to investigate non-equilibrium effects occur-ring outside the imaging region in the arc-jet nozzle. Unsteadiness in the test section was minimized by analyzing a subset of data assessing the gas injection location. Radial velocity, rotational temperature and translational temperature measurements are provided that can be used to validate future high-fidelity computational studies. The temperature measurements revealed rotational non-equilibrium potentially occurring in the flow. This work provides a methodology for characterizing arc-jet facilities, identifying and correcting sources of systematic error, and estimating the uncertainty associated with the quantitative measurements.

laser induced fluorescence↗

NASA NTRS2023

The Gmao Hybrid 4d-Envar Observing System Simulation Experiment Framework.

This work describes the extension of the Global Modeling and Assimilation Office (GMAO) Observing System Simulation Experiment (OSSE) framework to use a hybrid 4D-EnVar scheme instead of 3D-Var. The original 3D-Var and hybrid 4D-EnVar OSSEs use the same version of the data assimilation system (DAS) so that a direct comparison is possible in terms of the validation with respect to their corresponding real cases. Rather than quantifying the differences between the two data assimilation methodologies, a short inter-comparison of upgrading from a 3D- to a 4D-OSSE is provided to highlight aspects where this change matters to the OSSE community and to identify features of data assimilation that can only be explored in a four-dimensional OSSE framework. A short validation of the hybrid 4D-EnVar OSSE shows that conclusions from previous assessments of the 3D-Var OSSE in its ability to mimic the behavior of the real system still hold with the same caveats. Furthermore, some aspects of the ensemble configuration and behavior are discussed along with forecast sensitivity to observation impacts (FSOI). Estimates of error standard deviations are shown to be smaller in the hybrid 4D-EnVar OSSE but with little impact on the character of the error. A discussion on future work directions focuses on exploring the four-dimensional aspect such as the error distribution within the assimilation window or four-dimensional handling of high-temporal density observations.

Data assimilation↗