Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Engineering, Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Outdoor Testing of c-Si Photovoltaic Modules with Spectrally-Selective Mirrors for Operating Temperature Reduction

The efficiency of a c-Si cell drops with increasing cell temperature. A typical photovoltaic module with a c-Si cell will operate 20-30K above ambient temperature. Spectrally-selective photonic mirrors which reflect sub-bandgap light can reduce waste heat generated by parasitic absorption in the module and reduce module operating temperature. Here, a spectrally selective 4-layer and 12-layer mirror are designed and fabricated on module cover glass. When integrated into modules, these mirrors reduce the operating temperature of the module by 0.16K and 1.5K, respectively when compared to a module with bare outer glass.

14 SOLAR ENERGY↗
DOE OSTI2020

Decay of Electrostatic Force of Dust Particles on Photovoltaic Modules

Photovoltaic (PV) energy yield loss due to solar module soiling has become increasingly important as solar module deployment is now at the hundreds of gigawatts scale and continues to grow rapidly. We have reported on direct measurements-using atomic force microscopy (AFM)-of strong electric-field-induced attraction and adhesion force (Fes) of dust particles onto solar panel that are 1 to 2 orders of magnitude stronger than the van der Waals and water capillary forces, corroborated by observing the increase in system voltage-induced soiling rate. Here, we report another characteristic of Fes on soiling-long lasting or slow decay after turning off the high voltage applied to solar panels. The Fes decay time varies in a wide time range of 1 to 10 hours, depending on two factors: 1) either/both the cell or/and particle were charged with high voltage before the voltages were turned off; and 2) how the cell was connected to the ground after the voltage was turned off-either connected through the power supply electronics, directly connected to the ground, or electrically floated. The Fes decay is understood in terms of 1) net electrical charge dissipations in both particle and cell, 2) thermal disordering of dipole polarization in the module glass dielectrics, and 3) charge redistribution by the electrostatic interaction of particle and module glass. This long-lasting Fes for hours can significantly affect the solar panel soiling after sunset, especially combined with water condensation.

14 SOLAR ENERGY↗
DOE OSTI2020

Indoor and Outdoor Test Results for 'DUSST', a Low-Cost, Low-Maintenance PV Soiling Sensor

Soiling can cause significant losses to photovoltaic systems, and therefore it is often measured for the purposes of predicting long-term energy forecasts or for monitoring real time performance and triggering maintenance events as needed. Currently, the most common soiling monitoring technologies are soiling stations that use the electrical outputs of a regularly cleaned PV device and of a naturally soiled PV device to quantify soiling. As part of a new class of low-cost and low-maintenance soiling stations NREL has previously presented 'DUSST'. DUSST projects a collimated monochromatic light source through a glass surface (exposed similarly to the PV modules that need to be monitored) and on to a light detector to measure the intensity of the transmitted light. As the glass surface naturally soils, the losses are quantified by comparing this soiled reading with a calibrated reading under baseline clean condition. This work presents the ongoing improvement of DUSST and the ongoing indoor and outdoor validation of this new soiling sensor.

14 SOLAR ENERGY↗
DOE OSTI2020

Understanding PV Polymer Backsheet Degradation through X-Ray Scattering

Understanding how photovoltaic (PV) module backsheet polymers age and degrade in response to environmental stresses is important for designing polymers that can maintain their structural integrity after decades of outdoor use. X-ray scattering is a powerful technique for exploring backsheet polymer structure at the angstrom- (wide-angle, WAXS) and nanometer- (small-angle, SAXS) length-scales. We present the use of SAXS and WAXS to study pristine and aged polymer backsheets. The structural insight from these techniques can be used to compare the degradation induced by accelerated testing with the degradation seen in field-aged PV materials.

14 SOLAR ENERGY↗
DOE OSTI2020

Laser Cutting and Micromachining for Localized and Targeted Solar Cell Characterization

Laser cutting and micromachining can be applied to solar cell materials for processing and characterization applications. An ultrashort pulse (USP) laser with sub-picosecond pulse width can remove material with minimal thermal effects or damage, which is termed `cold ablation'. Such USP laser cutting and scribing can be implemented for isolating areas within a larger cell while maintaining electrical performance and preventing laser-induced damage and shunting. Laser micromachining has been used to isolate a shunt to improve cell performance and to isolate a small, selected area to define a sample suitable for deep level transient spectroscopy.

14 SOLAR ENERGY↗
DOE OSTI2020

The Effects of Absorber Thickness on Reverse-Bias Damage in Cu(In,Ga)Se2 Solar Cells

We studied a variety of absorber thicknesses in Cu(In,Ga)Se 2 devices to examine the ability of the cell to withstand reverse current flow without damage. Absorbers were varied from 2.5 um to 0.4 um, with the expectation that larger reverse current would be allowed to flow at lower voltages as absorbers were made thinner. Our initial experiments showed promise. However, as the efficiency of thin devices was improved, the reverse current allowed at a given voltage decreased. Here we present our negative results on the ability of thin devices to allow higher reverse currents at lower voltages. We also give details on our procedures for reverse-bias testing small-area solar cells. We hope this information will be useful for those who want to study reverse-bias at the cell level.

14 SOLAR ENERGY↗
DOE OSTI2020

Oxidative Segregation of Group V Dopants in CdTe Solar Cells

Transparent conductive oxides are used in many technologies and it is important to understand their interfacial chemical reactions. Here, we use recently developed thermomechanical cleaving and X-ray photoelectron spectroscopy to probe oxidation states at the SnO 2 interface of CdTe solar cells. We show that tin oxide promotes the formation of nanometer-scale oxides of tellurium and sulfur, largely during CdCl 2 /O 2 activation. Surprisingly, in copper-doped devices, relatively low temperature anneals (180-260 degrees C) to diffuse and activate copper acceptors also cause significant oxidation changes at the front interface, providing a heretofore missing aspect of how back contact processes can modify device transport, recombination, and performance. For Group V-doped devices, this same oxidation process causes segregation of the dopants to the SnO 2 interface in their oxidized states, implying that adjacent regions in the absorber have been depleted of dopants. Intriguingly, we demonstrate that because of their layered, van der Walls-bonded crystal structure, spatially segregated Group V oxides may represent a mechanically weak layer in a finished device.

14 SOLAR ENERGY↗
DOE OSTI2023

Development of HVPE-Grown III-V Solar Cells Passivated with AlInP

We present the first AlInP-passivated solar cells grown by dynamic hydride vapor phase epitaxy (D-HVPE). Single junction (1J) GaAs and GaInP/GaAs (2J) tandems with AlInP passivation achieve AM1.5G efficiencies of 26.0% and 28.5%, respectively, which are the highest reported efficiencies for HVPE-grown devices of each type. 1J devices passivated with either AlInP or GaInP exhibit similar VOC and long wavelength current collection, indicating that both windows provide similar passivation. Adding AlInP passivation to the 2J solar cell improves the VOC by -50 mV relative to the device passivated by a GaInP emitter. These achievements remove one of the last barriers limiting parity of HVPE device efficiencies with state-of-the-art.

AlInP↗
DOE OSTI2022

Reference Cell Performance and Modeling on a One-Axis Tracking Surface: Preprint

Performance of five silicon-based reference cells is examined on a single-axis tracking surface. The reference cells' output are modeled using one-minute sampled spectral irradiance and reference cell temperature measurements. The model also incorporates spectral responsivity data for the reference cell. The transmission of light through the glazing multiplies the sum over all appropriate wavelengths of temperature adjusted reference cell responsivity times the measured spectral irradiance. Modeled reference cell output is compared with measured reference cell output under clear sky and totally cloudy sky conditions. For each reference cell the ratio of modeled to measured output varies by less than 2% over the year.

modeling↗
DOE OSTI2020

A Framework for Evaluating the Resilience Contribution of Solar PV and Battery Storage on the Grid

Motivated by decreased cost and climate change concerns, penetration of solar photovoltaic (PV) and battery energy storage has been continually increasing. The variability in solar generation assets has led to many challenges for utilities and researchers. Therefore, there is increasing interest in the area of resilience of the grid and contribution from its assets. This paper describes a proposed framework for evaluating the resilience contribution of solar generation and battery storage. The metric provides a quantifiable adaptive capacity measure with uncertainty for the contribution assets proved to the bulk grid. A case study using long and short-term solar generation, with and without battery storage, demonstrates the framework and provides useful insight to the resilience solar and battery storage assets contribute.

14 SOLAR ENERGY↗